A Review of Lithium‐Ion Battery Electrode Drying: Mechanisms and Metrology
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
A Review of Lithium‐Ion Battery Electrode Drying: Mechanisms and Metrology
Authors
Keywords
-
Journal
Advanced Energy Materials
Volume 12, Issue 2, Pages 2102233
Publisher
Wiley
Online
2021-11-29
DOI
10.1002/aenm.202102233
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- In Situ Ultrasound Acoustic Measurement of the Lithium-Ion Battery Electrode Drying Process
- (2021) Ye Shui Zhang et al. ACS Applied Materials & Interfaces
- 4D imaging of lithium-batteries using correlative neutron and X-ray tomography with a virtual unrolling technique
- (2020) Ralf F. Ziesche et al. Nature Communications
- In-situ Investigations of Simultaneous Two-Layer Slot Die Coating of Component Graded Anodes for improved High Energy Li-Ion Batteries
- (2020) Ralf Diehm et al. Energy Technology
- Influence of Water Contamination on the SEI Formation in Li-Ion Cells: An Operando EQCM-D Study
- (2020) Paul G. Kitz et al. ACS Applied Materials & Interfaces
- 3D microstructure design of lithium-ion battery electrodes assisted by X-ray nano-computed tomography and modelling
- (2020) Xuekun Lu et al. Nature Communications
- Operando Electrochemical Atomic Force Microscopy of Solid–Electrolyte Interphase Formation on Graphite Anodes: The Evolution of SEI Morphology and Mechanical Properties
- (2020) Zhenyu Zhang et al. ACS Applied Materials & Interfaces
- Water-Based Electrode Manufacturing and Direct Recycling of Lithium-Ion Battery Electrodes—A Green and Sustainable Manufacturing System
- (2020) Jianlin Li et al. iScience
- Insights into the Nanostructure, Solvation, and Dynamics of Liquid Electrolytes through Small‐Angle X‐Ray Scattering
- (2020) Kun Qian et al. Advanced Energy Materials
- Classification of calendering induced electrode defects and their influence on subsequent processes of lithium‐ion battery production
- (2019) Till Günther et al. Energy Technology
- In Operando Probing of Lithium‐Ion Storage on Single‐Layer Graphene
- (2019) Kun Ni et al. ADVANCED MATERIALS
- A review on various temperature-indication methods for Li-ion batteries
- (2019) L.H.J. Raijmakers et al. APPLIED ENERGY
- Steering and in situ monitoring of drying phenomena during film fabrication
- (2019) Fabian Scheepers et al. Journal of Coatings Technology and Research
- Toward Data‐Driven Applications in Lithium‐Ion Battery Cell Manufacturing
- (2019) Artem Turetskyy et al. Energy Technology
- The influence of different post‐drying procedures on remaining water content and physical and electrochemical properties of lithium‐ion‐batteries
- (2019) F. Huttner et al. Energy Technology
- Enabling Stable Lithium Metal Anode through Electrochemical Kinetics Manipulation
- (2019) Yehu Han et al. ADVANCED FUNCTIONAL MATERIALS
- Nanoscale X-ray imaging of ageing in automotive lithium ion battery cells
- (2019) Christiane Rahe et al. JOURNAL OF POWER SOURCES
- Drying of Lithium‐Ion Battery Anodes for Use in High‐Energy Cells: Influence of Electrode Thickness on Drying Time, Adhesion, and Crack Formation
- (2019) Jana Kumberg et al. Energy Technology
- Dynamic Lithium Distribution upon Dendrite Growth and Shorting Revealed by Operando Neutron Imaging
- (2019) Bohang Song et al. ACS Energy Letters
- Modeling the effect of electrode thickness on the performance of lithium-ion batteries with experimental validation
- (2019) Meng Xu et al. ENERGY
- Electrode manufacturing for lithium-ion batteries—Analysis of current and next generation processing
- (2019) W. Blake Hawley et al. Journal of Energy Storage
- Understanding the role of the porous electrode microstructure in redox flow battery performance using an experimentally validated 3D pore-scale lattice Boltzmann model
- (2019) Duo Zhang et al. JOURNAL OF POWER SOURCES
- In situ analytical techniques for battery interface analysis
- (2018) Alok M. Tripathi et al. CHEMICAL SOCIETY REVIEWS
- Complementary Strategies Toward the Aqueous Processing of High-Voltage LiNi0.5 Mn1.5 O4 Lithium-Ion Cathodes
- (2018) Matthias Kuenzel et al. ChemSusChem
- Generation of virtual lithium-ion battery electrode microstructures based on spatial stochastic modeling
