Process evaluation and kinetic analysis of 3D-printed monoliths comprised of CaO and Cr/H-ZSM-5 in combined CO2 Capture-C2H6 oxidative dehydrogenation to C2H4

Directly Printed Oxide/ZSM-5 Bifunctional Catalysts for Methanol Conversion to Dimethyl Ether with Exceptional Stability, Conversion, and Selectivity

(2021) Fatima Magzoub et al.   ENERGY & FUELS

Strategies for Integrated Capture and Conversion of CO 2 from Dilute Flue Gases and the Atmosphere

(2021) James W. Maina et al.   ChemSusChem

Metal-Doped K–Ca Double Salts with Improved Capture Performance and Stability for High-Temperature CO2 Adsorption

(2021) Turki Alghamdi et al.   ENERGY & FUELS

Highly-Dispersed Zinc Species on Zeolites for the Continuous and Selective Dehydrogenation of Ethane with CO2 as a Soft Oxidant

(2021) Jiaxu Liu et al.   ACS Catalysis

Recent Advances in 3D Printing of Structured Materials for Adsorption and Catalysis Applications

(2021) Shane Lawson et al.   CHEMICAL REVIEWS

Structured Bifunctional Catalysts for CO2 Activation and Oxidative Dehydrogenation of Propane

(2021) Shane Lawson et al.   ACS Sustainable Chemistry & Engineering

Assessment of CO2/CH4 Separation Performance of 3D-Printed Carbon Monoliths in Pressure Swing Adsorption

(2021) Shane Lawson et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Effects of Process Parameters on CO2/H2 Separation Performance of 3D-Printed MOF-74 Monoliths

(2021) Shane Lawson et al.   ACS Sustainable Chemistry & Engineering

Dehydrogenation of Ethane to Ethylene by CO2 over Highly Dispersed Cr on Large-Pore Mesoporous Silica Catalysts

(2020) Abdulrhman S. Al-Awadi et al.   Catalysts

Feasibility Study of Combining Direct Air Capture of CO2 and Methanation at Isothermal Conditions with Dual Function Materials

(2020) Chae Jeong-Potter et al.   APPLIED CATALYSIS B-ENVIRONMENTAL

The effects of cell density and intrinsic porosity on structural properties and adsorption kinetics in 3D-printed zeolite monoliths

(2020) Shane Lawson et al.   CHEMICAL ENGINEERING SCIENCE

3D printed catalytic converters with enhanced activity for low-temperature methane oxidation in dual-fuel engines

(2020) Saeed Hajimirzaee et al.   FUEL

Interfacial Active Sites for CO2 Assisted Selective Cleavage of C–C/C–H Bonds in Ethane

(2020) Zhenhua Xie et al.   Chem

Ru-Ba synergistic effect in dual functioning materials for cyclic CO2 capture and methanation

(2020) Alessandro Porta et al.   APPLIED CATALYSIS B-ENVIRONMENTAL

Dual-Function Materials for CO2 Capture and Conversion: A Review

(2020) Ibeh S. Omodolor et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Direct Ink Writing of Metal Oxide/H-ZSM-5 Catalysts for n-Hexane Cracking: A New Method of Additive Manufacturing with High Metal Oxide Loading

(2020) Shane Lawson et al.   ACS Applied Materials & Interfaces

Customizable Heterogeneous Catalysts: Nonchanneled Advanced Monolithic Supports Manufactured by 3D-Printing for Improved Active Phase Coating Performance

(2020) Cristian Y. Chaparro-Garnica et al.   ACS Applied Materials & Interfaces

Tuning surface V5+ concentration in M1 phase MoVSbOx catalysts for ethylene production from ethane through oxidative dehydrogenation reaction

(2020) Chunyu Xin et al.   APPLIED CATALYSIS A-GENERAL

Oxidative dehydrogenation of ethane to ethylene in an integrated CO2 capture-utilization process

(2020) Ahmed Al-Mamoori et al.   APPLIED CATALYSIS B-ENVIRONMENTAL

A Novel Method of 3D Printing High‐Loaded Oxide/H‐ZSM‐5 Catalyst Monoliths for Carbon Dioxide Reduction in Tandem with Propane Dehydrogenation

