Design of Robust, Lithiophilic, and Flexible Inorganic‐Polymer Protective Layer by Separator Engineering Enables Dendrite‐Free Lithium Metal Batteries with LiNi 0.8 Mn 0.1 Co 0.1 O 2 Cathode

Enabling SiOx/C Anode with High Initial Coulombic Efficiency through a Chemical Pre-Lithiation Strategy for High Energy Density Lithium-Ion Batteries

(2020) Ming-Yan Yan et al.   ACS Applied Materials & Interfaces

Realizing Dendrite-Free Lithium Deposition with a Composite Separator

(2020) Jun Yan et al.   NANO LETTERS

A Powder Metallurgic Approach toward High‐Performance Lithium Metal Anodes

(2020) Kaiqiang Qin et al.   Small

Progress on Lithium Dendrite Suppression Strategies from the Interior to Exterior by Hierarchical Structure Designs

(2020) Lu Shen et al.   Small

Preparation and Properties of an Alginate-Based Fiber Separator for Lithium-Ion Batteries

(2020) Liwen Tan et al.   ACS Applied Materials & Interfaces

Laser‐Induced Silicon Oxide for Anode‐Free Lithium Metal Batteries

(2020) Weiyin Chen et al.   ADVANCED MATERIALS

In Situ Observation of Lithiation and Delithiation Reactions of a Silicon Thin Film Electrode for All-Solid-State Lithium-Ion Batteries by X-ray Photoelectron Spectroscopy

(2020) Raimu Endo et al.   Journal of Physical Chemistry Letters

Molecular design for electrolyte solvents enabling energy-dense and long-cycling lithium metal batteries

(2020) Zhiao Yu et al.   Nature Energy

Flexible nanocellulose enhanced Li+ conducting membrane for solid polymer electrolyte

(2020) Hengfei Qin et al.   Energy Storage Materials

An Anionic‐MOF‐Based Bifunctional Separator for Regulating Lithium Deposition and Suppressing Polysulfides Shuttle in Li–S Batteries

(2020) Ziqi Wang et al.   Small Methods

A “dendrite-eating” separator for high-areal-capacity lithium-metal batteries

(2020) Xiao Chen et al.   Energy Storage Materials

Recently advances and perspectives of anode-free rechargeable batteries

(2020) Yuan Tian et al.   Nano Energy

Two-dimensional molecular brush-functionalized porous bilayer composite separators toward ultrastable high-current density lithium metal anodes

(2019) Chuanfa Li et al.   Nature Communications

Bulk Nanostructured Materials Design for Fracture-Resistant Lithium Metal Anodes

(2019) Shan Liu et al.   ADVANCED MATERIALS

Long Cycle Life Lithium Metal Batteries Enabled with Upright Lithium Anode

(2019) Yuqing Chen et al.   ADVANCED FUNCTIONAL MATERIALS

Facile Generation of Polymer-Alloy Hybrid Layer towards Dendrite-free Lithium Metal Anode with Improved Moisture Stability

(2019) Jia Xie et al.   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

High-Performance Lithiated SiOx Anode Obtained by a Controllable and Efficient Prelithiation Strategy

(2019) Qinghai Meng et al.   ACS Applied Materials & Interfaces

Ultrathin Bilayer of Graphite/SiO 2 as Solid Interface for Reviving Li Metal Anode

(2019) Rajesh Pathak et al.   Advanced Energy Materials

Dendrite‐Free Lithium Plating Induced by In Situ Transferring Protection Layer from Separator

(2019) Zhiyu Hu et al.   ADVANCED FUNCTIONAL MATERIALS

Novel Organophosphate‐Derived Dual‐Layered Interface Enabling Air‐Stable and Dendrite‐Free Lithium Metal Anode

(2019) Xuejun Liu et al.   ADVANCED MATERIALS

Facile and scalable synthesis of SiOx materials for Li-ion negative electrodes

(2019) Junesun Hwang et al.   JOURNAL OF POWER SOURCES

Designing a Multifunctional Separator for High‐Performance Li–S Batteries at Elevated Temperature

(2019) Yibo He et al.   Small

Dual-Layered Film Protected Lithium Metal Anode to Enable Dendrite-Free Lithium Deposition

(2018) Chong Yan et al.   ADVANCED MATERIALS

A Flexible Solid Electrolyte Interphase Layer for Long-Life Lithium Metal Anodes

(2018) Nian-Wu Li et al.   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

New perspective to understand the effect of electrochemical prelithiation behaviors on silicon monoxide

