Particulate-reinforced iron-based metal matrix composites fabricated by selective laser melting: A systematic review
Published 2022 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Particulate-reinforced iron-based metal matrix composites fabricated by selective laser melting: A systematic review
Authors
Keywords
Selective laser melting, Metal matrix composites, Microstructures, Properties, Mechanisms
Journal
Journal of Manufacturing Processes
Volume 74, Issue -, Pages 592-639
Publisher
Elsevier BV
Online
2022-01-06
DOI
10.1016/j.jmapro.2021.12.018
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Role of laser scan strategies in defect control, microstructural evolution and mechanical properties of steel matrix composites prepared by laser additive manufacturing
- (2021) Hong-yu Chen et al. International Journal of Minerals Metallurgy and Materials
- Manufacturing Fe–TiC metal matrix composite by Electron Beam Powder Bed Fusion from pre-alloyed gas atomized powder
- (2021) Anton Perminov et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Selective Laser Melting of 316L Stainless Steel: Influence of Co-Cr-Mo-W Addition on Corrosion Resistance
- (2021) Bolin Li et al. Metals
- Process parameter optimization for selective laser melting of Inconel 718 superalloy and the effects of subsequent heat treatment on the microstructural evolution and mechanical properties
- (2021) Wenquan Wang et al. Journal of Manufacturing Processes
- Pulsed-mode Selective Laser Melting of 17-4 PH stainless steel: Effect of laser parameters on density and mechanical properties
- (2021) Andac Ozsoy et al. Journal of Manufacturing Processes
- Effect of tungsten particles on microstructure and properties of 316 L stainless steel manufactured by selective laser melting
- (2021) Xiaotian Yin et al. Journal of Manufacturing Processes
- Influence of substructures on the selective laser melted Ti-6Al-4V alloy as a function of laser re-melting
- (2021) J. Karimi et al. Journal of Manufacturing Processes
- Selective laser melting of silver submicron powder modified 316L stainless steel: Influence of silver addition on microstructures and performances
- (2020) Jingfeng Quan et al. POWDER TECHNOLOGY
- Phased array ultrasonic testing of micro-flaws in additive manufactured titanium block
- (2020) Xiaohui Wang et al. Materials Research Express
- Development of metal matrix composites by laser-assisted additive manufacturing technologies: a review
- (2020) Jing Shi et al. JOURNAL OF MATERIALS SCIENCE
- Effects of Y2O3 on the microstructure and wear resistance of WC/Ni composite coatings fabricated by plasma transferred arc
- (2020) Yue Hou et al. Materials Express
- In-situ optical emission spectroscopy of selective laser melting
- (2020) Cody S. Lough et al. Journal of Manufacturing Processes
- Densification, microstructure and mechanical performance of TiC/Fe composites by spark plasma sintering
- (2020) Lei Huang et al. Journal of Materials Research and Technology-JMR&T
- Characterization of nanoparticle mixed 316 L powder for additive manufacturing
- (2020) Wengang Zhai et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Effect of Y2O3 addition on the oxidation resistance of TiN/Ni composites applied for intermediate temperature solid oxide fuel cell interconnects
- (2020) Hang Duan et al. MATERIALS CHARACTERIZATION
- Effect of scanning strategies on the microstructure and mechanical behavior of 316L stainless steel fabricated by selective laser melting
- (2020) Ya'nan Song et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Fine-grain-embedded dislocation-cell structures for high strength and ductility in additively manufactured steels
- (2020) Jia Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure evolution, mechanical properties, and strengthening mechanism of TiC reinforced Inconel 625 nanocomposites fabricated by selective laser melting
- (2020) Lan Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The effect of laser scanning strategies on texture, mechanical properties, and site-specific grain orientation in selective laser melted 316L SS
- (2020) Jithin James Marattukalam et al. MATERIALS & DESIGN
- Spattering and denudation in laser powder bed fusion process: Multiphase flow modelling
- (2020) Hui Chen et al. ACTA MATERIALIA
- Selective laser melting of dispersed TiC particles strengthened 316L stainless steel
- (2020) Wengang Zhai et al. COMPOSITES PART B-ENGINEERING
- Enhanced strength-ductility synergy of selective laser melted reduced activation ferritic/martensitic steel via heterogeneous microstructure modification
- (2020) Mingguang Jiang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Densification Behavior and Influence of Building Direction on High Anisotropy in Selective Laser Melting of High-Strength 18Ni-Co-Mo-Ti Maraging Steel
- (2020) Yuchao Bai et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Compression behaviour of quasicrystal/Al composite with powder mixture driven layered microstructure prepared by selective laser melting