- (2018) Daniel Westhoff et al. COMPUTATIONAL MATERIALS SCIENCE
- Binder migration during drying of lithium-ion battery electrodes: Modelling and comparison to experiment
- (2018) F. Font et al. JOURNAL OF POWER SOURCES
- Modeling and analysis of solvent removal during Li-ion battery electrode drying
- (2018) Naresh Susarla et al. JOURNAL OF POWER SOURCES
- Quantitative Visualization of Salt Concentration Distributions in Lithium-Ion Battery Electrolytes during Battery Operation Using X-ray Phase Imaging
- (2018) Daiko Takamatsu et al. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
- Quantifying Inhomogeneity of Lithium Ion Battery Electrodes and Its Influence on Electrochemical Performance
- (2018) Simon Müller et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Current status and challenges for automotive battery production technologies
- (2018) Arno Kwade et al. Nature Energy
- Functional Scanning Force Microscopy for Energy Nanodevices
- (2018) Xi Chen et al. ADVANCED MATERIALS
- Recent Development of Peakforce Tapping Mode Atomic Force Microscopy and its Applications on Nanoscience
- (2018) Ke Xu et al. Nanotechnology Reviews
- Operando EQCM-D with Simultaneous in Situ EIS: New Insights into Interphase Formation in Li Ion Batteries
- (2018) Paul G. Kitz et al. ANALYTICAL CHEMISTRY
- A personal view on pore network models in drying technology
- (2018) Thomas Metzger DRYING TECHNOLOGY
- Data mining in lithium-ion battery cell production
- (2018) Joscha Schnell et al. JOURNAL OF POWER SOURCES
- Toward Low-Cost, High-Energy Density, and High-Power Density Lithium-Ion Batteries
- (2017) Jianlin Li et al. JOM
- Elemental analysis of lithium ion batteries
- (2017) Sascha Nowak et al. JOURNAL OF ANALYTICAL ATOMIC SPECTROMETRY
- Experimental investigation into battery electrode surfaces: The distribution of liquid at the surface and the emptying of pores during drying
- (2017) Stefan Jaiser et al. JOURNAL OF COLLOID AND INTERFACE SCIENCE
- New method for binder and carbon black detection at nanometer scale in carbon electrodes for lithium ion batteries
- (2017) Lukas Pfaffmann et al. JOURNAL OF POWER SOURCES
- Microstructure formation of lithium-ion battery electrodes during drying – An ex-situ study using cryogenic broad ion beam slope-cutting and scanning electron microscopy (Cryo-BIB-SEM)
- (2017) Stefan Jaiser et al. JOURNAL OF POWER SOURCES
- Investigation of binder distribution in graphite anodes for lithium-ion batteries
- (2017) Marcus Müller et al. JOURNAL OF POWER SOURCES
- Enabling aqueous processing for crack-free thick electrodes
- (2017) Zhijia Du et al. JOURNAL OF POWER SOURCES
- An extended polarization model to study the influence of current collector geometry of large-format lithium-ion pouch cells
- (2017) Stephan Kosch et al. JOURNAL OF POWER SOURCES
- Drying and moisture resorption behaviour of various electrode materials and separators for lithium-ion batteries
- (2017) Michael Stich et al. JOURNAL OF POWER SOURCES
- State of Charge and State of Health Estimation Using Electrochemical Acoustic Time of Flight Analysis
- (2017) Greg Davies et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Electrode Slurry Particle Density Mapping Using X-ray Radiography
- (2017) Kenneth Higa et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Mechanistic Understanding of the Role of Evaporation in Electrode Processing
- (2017) Malcolm Stein et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Mercury intrusion for ion- and conversion-based battery electrodes – Structure and diffusion coefficient determination
- (2017) Linus Froboese et al. MATERIALS CHARACTERIZATION
- In situ real-time gravimetric and viscoelastic probing of surface films formation on lithium batteries electrodes
- (2017) Vadim Dargel et al. Nature Communications
- Novel conductive binder for high-performance silicon anodes in lithium ion batteries
- (2017) Dong Liu et al. Nano Energy
- A review of the operating limits in slot die coating processes
- (2016) Xiaoyu Ding et al. AICHE JOURNAL
- Experimental and simulated temperature variations in a LiFePO 4 -20 Ah battery during discharge process
- (2016) S. Panchal et al. APPLIED ENERGY
- Lithium-Ionen-Technologie und was danach kommen könnte
