Recent Development in Beta Titanium Alloys for Biomedical Applications
Published 2020 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Recent Development in Beta Titanium Alloys for Biomedical Applications
Authors
Keywords
-
Journal
Metals
Volume 10, Issue 9, Pages 1139
Publisher
MDPI AG
Online
2020-08-24
DOI
10.3390/met10091139
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Processing, multiscale microstructure refinement and mechanical property enhancement of hypoeutectic Al–Si alloys via in situ bimodal-sized TiB2 particles
- (2020) Qiang Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Enhanced fatigue characteristics of a topology-optimized porous titanium structure produced by selective laser melting
- (2020) Y.J. Liu et al. Additive Manufacturing
- Wetting of graphite by molten Cu–xSn–yCr ternary alloys at 1373 K
- (2020) Qiaoli Lin et al. CARBON
- A study on the mechanical properties and corrosion behavior of the new as-cast TZNT alloys for biomedical applications
- (2020) Amir Zareidoost et al. Materials Science & Engineering C-Materials for Biological Applications
- Strengthening mechanism and corrosion resistance of beta-type Ti-Nb-Zr-Mn alloys
- (2020) S.F. Jawed et al. Materials Science & Engineering C-Materials for Biological Applications
- Superelastic behavior of in-situ eutectic-reaction manufactured high strength 3D porous NiTi-Nb scaffold
- (2020) Shifeng Liu et al. SCRIPTA MATERIALIA
- Beta Titanium Alloys Produced from Titanium Hydride: Effect of Alloying Elements on Titanium Hydride Decomposition
- (2020) Caterina Chirico et al. Metals
- The evolution of microstructure and electrical performance in doped Mn-Co and Cu-Mn oxide layers with the extended oxidation time
- (2020) P.Y. Guo et al. CORROSION SCIENCE
- Additive manufacturing of low-cost porous titanium-based composites for biomedical applications: Advantages, challenges and opinion for future development
- (2020) Hooyar Attar et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Additive manufacturing of in-situ reinforced Ti–35Nb–5Ta–7Zr (TNTZ) alloy by selective electron beam melting (SEBM)
- (2020) Kun Yang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Breaking the limit of Young’s modulus in low-cost Ti–Nb–Zr alloy for biomedical implant applications
- (2020) Taekyung Lee et al. JOURNAL OF ALLOYS AND COMPOUNDS
- In situ fabrication of a titanium-niobium alloy with tailored microstructures, enhanced mechanical properties and biocompatibility by using selective laser melting
- (2020) Danlei Zhao et al. Materials Science & Engineering C-Materials for Biological Applications
- Effect of grain size on the recovery strain in a new Ti–20Zr–12Nb–2Sn superelastic alloy
- (2020) J.J. Gao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A 3D-Printed Ultra-Low Young’s Modulus β-Ti Alloy for Biomedical Applications
- (2020) Massimo Pellizzari et al. Materials
- Superelastic Behavior of Ti-Nb Alloys Obtained by the Laser Engineered Net Shaping (LENS) Technique
- (2020) Damian Kalita et al. Materials
- Selective laser melting manufactured porous Fe-based metallic glass matrix composite with remarkable catalytic activity and reusability
- (2020) Shun-Xing Liang et al. Applied Materials Today
- A low-cost metastable beta Ti alloy with high elastic admissible strain and enhanced ductility for orthopaedic application
- (2020) Yidong Xu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure, mechanical property and corrosion behavior of porous Ti–Ta–Nb–Zr
- (2020) B.Q. Li et al. Bioactive Materials
- Microstructural homogeneity and mechanical behavior of a selective laser melted Ti-35Nb alloy produced from an elemental powder mixture
- (2020) Jincheng Wang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Mechanical Properties and the Microstructure of β Ti-35Nb-10Ta-xFe Alloys Obtained by Powder Metallurgy for Biomedical Applications
- (2019) Angélica Amigó et al. Metals
- A Review on Biomedical Titanium Alloys: Recent Progress and Prospect
- (2019) Lai‐Chang Zhang et al. ADVANCED ENGINEERING MATERIALS
- Novel β-Ti35Zr28Nb alloy scaffolds manufactured using selective laser melting for bone implant applications
- (2019) Yuncang Li et al. Acta Biomaterialia
- Effects of laser surface alloying with Cr on microstructure and hardness of commercial purity Zr
- (2019) Ke Chen et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The Effect of EBM Process Parameters on Porosity and Microstructure of Ti-5Al-5Mo-5V-1Cr-1Fe Alloy
- (2019) Tomasz Kurzynowski et al. SCANNING
- Microstructure evolution and electrochemical properties of TiO2/Ti-35Nb-2Ta-3Zr micro/nano-composites fabricated by friction stir processing
- (2019) Hao Gu et al. MATERIALS & DESIGN
- Deformation and strength characteristics of Laves phases in titanium alloys
- (2019) C.D. Rabadia et al. MATERIALS & DESIGN
- Mechanical behavior and phase transformation of β-type Ti-35Nb-2Ta-3Zr alloy fabricated by 3D-Printing
