Recent applications and developments of Polyurethane materials in pavement engineering

Study on a thermosetting polyurethane modified asphalt suitable for bridge deck pavements: Formula and properties

(2020) Zengping Zhang et al.   CONSTRUCTION AND BUILDING MATERIALS

The energy consumption and emission of polyurethane pavement construction based on life cycle assessment

(2020) Lin Cong et al.   JOURNAL OF CLEANER PRODUCTION

Characterizing Compatibility of Crumb Rubber Modified Asphalt by Customized Drainage Method

(2020) Jin Li et al.   JOURNAL OF TESTING AND EVALUATION

Effect of a lignin-based polyurethane on adhesion properties of asphalt binder during UV aging process

(2020) Chao Peng et al.   CONSTRUCTION AND BUILDING MATERIALS

Dynamic Response of Fully Permeable Pavements: Development of Pore Pressures under Different Modes of Loading

(2020) Guoyang Lu et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

Investigation of the Hydraulic Properties of Pervious Pavement Mixtures: Characterization of Darcy and Non-Darcy Flow Based on Pore Microstructures

(2020) Guoyang Lu et al.   Journal of Transportation Engineering Part B-Pavements

Rheology-morphology relationships of new polymer-modified bitumen based on thermoplastic polyurethanes (TPU)

(2020) Raïssa Gallu et al.   CONSTRUCTION AND BUILDING MATERIALS

Experimental investigation on the development of pore clogging in novel porous pavement based on polyurethane

(2020) Shifa Xu et al.   CONSTRUCTION AND BUILDING MATERIALS

Low-Noise pavement technologies and evaluation techniques: a literature review

(2020) Peter Mikhailenko et al.   International Journal of Pavement Engineering

In-situ and numerical investigation on the dynamic response of unbounded granular material in permeable pavement

(2020) Guoyang Lu et al.   Transportation Geotechnics

Polyurethane Grout Injection as Remedial Measure to Reduce Differential Heave in Pavement Sections Constructed over Expansive Soils

(2020) Md. Fazle Rabbi et al.   Journal of Transportation Engineering Part B-Pavements

Effects of Polyurethane Thermoplastic Elastomer on Properties of Asphalt Binder and Asphalt Mixture

(2020) Zengping Zhang et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

Experimental study on the polyurethane-bound pervious mixtures in the application of permeable pavements

(2019) Guoyang Lu et al.   CONSTRUCTION AND BUILDING MATERIALS

Improving the performance of RET modified asphalt with the addition of polyurethane prepolymer (PUP)

(2019) Cheng Xu et al.   CONSTRUCTION AND BUILDING MATERIALS

Development of a sustainable pervious pavement material using recycled ceramic aggregate and bio-based polyurethane binder

(2019) Guoyang Lu et al.   JOURNAL OF CLEANER PRODUCTION

Investigation of modified bitumen’s rheological properties with synthesized polyurethane by MDI-PPG reactive prepolymers

(2019) Saeid Hesami et al.   JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS

Hydraulic properties of polyurethane-bound permeable pavement materials considering unsaturated flow

(2019) T. Törzs et al.   CONSTRUCTION AND BUILDING MATERIALS

Evaluation of the cyclic fatigue performance of polyurethane foam in different density and category

(2019) Samet Demirel et al.   POLYMER TESTING

Sustainable Green Pavement Using Bio-Based Polyurethane Binder in Tunnel

(2019) Chao Leng et al.   Materials

Laboratory evaluation on comprehensive performance of polyurethane rubber particle mixture

(2019) Junfeng Gao et al.   CONSTRUCTION AND BUILDING MATERIALS

The use of polyurethane for asphalt pavement engineering applications: A state-of-the-art review

(2019) Lin Cong et al.   CONSTRUCTION AND BUILDING MATERIALS

Life cycle assessment and life cycle cost analysis of recycled solid waste materials in highway pavement: A review

