β-Ti Alloys for Orthopedic and Dental Applications: A Review of Progress on Improvement of Properties through Surface Modification

Application of ultrasonic nanocrystal surface modification (UNSM) technique for surface strengthening of titanium and titanium alloys: a mini review

(2021) Ruyi Liu et al.   Journal of Materials Research and Technology-JMR&T

Liquid metals dealloying as a general approach for the selective extraction of metals and the fabrication of nanoporous metals: A review

(2021) Xueyi Guo et al.   Materials Today Communications

A Brief Review on the Evolution of Metallic Dental Implants: History, Design, and Application

(2021) Sumanth Ratna Kandavalli et al.   Frontiers in Materials

Impact of scandium on mechanical properties, corrosion behavior, friction and wear performance, and cytotoxicity of a β-type Ti–24Nb–38Zr–2Mo alloy for orthopedic applications

(2021) Xian Tong et al.   Acta Biomaterialia

Increased tissue-level storage modulus and hardness with age in male cortical bone and its association with decreased fracture toughness

(2021) Robert C. Singleton et al.   BONE

A novel biomedical titanium alloy with high antibacterial property and low elastic modulus

(2021) Diangeng Cai et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Development of a low elastic modulus and antibacterial Ti-13Nb-13Zr-5Cu titanium alloy by microstructure controlling

(2021) Anqi Shi et al.   Materials Science & Engineering C-Materials for Biological Applications

Surface pre-treatments of Ti-Nb-Zr-Ta beta titanium alloy: The effect of chemical, electrochemical and ion sputter etching on morphology, residual stress, corrosion stability and the MG-63 cell response

(2021) Petr Vlcak et al.   Results in Physics

Effect of alloying elements on laser surface modification of powder metallurgy to improve surface mechanical properties of beta titanium alloys for biomedical application

(2021) M.C. Rossi et al.   Journal of Materials Research and Technology-JMR&T

Differences in the effect of surface texturing on the wear loss of β-type Ti–Nb–Ta–Zr and (α+β)-type Ti–6Al–4V ELI alloys in contact with zirconia in physiological saline solution

(2021) Masaaki Nakai et al.   Journal of the Mechanical Behavior of Biomedical Materials

Microstructure refinement and enhanced wear-resistance modulated by stress relaxation processing in a metastable β titanium alloy

(2021) Ke Hua et al.   MATERIALS CHARACTERIZATION

Microstructure and wear behavior of inductive nitriding layer in Ti–25Nb–3Zr–2Sn–3Mo alloys

(2021) Xueting Jiang et al.   SURFACE & COATINGS TECHNOLOGY

On the mechanism of crater wear in a high strength metastable β titanium alloy

(2021) Alex Graves et al.   WEAR

3D printing of a titanium-tantalum Gyroid scaffold with superb elastic admissible strain, bioactivity and in-situ bone regeneration capability

(2021) Danlei Zhao et al.   Additive Manufacturing

Nanostructured Titanium Alloys Surface Modification Technology for Antibacterial and Osteogenic Properties

(2020) Qingge Wang et al.   Current Nanoscience

Comprehensive review on alloy design, processing, and performance of β Titanium alloys as biomedical materials

(2020) Sumit Bahl et al.   INTERNATIONAL MATERIALS REVIEWS

Design of β-Titanium microstructures for implant materials

(2020) Şafak Çallıoğlu et al.   Materials Science & Engineering C-Materials for Biological Applications

Superelastic behavior of in-situ eutectic-reaction manufactured high strength 3D porous NiTi-Nb scaffold

(2020) Shifeng Liu et al.   SCRIPTA MATERIALIA

Review of the Design of Titanium Alloys with Low Elastic Modulus as Implant Materials

(2020) Shunxing Liang   ADVANCED ENGINEERING MATERIALS

Laser surface treatment of α-β titanium alloy to develop a β -rich phase with very high hardness

(2020) Alok Singh Chauhan et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Rough surface of copper-bearing titanium alloy with multifunctions of osteogenic ability and antibacterial activity

(2020) Hui Liu et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Radiographic Risk Factors Associated With Adverse Local Tissue Reaction in Head-Neck Taper Corrosion of Primary Metal-on-Polyethylene Total Hip Arthroplasty

