Insight into solidification microstructure control by trace TiCN–TiB2 particles for yielding fine-tuned nanoprecipitates in a hypoeutectic Al–Si–Mg alloy
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Insight into solidification microstructure control by trace TiCN–TiB2 particles for yielding fine-tuned nanoprecipitates in a hypoeutectic Al–Si–Mg alloy
Authors
Keywords
Al–10Si–2.0 Mg alloys, In situ TiCN–TiB, 2, particles, Solidification microstructure, Precipitation kinetics, GP zones/pre-, '', nanoprecipitates, Mechanical properties
Journal
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Volume 827, Issue -, Pages 142093
Publisher
Elsevier BV
Online
2021-09-21
DOI
10.1016/j.msea.2021.142093
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Interface formation and bonding control in high-volume-fraction (TiC+TiB2)/Al composites and their roles in enhancing properties
- (2021) Hong-Yu Yang et al. COMPOSITES PART B-ENGINEERING
- Elevated temperature mechanical properties of TiCN reinforced AlSi10Mg fabricated by laser powder bed fusion additive manufacturing
- (2021) Peidong He et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Fracture resistance of AlSi10Mg fabricated by laser powder bed fusion
- (2021) Moses J. Paul et al. ACTA MATERIALIA
- Enhancing strength-ductility synergy and mechanisms of Al-based composites by size-tunable in-situ TiB2 particles with specific spatial distribution
- (2021) Bai-Xin Dong et al. COMPOSITES PART B-ENGINEERING
- Role of trace nanoparticles in establishing fully optimized microstructure configuration of cold-rolled Al alloy
- (2021) Tian-Shu Liu et al. MATERIALS & DESIGN
- Unprecedented enhancement in strength-plasticity synergy of (TiC+Al6MoTi+Mo)/Al cermet by multiple length-scale microstructure stimulated synergistic deformation
- (2021) Hong-Yu Yang et al. COMPOSITES PART B-ENGINEERING
- Processing, multiscale microstructure refinement and mechanical property enhancement of hypoeutectic Al–Si alloys via in situ bimodal-sized TiB2 particles
- (2020) Qiang Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of Mg content on age-hardening response, tensile properties, and microstructures of a T5-treated thixo-cast hypoeutectic Al–Si alloy
- (2020) K. Yamamoto et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of process conditions on microstructures and mechanical properties of T5-treated 357 aluminum alloys
- (2020) K. Yamamoto et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of minor lanthanum on the microstructures, tensile and electrical properties of Al-Fe alloys
- (2020) Hongxiang Jiang et al. MATERIALS & DESIGN
- Instability of in situ TiC particles in an Al-12Si alloy
- (2020) F. Xia et al. Journal of Materials Research and Technology-JMR&T
- Design of solute clustering during thermomechanical processing of AA6016 Al–Mg–Si alloy
- (2020) Suqin Zhu et al. ACTA MATERIALIA
- Effect of different heat-treatment routes on the impact properties of an additively manufactured AlSi10Mg alloy
- (2020) Maverick Giovagnoli et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Evaluation of the impact behaviour of AlSi10Mg alloy produced using laser additive manufacturing
- (2019) Luca Girelli et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of A356 alloy with yttrium addition processed by hot extrusion
- (2019) Zhifan Wei et al. JOURNAL OF RARE EARTHS
- Utilizing a novel modifier to realize multi-refinement and optimized heat treatment of A356 alloy
- (2019) Da-yong Wu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Precipitation in an A356 foundry alloy with Cu additions - A transmission electron microscopy study
- (2019) Eva A. Mørtsell et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Mechanical properties and fracture of in-situ Al3Ti particulate reinforced A356 composites
- (2019) Siming Ma et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure refinement and strengthening mechanisms of bimodal-sized and dual-phased (TiCn-Al3Tim)/Al hybrid composites assisted ultrasonic vibration
- (2019) Qiang Li et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Influence of Si precipitates on fracture mechanisms of AlSi10Mg parts processed by Selective Laser Melting
- (2019) J. Delahaye et al. ACTA MATERIALIA
