Engineering of strong and hard in-situ Al-Al3Ti nanocomposite via high-energy ball milling and spark plasma sintering

Core/multi-shell particles based on TiH2, a high-performance thermally activated foaming agent

(2020) M. Romero-Romero et al.   MATERIALS CHEMISTRY AND PHYSICS

Friction stir processing of Al3Ni intermetallic particulate reinforced cast aluminum matrix composites: Microstructure and tensile properties

(2020) M. Balakrishnan et al.   Journal of Materials Research and Technology-JMR&T

A novel method to enhance the performance of an ex-situ Al/Si-YSZ metal matrix composite

(2020) Hamidreza Ghandvar et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Comprehensive structural and mechanical characterization of in-situ Al–Al3Ti nanocomposite modified by heat treatment

(2020) Mohammadreza Tamizi Junqani et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

DFT – Driven design of hierarchically structured, strong and highly conductive alloys in Cu–Ti system via in situ hydration - re-oxidation

(2020) S. Vorotilo et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of single wall carbon nanotubes on strength properties of aluminum composite produced by spark plasma sintering and extrusion

(2020) Artjom V. Alekseev et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Manufacturing of Conductive, Wear-Resistant Nanoreinforced Cu-Ti Alloys Using Partially Oxidized Electrolytic Copper Powder

(2020) Stepan Vorotilo et al.   Nanomaterials

A critical examination of compound stability predictions from machine-learned formation energies

(2020) Christopher J. Bartel et al.   npj Computational Materials

Influence of Ti and TiH2 Additives on the Structure and Properties of Copper Alloys for Diamond Cutting Tools

(2020) P. A. Loginov et al.   Russian Journal of Non-Ferrous Metals

Using Different Powdered Carbon Forms for Reinforcing Aluminum Composite Materials with Carbon and Titanium Carbide: A Review

(2020) A. P. Amosov et al.   Russian Journal of Non-Ferrous Metals

Development of Ti–Nb and Ti–Nb–Fe beta alloys from TiH2 powders

(2019) C. Chirico et al.   POWDER METALLURGY

Mechanical properties and microstructure of Al/(TiC+TiB2) composite fabricated by spark plasma sintering

(2019) M. Hadian et al.   CERAMICS INTERNATIONAL

Mechanical properties and fracture of in-situ Al3Ti particulate reinforced A356 composites

(2019) Siming Ma et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Mechanical activation of heterogeneous exothermic reactions in powder mixtures

(2019) A S Rogachev   RUSSIAN CHEMICAL REVIEWS

Microstructure development, tribological property and underlying mechanism of laser additive manufactured submicro-TiB2 reinforced Al-based composites

(2019) Lixia Xi et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of the process parameters in the additive manufacturing of in situ Al/AlN samples

(2019) A. Riquelme et al.   Journal of Manufacturing Processes

Aluminum matrix composites reinforced with metallic glass particles with core-shell structure

(2019) H.D. Guan et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Exploring the size effects of Al 4 C 3 on the mechanical properties and thermal behaviors of Al-based composites reinforced by SiC and carbon nanotubes

(2018) Baisong Guo et al.   CARBON

Strengthening mechanisms in ultrasonically processed aluminium matrix composite with in-situ Al 3 Ti by salt addition

(2018) Rahul Gupta et al.   COMPOSITES PART B-ENGINEERING

Particle-Reinforced Aluminum Matrix Composites (AMCs)—Selected Results of an Integrated Technology, User, and Market Analysis and Forecast

(2018) Anja Schmidt et al.   Metals

Al-based composites reinforced with AlB 2 , AlN and BN phases: Experimental and theoretical studies

(2018) Alexander E. Steinman et al.   MATERIALS & DESIGN

AFLOW-CHULL: Cloud-Oriented Platform for Autonomous Phase Stability Analysis

(2018) Corey Oses et al.   Journal of Chemical Information and Modeling

Nanoengineering of metallic alloys for machining tools: Multiscale computational and in situ TEM investigation of mechanisms

(2018) S. Vorotilo et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Nucleation and growth of TiAl3 intermetallic phase in diffusion bonded Ti/Al Metal Intermetallic Laminate

(2018) N. Thiyaneshwaran et al.   Scientific Reports

Effect of initial Ti powders size on the microstructures and mechanical properties of Al 3 Ti/2024 Al composites prepared by ultrasonic assisted in-situ casting

