Development and characterization of Co-Cu/Ti3SiC2 self-lubricating wear resistant composite coatings on Ti6Al4V alloy by laser cladding

Development of Co-Based Amorphous Composite Coatings Synthesized by Laser Cladding for Neutron Shielding

(2021) Xiaobin Liu et al.   Materials

High temperature phase stability and wear behavior of laser clad Ta reinforced NiCrBSi coating

(2021) Ting Yu et al.   APPLIED SURFACE SCIENCE

Effects of Cu and WS2 addition on microstructural evolution and tribological properties of self-lubricating anti-wear coatings prepared by laser cladding

(2021) Jianhui Yuan et al.   TRIBOLOGY INTERNATIONAL

Sensitization of TiO2 nanotube arrays photoelectrode via homogeneous distribution of CdSe nanoparticles by electrodeposition techniques

(2021) Asmaa Kadim Ayal et al.   JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS

Microstructure evolution and high-temperature tribological behavior of Ti3SiC2 reinforced Ni60 composite coatings on 304 stainless steel by laser cladding

(2021) Yi-Fan Liu et al.   SURFACE & COATINGS TECHNOLOGY

Theoretical and experimental exploration on the micro asperity contact load ratios and lubrication regimes transition for water-lubricated stern tube bearing

(2021) Zhongliang Xie et al.   TRIBOLOGY INTERNATIONAL

Characterization of surface modification by laser cladding using low melting point metal

(2020) Chan Kyu Kim et al.   JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY

Fabrication and tribological behaviors of Ti3SiC2/Ti5Si3/TiC/Ni-based composite coatings by laser cladding for self-lubricating applications

(2020) Hua Yan et al.   OPTICS AND LASER TECHNOLOGY

Effect of WC-12Co content on wear and electrochemical corrosion properties of Ni-Cu/WC-12Co composite coatings deposited by laser cladding

(2020) Jiaqi Zhang et al.   SURFACE & COATINGS TECHNOLOGY

Effect of heat treatment on phase stability and wear behavior of laser clad AlCoCrFeNiTi0.8 high-entropy alloy coatings

(2020) Hao Liu et al.   SURFACE & COATINGS TECHNOLOGY

Microstructure and tribological performance of Ni60-based composite coatings on Ti6Al4V alloy with different Ti3SiC2 ceramic additions by laser cladding

(2020) Yang Wang et al.   CERAMICS INTERNATIONAL

Effect of magnetic field on tribological properties of Co-based alloy layer produced by laser cladding on 42CrMo

(2020) Kang Qi et al.   MATERIALS LETTERS

A comparative study on microstructure and properties of traditional laser cladding and high-speed laser cladding of Ni45 alloy coatings

(2020) Wuyan Yuan et al.   SURFACE & COATINGS TECHNOLOGY

Improving surface resistance to wear and corrosion of nickel‑aluminum bronze by laser-clad TaC/Co-based alloy composite coatings

(2020) Zhiyuan Li et al.   SURFACE & COATINGS TECHNOLOGY

Numerical analysis of the activated combustion high-velocity air-fuel (AC-HVAF) thermal spray process: A survey on the parameters of operation and nozzle geometry

(2020) Xing Gao et al.   SURFACE & COATINGS TECHNOLOGY

Investigation on wear mechanisms of PVD coatings for form taps in threading of Al–Si alloy

(2020) Rohan Kumar Barooah et al.   WEAR

Preparation and high temperature tribological properties of laser in-situ synthesized self-lubricating composite coatings containing metal sulfides on Ti6Al4V alloy

(2019) Zhong-Yan Zhou et al.   APPLIED SURFACE SCIENCE

Manufacturing of Ti3SiC2 lubricated Co-based alloy coatings using laser cladding technology

(2019) X. Li et al.   OPTICS AND LASER TECHNOLOGY

Microstructure and wear properties of self-lubricating TiB2-TiC N ceramic coatings on Ti-6Al-4V alloy fabricated by laser surface alloying