- (2016) Peter Bieker et al. CHEMIE IN UNSERER ZEIT
- Towards high durable lithium ion batteries with waterborne LiFePO 4 electrodes
- (2016) Andriy Kvasha et al. ELECTROCHIMICA ACTA
- Comparison of three-dimensional analysis and stereological techniques for quantifying lithium-ion battery electrode microstructures
- (2016) OLUWADAMILOLA O. TAIWO et al. JOURNAL OF MICROSCOPY
- In Situ Raman and Nuclear Magnetic Resonance Study of Trapped Lithium in the Solid Electrolyte Interface of Reduced Graphene Oxide
- (2016) Wei Tang et al. Journal of Physical Chemistry C
- Effect of electrode manufacturing defects on electrochemical performance of lithium-ion batteries: Cognizance of the battery failure sources
- (2016) D. Mohanty et al. JOURNAL OF POWER SOURCES
- Investigation of film solidification and binder migration during drying of Li-Ion battery anodes
- (2016) Stefan Jaiser et al. JOURNAL OF POWER SOURCES
- The interaction of consecutive process steps in the manufacturing of lithium-ion battery electrodes with regard to structural and electrochemical properties
- (2016) Henrike Bockholt et al. JOURNAL OF POWER SOURCES
- Experiment and simulation of the fabrication process of lithium-ion battery cathodes for determining microstructure and mechanical properties
- (2016) Mehdi M. Forouzan et al. JOURNAL OF POWER SOURCES
- Thick electrodes for Li-ion batteries: A model based analysis
- (2016) Timo Danner et al. JOURNAL OF POWER SOURCES
- Intensive powder mixing for dry dispersing of carbon black and its relevance for lithium-ion battery cathodes
- (2016) Henrike Bockholt et al. POWDER TECHNOLOGY
- Conveying Advanced Li-ion Battery Materials into Practice The Impact of Electrode Slurry Preparation Skills
- (2016) Alexander Kraytsberg et al. Advanced Energy Materials
- Analyzing Bending Stresses on Lithium-Ion Battery Cathodes induced by the Assembly Process
- (2016) Antje Schilling et al. Energy Technology
- Techniques and Challenges for Characterizing Metal Thin Films with Applications in Photonics
- (2016) Paul Whiteside et al. Coatings
- Quantification of the Mass and Viscoelasticity of Interfacial Films on Tin Anodes Using EQCM-D
- (2015) Zhenzhen Yang et al. ACS Applied Materials & Interfaces
- Delamination behavior of lithium-ion battery anodes: Influence of drying temperature during electrode processing
- (2015) M. Baunach et al. DRYING TECHNOLOGY
- Large-Scale Production of MoO 3 -Reduced Graphene Oxide Powders with Superior Lithium Storage Properties by Spray-Drying Process
- (2015) Gi Dae Park et al. ELECTROCHIMICA ACTA
- Comparative Study of Surface Temperature Behavior of Commercial Li-Ion Pouch Cells of Different Chemistries and Capacities by Infrared Thermography
- (2015) Shovon Goutam et al. Energies
- Electrochemical-acoustic time of flight: in operando correlation of physical dynamics with battery charge and health
- (2015) A. G. Hsieh et al. Energy & Environmental Science
- Stress Development of Li-Ion Battery Anode Slurries during the Drying Process
- (2015) Sanghyuk Lim et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Quality control tool of electrode coating for lithium-ion batteries based on X-ray radiography
- (2015) A. Etiemble et al. JOURNAL OF POWER SOURCES
- Component-/structure-dependent elasticity of solid electrolyte interphase layer in Li-ion batteries: Experimental and computational studies
- (2015) Hosop Shin et al. JOURNAL OF POWER SOURCES
- The effect of binders on the rheological properties and the microstructure formation of lithium-ion battery anode slurries
- (2015) Sanghyuk Lim et al. JOURNAL OF POWER SOURCES
- Thermal imaging of solid oxide cells operating under electrolysis conditions
- (2015) D.J. Cumming et al. JOURNAL OF POWER SOURCES
- Solvation effect on intercalation behaviour of tetrafluoroborate into graphite electrode
- (2015) Jichao Gao et al. JOURNAL OF POWER SOURCES
- Prospects for reducing the processing cost of lithium ion batteries
- (2015) David L. Wood et al. JOURNAL OF POWER SOURCES
- In situ FTIR and Raman spectroelectrochemical characterization of graphene oxide upon electrochemical reduction in organic solvents
- (2015) Antti Viinikanoja et al. PHYSICAL CHEMISTRY CHEMICAL PHYSICS
- Structural evolution of a catalyst ink for fuel cells during the drying process investigated by CV-SANS