(2017) Gang Chen et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Evolution of microstructure and mechanical properties of Al-5 wt% Ti composite fabricated by P/M and hot extrusion: Effect of heat treatment

(2017) Alireza Rezaei et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

High-strength aluminum-based composites reinforced with BN, AlB2 and AlN particles fabricated via reactive spark plasma sintering of Al-BN powder mixtures

(2017) K.L. Firestein et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Super-strong materials for temperatures exceeding 2000 °C

(2017) Laura Silvestroni et al.   Scientific Reports

Study on the mechanical and drilling properties of AA7039 composites reinforced with Al2O3/B4C/SiC particles

(2016) Şener Karabulut et al.   COMPOSITES PART B-ENGINEERING

Influence of high-energy ball milling on electrical resistance of Cu and Cu/Cr nanocomposite materials produced by Spark Plasma Sintering

(2016) A.S. Rogachev et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Fabrication of high strength in-situ Al-Al3Ti nanocomposite by mechanical alloying and hot extrusion: Investigation of fracture toughness

(2016) E. Basiri Tochaee et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Spark Plasma Sintering of Titanium Spherical Particles

(2016) Mohammad Abedi et al.   METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE

Compressive, shear, and fracture behavior of CNT reinforced Al matrix composites manufactured by severe plastic deformation

(2016) Hassan Zare et al.   MATERIALS & DESIGN

The thermodynamic scale of inorganic crystalline metastability

(2016) W. Sun et al.   Science Advances

Microstructural and Mechanical Properties of Al-Based Composites Reinforced with In-Situ and Ex-Situ Al2O3Nanoparticles

(2015) Riccardo Casati et al.   ADVANCED ENGINEERING MATERIALS

Interface Stability in Solid-State Batteries

(2015) William D. Richards et al.   CHEMISTRY OF MATERIALS

The Materials Application Programming Interface (API): A simple, flexible and efficient API for materials data based on REpresentational State Transfer (REST) principles

(2015) Shyue Ping Ong et al.   COMPUTATIONAL MATERIALS SCIENCE

Phase transformations of titanium hydride in thermal desorption process with different heating rates

(2015) Mingwang Ma et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Formation of in-situ Al 3 Ti particles from globular Ti powders and Al alloy melt under ultrasonic vibration

(2015) Jin Qin et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Aluminium reinforced by WC and TiC nanoparticles (ex-situ) and aluminide particles (in-situ): Microstructure, wear and corrosion behaviour

(2015) A. Lekatou et al.   MATERIALS & DESIGN

Metal Matrix Composites Reinforced by Nano-Particles—A Review

(2014) Riccardo Casati et al.   Metals

Effects of particle/matrix interface and strengthening mechanisms on the mechanical properties of metal matrix composites

(2013) Guoqing Wu et al.   COMPOSITE INTERFACES

Reactive Spark Plasma Sintering: Successes and Challenges of Nanomaterial Synthesis

(2013) Dina V. Dudina et al.   Journal of Nanomaterials

In situ formed core–shell structured particle reinforced aluminum matrix composites

(2013) Yuchuan Wang et al.   MATERIALS & DESIGN

Diffusion mechanisms of vacancy and doped Si in Al3Ti from first-principles calculations

(2011) Guoliang Zhu et al.   INTERMETALLICS

Finding Nature’s Missing Ternary Oxide Compounds Using Machine Learning and Density Functional Theory

(2010) Geoffroy Hautier et al.   CHEMISTRY OF MATERIALS

Thermal stabilities of delithiated olivine MPO4 (M=Fe, Mn) cathodes investigated using first principles calculations

(2010) Shyue Ping Ong et al.   ELECTROCHEMISTRY COMMUNICATIONS

Influence of Mechanical Activation on Decomposition of Titanium Hydride

(2010) K. G. Prashanth   MATERIALS AND MANUFACTURING PROCESSES

Effect of process control agent on the porous structure and mechanical properties of a biomedical Ti–Sn–Nb alloy produced by powder metallurgy

(2009) A. Nouri et al.   Acta Biomaterialia

The effect of particle size, sintering temperature and sintering time on the properties of Al–Al2O3 composites, made by powder metallurgy

(2009) Mehdi Rahimian et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

First-principles study of vacancy formation and migration in clean and Re-doped γ′-Ni3Al

(2008) Xu Zhang et al.   ACTA MATERIALIA

Li−Fe−P−O2 Phase Diagram from First Principles Calculations

(2008) Shyue Ping Ong et al.   CHEMISTRY OF MATERIALS