- (2020) J.L. Lu et al. OPTICS AND LASER TECHNOLOGY
- Microstructure and hardness response of novel 316L stainless steel composite with TiN addition fabricated by SLM
- (2020) Dhritti Tanprayoon et al. OPTICS AND LASER TECHNOLOGY
- Impact of IN718 bimodal powder size distribution on the performance and productivity of laser powder bed fusion additive manufacturing process
- (2020) Seyed Amir Farzadfar et al. POWDER TECHNOLOGY
- A review of particulate-reinforced aluminum matrix composites fabricated by selective laser melting
- (2020) Pei WANG et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- A new way to net-shaped synthesis tungsten steel by selective laser melting and hot isostatic pressing
- (2020) N. Kang et al. VACUUM
- Interfacial Stability of TiC/γ-Fe in TiC/316L Stainless Steel Composites Prepared by Selective Laser Melting: First Principles and Experiment
- (2020) Peikang Bai et al. Metals
- Numerical and experimental investigation on thermal behavior and microstructure during selective laser melting of high strength steel
- (2020) Yong Chen et al. Journal of Manufacturing Processes
- Numerical analysis of powder bed generation and single track forming for selective laser melting of SS316L stainless steel
- (2020) Yunfu Tian et al. Journal of Manufacturing Processes
- Selective laser melting of Hastelloy X nanocomposite: Effects of TiC reinforcement on crack elimination and strength improvement
- (2020) Quanquan Han et al. COMPOSITES PART B-ENGINEERING
- Deformation mechanism and enhanced properties of Cu–TiB2 composites evaluated by the in-situ tensile test and microstructure characterization
- (2020) Abdollah Bahador et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Influence of laser power and scanning strategy on residual stress distribution in additively manufactured 316L steel
- (2020) Peiying Bian et al. OPTICS AND LASER TECHNOLOGY
- Critical instability at moving keyhole tip generates porosity in laser melting
- (2020) Cang Zhao et al. SCIENCE
- A review of ultrasonic testing applications in additive manufacturing: Defect evaluation, material characterization, and process control
- (2020) F. Honarvar et al. ULTRASONICS
- Microstructural evolution and mechanical performance of in-situ TiB2/AlSi10Mg composite manufactured by selective laser melting
- (2020) Yuxuan Liu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Novel WC-reinforced iron-based composites with excellent mechanical properties synthesized by laser additive manufacturing: Underlying role of reinforcement weight fraction
- (2020) Hongyu Chen et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Selective Laser Melting to Manufacture “In Situ” Metal Matrix Composites: A Review
- (2019) Sasan Dadbakhsh et al. ADVANCED ENGINEERING MATERIALS
- Microstructure and Mechanical Properties of TiC-Reinforced 316L Stainless Steel Composites Fabricated Using Selective Laser Melting
- (2019) Zhanyong Zhao et al. Metals
- Laser Polishing of Additive Manufactured 316L Stainless Steel Synthesized by Selective Laser Melting
- (2019) Muhannad Obeidi et al. Materials
- Tribological Behavior of TiC Particles Reinforced 316Lss Composite Fabricated Using Selective Laser Melting
- (2019) Jing Li et al. Materials
- Additive manufacturing of ultrafine-grained austenitic stainless steel matrix composite via vanadium carbide reinforcement addition and selective laser melting: Formation mechanism and strengthening effect
- (2019) Bo Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Ionic Liquid-Assisted Preparation of Ni-Cr Dual Wrapped ZTA Particles for Reinforced Iron-Based Composites
- (2019) Juanjian Ru et al. ADVANCED ENGINEERING MATERIALS
- Easy-To-Remove Composite Support Material and Procedure in Additive Manufacturing of Metallic Components Using Multiple Material Laser-Based Powder Bed Fusion
- (2019) Chao Wei et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Influence of TiN nanoparticle addition on microstructure and properties of Fe22Cr alloy fabricated by spark plasma sintering
- (2019) Samuel Ranti Oke et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Densification and grain boundary nitrides in spark plasma sintered SAF 2205 -TiN composite
- (2019) Samuel Ranti Oke et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Spatter transport by inert gas flow in selective laser melting: A simulation study
- (2019) Ahmad Bin Anwar et al. POWDER TECHNOLOGY
- Particle-reinforced metal matrix nanocomposites fabricated by selective laser melting: A state of the art review
- (2019) W.H. Yu et al. PROGRESS IN MATERIALS SCIENCE
- 3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting
- (2019) Nesma T. Aboulkhair et al. PROGRESS IN MATERIALS SCIENCE
- Strong and ductile reduced activation ferritic/martensitic steel additively manufactured by selective laser melting
- (2019) M. G. Jiang et al. Materials Research Letters