(2018) Chengxu Shen et al.   RSC Advances

Vacuum distillation derived 3D porous current collector for stable lithium–metal batteries

(2018) Yongling An et al.   Nano Energy

Reviving the lithium metal anode for high-energy batteries

(2017) Dingchang Lin et al.   Nature Nanotechnology

Three-dimensional stable lithium metal anode with nanoscale lithium islands embedded in ionically conductive solid matrix

(2017) Dingchang Lin et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Functional membrane separators for next-generation high-energy rechargeable batteries

(2017) Yuede Pan et al.   National Science Review

Metallurgically lithiated SiOxanode with high capacity and ambient air compatibility

(2016) Jie Zhao et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Selective deposition and stable encapsulation of lithium through heterogeneous seeded growth

(2016) Kai Yan et al.   Nature Energy

Atomic-Level Understanding toward a High-Capacity and High-Power Silicon Oxide (SiO) Material

(2015) Sung Chul Jung et al.   Journal of Physical Chemistry C

Structural and Mechanistic Insights into Fast Lithium-Ion Conduction in Li4SiO4–Li3PO4 Solid Electrolytes

(2015) Yue Deng et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

A Thermally Conductive Separator for Stable Li Metal Anodes

(2015) Wei Luo et al.   NANO LETTERS

Lithium Polyacrylate (LiPAA) as an Advanced Binder and a Passivating Agent for High-Voltage Li-Ion Batteries

(2015) Nicholas P. W. Pieczonka et al.   Advanced Energy Materials

An XPS/AES comparative study of the surface behaviour of nano-silicon anodes for Li-ion batteries

(2014) Etienne Radvanyi et al.   JOURNAL OF ANALYTICAL ATOMIC SPECTROMETRY

Inverse Opal-Inspired, Nanoscaffold Battery Separators: A New Membrane Opportunity for High-Performance Energy Storage Systems

(2014) Jung-Hwan Kim et al.   NANO LETTERS

Dry-air-stable lithium silicide–lithium oxide core–shell nanoparticles as high-capacity prelithiation reagents

(2014) Jie Zhao et al.   Nature Communications

Improved Performances of Nanosilicon Electrodes Using the Salt LiFSI: A Photoelectron Spectroscopy Study

(2013) Bertrand Philippe et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Hollow Porous SiO2 Nanocubes Towards High-performance Anodes for Lithium-ion Batteries

(2013) Nan Yan et al.   Scientific Reports

A Highly Cross-Linked Polymeric Binder for High-Performance Silicon Negative Electrodes in Lithium Ion Batteries

(2012) Bonjae Koo et al.   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

Mussel- and Diatom-Inspired Silica Coating on Separators Yields Improved Power and Safety in Li-Ion Batteries

(2012) Sung Min Kang et al.   CHEMISTRY OF MATERIALS

Nanosilicon Electrodes for Lithium-Ion Batteries: Interfacial Mechanisms Studied by Hard and Soft X-ray Photoelectron Spectroscopy

(2012) Bertrand Philippe et al.   CHEMISTRY OF MATERIALS

Highly stable Si-based multicomponent anodes for practical use in lithium-ion batteries

(2012) Jung-In Lee et al.   Energy & Environmental Science

Multifunctional TiO2 coating for a SiO anode in Li-ion batteries

(2012) Goojin Jeong et al.   JOURNAL OF MATERIALS CHEMISTRY

High-performance porous silicon monoxide anodes synthesized via metal-assisted chemical etching

(2012) Jung-In Lee et al.   Nano Energy

Prelithiated Silicon Nanowires as an Anode for Lithium Ion Batteries

(2011) Nian Liu et al.   ACS Nano

Lithium-ion batteries. A look into the future

(2011) Bruno Scrosati et al.   Energy & Environmental Science

Particle size-dependent, tunable porous structure of a SiO2/poly(vinylidene fluoride-hexafluoropropylene)-coated poly(ethylene terephthalate) nonwoven composite separator for a lithium-ion battery

(2011) Eun-Sun Choi et al.   JOURNAL OF MATERIALS CHEMISTRY

Advanced Materials for Energy Storage

(2010) Chang Liu et al.   ADVANCED MATERIALS

Characterizations and electrochemical behaviors of disproportionated SiO and its composite for rechargeable Li-ion batteries

(2010) Cheol-Min Park et al.   JOURNAL OF MATERIALS CHEMISTRY

Electrochemical behavior of a lithium-pre-doped carbon-coated silicon monoxide anode cell

(2008) Il Won Seong et al.   JOURNAL OF POWER SOURCES