(2019) Jin Li et al.   JOURNAL OF CLEANER PRODUCTION

Evaluation of a Cold-Mixed High-Performance Polyurethane Mixture

(2019) Sun Min et al.   Advances in Materials Science and Engineering

Effect of ultraviolet (UV) aging on rheology properties and microstructure of polyurethane (PU) modified asphalt

(2019) Jinmiao Fang et al.   Materials Research Express

Rheological properties and micro-characteristics of polyurethane composite modified asphalt

(2019) Xin Jin et al.   CONSTRUCTION AND BUILDING MATERIALS

Review on soft polyurethane flame retardant

(2019) P.M. Visakh et al.   CONSTRUCTION AND BUILDING MATERIALS

The synergistic effect of organic montmorillonite and thermoplastic polyurethane on properties of asphalt binder

(2019) Meng Jia et al.   CONSTRUCTION AND BUILDING MATERIALS

Engineering and leaching properties of asphalt binders modified with polyurethane and Cecabase additives for warm-mix asphalt application

(2019) Nurul Aqilah Awazhar et al.   CONSTRUCTION AND BUILDING MATERIALS

Waterproof and Antiscour Properties of Asphalt-Based Composite Seals for Airfield Base Layer

(2019) Feipeng Xiao et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

Numerical analysis for the influence of saturation on the base course of permeable pavement with a novel polyurethane binder

(2019) Guoyang Lu et al.   CONSTRUCTION AND BUILDING MATERIALS

Development of shape memory polyurethane based sealant for concrete pavement

(2018) Dongya Shen et al.   CONSTRUCTION AND BUILDING MATERIALS

Influence of thermoplastic polyurethane and synthesized polyurethane additive in performance of asphalt pavements

(2018) Behrokh Bazmara et al.   CONSTRUCTION AND BUILDING MATERIALS

Laboratory evaluation on performance of porous polyurethane mixtures and OGFC

(2018) Lin Cong et al.   CONSTRUCTION AND BUILDING MATERIALS

Performance optimization of one-component polyurethane healing agent for self-healing concrete

(2018) Zun-Xiang Hu et al.   CONSTRUCTION AND BUILDING MATERIALS

Preparation and evaluation of waste PET derived polyurethane polymer modified bitumen through in situ polymerization reaction

(2018) Rabindra K Padhan et al.   CONSTRUCTION AND BUILDING MATERIALS

Productions and applications of bio-asphalts – A review

(2018) Ningyi Su et al.   CONSTRUCTION AND BUILDING MATERIALS

Experimental study on anti-icing and deicing performance of polyurethane concrete as road surface layer

(2018) Jun Chen et al.   CONSTRUCTION AND BUILDING MATERIALS

Identification of asphalt aging characterization by spectrophotometry technique

(2018) Xiangdao Hou et al.   FUEL

Fatigue resistance of an aluminium one-component polyurethane adhesive joint for the automotive industry: Effect of surface roughness and adhesive thickness

(2018) Y. Boutar et al.   INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES

Evaluation of durability and functional performance of porous polyurethane mixture in porous pavement

(2018) Jun Chen et al.   JOURNAL OF CLEANER PRODUCTION

Preparation, properties and modification mechanism of polyurethane modified emulsified asphalt

(2018) Xiaohui Sheng et al.   CONSTRUCTION AND BUILDING MATERIALS

The use of polyurethane for structural and infrastructural engineering applications: A state-of-the-art review

(2018) H.M.C.C. Somarathna et al.   CONSTRUCTION AND BUILDING MATERIALS

Performance of polyurethane modified asphalt and its mixtures

(2018) Min Sun et al.   CONSTRUCTION AND BUILDING MATERIALS

Understanding the bitumen ageing phenomenon: A review

(2018) R. Tauste et al.   CONSTRUCTION AND BUILDING MATERIALS

Morphology, rheology, and physical properties of polymer-modified asphalt binders

(2018) Ali Behnood et al.   EUROPEAN POLYMER JOURNAL

Investigation on the Short-Term Aging-Resistance of Thermoplastic Polyurethane-Modified Asphalt Binders