- Rapid fabrication of TiN/AISI 420 stainless steel composite by selective laser melting additive manufacturing
- (2019) X. Zhao et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of energy density and scanning strategy on densification, microstructure and mechanical properties of 316L stainless steel processed via selective laser melting
- (2019) Taban Larimian et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Selective laser melting of AISI 304 stainless steel composites reinforced by Al2O3 and eutectic mixture of Al2O3–ZrO2 powders
- (2019) Daniyal Abolhasani et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Physical and chemical phenomena occurring between solid ceramics and liquid metals and alloys at laser and plasma composite coatings formation: A review
- (2019) Soufiane Oukach et al. SURFACE SCIENCE REPORTS
- Analysis of Melt-Pool Behaviors during Selective Laser Melting of AISI 304 Stainless-Steel Composites
- (2019) Abolhasani et al. Metals
- Impact of the scanning strategy on the mechanical behavior of 316L steel synthesized by selective laser melting
- (2019) O.O. Salman et al. Journal of Manufacturing Processes
- The influence of building direction on the fatigue crack propagation behavior of Ti6Al4V alloy produced by selective laser melting
- (2019) Z.W. Xu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Steels in additive manufacturing: A review of their microstructure and properties
- (2019) P. Bajaj et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of scanning strategy on microstructure and mechanical properties of selective laser melted reduced activation ferritic/martensitic steel
- (2019) C.Y. Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Enhanced corrosion behavior of selective laser melting S136 mould steel reinforced with nano-TiB2
- (2019) Hui Hu et al. OPTICS AND LASER TECHNOLOGY
- Laser absorption behavior of randomly packed powder-bed during selective laser melting of SiC and TiB2 reinforced Al matrix composites
- (2019) Dongdong Gu et al. OPTICS AND LASER TECHNOLOGY
- Densification behavior, microstructural evolution, and mechanical properties of TiC/AISI420 stainless steel composites fabricated by selective laser melting
- (2019) Yunfei Liu et al. MATERIALS & DESIGN
- Revealing the fatigue crack initiation mechanism of a TiB2-reinforced steel matrix composite
- (2019) Ronghua Chen et al. INTERNATIONAL JOURNAL OF FATIGUE
- Selective laser melting of TiC reinforced stainless steel nanocomposites: Mechanical behaviour at elevated temperatures
- (2019) Dariusz Grzesiak et al. MATERIALS LETTERS
- Mechanical properties of Invar 36 alloy additively manufactured by selective laser melting
- (2019) Kai Wei et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- High strength (~2000 MPa) or highly ductile (~11%) additively manufactured H13 by tempering at different conditions
- (2019) Jujie Yan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Formation of Austenite in Additively Manufactured and Post-Processed Duplex Stainless Steel Alloys
- (2019) A. D. Iams et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Layerwise fabrication of refractory NiCrSiB composite with gradient grow of tungsten carbide additives by selective laser melting
- (2019) Igor Shishkovsky et al. OPTICS AND LASER TECHNOLOGY
- Preheat effect on titanium plate fabricated by sputter-free selective laser melting in vacuum
- (2018) Yuji Sato et al. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
- Enhanced hardness and wear property of S136 mould steel with nano-TiB 2 composites fabricated by selective laser melting method
- (2018) Shifeng Wen et al. APPLIED SURFACE SCIENCE
- Preparation of nickel coating on ZTA particles by electroless plating
- (2018) Lei Fan et al. CERAMICS INTERNATIONAL
- Experimental investigation of melt pool behaviour during selective laser melting by high speed imaging
- (2018) Tatsuaki Furumoto et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Laser additive manufactured WC reinforced Fe-based composites with gradient reinforcement/matrix interface and enhanced performance
- (2018) Dongdong Gu et al. COMPOSITE STRUCTURES
- Online quality inspection using Bayesian classification in powder-bed additive manufacturing from high-resolution visual camera images
- (2018) Masoumeh Aminzadeh et al. JOURNAL OF INTELLIGENT MANUFACTURING
- Thermal behavior of the molten pool, microstructural evolution, and tribological performance during selective laser melting of TiC/316L stainless steel nanocomposites: Experimental and simulation methods
- (2018) Bandar AlMangour et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- The Role of Microstructure and Surface Finish on the Corrosion of Selective Laser Melted 304L
- (2018) Rebecca F. Schaller et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Influence of sintering process parameters on corrosion and wear behaviour of SAF 2205 reinforced with nano-sized TiN
