Insight of high-entropy alloy particles-reinforced 2219 Al matrix composites via the ultrasonic casting technology
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Insight of high-entropy alloy particles-reinforced 2219 Al matrix composites via the ultrasonic casting technology
Authors
Keywords
High entropy alloy particles, 2219 Al alloy, Ultrasonic, Strengthening effect, Mechanical properties, Strengthening model
Journal
MATERIALS CHARACTERIZATION
Volume 182, Issue -, Pages 111548
Publisher
Elsevier BV
Online
2021-10-26
DOI
10.1016/j.matchar.2021.111548
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Role of ultrasonic treatment on microstructure, mechanical and tribological behavior of 2D boron nitride reinforced aluminum composites
- (2021) Tanaji Paul et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure evolution and nano-phases strengthening of Al-5%Cu alloy by adding trace AlSiTiCrNiCu high entropy alloy
- (2021) Qinglin Li et al. MATERIALS CHARACTERIZATION
- Size Control of In Situ Synthesized TiB2 Particles in Molten Aluminum
- (2021) Jie Yuan et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Hot Deformation Behavior and Microstructure Mechanisms of As-Cast 2219 Al Alloy
- (2020) Yun Zhang et al. JOM
- AlCoCrFeNi high-entropy alloy particle reinforced 5083Al matrix composites with fine grain structure fabricated by submerged friction stir processing
- (2020) Xiao Yang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure and mechanical properties of SiCnp/Al6082 aluminum matrix composites prepared by squeeze casting combined with stir casting
- (2020) Junwen Zhu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effects of AlCoCrFeNiTi high-entropy alloy on microstructure and mechanical properties of pure aluminum
- (2020) Qinglin Li et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Ceramic waste SiC particle-reinforced Al matrix composite brake materials with a high friction coefficient
- (2020) K.L. Zheng et al. WEAR
- Tuning the microstructure morphology and genetic mechanical properties of 2219 Al alloy with ultrasonic treatment
- (2020) Yun Zhang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Strengthening of the mechanical and tribological properties of composite oxide film formed on aluminum alloy with the addition of graphite
- (2020) Syazwani Mohamad et al. SURFACE & COATINGS TECHNOLOGY
- Analysis of precipitation, dissolution and incipient melting of Al2Cu in B206 Al alloy using in-situ neutron diffraction
- (2019) A. Lombardi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Advanced Metal Matrix Nanocomposites
- (2019) Massoud Malaki et al. Metals
- A Comparative Study on the Effect of Four-Source Ultrasonic Power on the Microstructure and Mechanical Properties of Large-Scale 2219 Aluminum Ingots
- (2019) Li Zhang et al. JOM
- Microstructural evolution of Al2Cu phase and mechanical properties of the large-scale Al alloy components under different consecutive manufacturing processes
- (2019) Yun Zhang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A novel modifier on the microstructure and mechanical properties of Al-7Si alloys
- (2019) Qinglin Li et al. MATERIALS LETTERS
- Effects of high-intensity ultrasound on the microstructures and mechanical properties of ultra-large 2219 Al alloy ingot
- (2019) Li Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural evolution and mechanical properties of the AA2219/TiC nanocomposite manufactured by ultrasonic solidification
- (2019) Yilong Yang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Superior tensile properties of Al0.3CoCrFeNi high entropy alloys with B2 precipitated phases at room and cryogenic temperatures
- (2019) Q. Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure evolution and strengthening mechanisms in friction-stir welded Al–Mg–Sc alloy
- (2019) I. Vysotskiy et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Manufacturing Methods, Microstructural and Mechanical Properties Evolutions of High-Entropy Alloys: A Review
- (2019) Yaser A. Alshataif et al. METALS AND MATERIALS INTERNATIONAL
- Interface microstructure evolution and mechanical properties of the extruded fiber-reinforced aluminum-based composite bar
- (2019) Mingfu Liu et al. MATERIALS & DESIGN
- Strengthening mechanisms in ultrasonically processed aluminium matrix composite with in-situ Al 3 Ti by salt addition
- (2018) Rahul Gupta et al. COMPOSITES PART B-ENGINEERING
- On the preparation and mechanical properties of in situ small-sized TiB 2 /Al-4.5Cu composites via ultrasound assisted RD method
- (2018) Jun Liu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of particle shape and size distribution on the dissolution behavior of Al 2 Cu particles during homogenization in aluminum casting alloy Al-Si-Cu-Mg
- (2018) Ida Sadeghi et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Preparation of Al matrix nanocomposites by diluting the composite granules containing nano-SiCp under ultrasonic vibaration
- (2018) Shulin Lü et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Effects of pre-deformation on the microstructures and corrosion behavior of 2219 aluminum alloys
- (2018) Yalin Lu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A Physically Based Constitutive Model and Continuous Dynamic Recrystallization Behavior Analysis of 2219 Aluminum Alloy during Hot Deformation Process
- (2018) Lei Liu et al. Materials
- A novel Fe40Mn40Cr10Co10/SiC medium-entropy nanocomposite reinforced by the nanoparticles-woven architectural structures
- (2018) Jianying Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Possible Effects and Mechanisms of Ultrasonic Cavitation on Oxide Inclusions during Direct-Chill Casting of an Al Alloy
- (2018) Yun Zhang et al. Metals
- Formation of transition layer and its effect on mechanical properties of AlCoCrFeNi high-entropy alloy/Al composites
- (2018) Yunzi Liu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- 3D printing of high-strength aluminium alloys
- (2017) John H. Martin et al. NATURE
- In situ observation of ultrasonic cavitation-induced fragmentation of the primary crystals formed in Al alloys
- (2017) Feng Wang et al. ULTRASONICS SONOCHEMISTRY
- On the Mechanism of Ultrasound-Driven Deagglomeration of Nanoparticle Agglomerates in Aluminum Melt
- (2016) Olga Kudryashova et al. JOM
- Strengthening in Al alloy nano composites fabricated by ultrasound assisted solidification technique
- (2016) Neeraj Srivastava et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- High-entropy alloy particle reinforced Al-based amorphous alloy composite with ultrahigh strength prepared by spark plasma sintering
- (2016) Zhen Tan et al. MATERIALS & DESIGN
- Development of TiB2 reinforced aluminum foundry alloy based in situ composites – Part II: Enhancing the practical aluminum foundry alloys using the improved Al–5wt%TiB2 master composite upon dilution
- (2014) Tongmin Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of rare earth elements addition on microstructures, tensile properties and fractography of A357 alloy
- (2014) Wenming Jiang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Structural and mechanical properties of Ni60Nb40 amorphous alloy particle reinforced Al-based composites produced by microwave-assisted rapid sintering
- (2013) S. Jayalakshmi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Solute strengthening from first principles and application to aluminum alloys
- (2012) G.P.M. Leyson et al. ACTA MATERIALIA
- Effect of Nb addition on the microstructure and properties of AlCoCrFeNi high-entropy alloy
- (2011) S.G. Ma et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Strengthening mechanisms in particulate Al/B4C composites produced by repeated roll bonding process
- (2010) Morteza Alizadeh JOURNAL OF ALLOYS AND COMPOUNDS
- Fabrication of nanostructure Al/SiCP composite by accumulative roll-bonding (ARB) process
- (2009) M. Alizadeh et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Strengthening mechanisms in an Al–Mg alloy
- (2009) E.L. Huskins et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure, thermophysical and electrical properties in AlxCoCrFeNi (0≤x≤2) high-entropy alloys
- (2009) Hsuan-Ping Chou et al. Materials Science and Engineering B-Advanced Functional Solid-State Materials
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExplorePublish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn More