Study of the effect of the aspect ratio of a cylindrical lithium-ion battery enclosure in an air-cooled thermal management system

Design of Robust, Lithiophilic, and Flexible Inorganic‐Polymer Protective Layer by Separator Engineering Enables Dendrite‐Free Lithium Metal Batteries with LiNi 0.8 Mn 0.1 Co 0.1 O 2 Cathode

(2021) Liwen Tan et al.   Small

Analysis of the unsteady thermal response of a Li-ion battery pack to dynamic loads

(2021) Ali Saeed et al.   ENERGY

Numerical Investigation of Natural Convection and Irreversibilities between Two Inclined Concentric Cylinders in Presence of Uniform Magnetic Field and Radiation

(2021) Ahmad Hajatzadeh Pordanjani et al.   HEAT TRANSFER ENGINEERING

Renewable energy as a determinant of inter-country differentials in CO2 emissions in Africa

(2021) Ambe J. Njoh   RENEWABLE ENERGY

Caged biomass carbon with anchoring MoO2/NC Nanospheres: Synergistic enhancement of potassium ion storage and electrochemical performance

(2021) Mengmeng Yang et al.   APPLIED SURFACE SCIENCE

Intensification of ultra-lean catalytic combustion of methane in microreactors by boundary layer interruptions – A computational study

(2021) Graeme Hunt et al.   CHEMICAL ENGINEERING SCIENCE

Nanofluids: Physical phenomena, applications in thermal systems and the environment effects- a critical review

(2021) Ahmad Hajatzadeh Pordanjani et al.   Journal of Cleaner Production

Multivariate Optimization and Sensitivity Analyses of Relevant Parameters on Efficiency of Scraped Surface Heat Exchanger

(2020) Ahmad Hajatzadeh Pordanjani et al.   APPLIED THERMAL ENGINEERING

On the unsteady forced convection in porous media subject to inlet flow disturbances-A pore-scale analysis

(2020) Rabeeah Habib et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

A pore-scale assessment of the dynamic response of forced convection in porous media to inlet flow modulations

(2020) Rabeeah Habib et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Investigation of 2D and 3D Configurations of Fins and their Effects on Heat Sink Efficiency of MHD Hybrid Nanofluid with Slip and Non-Slip Flow

(2020) Man-Wen Tian et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Flammability parameters of lithium-ion battery electrolytes

(2020) A. Swiderska-Mocek et al.   JOURNAL OF MOLECULAR LIQUIDS

Reducing CO2 emissions in OECD countries: Do renewable and nuclear energy matter?

(2020) Kais Saidi et al.   PROGRESS IN NUCLEAR ENERGY

Construction of pseudocapacitive Li2-xLaxZnTi3O8 anode for fast and super-stable lithium storage

(2020) Zhongxue Zhang et al.   CERAMICS INTERNATIONAL

A Machine Learning Approach to Predicting the Heat Convection and Thermodynamics of an External Flow of Hybrid Nanofluid

(2020) Rasool Alizadeh et al.   JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME

Analysis of transport from cylindrical surfaces subject to catalytic reactions and non-uniform impinging flows in porous media

(2019) Rasool Alizadeh et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Experimental study on the thermal management performance of air cooling for high energy density cylindrical lithium-ion batteries

(2019) Yuqian Fan et al.   APPLIED THERMAL ENGINEERING

Effects of radiation and magnetic field on mixed convection stagnation-point flow over a cylinder in a porous medium under local thermal non-equilibrium

(2019) Rasool Alizadeh et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

An updated review on application of nanofluids in heat exchangers for saving energy

(2019) Ahmad Hajatzadeh Pordanjani et al.   ENERGY CONVERSION AND MANAGEMENT

Techno-economic assessment and optimization of a hybrid renewable earth - air heat exchanger coupled with electric boiler, hydrogen, wind and PV configurations

(2019) Mohammad Reza Akhtari et al.   RENEWABLE ENERGY

Effect of a novel clay/silica nanocomposite on water-based drilling fluids: Improvements in rheological and filtration properties

(2018) Goshtasp Cheraghian et al.   COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS

Homogenized modeling and micromechanics analysis of thin-walled lattice plate structures for brake discs

(2018) Aminreza Karamoozian et al.   JOURNAL OF SANDWICH STRUCTURES & MATERIALS

Sensitivity analysis of the equal angle divider mechanism kinematics with the synthesis of the joint gap tolerances

(2018) Aminreza Karamoozian et al.   MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES

Reversible calcium alloying enables a practical room-temperature rechargeable calcium-ion battery with a high discharge voltage

(2018) Meng Wang et al.   Nature Chemistry

Effects of graphene oxide‑silicon oxide hybrid nanomaterials on rheological behavior of water at various time durations and temperatures: Synthesis, preparation and stability