- (2018) Samuel Ranti Oke et al. MATERIALS CHEMISTRY AND PHYSICS
- Strengthening of stainless steel by titanium carbide addition and grain refinement during selective laser melting
- (2018) Bandar AlMangour et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Phase evolution and wear resistance of in situ synthesized V 8 C 7 particles reinforced Fe-based coating by laser cladding
- (2018) C. Wang et al. OPTICS AND LASER TECHNOLOGY
- Densification behavior and mechanical properties of nanocrystalline TiC reinforced 316L stainless steel composite parts fabricated by selective laser melting
- (2018) Shuming Zhao et al. OPTICS AND LASER TECHNOLOGY
- In situ formation of TiC-particle-reinforced stainless steel matrix nanocomposites during ball milling: Feedstock powder preparation for selective laser melting at various energy densities
- (2018) Bandar AlMangour et al. POWDER TECHNOLOGY
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- Ultrastrong nanocrystalline stainless steel and its Hall-Petch relationship in the nanoscale
- (2018) Fei Yin et al. SCRIPTA MATERIALIA
- Additive manufacturing of WC reinforced maraging steel 300 composites by cold spraying and selective laser melting
- (2018) Xingchen Yan et al. SURFACE & COATINGS TECHNOLOGY
- Microstructure and wear properties of selective laser melted WC reinforced 18Ni-300 steel matrix composite
- (2018) Nan Kang et al. VACUUM
- Densification behavior, microstructural evolution, and mechanical properties of TiC/316L stainless steel nanocomposites fabricated by selective laser melting
- (2018) Bandar AlMangour et al. MATERIALS & DESIGN
- Carbon nanotubes as a unique agent to fabricate nanoceramic/metal composite powders for additive manufacturing
- (2018) Weiwei Zhou et al. MATERIALS & DESIGN
- H13–partially stabilized zirconia nanocomposites fabricated by high-energy mechanical milling and selective laser melting
- (2018) Faraz Deirmina et al. MATERIALS & DESIGN
- Selective laser melting of stainless steel and alumina composite: Experimental and simulation studies on processing parameters, microstructure and mechanical properties
- (2018) Xinwei Li et al. MATERIALS & DESIGN
- A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties
- (2018) Haniyeh Fayazfar et al. MATERIALS & DESIGN
- Fatigue properties and material characteristics of additively manufactured AlSi10Mg – Effect of the contour parameter on the microstructure, density, residual stress, roughness and mechanical properties
- (2018) Emilie Beevers et al. INTERNATIONAL JOURNAL OF FATIGUE
- Microstructure and properties of ZrO2-reinforced 24CrNiMoY alloy steel prepared by selective laser melting
- (2018) Qing Xia et al. POWDER METALLURGY
- Novel TiB2-reinforced 316L stainless steel nanocomposites with excellent room- and high-temperature yield strength developed by additive manufacturing
- (2018) Bandar AlMangour et al. COMPOSITES PART B-ENGINEERING
- Selective laser melting of WC reinforced maraging steel 300: Microstructure characterization and tribological performance
- (2018) Xingchen Yan et al. SURFACE & COATINGS TECHNOLOGY
- Effect of Hatch Spacing on Melt Pool and As-built Quality During Selective Laser Melting of Stainless Steel: Modeling and Experimental Approaches
- (2018) Zhichao Dong et al. Materials
- Effects of Platform Pre-Heating and Thermal-Treatment Strategies on Properties of AlSi10Mg Alloy Processed by Selective Laser Melting
- (2018) Riccardo Casati et al. Metals
- Influence of nanoparticle size distribution on the thermal conductivity of particulate nanocomposites
- (2017) Cong-Liang Huang et al. EPL
- The selection of process parameters in additive manufacturing for aerospace alloys
- (2017) Mostafa Yakout et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Numerical and experimental evaluation of a conformally cooled H13 steel injection mould manufactured with selective laser melting
- (2017) Maciej Mazur et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Oxides, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting
- (2017) Ming Tang et al. INTERNATIONAL JOURNAL OF FATIGUE
- Improving the mechanical properties of tantalum carbide particle-reinforced iron-based composite by varying the TaC contents
- (2017) Jianhong Peng et al. JOURNAL OF ALLOYS AND COMPOUNDS
- In-situ formation of novel TiC-particle-reinforced 316L stainless steel bulk-form composites by selective laser melting
- (2017) Bandar AlMangour et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Scanning strategies for texture and anisotropy tailoring during selective laser melting of TiC/316L stainless steel nanocomposites
- (2017) Bandar AlMangour et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Formation of metastable cellular microstructures in selective laser melted alloys
- (2017) K.G. Prashanth et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Selective laser melting of TiB 2 /H13 steel nanocomposites: Influence of hot isostatic pressing post-treatment