- (2019) Noman Hafeez et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Mechanical characterization and deformation behavior of β-stabilized Ti-Nb-Sn-Cr alloys
- (2019) S.F. Jawed et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Selective laser melting of Ti–35Nb composite from elemental powder mixture: Microstructure, mechanical behavior and corrosion behavior
- (2019) J.C. Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Automatic remelting and enhanced mechanical performance of a plasma sprayed NiCrBSi coating
- (2019) Liang-Yu Chen et al. SURFACE & COATINGS TECHNOLOGY
- Near Net Shape Manufacture of Titanium Alloy Components from Powder and Wire: A Review of State-of-the-Art Process Routes
- (2019) Thomas Childerhouse et al. Metals
- Nanoindentation characterization on local plastic response of Ti-6Al-4V under high-load spherical indentation
- (2019) Yan Wen et al. Journal of Materials Research and Technology-JMR&T
- A comparative study on the nanoindentation behavior, wear resistance and in vitro biocompatibility of SLM manufactured CP–Ti and EBM manufactured Ti64 gyroid scaffolds
- (2019) Arash Ataee et al. Acta Biomaterialia
- Ultrahigh-performance TiNi shape memory alloy by 4D printing
- (2019) H.Z. Lu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A review of catalytic performance of metallic glasses in wastewater treatment: Recent progress and prospects
- (2019) Lai-Chang Zhang et al. PROGRESS IN MATERIALS SCIENCE
- Calculation of Oxygen Diffusion Coefficients in Oxide Films Formed on Low-Temperature Annealed Zr Alloys and Their Related Corrosion Behavior
- (2019) Lina Zhang et al. Metals
- Design and fabrication of a (β+α") dual-phase Ti-Nb-Sn alloy with linear deformation behavior for biomedical applications
- (2019) Shun Guo et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Simultaneously improved strength and toughness of in situ bi-phased TiB2–Ti(C,N)–Ni cermets by Mo addition
- (2019) Hong-Yu Yang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Improved trade-off between strength and plasticity in titanium based metastable beta type Ti-Zr-Fe-Sn alloys
- (2019) C.D. Rabadia et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Design of TiC nanoparticles and their morphology manipulating mechanisms by stoichiometric ratios: Experiment and first-principle calculation
- (2019) Bai-Xin Dong et al. MATERIALS & DESIGN
- Beta-type Ti-Nb-Zr-Cr alloys with large plasticity and significant strain hardening
- (2019) S.F. Jawed et al. MATERIALS & DESIGN
- Surface Modification of Titanium and Titanium Alloys: Technologies, Developments, and Future Interests
- (2019) Lai-Chang Zhang et al. ADVANCED ENGINEERING MATERIALS
- The effect and mechanism of alloying elements on Al/SiC interfacial reaction in Al melt
- (2019) Haotian Tong et al. APPLIED SURFACE SCIENCE
- Thermomechanical treatments influence on the phase composition, microstructure, and selected mechanical properties of Ti–20Zr–Mo alloys system for biomedical applications
- (2019) P.A.B. Kuroda et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure and properties of equiatomic Ti–Ni alloy fabricated by selective laser melting
- (2019) D.C. Ren et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and Mechanical Properties of Ti-35Nb-2Ta-3Zr Alloy by Laser Quenching
- (2019) Ting Zhang et al. Frontiers in Materials
- Microstructure evolution and superelasticity of layer-like NiTiNb porous metal prepared by eutectic reaction
- (2018) Liqiang Wang et al. ACTA MATERIALIA
- Compressive and fatigue behavior of functionally graded Ti-6Al-4V meshes fabricated by electron beam melting
- (2018) S. Zhao et al. ACTA MATERIALIA
- Porous Titanium Implants: A Review
- (2018) Krzysztof Pałka et al. ADVANCED ENGINEERING MATERIALS
- Corrosion behavior of non-equilibrium Zr-Sn-Nb-Fe-Cu-O alloys in high-temperature 0.01 M LiOH aqueous solution and degradation of the surface oxide films
- (2018) Liang-Yu Chen et al. CORROSION SCIENCE
- Nanotwins induced by pulsed laser and their hardening effect in a Zr alloy
- (2018) Linjiang Chai et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Anisotropic mechanical behavior of biomedical Ti-13Nb-13Zr alloy manufactured by selective laser melting
- (2018) Libo Zhou et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Synthesis of Ti-5Al, Ti-6Al-7Nb, and Ti-22Al-25Nb alloys from elemental powders using powder-bed fusion additive manufacturing
- (2018) Igor Polozov et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Thermomechanical processing of a high strength metastable beta titanium alloy powder, consolidated using the low-cost FAST- forge process
- (2018) Emma Calvert et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Synthesis of porous Ti–50Ta alloy by powder metallurgy
- (2018) Grzegorz Dercz et al. MATERIALS CHARACTERIZATION
- Controlling the microstructure and mechanical properties of a metastable β titanium alloy by selective laser melting
- (2018) Wei Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- High-strength β stabilized Ti-Nb-Fe-Cr alloys with large plasticity
