Investigation on the effect of the flow passage geometry of diesel injector nozzle on injection process parameters and engine performances
Published 2022 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Investigation on the effect of the flow passage geometry of diesel injector nozzle on injection process parameters and engine performances
Authors
Keywords
-
Journal
Energy Science & Engineering
Volume 10, Issue 2, Pages 552-577
Publisher
Wiley
Online
2022-01-03
DOI
10.1002/ese3.1051
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Three-component multi-fluid modeling of pseudo-cavitation phenomenon in diesel injector nozzles
- (2021) Rohit Mishra et al. International Journal of Engine Research
- Investigation of the Performances of a Diesel Engine Operating on Blended and Emulsified Biofuels from Rapeseed Oil
- (2021) Vladimir Anatolyevich Markov et al. Energies
- Limit of Fuel Injection Rate in the Common Rail System under Ultra-High Pressures
- (2020) Jianhui Zhao et al. INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY
- The Effect of Elliptical Diesel Nozzles on Spray Liquid-Phase Penetration under Evaporative Conditions
- (2020) Bifeng Yin et al. Energies
- A brief review of numerical solving methods for internal fluid of pumped storage unit
- (2020) Xiuli Mao et al. INTERNATIONAL JOURNAL OF ENERGY RESEARCH
- Stereoscopic high-speed microscopy to understand transient internal flow processes in high-pressure nozzles
- (2020) J. Manin et al. EXPERIMENTAL THERMAL AND FLUID SCIENCE
- Computational study on the influence of nozzle eccentricity in spray formation by means of Eulerian Σ - Y coupled simulations in diesel injection nozzles
- (2020) F.J. Salvador et al. INTERNATIONAL JOURNAL OF MULTIPHASE FLOW
- High pressure/high temperature multiphase simulations of dodecane injection to nitrogen: Application on ECN Spray-A
- (2020) Phoevos Koukouvinis et al. FUEL
- Numerical investigation of the effect of multi-walled carbon nanotube additive on nozzle flow and spray behaviors of diesel fuel
- (2020) Bowen Sa et al. FUEL
- A numerical study of the effect of spiral counter grooves on a needle on flow turbulence in a diesel injector
- (2020) Bowen Sa et al. FUEL
- Turbulent heat transfer characteristics of supercritical n ‐decane in a vertical tube under various operating pressures
- (2019) Yong Li et al. INTERNATIONAL JOURNAL OF ENERGY RESEARCH
- Performance analysis of a novel eco‐friendly internal combustion engine cycle
- (2019) Guven Gonca et al. INTERNATIONAL JOURNAL OF ENERGY RESEARCH
- A numerical study on the effect of cavitation erosion in a Diesel injector
- (2019) Marco Cristofaro et al. APPLIED MATHEMATICAL MODELLING
- Experimental Studies of Fuel Injection in a Diesel Engine with an Inclined Injector
- (2019) V. G. Kamaltdinov et al. Energies
- Comparisons of advanced combustion technologies (HCCI, PCCI, and dual-fuel PCCI) on engine performance and emission characteristics in a heavy-duty diesel engine
- (2019) Euijoon Shim et al. FUEL
- Visualization research on influence of ambient pressure on CNG jet characteristics of gas injector with outward-opening nozzle
- (2019) Jianhui Zhao et al. FUEL
- Investigation of cavitation and air entrainment during pilot injection in real-size multi-hole diesel nozzles
- (2019) Eduardo Gomez Santos et al. FUEL
- Experimental study on the effect of vortex cavitation in scaled-up diesel injector nozzles and spray characteristics
- (2019) Tianyi Cao et al. EXPERIMENTAL THERMAL AND FLUID SCIENCE
- Experimental investigation of the effect of orifices inclination angle in multihole diesel injector nozzles. Part 2 – Spray characteristics
- (2018) R. Payri et al. FUEL
- Experimental study on the spray characteristics discharging from elliptical diesel nozzle at typical diesel engine conditions
- (2018) Shenghao Yu et al. FUEL
- Analysis on the effects of turbulent inflow conditions on spray primary atomization in the near-field by direct numerical simulation
- (2018) F.J. Salvador et al. INTERNATIONAL JOURNAL OF MULTIPHASE FLOW
- Comparative study of flow characteristics within asymmetric multi hole VCO and SAC nozzles
- (2017) Adams Moro et al. ENERGY CONVERSION AND MANAGEMENT
- Numerical study of the internal flow and initial mixing of diesel injector nozzles with V-type intersecting holes
- (2017) Xianyin Leng et al. FUEL
- Numerical investigation on the hydrodynamics of the internal flow and spray behavior of diesel fuel in a conical nozzle orifice with the spiral rifling like guides
- (2017) Hassan Mohammadi et al. FUEL
- Theoretical and experimental comparison of internal flow and spray characteristics between diesel and biodiesel
- (2017) Shenghao Yu et al. FUEL
- Investigation of the Effect of Cavitation in Nozzles With Different Length to Diameter Ratios on Atomization of a Liquid Jet
- (2017) Belkacem Abderrezzak et al. Journal of Thermal Science and Engineering Applications