- (2017) Bandar AlMangour et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Integral method of preparation and fabrication of metal matrix composite: Selective laser melting of in-situ nano/submicro-sized carbides reinforced iron matrix composites
- (2017) Bo Song et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- 3D printing of high-strength aluminium alloys
- (2017) John H. Martin et al. NATURE
- Selective laser melting of TiB2/316L stainless steel composites: The roles of powder preparation and hot isostatic pressing post-treatment
- (2017) Bandar AlMangour et al. POWDER TECHNOLOGY
- Crystallographic texture control of beta-type Ti–15Mo–5Zr–3Al alloy by selective laser melting for the development of novel implants with a biocompatible low Young's modulus
- (2017) Takuya Ishimoto et al. SCRIPTA MATERIALIA
- Selective laser melting of TiC/H13 steel bulk-form nanocomposites with variations in processing parameters
- (2017) Bandar AlMangour et al. MRS Communications
- Novel Composite Powders with Uniform TiB2 Nano-Particle Distribution for 3D Printing
- (2017) Mengxing Chen et al. Applied Sciences-Basel
- Mechanisms and characteristics of spatter generation in SLM processing and its effect on the properties
- (2017) Di Wang et al. MATERIALS & DESIGN
- Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties
- (2017) Florian Hengsbach et al. MATERIALS & DESIGN
- 316L stainless steel designed to withstand intermediate temperature
- (2017) K. Saeidi et al. MATERIALS & DESIGN
- Microstructural correlated damage mechanisms of the high-cycle fatigued in-situ TiB 2 /Al-Cu-Mg composite
- (2017) Jiwei Geng et al. MATERIALS & DESIGN
- On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting
- (2017) Umberto Scipioni Bertoli et al. MATERIALS & DESIGN
- Metallurgy of high-silicon steel parts produced using Selective Laser Melting
- (2016) Michele Garibaldi et al. ACTA MATERIALIA
- Denudation of metal powder layers in laser powder bed fusion processes
- (2016) Manyalibo J. Matthews et al. ACTA MATERIALIA
- Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing
- (2016) Zhuqing Wang et al. ACTA MATERIALIA
- Origin of grain orientation during solidification of an aluminum alloy
- (2016) H.L. Wei et al. ACTA MATERIALIA
- Microstructural Control of Additively Manufactured Metallic Materials
- (2016) P.C. Collins et al. Annual Review of Materials Research
- Influence of hatch spacing on heat and mass transfer, thermodynamics and laser processability during additive manufacturing of Inconel 718 alloy
- (2016) Mujian Xia et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Rapid fabrication of bulk-form TiB 2 /316L stainless steel nanocomposites with novel reinforcement architecture and improved performance by selective laser melting
- (2016) Bandar AlMangour et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Novel ferritic stainless steel formed by laser melting from duplex stainless steel powder with advanced mechanical properties and high ductility
- (2016) K. Saeidi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Grain structure evolution in Inconel 718 during selective electron beam melting
- (2016) H. Helmer et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural characteristics of the nickel-based alloy IN738LC and the cobalt-based alloy Mar-M509 produced by selective laser melting
- (2016) Michael Cloots et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- X-ray computed tomography for additive manufacturing: a review
- (2016) A Thompson et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Powder Bed Layer Characteristics: The Overseen First-Order Process Input
- (2016) H. W. Mindt et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Laser additive manufacturing of bulk and porous shape-memory NiTi alloys: From processes to potential biomedical applications
- (2016) Sasan Dadbakhsh et al. MRS BULLETIN
- Crack initiation and propagation behavior of WC particles reinforced Fe-based metal matrix composite produced by laser melting deposition
- (2016) Jiandong Wang et al. OPTICS AND LASER TECHNOLOGY
- Microhardness and microstructure evolution of TiB2 reinforced Inconel 625/TiB2 composite produced by selective laser melting
- (2016) Baicheng Zhang et al. OPTICS AND LASER TECHNOLOGY
- The achievable mechanical properties of SLM produced Maraging Steel 300 components
- (2016) Thorsten Hermann Becker et al. RAPID PROTOTYPING JOURNAL
- Formation mechanism and microstructural and mechanical properties of in-situ Ti–Ni-based composite coatings by laser metal deposition
- (2016) Chenglong Ma et al. SURFACE & COATINGS TECHNOLOGY
- Nanocrystalline TiC-reinforced H13 steel matrix nanocomposites fabricated by selective laser melting
- (2016) Bandar AlMangour et al. MATERIALS & DESIGN
- Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting
- (2016) Galina Kasperovich et al. MATERIALS & DESIGN
- Selective laser melting of TiC reinforced 316L stainless steel matrix nanocomposites: Influence of starting TiC particle size and volume content
