Unprecedented enhancement in strength-plasticity synergy of (TiC+Al6MoTi+Mo)/Al cermet by multiple length-scale microstructure stimulated synergistic deformation

Interface formation and bonding control in high-volume-fraction (TiC+TiB2)/Al composites and their roles in enhancing properties

(2021) Hong-Yu Yang et al.   COMPOSITES PART B-ENGINEERING

Enhanced mechanical properties and corrosion resistance of 316L stainless steel by pre-forming a gradient nanostructured surface layer and annealing

(2021) Y.B. Lei et al.   ACTA MATERIALIA

Enhancing strength-ductility synergy and mechanisms of Al-based composites by size-tunable in-situ TiB2 particles with specific spatial distribution

(2021) Bai-Xin Dong et al.   COMPOSITES PART B-ENGINEERING

Simultaneously enhanced strength and toughness of cast medium carbon steels matrix composites by trace nano-sized TiC particles

(2021) Feng Qiu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

In-situ Al2O3-Al interface contribution towards the strength-ductility synergy of Al-CuO composite fabricated by solid-state reactive sintering

(2021) Xudong Rong et al.   SCRIPTA MATERIALIA

Role of trace nanoparticles in establishing fully optimized microstructure configuration of cold-rolled Al alloy

(2021) Tian-Shu Liu et al.   MATERIALS & DESIGN

Effects of Zr element on the microstructure and mechanical properties of B4C/Al composites fabricated by melt stirring method

(2021) Xizhou Kai et al.   COMPOSITES PART B-ENGINEERING

Fabrication, mechanical and thermal behaviors of antiperovskite manganese nitride Mn3.1Zn0.5Sn0.4N reinforced aluminum matrix composites

(2021) He Cao et al.   COMPOSITES PART B-ENGINEERING

Tensile and shear behavior of microscale growth layers between nacre in red abalone

(2020) Saleh Alghamdi et al.   JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS

Influence of matrix property and interfacial reaction on the mechanical performance and fracture mechanism of TiC reinforced Al matrix lamellar composites

(2020) Rui-Fen Guo et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Synthesis and characterization of in-situ (Al–Al3Ti–Al2O3)/Al dual matrix composite

(2020) Suprabha Lakra et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Strengthening mechanism and corrosion resistance of beta-type Ti-Nb-Zr-Mn alloys

(2020) S.F. Jawed et al.   Materials Science & Engineering C-Materials for Biological Applications

Single step fabrication by spray forming of large volume Al-based composites reinforced with quasicrystals

(2020) Witor Wolf et al.   SCRIPTA MATERIALIA

Simultaneously enhanced strength and ductility in a metastable β-Ti alloy by stress-induced hierarchical twin structure

(2020) Lei Ren et al.   SCRIPTA MATERIALIA

Selective laser melting of dispersed TiC particles strengthened 316L stainless steel

(2020) Wengang Zhai et al.   COMPOSITES PART B-ENGINEERING

Synthesis of damage-tolerant Cu-matrix composites with nacre-inspired laminate-reticular hierarchical architecture via tuning compositional wettability

(2020) Zhi-Jie Hu et al.   SCRIPTA MATERIALIA

Recent Development in Beta Titanium Alloys for Biomedical Applications

(2020) Liang-Yu Chen et al.   Metals

Achieving simultaneously improved tensile strength and ductility of a nano-TiB2/AlSi10Mg composite produced by cold spray additive manufacturing

(2020) Xinliang Xie et al.   COMPOSITES PART B-ENGINEERING

Stiff, strong and ductile heterostructured aluminum composites reinforced with oriented nanoplatelets

(2020) Jinfeng Nie et al.   SCRIPTA MATERIALIA

Effect of microstructure heterogeneity on the damage resistance of nacre-like alumina: Insights from image-based discrete simulations

(2020) Kaoutar Radi et al.   SCRIPTA MATERIALIA

Revealing the strengthening and toughening mechanisms of Al-CuO composite fabricated via in-situ solid-state reaction

(2020) Xudong Rong et al.   ACTA MATERIALIA

Deformation-induced ultrafine grains near fatigue crack tip and correlative fatigue damage in Al matrix composite

(2020) Jiwei Geng et al.   SCRIPTA MATERIALIA

Optimization of the properties in Al/SiC composites by tailoring microstructure through gelatin freeze casting

(2019) Ning Guo et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A novel approach to the fabrication of lamellar Al2O3/6061Al composites with high-volume fractions of hard phases

(2019) Yun-Liang Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructures and mechanical characterizations of high-performance nacre-inspired Al/Al2O3 composites

(2019) Meng-Qi Sun et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

A novel strategy for fabricating biomimetic gradient metal-ceramic composites by dynamic freeze casting and pressure infiltration

(2019) Li-Kai Yang et al.   SCRIPTA MATERIALIA

Design, fabrication and characterization of FeAl-based metallic-intermetallic laminate (MIL) composites

(2019) Haoren Wang et al.   ACTA MATERIALIA

The mechanical response of a α2(Ti3Al) + γ(TiAl)-submicron grained Al2O3 cermet under dynamic compression: modeling and experiment

(2019) B. Amirian et al.   ACTA MATERIALIA

Novel dynamic compressive and ballistic properties in 7075-T6 Al-matrix hybrid composite reinforced with SiC and B4C particulates

(2019) Min Chul Jo et al.   COMPOSITES PART B-ENGINEERING

The ternary Al–Mo–Ti system revisited: Phase equilibria of Al63(Mo,Ti)37

(2019) Mario J. Kriegel et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Simultaneously improved strength and toughness of in situ bi-phased TiB2–Ti(C,N)–Ni cermets by Mo addition

(2019) Hong-Yu Yang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Improved trade-off between strength and plasticity in titanium based metastable beta type Ti-Zr-Fe-Sn alloys

(2019) C.D. Rabadia et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Automated quantification of reinforcement dispersion in B4C/Al metal matrix composites

(2019) Byeongjin Park et al.   COMPOSITES PART B-ENGINEERING

Strength and toughness trade-off optimization of nacre-like ceramic composites

(2019) Kaoutar Radi et al.   COMPOSITES PART B-ENGINEERING

Fabrication of Al-matrix composite reinforced with quasicrystals using conventional metallurgical fabrication methods

(2019) Witor Wolf et al.   SCRIPTA MATERIALIA

Fracture behavior of heterogeneous nanostructured 316L austenitic stainless steel with nanotwin bundles

(2018) L. Xiong et al.   ACTA MATERIALIA

The superior elevated-temperature mechanical properties of Al-Cu-Mg-Si composites reinforced with in situ hybrid-sized TiC x -TiB 2 particles

(2018) Yu-Yang Gao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Deformation compatibility between nanotwinned and recrystallized grains enhances resistance to interface cracking in cyclic loaded stainless steel

(2018) Q. Li et al.   ACTA MATERIALIA

Effects of TiB2 content and alloy elements (Mg, Mo, V) on the compression properties of high-volume-fraction TiB2/Al composites

(2014) Long-Jiang Zhang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Strategies for Improving Tensile Ductility of Bulk Nanostructured Materials

(2010) Yonghao Zhao et al.   ADVANCED ENGINEERING MATERIALS

Effects of alloy elements (Mg, Zn, Sn) on the microstructures and compression properties of high-volume-fraction TiCx/Al composites

(2010) Shili Shu et al.   SCRIPTA MATERIALIA

Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale

(2009) K. Lu et al.   SCIENCE