(2020) Young-Min Kwon et al.   JOURNAL OF THE AMERICAN ACADEMY OF ORTHOPAEDIC SURGEONS

Microstructure evolution and wear behavior of titanium alloy under cryogenic dry sliding wear condition

(2020) Zeju Weng et al.   MATERIALS CHARACTERIZATION

Bulk and surface design of MAO-treated Ti-15Zr-15Mo-Ag alloys for potential use as biofunctional implants

(2020) J.E. Torrento et al.   MATERIALS LETTERS

Multi-Scale Surface Treatments of Titanium Implants for Rapid Osseointegration: A Review

(2020) Qingge Wang et al.   Nanomaterials

Surface Functionalization of Biomedical Ti-6Al-7Nb Alloy by Liquid Metal Dealloying

(2020) Ilya Vladimirovich Okulov et al.   Nanomaterials

Superelastic response of low-modulus porous beta-type Ti-35Nb-2Ta-3Zr alloy fabricated by laser powder bed fusion

(2020) Noman Hafeez et al.   Additive Manufacturing

The Toxicity Phenomenon and the Related Occurrence in Metal and Metal Oxide Nanoparticles: A Brief Review From the Biomedical Perspective

(2020) Shokouh Attarilar et al.   Frontiers in Bioengineering and Biotechnology

A low-cost metastable beta Ti alloy with high elastic admissible strain and enhanced ductility for orthopaedic application

(2020) Yidong Xu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Optimization of anti-wear and anti-bacterial properties of beta TiNb alloy via controlling duty cycle in open-air laser nitriding

(2020) Xianwen Chang et al.   Journal of the Mechanical Behavior of Biomedical Materials

A Review on alloy design, biological response, and strengthening of β-Titanium Alloys as biomaterials

(2020) Sarabjeet Singh Sidhu et al.   Materials Science & Engineering C-Materials for Biological Applications

Compressive properties and microstructure evolution in NiTiNb alloy with mesh eutectic phase

(2020) Shifeng Liu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

3D-printed porous titanium scaffolds incorporating niobium for high bone regeneration capacity

(2020) Hang Liang et al.   MATERIALS & DESIGN

Tensile and superelastic behaviors of Ti-35Nb-2Ta-3Zr with gradient structure

(2020) Liqiang Wang et al.   MATERIALS & DESIGN

Comparative analysis of corrosion resistance between beta titanium and Ti-6Al-4V alloys: A systematic review

(2020) Juliana Dias Corpa Tardelli et al.   JOURNAL OF TRACE ELEMENTS IN MEDICINE AND BIOLOGY

Improvement of surface properties and corrosion resistance of Ti13Nb13Zr titanium alloy by plasma-sprayed HA/ZnO coatings for biomedical applications

(2020) Puneet Bansal et al.   MATERIALS CHEMISTRY AND PHYSICS

Anomalous compliance of interpenetrating-phase composite of Ti and Mg synthesized by liquid metal dealloying

(2020) Ilya Vladimirovich Okulov et al.   SCRIPTA MATERIALIA

Antibacterial surface design of biomedical titanium materials for orthopedic applications

(2020) Zhang Yuan et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

A Review on Biomedical Titanium Alloys: Recent Progress and Prospect

(2019) Lai‐Chang Zhang et al.   ADVANCED ENGINEERING MATERIALS

Enhancing corrosion resistance and biocompatibility of interconnected porous β-type Ti-24Nb-4Zr-8Sn alloy scaffold through alkaline treatment and type I collagen immobilization

(2019) Chia-Fei Liu et al.   APPLIED SURFACE SCIENCE

The rapidly solidified β-type Ti–Fe–Sn alloys with high specific strength and low elastic modulus

(2019) Peiyou Li et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure evolution and electrochemical properties of TiO2/Ti-35Nb-2Ta-3Zr micro/nano-composites fabricated by friction stir processing

(2019) Hao Gu et al.   MATERIALS & DESIGN

Mechanical characterization and deformation behavior of β-stabilized Ti-Nb-Sn-Cr alloys

(2019) S.F. Jawed et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure and tribocorrosion performance of nanocrystalline TiN graded coating on biomedical titanium alloy