- (2016) Bandar AlMangour et al. MATERIALS & DESIGN
- On the role of melt flow into the surface structure and porosity development during selective laser melting
- (2015) Chunlei Qiu et al. ACTA MATERIALIA
- Calculation of laser absorption by metal powders in additive manufacturing
- (2015) C. D. Boley et al. APPLIED OPTICS
- Microstructure evolution and mechanical properties in ultrafine grained Al/TiC composite fabricated by accumulative roll bonding
- (2015) Hamidreza Jafarian et al. COMPOSITES PART B-ENGINEERING
- Evaluation of analytical modeling for improvement of surface roughness of FDM test part using measurement results
- (2015) Sadegh Rahmati et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Textures formed in a CoCrMo alloy by selective laser melting
- (2015) Xin Zhou et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Fabrication of large Ti–6Al–4V structures by direct laser deposition
- (2015) Chunlei Qiu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Electrical and thermal properties of SiC–AlN ceramics without sintering additives
- (2015) Kwang Joo Kim et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Texture, anisotropy in microstructure and mechanical properties of IN738LC alloy processed by selective laser melting (SLM)
- (2015) Karsten Kunze et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Rapid fabrication of Al-based bulk-form nanocomposites with novel reinforcement and enhanced performance by selective laser melting
- (2015) Dongdong Gu et al. SCRIPTA MATERIALIA
- Selective laser melting of in-situ Al4SiC4 + SiC hybrid reinforced Al matrix composites: Influence of starting SiC particle size
- (2015) Fei Chang et al. SURFACE & COATINGS TECHNOLOGY
- Particulate migration behavior and its mechanism during selective laser melting of TiC reinforced Al matrix nanocomposites
- (2015) Pengpeng Yuan et al. MATERIALS & DESIGN
- Ceramic reinforced high modulus steel composites: processing, microstructure and properties
- (2014) F. Akhtar CANADIAN METALLURGICAL QUARTERLY
- Effect of heating mode and Y2O3addition on electrochemical response on austenitic and ferritic stainless steels
- (2014) A. Raja Annamalai et al. CORROSION ENGINEERING SCIENCE AND TECHNOLOGY
- Effect of Fe2O3 content on microstructure of Al powder consolidated parts via selective laser melting using various laser powers and speeds
- (2014) S. Dadbakhsh et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of Ni content on microstructure of W–Ni alloy produced by selective laser melting
- (2014) D.Q. Zhang et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Nanometric TiC reinforced AlSi10Mg nanocomposites: Powder preparation by high-energy ball milling and consolidation by selective laser melting
- (2014) Hongqiao Wang et al. JOURNAL OF COMPOSITE MATERIALS
- Metal Additive Manufacturing: A Review
- (2014) William E. Frazier JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Microstructure and Mechanical Behavior of 17-4 Precipitation Hardenable Steel Processed by Selective Laser Melting
- (2014) H. Khalid Rafi et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Shaping of ceramic parts by selective laser melting of powder bed
- (2014) Enrique Juste et al. JOURNAL OF MATERIALS RESEARCH
- Grain boundary segregation induced strengthening of an ultrafine-grained austenitic stainless steel
- (2014) M.M. Abramova et al. MATERIALS LETTERS
- Processing AlSi10Mg by selective laser melting: parameter optimisation and material characterisation
- (2014) K. Kempen et al. MATERIALS SCIENCE AND TECHNOLOGY
- Suppression effect of decarburization by dry-ice blasting on plasma-sprayed steel coatings: Structure, wear performance and magnetic properties
- (2014) Bo Song et al. SURFACE & COATINGS TECHNOLOGY
- Manufacture of Nano-Sized Particle-Reinforced Metal Matrix Composites: A Review
- (2014) Dongshuai Zhou et al. Acta Metallurgica Sinica-English Letters
- Metal Matrix Composites Reinforced by Nano-Particles—A Review
- (2014) Riccardo Casati et al. Metals
- Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control
- (2014) John A. Slotwinski et al. JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY
- Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalum
- (2013) Lore Thijs et al. ACTA MATERIALIA
- Model and simulation predictions of the thermal conductivity of compact random nanoparticle composites
- (2013) Pi-Yueh Chuang et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- A molecular dynamics study of effective thermal conductivity in nanocomposites
- (2013) Zhiting Tian et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Microstructure and tensile behavior of hybrid nano-micro SiC reinforced iron matrix composites produced by selective laser melting
- (2013) Bo Song et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Volume Fraction Effect of V8C7 Particulates on Impact Toughness and Wear Performance of V8C7/Fe Monolithic Composites