(2020) Shane Lawson et al.   Advanced Sustainable Systems

Binderless zeolite monoliths production with sacrificial biopolymers

(2020) Shane Lawson et al.   CHEMICAL ENGINEERING JOURNAL

Amine-Functionalized MIL-101 Monoliths for CO2 Removal from Enclosed Environments

(2019) Shane Lawson et al.   ENERGY & FUELS

3D-printed ZSM-5 monoliths with metal dopants for methanol conversion in the presence and absence of carbon dioxide

(2019) Fatima Magzoub et al.   APPLIED CATALYSIS B-ENVIRONMENTAL

Role of TiO2 nanoparticle modification of Cr/MCM41 catalyst to enhance Cr-support interaction for oxidative dehydrogenation of ethane with carbon dioxide

(2019) Abdulrhman S. Al-Awadi et al.   APPLIED CATALYSIS A-GENERAL

Carbon dioxide reduction in tandem with light-alkane dehydrogenation

(2019) Elaine Gomez et al.   Nature Reviews Chemistry

Bimetallic catalysts for CO2 capture and hydrogenation at simulated flue gas conditions

(2019) Martha A. Arellano-Treviño et al.   CHEMICAL ENGINEERING JOURNAL

Improved Catalytic Performance of Ethane Dehydrogenation in the Presence of CO2 over Zr-Promoted Cr/SiO2

(2019) Xinyi Li et al.   ACS Omega

Oxidative dehydrogenation of propane to propylene with carbon dioxide

(2018) Marktus A. Atanga et al.   APPLIED CATALYSIS B-ENVIRONMENTAL

Oxidative dehydrogenation of ethane with CO 2 over CrO x catalysts supported on Al 2 O 3 , ZrO 2 , CeO 2 and Ce x Zr 1-x O 2

(2018) Tatiana A. Bugrova et al.   CATALYSIS TODAY

Catalytic cracking of n -hexane for producing light olefins on 3D-printed monoliths of MFI and FAU zeolites

(2018) Xin Li et al.   CHEMICAL ENGINEERING JOURNAL

Combining CO2 Reduction with Ethane Oxidative Dehydrogenation by Oxygen-Modification of Molybdenum Carbide

(2018) Siyu Yao et al.   ACS Catalysis

Active sites for tandem reactions of CO2reduction and ethane dehydrogenation

(2018) Binhang Yan et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Methanol-to-olefin conversion on 3D-printed ZSM-5 monolith catalysts: Effects of metal doping, mesoporosity and acid strength

(2018) Xin Li et al.   MICROPOROUS AND MESOPOROUS MATERIALS

Enhanced dispersion of Cr nanoparticles over nanostructured ZrO 2 -doped ZSM-5 used in CO 2 -oxydehydrogenation of ethane

(2017) Farhad Rahmani et al.   MICROPOROUS AND MESOPOROUS MATERIALS

Carbon Capture and Utilization Update

(2017) Ahmed Al-Mamoori et al.   Energy Technology

Reforming and oxidative dehydrogenation of ethane with CO 2 as a soft oxidant over bimetallic catalysts

(2016) MyatNoeZin Myint et al.   JOURNAL OF CATALYSIS

Dry Reforming of Ethane and Butane with CO2 over PtNi/CeO2 Bimetallic Catalysts

(2016) Binhang Yan et al.   ACS Catalysis

CO 2 utilization with a novel dual function material (DFM) for capture and catalytic conversion to synthetic natural gas: An update

(2016) Melis S. Duyar et al.   Journal of CO2 Utilization

Effect of the chromium precursor nature on the physicochemical and catalytic properties of Cr–ZSM-5 catalysts: Application to the ammoxidation of ethylene

(2011) F. Ayari et al.   JOURNAL OF MOLECULAR CATALYSIS A-CHEMICAL

Comparison of Traditional and Structured Adsorbents for CO2Separation by Vacuum-Swing Adsorption

(2010) Fateme Rezaei et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Overall mass transfer coefficients and controlling regimes in catalytic monoliths

(2009) Saurabh Y. Joshi et al.   CHEMICAL ENGINEERING SCIENCE