- (2015) Takumi Kusano et al. POLYMER JOURNAL
- Opportunities and challenges in liquid cell electron microscopy
- (2015) F. M. Ross SCIENCE
- In-operando high-speed tomography of lithium-ion batteries during thermal runaway
- (2015) Donal P. Finegan et al. Nature Communications
- Detection of Internal Defects in Lithium-Ion Batteries Using Lock-in Thermography
- (2015) J. B. Robinson et al. ECS Electrochemistry Letters
- Influence of Solvent Evaporation Rate in the Preparation of Carbon-Coated Lithium Iron Phosphate Cathode Films on Battery Performance
- (2015) Attila Gören et al. Energy Technology
- Advanced computational modelling for drying processes – A review
- (2014) Thijs Defraeye APPLIED ENERGY
- Prozess- und Produktentwicklung von Elektroden für Li-Ionen-Zellen
- (2014) Jörg Kaiser et al. CHEMIE INGENIEUR TECHNIK
- Electrode design optimization of lithium secondary batteries to enhance adhesion and deformation capabilities
- (2014) Dongho Jeong et al. ENERGY
- Insitu Raman study of lithium-ion intercalation into microcrystalline graphite
- (2014) Christopher Sole et al. FARADAY DISCUSSIONS
- Corrosion of aluminum electrodes in aqueous slurries for lithium-ion batteries
- (2014) Benjamin C. Church et al. JOURNAL OF MATERIALS SCIENCE
- Microstructure Evolution in Lithium-Ion Battery Electrode Processing
- (2014) Zhixiao Liu et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Mesoscale Elucidation of the Influence of Mixing Sequence in Electrode Processing
- (2014) Zhixiao Liu et al. LANGMUIR
- Influence of formulation method and related processes on structural, electrical and electrochemical properties of LMS/NCA-blend electrodes
- (2014) W. Haselrieder et al. PROGRESS IN SOLID STATE CHEMISTRY
- Influence of Mixing Technology and the Potential to Modify the Morphological Properties of Materials used in the Manufacture of Lithium-Ion Batteries
- (2014) Valentin Wenzel et al. Energy Technology
- Non-destructive evaluation of slot-die-coated lithium secondary battery electrodes by in-line laser caliper and IR thermography methods
- (2013) Debasish Mohanty et al. Analytical Methods
- Characterization of a model solid electrolyte interphase/carbon interface by combined in situ Raman/Fourier transform infrared microscopy
- (2013) S. Pérez-Villar et al. ELECTROCHIMICA ACTA
- Three-Dimensional Thermal Model of a Lithium Ion Battery for Hybrid Mobile Working Machines: Determination of the Model Parameters in a Pouch Cell
- (2013) Kirill Murashko et al. IEEE TRANSACTIONS ON ENERGY CONVERSION
- Slot die coating of lithium-ion battery electrodes: investigations on edge effect issues for stripe and pattern coatings
- (2013) Marcel Schmitt et al. Journal of Coatings Technology and Research
- A Raman spectroscopic method to find binder distribution in electrodes during drying
- (2013) Hideki Hagiwara et al. Journal of Coatings Technology and Research
- Optimization of multicomponent aqueous suspensions of lithium iron phosphate (LiFePO4) nanoparticles and carbon black for lithium-ion battery cathodes
- (2013) Jianlin Li et al. JOURNAL OF COLLOID AND INTERFACE SCIENCE
- A study of carbon deposition on solid oxide fuel cell anodes using electrochemical impedance spectroscopy in combination with a high temperature crystal microbalance
- (2013) Jason Millichamp et al. JOURNAL OF POWER SOURCES
- Non-uniform temperature distribution in Li-ion batteries during discharge – A combined thermal imaging, X-ray micro-tomography and electrochemical impedance approach
- (2013) James B. Robinson et al. JOURNAL OF POWER SOURCES
- Enabling aqueous binders for lithium battery cathodes – Carbon coating of aluminum current collector
- (2013) Italo Doberdò et al. JOURNAL OF POWER SOURCES
- Fast Dynamics and Relaxation of Colloidal Drops during the Drying Process Using Multispeckle Diffusing Wave Spectroscopy
- (2013) Jeong Yong Lee et al. LANGMUIR
- Latex Migration in Battery Slurries during Drying
- (2013) Sanghyuk Lim et al. LANGMUIR
- Drying of a Charge-Stabilized Colloidal Suspension in Situ Monitored by Vertical Small-Angle X-ray Scattering
- (2013) Sunhyung Kim et al. LANGMUIR
- Validity of the Bruggeman relation for porous electrodes