(2019) Wen-fang CUI et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Review on titanium and titanium based alloys as biomaterials for orthopaedic applications

(2019) Manmeet Kaur et al.   Materials Science & Engineering C-Materials for Biological Applications

Effect of laser remelting on microstructural evolution and mechanical properties of Ti-35Nb-2Ta-3Zr alloy

(2019) Ting Zhang et al.   MATERIALS LETTERS

Modulation of the mechanosensing of mesenchymal stem cells by laser-induced patterning for the acceleration of tissue reconstruction through the Wnt/β-catenin signaling pathway activation

(2019) Jieni Fu et al.   Acta Biomaterialia

Surface Modification of Titanium and Titanium Alloys: Technologies, Developments, and Future Interests

(2019) Lai-Chang Zhang et al.   ADVANCED ENGINEERING MATERIALS

Microstructural and mechanical properties of β-type Ti–Mo–Nb biomedical alloys with low elastic modulus

(2019) Peiyou Li et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Fabrication of high strength, antibacterial and biocompatible Ti-5Mo-5Ag alloy for medical and surgical implant applications

(2019) Yiwen Zhang et al.   Materials Science & Engineering C-Materials for Biological Applications

Creating an antibacterial surface on beta TNZT alloys for hip implant applications by laser nitriding

(2019) Clare Lubov Donaghy et al.   OPTICS AND LASER TECHNOLOGY

Microstructures, mechanical, and biological properties of a novel Ti-6V-4V/zinc surface nanocomposite prepared by friction stir processing

(2018) Chenyuan Zhu et al.   International Journal of Nanomedicine

Significant improvement in cell adhesion and wear resistance of biomedical β-type titanium alloy through ultrasonic nanocrystal surface modification

(2018) Mehdi Kheradmandfard et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Engineering the next-generation tin containing β titanium alloys with high strength and low modulus for orthopedic applications

(2018) Sumit Bahl et al.   Journal of the Mechanical Behavior of Biomedical Materials

Open porous dealloying-based biomaterials as a novel biomaterial platform

(2018) I.V. Okulov et al.   Materials Science & Engineering C-Materials for Biological Applications

Tuning microstructure and mechanical properties of open porous TiNb and TiFe alloys by optimization of dealloying parameters

(2018) I.V. Okulov et al.   SCRIPTA MATERIALIA

Dealloying-based metal-polymer composites for biomedical applications

(2018) A.V. Okulov et al.   SCRIPTA MATERIALIA

Characterization of plasma electrolytic oxidation film on biomedical high niobium-containing β‑titanium alloy

(2018) Lin Chen et al.   SURFACE & COATINGS TECHNOLOGY

The influence of alloy elements in Ti 6Al 4V and Ti 35Nb 2Ta 3Zr on the structure, morphology and properties of MAO coatings

(2018) Chaohu Wang et al.   VACUUM

Laser cladding Ti-Ni/TiN/TiW+TiS/WS2 self-lubricating wear resistant composite coating on Ti-6Al-4V alloy

(2018) Qiushi Gao et al.   OPTICS AND LASER TECHNOLOGY

Aluminium in brain tissue in familial Alzheimer’s disease

(2017) Ambreen Mirza et al.   JOURNAL OF TRACE ELEMENTS IN MEDICINE AND BIOLOGY

Surface modification of β-phase Ti implant by hydroaxyapatite mixed electric discharge machining to enhance the corrosion resistance and in-vitro bioactivity

(2017) Chander Prakash et al.   SURFACE & COATINGS TECHNOLOGY

Nanostructured β-type titanium alloy fabricated by ultrasonic nanocrystal surface modification

(2017) Mehdi Kheradmandfard et al.   ULTRASONICS SONOCHEMISTRY

Dealloying-based interpenetrating-phase nanocomposites matching the elastic behavior of human bone

(2017) I. V. Okulov et al.   Scientific Reports

Microstructure, defects and mechanical behavior of beta-type titanium porous structures manufactured by electron beam melting and selective laser melting

(2016) Y.J. Liu et al.   ACTA MATERIALIA

Modified surface morphology of a novel Ti–24Nb–4Zr–7.9Sn titanium alloy via anodic oxidation for enhanced interfacial biocompatibility and osseointegration