(2018) Ramin Ranjbarzadeh et al.   POWDER TECHNOLOGY

Squeal analysis of thin-walled lattice brake disc structure

(2018) Aminreza Karamoozian et al.   MATERIALS & DESIGN

Numerical Investigation of Heat Transfer in a Power-Law Non-Newtonian Fluid in a C-Shaped Cavity with Magnetic Field effect using Finite Difference Lattice Boltzmann Method

(2018) Saeed Aghakhani et al.   COMPUTERS & FLUIDS

Viscosity and rheological properties of antifreeze based nanofluid containing hybrid nano-powders of MWCNTs and TiO2 under different temperature conditions

(2018) Mohammad Hemmat Esfe et al.   POWDER TECHNOLOGY

Effects of magnetic field on the convective heat transfer rate and entropy generation of a nanofluid in an inclined square cavity equipped with a conductor fin: Considering the radiation effect

(2018) Abdulwahab A. Alnaqi et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Develop 24 dissimilar ANNs by suitable architectures & training algorithms via sensitivity analysis to better statistical presentation: Measure MSEs between targets & ANN for Fe–CuO/Eg–Water nanofluid

(2018) Mehrdad Bahrami et al.   PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS

Application of a novel biological nanofluid in a liquid block heat sink for cooling of an electronic processor: Thermal performance and irreversibility considerations

(2017) Mehdi Bahiraei et al.   ENERGY CONVERSION AND MANAGEMENT

Non-Equilibrium Thermodynamic Analysis of Double Diffusive, Nanofluid Forced Convection in Catalytic Microreactors with Radiation Effects

(2017) Lilian Govone et al.   Entropy

Heat transfer study of phase change materials with graphene nano particle for thermal energy storage

(2017) Karunesh Kant et al.   SOLAR ENERGY

Carbon-Coated Porous Aluminum Foil Anode for High-Rate, Long-Term Cycling Stability, and High Energy Density Dual-Ion Batteries

(2016) Xuefeng Tong et al.   ADVANCED MATERIALS

Battery state of health estimation: a structured review of models, methods and commercial devices

(2016) Lucian Ungurean et al.   INTERNATIONAL JOURNAL OF ENERGY RESEARCH

A review on phase change material (PCM) for sustainable passive cooling in building envelopes

(2016) Hussein Akeiber et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

A hybrid thermal management system for lithium ion batteries combining phase change materials with forced-air cooling

(2015) Ziye Ling et al.   APPLIED ENERGY

Experiment and simulation of a LiFePO 4 battery pack with a passive thermal management system using composite phase change material and graphite sheets

(2015) Chunjing Lin et al.   JOURNAL OF POWER SOURCES

Thermal management optimization of an air-cooled Li-ion battery module using pin-fin heat sinks for hybrid electric vehicles

(2015) Shahabeddin K. Mohammadian et al.   JOURNAL OF POWER SOURCES

A Comparative Testing Study of Commercial 18650-Format Lithium-Ion Battery Cells

(2015) V. Muenzel et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Numerical Modeling of Submodule Heat Transfer With Phase Change Material for Thermal Management of Electric Vehicle Battery Packs

(2015) N. Javani et al.   Journal of Thermal Science and Engineering Applications

Modeling of passive thermal management for electric vehicle battery packs with PCM between cells

(2014) N. Javani et al.   APPLIED THERMAL ENGINEERING

Review on Heat Transfer Mechanisms and Characteristics in Encapsulated PCMs

(2014) Shuli Liu et al.   HEAT TRANSFER ENGINEERING

NUMERICAL SIMULATION OF ELECTRICALLY CONDUCTING FLUID FLOW AND FREE CONVECTIVE HEAT TRANSFER IN AN ANNULUS ON APPLYING A MAGNETIC FIELD

(2014) Masoud Afrand et al.   HEAT TRANSFER RESEARCH

Numerical model of the passive thermal management system for high-power lithium ion battery by using porous metal foam saturated with phase change material

(2014) Z.G. Qu et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Phase-change materials to improve solar panel's performance

(2013) Pascal Henry Biwole et al.   ENERGY AND BUILDINGS

Experimental and numerical investigation of melting of phase change material/nanoparticle suspensions in a square container subjected to a constant heat flux

(2013) Nabeel S. Dhaidan et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Modeling phase change materials embedded in building enclosure: A review

(2013) Saleh Nasser AL-Saadi et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Modeling phase change materials behavior in building applications: Comments on material characterization and model validation

(2012) Yvan Dutil et al.   RENEWABLE ENERGY

Lithium ion battery production

(2011) Antti Väyrynen et al.   JOURNAL OF CHEMICAL THERMODYNAMICS

A review of power battery thermal energy management

(2011) Zhonghao Rao et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS)

(2009) Francis Agyenim et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Review on thermal energy storage with phase change materials and applications

(2008) Atul Sharma et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Phase change materials for smart textiles – An overview

(2007) S. Mondal   APPLIED THERMAL ENGINEERING