Biodegradable Zn-Cu-Mn alloy with suitable mechanical performance and in vitro degradation behavior as a promising candidate for vascular stents

First-principles calculations of diffusion activation energies for designing anti-self-aging biodegradable zinc alloys

(2021) Shihao Fan et al.   JOURNAL OF MATERIALS RESEARCH

Realizing the combination of high strength and good ductility of Cu matrix composites with CrCoNi reinforcement particles and microlaminated structure

(2021) Jiawei Wu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Characterization of nano precipitate phase in an as-extruded Zn-Cu alloy

(2021) Jimiao Jiang et al.   SCRIPTA MATERIALIA

Alloying design strategy for biodegradable zinc alloys based on first-principles study of solid solution strengthening

(2021) Chun Chen et al.   MATERIALS & DESIGN

Towards revealing key factors in mechanical instability of bioabsorbable Zn-based alloys for intended vascular stenting

(2020) Ehsan Mostaed et al.   Acta Biomaterialia

Alloying design of biodegradable zinc as promising bone implants for load-bearing applications

(2020) Hongtao Yang et al.   Nature Communications

Biodegradable Zn–3Cu and Zn–3Cu–0.2Ti alloys with ultrahigh ductility and antibacterial ability for orthopedic applications

(2020) Jixing Lin et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

In vitro cytocompatibility, hemocompatibility and antibacterial properties of biodegradable Zn-Cu-Fe alloys for cardiovascular stents applications

(2020) Rui Yue et al.   Materials Science & Engineering C-Materials for Biological Applications

Ultrafine- and uniform-grained biodegradable Zn-0.5Mn alloy: Grain refinement mechanism, corrosion behavior, and biocompatibility in vivo

(2020) Pushan Guo et al.   Materials Science & Engineering C-Materials for Biological Applications

Structural and mechanical aspects of hypoeutectic Zn–Mg binary alloys for biodegradable vascular stent applications

(2020) W. Pachla et al.   Bioactive Materials

The Influence of Alloying and Fabrication Techniques on the Mechanical Properties, Biodegradability and Biocompatibility of Zinc: A Comprehensive Review

(2019) J. Venezuela et al.   Acta Biomaterialia

Challenges in the use of zinc and its alloys as biodegradable metals: Perspective from biomechanical compatibility

(2019) Guannan Li et al.   Acta Biomaterialia

Current status and perspectives of zinc-based absorbable alloys for biomedical applications

(2019) David Hernández-Escobar et al.   Acta Biomaterialia

High-performance hot-warm rolled Zn-0.8Li alloy with nano-sized metastable precipitates and sub-micron grains for biodegradable stents

(2019) Zhen Li et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Effects of Ag, Cu or Ca addition on microstructure and comprehensive properties of biodegradable Zn-0.8Mn alloy

(2019) Zhang-Zhi Shi et al.   Materials Science & Engineering C-Materials for Biological Applications

Investigation on the microstructure, mechanical properties, in vitro degradation behavior and biocompatibility of newly developed Zn-0.8%Li-(Mg, Ag) alloys for guided bone regeneration

(2019) Yu Zhang et al.   Materials Science & Engineering C-Materials for Biological Applications

Long-term in vivo study of biodegradable Zn-Cu stent: A 2-year implantation evaluation in porcine coronary artery

(2019) Chao Zhou et al.   Acta Biomaterialia

⟨c + a⟩ dislocations shearing (0001)α plate precipitates in an Mg-Zn-Mn alloy

(2019) Jimiao Jiang et al.   SCRIPTA MATERIALIA

In vivo and in vitro evaluation of a biodegradable magnesium vascular stent designed by shape optimization strategy

(2019) Chenxin Chen et al.   BIOMATERIALS

Hemocompatibility of biodegradable Zn-0.8 wt% (Cu, Mn, Li) alloys

(2019) Yu-Xia Yin et al.   Materials Science & Engineering C-Materials for Biological Applications

Microstructure and mechanical properties of extruded and caliber rolled biodegradable Zn-0.8Mn-0.4Ag alloy with high ductility

(2019) Hong-Ting Chen et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The effects of alloying with Cu and Mn and thermal treatments on the mechanical instability of Zn-0.05Mg alloy

(2019) Morteza S. Ardakani et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Zinc-based alloys for degradable vascular stent applications

(2018) Ehsan Mostaed et al.   Acta Biomaterialia

Indirectly extruded biodegradable Zn-0.05wt%Mg alloy with improved strength and ductility: In vitro and in vivo studies

(2018) Chi Xiao et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Fabrication and characterization of novel biodegradable Zn-Mn-Cu alloys

(2018) Zhang-Zhi Shi et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Twinning in MnZn 13 intermetallic compound with base-centered monoclinic structure in Zn-0.75Mn alloy

(2018) Zhang-Zhi Shi et al.   MATERIALS CHARACTERIZATION

Novel high-strength, low-alloys Zn-Mg (< 0.1 wt% Mg) and their arterial biodegradation

(2018) Hualan Jin et al.   Materials Science & Engineering C-Materials for Biological Applications

The double-edge effect of second-phase particles on the recrystallization behaviour and associated mechanical properties of metallic materials

(2018) Ke Huang et al.   PROGRESS IN MATERIALS SCIENCE

Microalloyed Zn-Mn alloys: From extremely brittle to extraordinarily ductile at room temperature

(2018) Zhang-Zhi Shi et al.   MATERIALS & DESIGN

Fully bioresorbable vascular scaffolds: lessons learned and future directions

(2018) Hiroyuki Jinnouchi et al.   Nature Reviews Cardiology

Potential biodegradable Zn-Cu binary alloys developed for cardiovascular implant applications

(2017) Zibo Tang et al.   Journal of the Mechanical Behavior of Biomedical Materials

Fabrication, mechanical properties and in vitro degradation behavior of newly developed Zn Ag alloys for degradable implant applications

(2017) M. Sikora-Jasinska et al.   Materials Science & Engineering C-Materials for Biological Applications

Research on a Zn-Cu alloy as a biodegradable material for potential vascular stents application

(2016) Jialin Niu et al.   Materials Science & Engineering C-Materials for Biological Applications

Bioabsorbable zinc ion induced biphasic cellular responses in vascular smooth muscle cells

(2016) Jun Ma et al.   Scientific Reports

Biodegradable Metals for Cardiovascular Stents: from Clinical Concerns to Recent Zn-Alloys

(2016) Patrick K. Bowen et al.   Advanced Healthcare Materials

Recommendation for modifying current cytotoxicity testing standards for biodegradable magnesium-based materials

(2015) Jiali Wang et al.   Acta Biomaterialia

Endothelial Cellular Responses to Biodegradable Metal Zinc

(2015) Jun Ma et al.   ACS Biomaterials-Science & Engineering

Endothelial Cellular Responses to Biodegradable Metal Zinc

(2015) Jun Ma et al.   ACS Biomaterials Science & Engineering

Triggering rare earth texture modification in magnesium alloys by addition of zinc and zirconium

(2014) I. Basu et al.   ACTA MATERIALIA

Zinc Exhibits Ideal Physiological Corrosion Behavior for Bioabsorbable Stents

(2013) Patrick K. Bowen et al.   ADVANCED MATERIALS

Mechanical and corrosion properties of newly developed biodegradable Zn-based alloys for bone fixation

(2011) D. Vojtěch et al.   Acta Biomaterialia