(2018) Ruien Yu et al.   Polymers

Enhanced anti-aging and mechanical properties of polyamide 1010 by sol-hydrothermal synthetic titanium dioxide-coated kaolinite addition

(2017) Zhengdao Lu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Suitability of PoroElastic Road Surface (PERS) for urban roads in cold regions: Mechanical and functional performance assessment

(2017) Dawei Wang et al.   JOURNAL OF CLEANER PRODUCTION

A review on conducting polymer reinforced polyurethane composites

(2017) Halima Khatoon et al.   JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY

Viscoelastic Model and Stress Relaxation Evaluation of Pavement Crack Sealants at Low Temperature

(2017) Feng Li et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

Rheological properties and storage stability of asphalt modified with nanoscale polyurethane emulsion

(2017) Ruien Yu et al.   PETROLEUM SCIENCE AND TECHNOLOGY

Short-term evaluation of crack sealing and filling

(2016) Hyung Jun Ahn et al.   CONSTRUCTION AND BUILDING MATERIALS

Preparation, microstructure and rheological properties of asphalt sealants for bridge expansion joints

(2016) Shuang Liu et al.   CONSTRUCTION AND BUILDING MATERIALS

Study on the classical and rheological properties of castor oil-polyurethane pre polymer (C-PU) modified asphalt

(2016) Lei Xia et al.   CONSTRUCTION AND BUILDING MATERIALS

Healing of shape memory polyurethane fiber-reinforced syntactic foam subjected to tensile stress

(2016) Pengfei Zhang et al.   JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES

Comparison of Pavement Slab Stabilization Using Cementitious Grout and Injected Polyurethane Foam

(2016) Pavana K. R. Vennapusa et al.   JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES

Cold, warm, and hot programming of shape memory polymers

(2016) Guoqiang Li et al.   JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS

Electro-mechanical performance of polyurethane dielectric elastomer flexible micro-actuator composite modified with titanium dioxide-graphene hybrid fillers

(2016) Tian Chen et al.   MATERIALS & DESIGN

A review of the fundamentals of polymer-modified asphalts: Asphalt/polymer interactions and principles of compatibility

(2015) Giovanni Polacco et al.   ADVANCES IN COLLOID AND INTERFACE SCIENCE

Comparative study of the effects of anatase and rutile titanium dioxide nanoparticles on the structure and properties of waterborne polyurethane

(2015) Kechen Li et al.   COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS

Mechanical properties of kenaf fibre reinforced polymer composite: A review

(2015) N. Saba et al.   CONSTRUCTION AND BUILDING MATERIALS

Shape Memory Polymer-Based Sealant for a Compression Sealed Joint

(2015) Guoqiang Li et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

Critical parameters in designing segmented polyurethanes and their effect on morphology and properties: A comprehensive review

(2015) Iskender Yilgör et al.   POLYMER

The effects of the molecular weight and structure of polycarbonatediols on the properties of waterborne polyurethanes

(2015) Na Liu et al.   PROGRESS IN ORGANIC COATINGS

Atomic force microscopy to investigate asphalt binders: a state-of-the-art review

(2015) Prabir Kumar Das et al.   Road Materials and Pavement Design

Viscosity Evaluation Index of Hot-Applied Sealant for Asphalt Pavement

(2015) Feng Li et al.   TRANSPORTATION RESEARCH RECORD

Tuning of sunlight-induced self-cleaning and self-healing attributes of an elastomeric nanocomposite by judicious compositional variation of the TiO2–reduced graphene oxide nanohybrid

(2015) Suman Thakur et al.   Journal of Materials Chemistry A

Influence of the prepolymer molecular weight and free isocyanate content on the rheology of polyurethane modified bitumens

(2014) V. Carrera et al.   EUROPEAN POLYMER JOURNAL

Polymer modification of bitumen: Advances and challenges

(2014) Jiqing Zhu et al.   EUROPEAN POLYMER JOURNAL

Field assessment of a jointed concrete pavement foundation treated with injected polyurethane expandable foam