- Synergistic effects of Ce and Mg on the microstructure and tensile properties of Al-7Si-0.3Mg-0.2Fe alloy
- (2019) J. Kang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of ultrasonic melt treatment on intermetallic phase formation in a manganese-modified Al-17Si-2Fe alloy
- (2019) C.J. Todaro et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A new approach for improving the elevated-temperature strength and ductility of Al–Cu–Mg–Si alloys with minor amounts of dual-phased submicron/nanosized TiB2–TiC particles
- (2019) Yu-Yang Gao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Bulk ultrafine grained/nanocrystalline metals via slow cooling
- (2019) Chezheng Cao et al. Science Advances
- Microstructural evolution and mechanical properties of the AA2219/TiC nanocomposite manufactured by ultrasonic solidification
- (2019) Yilong Yang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Influence of a new AlTiC–B master alloy on the casting and extruding behaviors of 7050 alloys
- (2019) Kai Zhao et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Design of TiC nanoparticles and their morphology manipulating mechanisms by stoichiometric ratios: Experiment and first-principle calculation
- (2019) Bai-Xin Dong et al. MATERIALS & DESIGN
- Quantified contribution of β″ and β′ precipitates to the strengthening of an aged Al–Mg–Si alloy
- (2019) Mingjun Yang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Role of Mg2Si precipitates size in determining the ductility of A357 cast alloy
- (2019) Ghulam Asghar et al. MATERIALS & DESIGN
- Nanoparticle additions promote outstanding fracture toughness and fatigue strength in a cast Al–Cu alloy
- (2019) Chenglin Yang et al. MATERIALS & DESIGN
- Heat-treatment induced defect formation in α-Al matrix in Sr-modified eutectic Al–Si alloy
- (2018) Xiaorui Liu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Preparation of Al matrix nanocomposites by diluting the composite granules containing nano-SiCp under ultrasonic vibaration
- (2018) Shulin Lü et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Enhanced strength and ductility at room and elevated temperatures of Al-Cu alloy matrix composites reinforced with bimodal-sized TiC p compared with monomodal–sized TiC p
- (2018) Wei-Si Tian et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Processing and tensile properties of A356 composites containing in situ small-sized Al 3 Ti particulates
- (2018) Zhiwei Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Particle size effect on the interfacial properties of SiC particle-reinforced Al-Cu-Mg composites
- (2018) Xiaolei Guo et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Competitive Heterogeneous Nucleation Between Zr and MgO Particles in Commercial Purity Magnesium
- (2018) G. S. Peng et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effect of heat treatment on the microstructure and anisotropy in mechanical properties of A357 alloy produced by selective laser melting
- (2018) Kun V. Yang et al. MATERIALS & DESIGN
- Effect of post-process heat treatment on microstructure and properties of selective laser melted AlSi10Mg alloy
- (2018) Longchao Zhuo et al. MATERIALS LETTERS
- Enhancement in mechanical properties of selectively laser-melted AlSi10Mg aluminum alloys by T6-like heat treatment
- (2018) L.F. Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Fabrication, microstructure refinement and strengthening mechanisms of nanosized SiCP/Al composites assisted ultrasonic vibration
- (2018) Qiang Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Dynamic loading of direct metal laser sintered AlSi10Mg alloy: Strengthening behavior in different building directions
- (2018) Amir Hadadzadeh et al. MATERIALS & DESIGN
- Study of heat treatment parameters for additively manufactured AlSi10Mg in comparison with corresponding cast alloy
- (2018) Luca Girelli et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of as-cast and T6 treated Sc modified A356-5TiB2 in-situ composite
- (2018) S.L. Pramod et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Er addition to Al-Si-Mg-based casting alloy: Effects on microstructure, room and high temperature mechanical properties