- X-ray fluorescence measurements of dissolved gas and cavitation
- (2016) Daniel J. Duke et al. EXPERIMENTS IN FLUIDS
- Study of the effect of nozzle hole shape on internal flow and spray characteristics
- (2016) Zhixia He et al. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
- Performance of biodiesel/higher alcohols blends in a diesel engine
- (2016) Nadir Yilmaz et al. INTERNATIONAL JOURNAL OF ENERGY RESEARCH
- Progress in high performance, low emissions, and exergy recovery in internal combustion engines
- (2016) Plamen Punov et al. INTERNATIONAL JOURNAL OF ENERGY RESEARCH
- Comparison of microsac and VCO diesel injector nozzles in terms of internal nozzle flow characteristics
- (2015) F.J. Salvador et al. ENERGY CONVERSION AND MANAGEMENT
- Numerical investigation on effects of nozzle’s geometric parameters on the flow and the cavitation characteristics within injector’s nozzle for a high-pressure common-rail DI diesel engine
- (2015) Zuo-Yu Sun et al. ENERGY CONVERSION AND MANAGEMENT
- Analysis of the combined effect of hydrogrinding process and inclination angle on hydraulic performance of diesel injection nozzles
- (2015) F.J. Salvador et al. ENERGY CONVERSION AND MANAGEMENT
- Effect of the number and position of nozzle holes on in- and near-nozzle dynamic characteristics of diesel injection
- (2015) Seoksu Moon et al. FUEL
- Experimental and numerical study of cavitation inception phenomenon in diesel injector nozzles
- (2015) Zhixia He et al. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
- Transient heating effects in high pressure Diesel injector nozzles
- (2015) George Strotos et al. INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW
- A computational investigation on the influence of the use of elliptical orifices on the inner nozzle flow and cavitation development in diesel injector nozzles
- (2014) S. Molina et al. ENERGY CONVERSION AND MANAGEMENT
- Theoretical and experimental investigation of diesel engine with steam injection system on performance and emission parameters
- (2013) Görkem Kökkülünk et al. APPLIED THERMAL ENGINEERING
- Influence of injector hole number on the performance and emissions of a DI diesel engine fueled with biodiesel–diesel fuel blends
- (2013) Cenk Sayin et al. APPLIED THERMAL ENGINEERING
- Instantaneous and ensemble average cavitation structures in Diesel micro-channel flow orifices
- (2013) Nicholas Mitroglou et al. FUEL
- Effect of nozzle geometrical and dynamic factors on cavitating and turbulent flow in a diesel multi-hole injector nozzle
- (2013) Zhixia He et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- Grid-Convergent Spray Models for Internal Combustion Engine Computational Fluid Dynamics Simulations
- (2013) P. K. Senecal et al. JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME
- EFFECT OF INTERNAL FLOW STRUCTURE IN CIRCULAR AND ELLIPTICAL NOZZLES ON SPRAY CHARACTERISTICS
- (2012) Kun Woo Ku et al. ATOMIZATION AND SPRAYS
- EFFECT OF NOZZLE HOLE GEOMETRY ON NON-EVAPORATING DIESEL SPRAY CHARACTERISTICS AT HIGH-PRESSURE INJECTION
- (2012) Jangsik Kong et al. ATOMIZATION AND SPRAYS
- Comparative evaluations of injection and spray characteristics of a diesel engine using karanja biodiesel-diesel blends
- (2011) K. A. Subramanian et al. INTERNATIONAL JOURNAL OF ENERGY RESEARCH
- Effects of primary breakup modeling on spray and combustion characteristics of compression ignition engines
- (2010) S. Som et al. COMBUSTION AND FLAME
- Effect of nozzle orifice geometry on spray, combustion, and emission characteristics under diesel engine conditions
- (2010) Sibendu Som et al. FUEL
- Three-dimensional multiphase flow model to study channel flow dynamics of PEM fuel cells
- (2010) Amirreza Golpaygan et al. INTERNATIONAL JOURNAL OF ENERGY RESEARCH
- Investigation of Nozzle Flow and Cavitation Characteristics in a Diesel Injector
- (2010) S. Som et al. JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME
- Experimental Study on Effects of Nozzle Hole Geometry on Achieving Low Diesel Engine Emissions
- (2009) Prashanth K. Karra et al. JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME
- Effects of nozzle geometry on direct injection diesel engine combustion process
- (2008) R. Payri et al. APPLIED THERMAL ENGINEERING
- Spray properties of alternative fuels: A comparative analysis of biodiesel and diesel
- (2008) Chao He et al. INTERNATIONAL JOURNAL OF ENERGY RESEARCH
- Effect of cavitation in nozzle orifice on the diesel fuel atomization characteristics
- (2008) Hyun Kyu Suh et al. INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW
- Diesel nozzle geometry influence on spray liquid-phase fuel penetration in evaporative conditions
- (2007) R. Payri et al. FUEL
Create your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create NowBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started