(2014) Pavana K.R. Vennapusa et al.   International Journal of Pavement Engineering

Effect of titanium dioxide (TiO 2 ) on largely improving solar reflectance and cooling property of high density polyethylene (HDPE) by influencing its crystallization behavior

(2014) Shichao Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Newly Developed Adhesive Strength Test for Measuring the Strength of Sealant between Joints of Concrete Pavement

(2014) Qiang Li et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

Field Investigation and Laboratory Evaluation of Asphalt Pavement Crack Seal Band

(2014) Feng Li et al.   JOURNAL OF TESTING AND EVALUATION

The development of polyurethane modified bitumen emulsions for cold mix applications

(2014) V. Carrera et al.   MATERIALS AND STRUCTURES

Polyurethanes: Versatile Materials and Sustainable Problem Solvers for Today’s Challenges

(2013) Hans-Wilhelm Engels et al.   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

Isocyanate-functionalized castor oil as a novel bitumen modifier

(2013) A.A. Cuadri et al.   CHEMICAL ENGINEERING SCIENCE

Review on advances in modeling and simulation of stone-based paving materials

(2013) Yu Liu et al.   CONSTRUCTION AND BUILDING MATERIALS

Performance optimization of composite modified asphalt sealant based on rheological behavior

(2013) Yiqiu Tan et al.   CONSTRUCTION AND BUILDING MATERIALS

In situ performance of field-moulded joint sealants in dams

(2013) Jahangir Mirza et al.   CONSTRUCTION AND BUILDING MATERIALS

Durability considerations of refurbished external walls

(2013) Petr Hradil et al.   CONSTRUCTION AND BUILDING MATERIALS

Processing of bitumens modified by a bio-oil-derived polyurethane

(2013) A.A. Cuadri et al.   FUEL

A review on FRP composites applications and durability concerns in the construction sector

(2013) Asifuz Zaman et al.   JOURNAL OF REINFORCED PLASTICS AND COMPOSITES

Morphology and properties of highly filled iPP/TiO2nanocomposites

(2013) Ahmad Zohrevand et al.   POLYMER ENGINEERING AND SCIENCE

Chemical modification of lignins: Towards biobased polymers

(2013) Stéphanie Laurichesse et al.   PROGRESS IN POLYMER SCIENCE

Structure—property relationships in the development of bituminous foams from MDI based prepolymers

(2013) M. A. Izquierdo et al.   RHEOLOGICA ACTA

Preparation and shape memory properties of TiO2/PLCL biodegradable polymer nanocomposites

(2013) Xi-li LU et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

A review of using waste and virgin polymer in pavement

(2012) Zahra Niloofar Kalantar et al.   CONSTRUCTION AND BUILDING MATERIALS

Bituminous polyurethane foams for building applications: Influence of bitumen hardness

(2012) M.A. Izquierdo et al.   CONSTRUCTION AND BUILDING MATERIALS

Synthesis and characterization of polyurethane sealants containing rosin intended for sealing defect in annulus for disc regeneration

(2012) Pilar Carbonell-Blasco et al.   INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES

Effects of MDI–PPG molecular weight on the thermorheological behaviour of MDI–isocyanate based bituminous foams

(2012) M.A. Izquierdo et al.   JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY

Entanglement-based shape memory polyurethanes: Synthesis and characterization

(2012) Xinzhu Gu et al.   POLYMER

Synthesis of shape memory polyurethane/clay nanocomposites and analysis of shape memory, thermal, and mechanical properties

(2012) M. Haghayegh et al.   POLYMER COMPOSITES

Enhanced UV-protection and antibacterial properties of natural rubber/rutile-TiO2 nanocomposites

(2012) Boonchai Seentrakoon et al.   POLYMER DEGRADATION AND STABILITY

From Vegetable Oils to Polyurethanes: Synthetic Routes to Polyols and Main Industrial Products