- (2013) Ding-Wen Chung et al. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- Spray Drying Method for Large-Scale and High-Performance Silicon Negative Electrodes in Li-Ion Batteries
- (2013) Dae Soo Jung et al. NANO LETTERS
- Self-healing chemistry enables the stable operation of silicon microparticle anodes for high-energy lithium-ion batteries
- (2013) Chao Wang et al. Nature Chemistry
- Tortuosity Anisotropy in Lithium-Ion Battery Electrodes
- (2013) Martin Ebner et al. Advanced Energy Materials
- X-Ray Tomography of Porous, Transition Metal Oxide Based Lithium Ion Battery Electrodes
- (2013) Martin Ebner et al. Advanced Energy Materials
- Slot-die processing of lithium-ion battery electrodes—Coating window characterization
- (2012) Marcel Schmitt et al. CHEMICAL ENGINEERING AND PROCESSING
- In Situ X-ray Study of the Solid Electrolyte Interphase (SEI) Formation on Graphene as a Model Li-ion Battery Anode
- (2012) Sudeshna Chattopadhyay et al. CHEMISTRY OF MATERIALS
- Flexible and conductive nanocomposite electrode based on graphene sheets and cotton cloth for supercapacitor
- (2012) Wen-wen Liu et al. JOURNAL OF MATERIALS CHEMISTRY
- Hollow carbon cage with nanocapsules of graphitic shell/nickel core as an anode material for high rate lithium ion batteries
- (2012) Guangmin Zhou et al. JOURNAL OF MATERIALS CHEMISTRY
- Cooperation between Active Material, Polymeric Binder and Conductive Carbon Additive in Lithium Ion Battery Cathode
- (2012) Honghe Zheng et al. Journal of Physical Chemistry C
- Correlationship between electrode mechanics and long-term cycling performance for graphite anode in lithium ion cells
- (2012) Honghe Zheng et al. JOURNAL OF POWER SOURCES
- Calendering effects on the physical and electrochemical properties of Li[Ni1/3Mn1/3Co1/3]O2 cathode
- (2012) Honghe Zheng et al. JOURNAL OF POWER SOURCES
- Optimization of LiFePO4 Nanoparticle Suspensions with Polyethyleneimine for Aqueous Processing
- (2012) Jianlin Li et al. LANGMUIR
- XPS, XRD and SEM characterization of a thin ceria layer deposited onto graphite electrode for application in lithium-ion batteries
- (2011) Jolanta Światowska et al. APPLIED SURFACE SCIENCE
- Effect of soluble polymer binder on particle distribution in a drying particulate coating
- (2011) Felix Buss et al. JOURNAL OF COLLOID AND INTERFACE SCIENCE
- Impact of film drying procedures on RDE characterization of Pt/VC electrocatalysts
- (2011) Yannick Garsany et al. JOURNAL OF ELECTROANALYTICAL CHEMISTRY
- Binder Distributions in Water-Based and Organic-Based LiCoO2 Electrode Sheets and Their Effects on Cell Performance
- (2011) Chia-Chen Li et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Observation of New States of Liquid Crystal 8CB under Nonlinear Shear Conditions as Observed via a Novel and Unique Rheology/Small-Angle X-ray Scattering Combination
- (2011) Bernd Struth et al. LANGMUIR
- Drying Dip-Coated Colloidal Films
- (2011) Joaquim Li et al. LANGMUIR
- Autostratification in Drying Colloidal Dispersions: Effect of Particle Interactions
- (2011) Anand K. Atmuri et al. LANGMUIR
- Drying regime maps for particulate coatings
- (2010) Christine M. Cardinal et al. AICHE JOURNAL
- Experimental Methods for Quantifying the Activity of Platinum Electrocatalysts for the Oxygen Reduction Reaction
- (2010) Yannick Garsany et al. ANALYTICAL CHEMISTRY
- Life cycle assessment of lithium-ion batteries for plug-in hybrid electric vehicles – Critical issues
- (2010) Mats Zackrisson et al. JOURNAL OF CLEANER PRODUCTION
- The effect of adsorption kinetics on film formation of silica/PVA suspension
- (2010) Sunhyung Kim et al. JOURNAL OF COLLOID AND INTERFACE SCIENCE
- Effect of slurry preparation process on electrochemical performances of LiCoO2 composite electrode
- (2010) Gil-Won Lee et al. JOURNAL OF POWER SOURCES
- Materials processing for lithium-ion batteries
- (2010) Jianlin Li et al. JOURNAL OF POWER SOURCES
- Using Poly(4-Styrene Sulfonic Acid) to Improve the Dispersion Homogeneity of Aqueous-Processed LiFePO[sub 4] Cathodes
- (2010) Chia-Chen Li et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- The Migration of Styrene Butadiene Latex during the Drying of Coating Suspensions: When and How Does Migration of Colloidal Particles Occur?