- (2013) Fangxia Ye et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Prediction models for the yield strength of particle-reinforced unimodal pure magnesium (Mg) metal matrix nanocomposites (MMNCs)
- (2013) Chang-Soo Kim et al. JOURNAL OF MATERIALS SCIENCE
- Effects of processing parameters on tensile properties of selective laser melted 304 stainless steel
- (2013) Kai Guan et al. MATERIALS & DESIGN
- Effect of build geometry on the β-grain structure and texture in additive manufacture of Ti6Al4V by selective electron beam melting
- (2013) A.A. Antonysamy et al. MATERIALS CHARACTERIZATION
- Characterisations of TiC particle reinforced FeAl composite part fabricated by selective laser melting
- (2013) B. Song et al. MATERIALS RESEARCH INNOVATIONS
- Effects of processing on microstructure and mechanical properties of a titanium alloy (Ti–6Al–4V) fabricated using electron beam melting (EBM), Part 2: Energy input, orientation, and location
- (2013) Nikolas Hrabe et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Selective Laser Melting Additive Manufacturing of Ti-Based Nanocomposites: The Role of Nanopowder
- (2013) Dongdong Gu et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Highly Anisotropic Steel Processed by Selective Laser Melting
- (2013) Thomas Niendorf et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility
- (2013) G. Liu et al. NATURE MATERIALS
- Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
- (2013) Taku Sakai et al. PROGRESS IN MATERIALS SCIENCE
- Comparison of different post processing technologies for SLM generated 316l steel parts
- (2013) Lukas Löber et al. RAPID PROTOTYPING JOURNAL
- Additive manufacturing of ZrO2‐Al2O3 ceramic components by selective laser melting
- (2013) Jan Wilkes et al. RAPID PROTOTYPING JOURNAL
- Rapid in situ fabrication of Fe/SiC bulk nanocomposites by selective laser melting directly from a mixed powder of microsized Fe and SiC
- (2013) Bo Song et al. SCRIPTA MATERIALIA
- Problems and issues in laser beam welding of aluminum–lithium alloys
- (2013) Rongshi Xiao et al. Journal of Manufacturing Processes
- Fatigue and fracture of a 316 stainless steel metal matrix composite reinforced with 25% titanium diboride
- (2012) D.H. Bacon et al. INTERNATIONAL JOURNAL OF FATIGUE
- Single step synthesis of nano vanadium carbide—V8C7 phase
- (2012) Mani Mahajan et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Laser additive manufacturing of metallic components: materials, processes and mechanisms
- (2012) D D Gu et al. INTERNATIONAL MATERIALS REVIEWS
- Elastic and thermo-physical properties of TiC, TiN, and their intermediate composition alloys using ab initio calculations
- (2012) Jiwoong Kim et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of hot isostatic pressing (HIP) on Al composite parts made from laser consolidated Al/Fe2O3 powder mixtures
- (2012) S. Dadbakhsh et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Energy input effect on morphology and microstructure of selective laser melting single track from metallic powder
- (2012) I. Yadroitsev et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Surface roughness analysis, modelling and prediction in selective laser melting
- (2012) Giovanni Strano et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of bimodal distribution in ferrite grain sizes on the tensile properties of low-carbon steels
- (2012) S. Patra et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Control of shape and performance for direct laser fabrication of precision large-scale metal parts with 316L Stainless Steel
- (2012) Mingming Ma et al. OPTICS AND LASER TECHNOLOGY
- The effect of Mg content on microstructure and mechanical properties of Al–xMg/5Al2O3 nanocomposite prepared by mechanical alloying
- (2012) J. Safari et al. POWDER TECHNOLOGY
- Microstructure and wear properties of laser-deposited functionally graded Inconel 690 reinforced with TiC
- (2012) J. Michael Wilson et al. SURFACE & COATINGS TECHNOLOGY
- Nanocrystalline TiC reinforced Ti matrix bulk-form nanocomposites by Selective Laser Melting (SLM): Densification, growth mechanism and wear behavior
- (2011) Dongdong Gu et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Grain size effect on the strengthening behavior of aluminum-based composites containing multi-walled carbon nanotubes
- (2011) H.J. Choi et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Effect of carbon nanofibers content on thermal properties of ceramic nanocomposites
- (2011) A Borrell et al. JOURNAL OF COMPOSITE MATERIALS
- Microstructure and mechanical behaviour of Ti―6Al―7Nb alloy produced by selective laser melting
- (2011) Edward Chlebus et al. MATERIALS CHARACTERIZATION
- Comparison between current models for the strength of particulate-reinforced metal matrix nanocomposites with emphasis on consideration of Hall–Petch effect