(2019) Jingjie Dai et al.   SURFACE & COATINGS TECHNOLOGY

The tribology of Ag/MoS2-based self-lubricating laser claddings for high temperature forming of aluminium alloys

(2019) H. Torres et al.   WEAR

In-situ reaction of Ti-Si-C composite powder and formation mechanism of laser deposited Ti6Al4V/ (TiC+Ti3SiC2) system functionally graded material

(2019) Neng Li et al.   MATERIALS & DESIGN

Microstructural evolution, coarsening behavior of precipitates and mechanical properties of boron bearing steel 25CrMoNbB during tempering

(2018) Yaxu Zheng et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

High temperature wear in CoCrFeNiCux high entropy alloys: The role of Cu

(2018) A. Verma et al.   SCRIPTA MATERIALIA

Tribological behaviour of self-lubricating materials at high temperatures

(2017) Hector Torres et al.   INTERNATIONAL MATERIALS REVIEWS

Analytical and experimental investigation of the effect of SPS and hot rolling on the microstructure and flexural behavior of Ti6Al4V matrix reinforced with in-situ TiB and TiC

(2017) Saeid Ghesmati Tabrizi et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of process parameters on the microstructure evolution and wear property of the laser cladding coatings on Ti-6Al-4V alloy

(2017) Fei Weng et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Improved high-temperature hardness and wear resistance of Inconel 625 coatings fabricated by laser cladding

(2017) Kai Feng et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Microstructure and wear property of the Ti 5 Si 3 /TiC reinforced Co-based coatings fabricated by laser cladding on Ti-6Al-4V

(2017) Fei Weng et al.   OPTICS AND LASER TECHNOLOGY

Microstructure and tribological performance of sulfurizing layer prepared on the laser cladding Co-based alloy coating

(2017) Gang Cui et al.   SURFACE & COATINGS TECHNOLOGY

Influence of Cu on the mechanical and tribological properties of Ti 3 SiC 2

(2016) Wentao Dang et al.   CERAMICS INTERNATIONAL

Microstructure and property of composite coatings on titanium alloy deposited by laser cladding with Co42+TiN mixed powders

(2016) Fei Weng et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Fabrication of Co-Based Coatings on Titanium Alloy by Laser Cladding with CeO2Addition

(2016) Fei Weng et al.   MATERIALS AND MANUFACTURING PROCESSES

The effect of TiC/Al2O3 composite ceramic reinforcement on tribological behavior of laser cladding Ni60 alloys coatings

(2016) Yangchuan Cai et al.   SURFACE & COATINGS TECHNOLOGY

Microstructures and properties of TiN reinforced Co-based composite coatings modified with Y 2 O 3 by laser cladding on Ti–6Al–4V alloy

(2015) Fei Weng et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructures and wear properties of laser cladding Co-based composite coatings on Ti–6Al–4V

(2015) Fei Weng et al.   MATERIALS & DESIGN

Hard coatings with high temperature adaptive lubrication and contact thermal management: review

(2014) A.A. Voevodin et al.   SURFACE & COATINGS TECHNOLOGY

Effect of shotpeening on sliding wear and tensile behavior of titanium implant alloys

(2013) B.K.C. Ganesh et al.   MATERIALS & DESIGN

Laser cladding of Co-based alloy/TiC/CaF2 self-lubricating composite coatings on copper for continuous casting mold

(2013) Hua Yan et al.   SURFACE & COATINGS TECHNOLOGY

Influence of Ti3SiC2 content on tribological properties of NiAl matrix self-lubricating composites

(2012) Xiaoliang Shi et al.   MATERIALS & DESIGN

Evolution of the microstructure and tribological performance of Ti–6Al–4V cladding with TiN powder

(2011) Yu-Chi Lin et al.   MATERIALS & DESIGN

Microstructure and tribological properties of Ti–Cu intermetallic compound coating

(2011) Chun Guo et al.   MATERIALS & DESIGN

Improvement in tribological properties of atmospheric plasma-sprayed WC–Co coating followed by Cu electrochemical impregnation

(2009) Jianhui Yuan et al.   APPLIED SURFACE SCIENCE