- (2010) Yong-Hua Zang et al. LANGMUIR
- Noise in laser speckle correlation and imaging techniques
- (2010) S. E. Skipetrov et al. OPTICS EXPRESS
- Efficiency of different dispersing devices for dispersing nanosized silica and alumina
- (2010) Carsten Schilde et al. POWDER TECHNOLOGY
- Monitoring Spatially Heterogeneous Dynamics in a Drying Colloidal Thin Film
- (2010) P. Zakharov et al. SOFT MATERIALS
- Raman Microspectrometry Applied to the Study of Electrode Materials for Lithium Batteries
- (2009) Rita Baddour-Hadjean et al. CHEMICAL REVIEWS
- Drying-Induced Cracks in Thin Film Fabricated from Colloidal Dispersions
- (2009) Peng Xu et al. DRYING TECHNOLOGY
- Optimizing the surfactant for the aqueous processing of LiFePO4 composite electrodes
- (2009) W. Porcher et al. JOURNAL OF POWER SOURCES
- Porous cathode optimization for lithium cells: Ionic and electronic conductivity, capacity, and selection of materials
- (2009) Y.-H. Chen et al. JOURNAL OF POWER SOURCES
- Thermal imaging of solid oxide fuel cell anode processes
- (2009) Michael B. Pomfret et al. JOURNAL OF POWER SOURCES
- Design of Aqueous Processed Thick LiFePO[sub 4] Composite Electrodes for High-Energy Lithium Battery
- (2009) W. Porcher et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Drying of the Silica/PVA Suspension: Effect of Suspension Microstructure
- (2009) Sunhyung Kim et al. LANGMUIR
- Polymer solar cell modules prepared using roll-to-roll methods: Knife-over-edge coating, slot-die coating and screen printing
- (2009) Frederik C. Krebs SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Syntheses of Opened Hollow Clay Microspheres through a Spray-Drying Approach and Their Derivative Clay/Carbon Nanotubes Composites
- (2008) Xiaohua Du et al. Journal of Physical Chemistry C
- Surface film morphology (AFM) and chemical features (XPS) of cycled V2O5 thin films in lithium microbatteries
- (2008) B. Fleutot et al. JOURNAL OF POWER SOURCES
- Aging of LiFePO4 upon exposure to H2O
- (2008) K. Zaghib et al. JOURNAL OF POWER SOURCES
- Quantifying tortuosity in porous Li-ion battery materials
- (2008) Indrajeet V. Thorat et al. JOURNAL OF POWER SOURCES
- Marangoni Effects on Evaporative Lithographic Patterning of Colloidal Films
- (2008) Daniel J. Harris et al. LANGMUIR
- Ceramic Nanoparticle/Monodisperse Latex Coatings
- (2008) Hui Luo et al. LANGMUIR
- Dynamics of Drying in 3D Porous Media
- (2008) Lei Xu et al. PHYSICAL REVIEW LETTERS
- Dispersion properties of aqueous-based LiFePO4 pastes and their electrochemical performance for lithium batteries
- (2008) Jin-Hyon Lee et al. ULTRAMICROSCOPY
- Influence of hydrostatic pressure and sound amplitude on the ultrasound induced dispersion and de-agglomeration of nanoparticles
- (2007) C. Sauter et al. ULTRASONICS SONOCHEMISTRY
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started