- (2011) A. Sanaty-Zadeh MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The investigation of the influence of laser re‐melting on density, surface quality and microstructure of selective laser melting parts
- (2011) Evren Yasa et al. RAPID PROTOTYPING JOURNAL
- Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts
- (2011) A.B. Spierings et al. RAPID PROTOTYPING JOURNAL
- Grain size–wear rate relationship for titanium in liquid nitrogen environment
- (2010) Aditya Jain et al. ACTA MATERIALIA
- A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
- (2010) Lore Thijs et al. ACTA MATERIALIA
- Densification behavior of gas and water atomized 316L stainless steel powder during selective laser melting
- (2010) Ruidi Li et al. APPLIED SURFACE SCIENCE
- The Fe–Ni system: Thermodynamic modelling assisted by atomistic calculations
- (2010) G. Cacciamani et al. INTERMETALLICS
- The effect of laser scanning path on microstructures and mechanical properties of laser solid formed nickel-base superalloy Inconel 718
- (2010) Fencheng Liu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Selective laser melting of aluminium components
- (2010) Eleftherios Louvis et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Fundamental issues of reactive wetting by liquid metals
- (2010) O. Dezellus et al. JOURNAL OF MATERIALS SCIENCE
- Fabrication of Nano-Ce and Application of Nano-Ce in Fe Matrix Composites
- (2010) Wang Tiebao et al. Journal of Nanomaterials
- Microstructural control of maraging steel C300
- (2010) F. Zhu et al. MATERIALS SCIENCE AND TECHNOLOGY
- The Influence of Ni-Coated TiC on Laser-Deposited IN625 Metal Matrix Composites
- (2010) Baolong Zheng et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- The Future of Metals
- (2010) K. Lu SCIENCE
- A finite element model to predict the ablation depth in pulsed laser ablation
- (2010) Nikhil A. Vasantgadkar et al. THIN SOLID FILMS
- In-situ TiC particle reinforced Ti–Al matrix composites: Powder preparation by mechanical alloying and Selective Laser Melting behavior
- (2009) Dongdong Gu et al. APPLIED SURFACE SCIENCE
- On the role of nano-size SiC on lattice strain and grain size of Al/SiC nanocomposite
- (2009) Y. Saberi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Close packing density of polydisperse hard spheres
- (2009) Robert S. Farr et al. JOURNAL OF CHEMICAL PHYSICS
- Selective laser melting of a stainless steel and hydroxyapatite composite for load-bearing implant development
- (2009) L. Hao et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure evolution of grey cast iron powder by high pressure gas atomization
- (2009) Min Yang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Balling phenomena in direct laser sintering of stainless steel powder: Metallurgical mechanisms and control methods
- (2009) Dongdong Gu et al. MATERIALS & DESIGN
- Growth morphologies and mechanisms of TiC grains during Selective Laser Melting of Ti–Al–C composite powder
- (2009) Dongdong Gu et al. MATERIALS LETTERS
- Studies of Standard Heat Treatment Effects on Microstructure and Mechanical Properties of Laser Net Shape Manufactured INCONEL 718
- (2009) H. Qi et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- In-situ surface absorptivity prediction during 1.06 μm wavelength laser low aspect ratio machining of structural ceramics
- (2009) Anoop N. Samant et al. PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE
- Fabrication ofin situTiB2–TiC reinforced steel matrix composites by spark plasma sintering
- (2009) B H Li et al. POWDER METALLURGY
- Top surface and side roughness of Inconel 625 parts processed using selective laser melting
- (2009) Kamran Mumtaz et al. RAPID PROTOTYPING JOURNAL
- Microstructure and Wear Properties of In Situ Synthesized VC Carbide Reinforced Fe-based Surface Composite Coating Produced by Laser Cladding
- (2009) X. H. Wang et al. TRIBOLOGY LETTERS
- Microstructure and interface interaction in laser induction hybrid cladding of Ni-based coating
- (2008) Yongjun Huang et al. APPLIED SURFACE SCIENCE
- Enhancing compressive response of AZ31B magnesium alloy using alumina nanoparticulates
- (2008) Q NGUYEN et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Formation of nanocrystalline TiC from titanium and different carbon sources by mechanical alloying
- (2008) Haoling Jia et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure and Properties of Laser-Deposited Ti6Al4V Metal Matrix Composites Using Ni-Coated Powder
- (2008) B. Zheng et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Contribution of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites
- (2007) Z. Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure characteristics of Ni-based WC composite coatings by laser induction hybrid rapid cladding
- (2007) Shengfeng Zhou et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Create your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create NowBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started