Developing a sustainable concrete incorporating bentonite clay and silica fume: Mechanical and durability performance

Prediction of Catenary Action Capacity of RC Beam-Column Substructures under a Missing Column Scenario Using Evolutionary Algorithm

(2021) Iftikhar Azim et al.   KSCE Journal of Civil Engineering

Effect of pozzolan slurries on recycled aggregate concrete: Mechanical and durability performance

(2021) Wafaa Mohamed Shaban et al.   CONSTRUCTION AND BUILDING MATERIALS

Influence of silica fume, metakaolin & SBR latex on strength and durability performance of pervious concrete

(2021) Hassan Bilal et al.   CONSTRUCTION AND BUILDING MATERIALS

An experimental and numerical investigation of coarse aggregate settlement in fresh concrete under vibration

(2021) Yuxin Cai et al.   CEMENT & CONCRETE COMPOSITES

Effect of pumice powder and nano-clay on the strength and permeability of fiber-reinforced pervious concrete incorporating recycled concrete aggregate

(2021) Peyman Mehrabi et al.   CONSTRUCTION AND BUILDING MATERIALS

Sustainable utilization of foundry waste: Forecasting mechanical properties of foundry sand based concrete using multi-expression programming

(2021) Muhammad Farjad Iqbal et al.   SCIENCE OF THE TOTAL ENVIRONMENT

Assessment of performance of metabentonite and metazeolite-based geopolymers with fly ash sand replacement

(2021) Yurdakul Aygörmez   CONSTRUCTION AND BUILDING MATERIALS

Chloride penetration in freeze–thaw induced cracking concrete: A numerical study

(2021) Lin-jie Li et al.   CONSTRUCTION AND BUILDING MATERIALS

Evaluation of the effects of silica fume and air-entrainment on deicer salt scaling resistance of concrete pavements: Microstructural study and modeling

(2021) Mojtaba Nili et al.   CONSTRUCTION AND BUILDING MATERIALS

Electrochemical deposition method for load-induced crack repair of reinforced concrete structures: A numerical study

(2021) Zhaozheng Meng et al.   ENGINEERING STRUCTURES

On the hygrothermal behavior of concrete containing glass powder and silica fume

(2021) Fouad Boukhelf et al.   Journal of Cleaner Production

Influence of silica fume on mechanical and durability of pervious concrete

(2020) Goran Adil et al.   CONSTRUCTION AND BUILDING MATERIALS

Evaluating the use of recycled concrete aggregate and pozzolanic additives in fiber-reinforced pervious concrete with industrial and recycled fibers

(2020) Ali Toghroli et al.   CONSTRUCTION AND BUILDING MATERIALS

Biochar as green additives in cement-based composites with carbon dioxide curing

(2020) Lei Wang et al.   JOURNAL OF CLEANER PRODUCTION

Influence of different fibers on mechanical and durability performance of concrete with silica fume

(2020) Babar Ali et al.   Structural Concrete

Prediction model for compressive arch action capacity of RC frame structures under column removal scenario using gene expression programming

(2020) Iftikhar Azim et al.   Structures

Comparative performance of different bacteria immobilized in natural fibers for self-healing in concrete

(2020) Momina Rauf et al.   CONSTRUCTION AND BUILDING MATERIALS

Semi-analytical model for compressive arch action capacity of RC frame structures

(2020) Iftikhar Azim et al.   Structures

Prediction of chloride diffusivity in concrete using artificial neural network: Modelling and performance evaluation

(2020) Qing-feng Liu et al.   CONSTRUCTION AND BUILDING MATERIALS

Alkali-activated slag (AAS) paste: Correlation between durability and microstructural characteristics

(2020) Mahdi Shariati et al.   CONSTRUCTION AND BUILDING MATERIALS

Improving construction and demolition waste collection service in an urban area using a simheuristic approach: A case study in Sydney, Australia

(2020) Maziar Yazdani et al.   JOURNAL OF CLEANER PRODUCTION

Utilizing recycled aggregate concrete in sustainable construction for a required compressive strength ratio

(2020) Renjie Mi et al.   JOURNAL OF CLEANER PRODUCTION

Study on the Permeability of Modified Bentonite Slurry in Landfill

(2020) Zenan Zhang et al.   Advances in Materials Science and Engineering

Chloride ion permeability improvement of recycled aggregate concrete using pretreated recycled aggregates by silica fume slurry

(2020) Hossein Sasanipour et al.   CONSTRUCTION AND BUILDING MATERIALS

Shear behavior of RC beams made with plastic and steel wires: Experimental and numerical study

(2020) Yasmin Murad et al.   Case Studies in Construction Materials

Recycled ceramic waste high strength concrete containing wollastonite particles and micro-silica: A comprehensive experimental study

(2019) Seyed Alireza Zareei et al.   CONSTRUCTION AND BUILDING MATERIALS

Influence of nano-clay on rheology, fresh properties, heat of hydration and strength of cement-based mortars