(2012) Myriam Desroches et al.   Polymer Reviews

Recent Advances in Vegetable Oil-Based Polyurethanes

(2011) Daniel P. Pfister et al.   ChemSusChem

Investigation on Structures and Properties of Shape Memory Polyurethane/Silica Nanocomposites

(2011) Longbin Xu et al.   CHINESE JOURNAL OF CHEMISTRY

Synthesis and Characterization of Polyurethane-Based Shape-Memory Polymers for Tailored Tg around Body Temperature for Medical Applications

(2011) Manzoor Ahmad et al.   MACROMOLECULAR CHEMISTRY AND PHYSICS

Studies on synthesis and properties of novel polyurethane pavement joint sealant modified with polydimethysiloxane

(2011) L Xu et al.   MATERIALS RESEARCH INNOVATIONS

Recent advances in polymer shape memory

(2011) Tao Xie   POLYMER

Plant Oils as Platform Chemicals for Polyurethane Synthesis: Current State-of-the-Art

(2010) Gerard Lligadas et al.   BIOMACROMOLECULES

Lightweight mortar made with recycled polyurethane foam

(2010) J. Gadea et al.   CEMENT & CONCRETE COMPOSITES

Castor oil as a renewable resource for the chemical industry

(2010) Hatice Mutlu et al.   EUROPEAN JOURNAL OF LIPID SCIENCE AND TECHNOLOGY

An overview on 12-polyurethane: Synthesis, structure and crystallization

(2010) C.E. Fernández et al.   EUROPEAN POLYMER JOURNAL

Novel stable MDI isocyanate-based bituminous foams

(2010) M.A. Izquierdo et al.   FUEL

Full-Scale Field Testing for Verification of Mechanical Properties of Polyurethane Foams for Use as Backfill in PCC Repairs

(2010) Lucy Phillips Priddy et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

Mitigating Transverse Joint Faulting in Jointed Concrete Pavement with Polyurethane Foam

(2010) Kevin Gaspard et al.   TRANSPORTATION RESEARCH RECORD

Full-Scale Field Testing for Injected Foam Stabilization of Portland Cement Concrete Repairs

(2010) Lucy P. Priddy et al.   TRANSPORTATION RESEARCH RECORD

A review of shape memory polymer composites and blends

(2009) Qinghao Meng et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Influence of Bitumen Colloidal Nature on the Design of Isocyanate-Based Bituminous Products with Enhanced Rheological Properties

(2009) Virginia Carrera et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Eco-economical polyurethane wood adhesives from cellulosic waste: Synthesis, characterization and adhesion study

(2009) Deepak Mishra et al.   INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES

Investigation of Settlement of a Jointed Concrete Pavement

(2009) Dar-Hao Chen et al.   JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES

Synthesis and characterization of polyurethane coatings derived from polyols synthesized with glycerol, phthalic anhydride and oleic acid

(2009) T.S. Velayutham et al.   PROGRESS IN ORGANIC COATINGS

Thermal stability and flame retardancy of polyurethanes

(2009) D.K. Chattopadhyay et al.   PROGRESS IN POLYMER SCIENCE

Novel bitumen/isocyanate-based reactive polymer formulations for the paving industry

(2009) Virginia Carrera et al.   RHEOLOGICA ACTA

The colloidal structure of bitumen: Consequences on the rheology and on the mechanisms of bitumen modification

(2008) Didier Lesueur   ADVANCES IN COLLOID AND INTERFACE SCIENCE

Moisture susceptibility of asphalt mixtures, Part 1: mechanisms

(2008) S. Caro et al.   International Journal of Pavement Engineering

Field Performance Monitoring of Repair Treatments on Joint Concrete Pavements

(2008) M. R. Mitchell et al.   JOURNAL OF TESTING AND EVALUATION

Influence of accelerated aging on clay-reinforced polyamide 6

(2008) P. Kiliaris et al.   POLYMER DEGRADATION AND STABILITY

Application of polymer composites in civil construction: A general review

(2007) Sandeep S. Pendhari et al.   COMPOSITE STRUCTURES