- (2017) Marco Colombo et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Improvement of particles distribution of in-situ 5 vol% TiB 2 particulates reinforced Al-4.5Cu alloy matrix composites with ultrasonic vibration treatment
- (2017) Qi Gao et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Interactive effects of grain refinement, eutectic modification and solidification rate on tensile properties of Al-10Si alloy
- (2017) Martin Riestra et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Correlation of solidification microstructure refining scale, Mg composition and heat treatment conditions with mechanical properties in Al-7Si-Mg cast aluminum alloys
- (2017) Rui Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Synergistic effect of Sr and La on the microstructure and mechanical properties of A356.2 alloy
- (2017) Chuanrong Qiu et al. MATERIALS & DESIGN
- Microstructural correlated damage mechanisms of the high-cycle fatigued in-situ TiB 2 /Al-Cu-Mg composite
- (2017) Jiwei Geng et al. MATERIALS & DESIGN
- Influence of the degree of scandium supersaturation on the precipitation kinetics of rapidly solidified Al-Mg-Sc-Zr alloys
- (2016) J. Taendl et al. ACTA MATERIALIA
- Nanoparticle-inhibited growth of primary aluminum in Al–10Si alloys
- (2016) K. Wang et al. ACTA MATERIALIA
- Microstructure and mechanical properties of a bulk ultrafine grained Al–7Si–0.3Mg alloy produced by thermomechanical consolidation of a nanocrystalline powder
- (2016) J.M. Liang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructures and mechanical properties of A356 (AlSi7Mg0.3) aluminum alloy fabricated by selective laser melting
- (2016) Takahiro Kimura et al. MATERIALS & DESIGN
- Grain refining mechanism in the Al/Al–Ti–B system
- (2015) Z. Fan et al. ACTA MATERIALIA
- Effect of Eu addition on the microstructures and mechanical properties of A356 aluminum alloys
- (2015) Feng Mao et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The effect of scandium addition on microstructure and mechanical properties of Al–Si–Mg alloy: A multi-refinement modifier
- (2015) Cong Xu et al. MATERIALS CHARACTERIZATION
- Effects of erbium modification on the microstructure and mechanical properties of A356 aluminum alloys
- (2015) Z.M. Shi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The synergic effects of Sc and Zr on the microstructure and mechanical properties of Al–Si–Mg alloy
- (2015) Cong Xu et al. MATERIALS & DESIGN
- Effects of Sr on the microstructure and mechanical properties of in situ TiB2 reinforced A356 composite
- (2014) Tongmin Wang et al. MATERIALS & DESIGN
- Effects of rare earth elements addition on microstructures, tensile properties and fractography of A357 alloy
- (2014) Wenming Jiang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Analysis of strengthening in AA6111 during the early stages of aging: Atom probe tomography and yield stress modelling
- (2013) R.K.W. Marceau et al. ACTA MATERIALIA
- The effects of Mg amount on the microstructure and mechanical properties of Al–Si–Mg alloys
- (2013) Musa Yıldırım et al. MATERIALS & DESIGN
- The negative effect of solution treatment on the age hardening of A356 alloy
- (2013) H.C. Long et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Grain refinement of A356 alloy by Al–Ti–B–C master alloy and its effect on mechanical properties
- (2012) Pengting Li et al. MATERIALS & DESIGN
- Charged nanoparticles as supramolecular surfactants for controlling the growth and stability of microcrystals
- (2012) Bartlomiej Kowalczyk et al. NATURE MATERIALS
- Influence of the thermal route on the peak-aged microstructures in an Al–Mg–Si aluminum alloy
- (2012) S. Pogatscher et al. SCRIPTA MATERIALIA
- The Interdependence Theory: The relationship between grain formation and nucleant selection
- (2011) D.H. StJohn et al. ACTA MATERIALIA
- Mechanisms controlling the artificial aging of Al–Mg–Si Alloys
- (2011) S. Pogatscher et al. ACTA MATERIALIA
- Solute nanostructures and their strengthening effects in Al–7Si–0.6Mg alloy F357
- (2011) G. Sha et al. ACTA MATERIALIA
- Effects of yttrium and heat treatment on the microstructure and tensile properties of Al–7.5Si–0.5Mg alloy
- (2010) Bao Li et al. MATERIALS & DESIGN
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationFind the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
Search