(2019) Ines Dejaeghere et al.   CONSTRUCTION AND BUILDING MATERIALS

Mitigating alkali-silica reaction induced concrete degradation through cement substitution by metakaolin and bentonite

(2019) Jianqiang Wei et al.   APPLIED CLAY SCIENCE

Experimental investigation of modified bentonite clay-crumb rubber concrete

(2019) Adeyemi Oluwaseun Adeboje et al.   CONSTRUCTION AND BUILDING MATERIALS

Predicting the compressive strength of normal and High-Performance Concretes using ANN and ANFIS hybridized with Grey Wolf Optimizer

(2019) Emadaldin Mohammadi Golafshani et al.   CONSTRUCTION AND BUILDING MATERIALS

Mechanical and durability performance of recycled aggregate concrete incorporating low calcium bentonite

(2019) Bilal Masood et al.   CONSTRUCTION AND BUILDING MATERIALS

Prediction of mechanical properties of green concrete incorporating waste foundry sand based on gene expression programming

(2019) Muhammad Farjad Iqbal et al.   JOURNAL OF HAZARDOUS MATERIALS

Self-compacting mortars produced with fine fraction of calcined waste foundry sand (WFS) as alternative filler: Fresh-state, hydration and hardened-state properties

(2019) Paulo R. de Matos et al.   JOURNAL OF CLEANER PRODUCTION

Improved interfacial strength of SiO 2 coated carbon fiber in cement matrix

(2018) Mengyuan Lu et al.   CEMENT & CONCRETE COMPOSITES

Low-carbon and low-alkalinity stabilization/solidification of high-Pb contaminated soil

(2018) Lei Wang et al.   CHEMICAL ENGINEERING JOURNAL

Ionic transport features in concrete composites containing various shaped aggregates: a numerical study

(2018) Qing-feng Liu et al.   COMPOSITE STRUCTURES

Green quaternary concrete composites: Characterization and evaluation of the mechanical properties

(2018) Niragi Dave et al.   Structural Concrete

High-strength concrete based on ternary binder with high pozzolan content

(2018) Eva Vejmelková et al.   Structural Concrete

Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing

(2018) Biranchi Panda et al.   CEMENT & CONCRETE COMPOSITES

Multi-phase modelling of electrochemical rehabilitation for ASR and chloride affected concrete composites

(2018) Li-xuan Mao et al.   COMPOSITE STRUCTURES

The potential usage of waste foundry sand from investment casting in refractory industry

(2018) Ruofei Xiang et al.   JOURNAL OF CLEANER PRODUCTION

Effect of a calcined Westerwald bentonite as supplementary cementitious material on the long-term performance of concrete

(2018) A. Trümer et al.   APPLIED CLAY SCIENCE

Performance and properties of mortar mixed with nano-CuO and rice husk ash

(2016) Bahareh Mehdizadeh Miyandehi et al.   CEMENT & CONCRETE COMPOSITES

Compression response of normal and high strength pervious concrete

(2016) Rui Zhong et al.   CONSTRUCTION AND BUILDING MATERIALS

Incentive effect of bentonite and concrete admixtures on stabilization/solidification for heavy metal-polluted sediments of Xiangjiang River

(2016) Ming Yan et al.   ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH

Development of high-performance heavy density concrete using different aggregates for gamma-ray shielding

(2015) Ahmed S. Ouda   PROGRESS IN NUCLEAR ENERGY

Influence of Ultrafine 2CaO·SiO2 Powder on Hydration Properties of Reactive Powder Concrete

(2015) Hongfang Sun et al.   Materials

Geopolymer foam concrete: An emerging material for sustainable construction

(2014) Zuhua Zhang et al.   CONSTRUCTION AND BUILDING MATERIALS

Understanding the Filler Effect on the Nucleation and Growth of C-S-H

(2014) E. Berodier et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

Experimental assessment of angle shear connectors under monotonic and fully reversed cyclic loading in high strength concrete

(2013) Ali Shariati et al.   CONSTRUCTION AND BUILDING MATERIALS

An experimental study on the failure modes of high strength concrete beams with particular references to variation of the tensile reinforcement ratio

(2013) Mohammad Mohammadhassani et al.   ENGINEERING FAILURE ANALYSIS

Utilization of Pakistani bentonite as partial replacement of cement in concrete

(2011) Shazim Ali Memon et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of waste foundry sand (WFS) as partial replacement of sand on the strength, ultrasonic pulse velocity and permeability of concrete

(2011) Gurpreet Singh et al.   CONSTRUCTION AND BUILDING MATERIALS

Pakistani bentonite in mortars and concrete as low cost construction material

(2009) J. Mirza et al.   APPLIED CLAY SCIENCE

Physico-chemical, morphological and thermal analysis for the combined pozzolanic activities of minerals additives

(2009) M. Ashraf et al.   CONSTRUCTION AND BUILDING MATERIALS

Nondestructive evaluation of damaged concrete using nonlinear ultrasonics

(2008) Abid A. Shah et al.   MATERIALS & DESIGN