(2016) Xiang Li et al.   COLLOIDS AND SURFACES B-BIOINTERFACES

Electron Beam Melted Beta-type Ti–24Nb–4Zr–8Sn Porous Structures With High Strength-to-Modulus Ratio

(2016) Yujing Liu et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Influence of polyetheretherketone coatings on the Ti–13Nb–13Zr titanium alloy's bio-tribological properties and corrosion resistance

(2016) Anita Sak et al.   Materials Science & Engineering C-Materials for Biological Applications

Dry sliding wear behavior of superelastic Ti–10V–2Fe–3Al β-titanium alloy

(2016) M. Mehdi et al.   WEAR

Compatibility assessment of new V-free low-cost Ti–4.7Mo–4.5Fe alloy for some biomedical applications

(2016) Yasser Abd-elrhman et al.   MATERIALS & DESIGN

Wear transition of solid-solution-strengthened Ti–29Nb–13Ta–4.6Zr alloys by interstitial oxygen for biomedical applications

(2015) Yoon-Seok Lee et al.   Journal of the Mechanical Behavior of Biomedical Materials

Tribocorrosion behavior of beta titanium biomedical alloys in phosphate buffer saline solution

(2015) V. Guiñón Pina et al.   Journal of the Mechanical Behavior of Biomedical Materials

Investigation of Deformation Mechanisms in β-Type Ti-35Nb-2Ta-3Zr Alloy via FSP Leading to Surface Strengthening

(2015) Liqiang Wang et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Effects of sliding velocity on tribo-oxides and wear behavior of Ti–6Al–4V alloy

(2015) X.X. Li et al.   TRIBOLOGY INTERNATIONAL

Investigation of the factors influencing the tensile behaviour of PM Ti–3Al–2.5V alloy

(2014) L. Bolzoni et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Laser surface alloying of commercially pure titanium with boron and carbon

(2014) N. Makuch et al.   OPTICS AND LASERS IN ENGINEERING

Effects of surface nanocrystallization on corrosion resistance of β-type titanium alloy

(2014) Lei JIN et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Production, characterisation, and cytocompatibility of porous titanium-based particulate scaffolds

(2013) B. J. C. Luthringer et al.   JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE

Nanocrystalline β-Ti alloy with high hardness, low Young's modulus and excellent in vitro biocompatibility for biomedical applications

(2013) Kelvin Y. Xie et al.   Materials Science & Engineering C-Materials for Biological Applications

Microstructure evolution and mechanical properties of a Ti–35Nb–3Zr–2Ta biomedical alloy processed by equal channel angular pressing (ECAP)

(2013) Zhengjie Lin et al.   Materials Science & Engineering C-Materials for Biological Applications

Development of new metallic alloys for biomedical applications

(2012) Mitsuo Niinomi et al.   Acta Biomaterialia

Peripheral neuropathy after hip replacement failure: is vanadium the culprit?

(2012) Biagio Moretti et al.   LANCET

Dry sliding wear behavior of laser clad TiVCrAlSi high entropy alloy coatings on Ti–6Al–4V substrate

(2012) Can Huang et al.   MATERIALS & DESIGN

On the role of Nb-related sites of an oxidized β-TiNb alloy surface in its interaction with osteoblast-like MG-63 cells

(2012) Ivan Jirka et al.   Materials Science & Engineering C-Materials for Biological Applications

Diffusion bonding of Ti–2.5Al–2.5Mo–2.5Zr and Co–Cr–Mo alloys

(2011) Guo He et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Influence of forging deformation and heat treatment on microstructure of Ti–xNb–3Zr–2Ta alloys

(2011) Yongfeng Zhu et al.   Materials Science & Engineering C-Materials for Biological Applications

Fretting-corrosion behavior of β titanium alloys in simulated synovial fluid

(2011) N. Diomidis et al.   WEAR

Wear properties of Ti–13Zr–13Nb (wt.%) near β titanium alloy containing 0.5wt.% boron in dry condition, Hank's solution and bovine serum

(2010) P. Majumdar et al.   Materials Science & Engineering C-Materials for Biological Applications

Ti based biomaterials, the ultimate choice for orthopaedic implants – A review

(2008) M. Geetha et al.   PROGRESS IN MATERIALS SCIENCE