- (2018) C.D. Rabadia et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Early plastic deformation behaviour and energy absorption in porous β-type biomedical titanium produced by selective laser melting
- (2018) Y.J. Liu et al. SCRIPTA MATERIALIA
- Unmasking chloride attack on the passive film of metals
- (2018) B. Zhang et al. Nature Communications
- A Review of Metastable Beta Titanium Alloys
- (2018) R. Kolli et al. Metals
- Improved Corrosion Resistance on Selective Laser Melting Produced Ti-5Cu Alloy after Heat Treatment
- (2018) Peng Qin et al. ACS Biomaterials-Science & Engineering
- Laves phase precipitation in Ti-Zr-Fe-Cr alloys with high strength and large plasticity
- (2018) C.D. Rabadia et al. MATERIALS & DESIGN
- Improved Corrosion Resistance on Selective Laser Melting Produced Ti-5Cu Alloy after Heat Treatment
- (2018) Peng Qin et al. ACS Biomaterials Science & Engineering
- Compelling Rejuvenated Catalytic Performance in Metallic Glasses
- (2018) Shun-Xing Liang et al. ADVANCED MATERIALS
- Selective laser melting of titanium alloy with 50 wt% tantalum: Effect of laser process parameters on part quality
- (2018) Swee Leong Sing et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Synthesis of biphasic calcium phosphate (BCP) coatings on β‒type titanium alloys reinforced with rutile-TiO2 compounds: adhesion resistance and in-vitro corrosion
- (2018) Burak Dikici et al. JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY
- Effect of Ta addition on the microstructures and mechanical properties of in situ bi-phase (TiB2-TiCxNy)/(Ni-Ta) cermets
- (2018) Hong-Yu Yang et al. CERAMICS INTERNATIONAL
- Investigation of the wear and corrosion behaviors of Ti5Al2.5Fe and Ti6Al4V alloys produced by mechanical alloying method in simulated body fluid environment
- (2018) Ijlal Simsek et al. Materials Science & Engineering C-Materials for Biological Applications
- Phase interaction induced texture in a plasma sprayed-remelted NiCrBSi coating during solidification: An electron backscatter diffraction study
- (2018) Liang-Yu Chen et al. SURFACE & COATINGS TECHNOLOGY
- Resemblance in Corrosion Behavior of Selective Laser Melted and Traditional Monolithic β Ti-24Nb-4Zr-8Sn Alloy
- (2018) Peng Qin et al. ACS Biomaterials-Science & Engineering
- Improved deformation behavior in Ti-Zr-Fe-Mn alloys comprising the C14 type Laves and β phases
- (2018) C.D. Rabadia et al. MATERIALS & DESIGN
- Nanoindentation study of mechanical properties of Ti based alloys with Fe and Ta additions
- (2017) Shima Ehtemam-Haghighi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Erosion-wear and intergranular corrosion resistance properties of AISI 304L austenitic stainless steel after low-temperature plasma nitriding
- (2017) Xujuan Qin et al. JOURNAL OF ALLOYS AND COMPOUNDS
- FAST-forge − A new cost-effective hybrid processing route for consolidating titanium powder into near net shape forged components
- (2017) N.S. Weston et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Heat Treatment Degrading the Corrosion Resistance of Selective Laser Melted Ti-6Al-4V Alloy
- (2017) Nianwei Dai et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Effect of annealing treatment on the microstructure and mechanical properties of a duplex Zr-2.5Nb alloy
- (2017) M. Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- α→β Transformation characteristics revealed by pulsed laser-induced non-equilibrium microstructures in duplex-phase Zr alloy
- (2017) LinJiang Chai et al. Science China-Technological Sciences
- Microstructural evolution in a superelastic metastable beta-Ti alloy
- (2017) James Coakley et al. SCRIPTA MATERIALIA
- Crystallographic texture control of beta-type Ti–15Mo–5Zr–3Al alloy by selective laser melting for the development of novel implants with a biocompatible low Young's modulus
- (2017) Takuya Ishimoto et al. SCRIPTA MATERIALIA
- Effects of solution treatment and aging on the microstructure, mechanical properties, and corrosion resistance of a β type Ti–Ta–Hf–Zr alloy
- (2017) Jixing Lin et al. RSC Advances
- Effect of Nb content on microstructure, property and in vitro apatite-forming capability of Ti-Nb alloys fabricated via selective laser melting
- (2017) Qian Wang et al. MATERIALS & DESIGN
- Corrosion-wear of β-Ti alloy TMZF (Ti-12Mo-6Zr-2Fe) in simulated body fluid
- (2016) Xueyuan Yang et al. Acta Biomaterialia
- Microstructure, defects and mechanical behavior of beta-type titanium porous structures manufactured by electron beam melting and selective laser melting
- (2016) Y.J. Liu et al. ACTA MATERIALIA
- Texture Development in Cold Deformed and Recrystallized Ti-30Nb-4Sn Alloy and Its Effects on Hardness and Young's Modulus
- (2016) Leonardo Fanton et al. ADVANCED ENGINEERING MATERIALS
- Effect of Rapid Solidification on Microstructure and Elastic Modulus of β Ti-x Nb-3Fe Alloys for Implant Applications
- (2016) Conrado R. M. Afonso et al. ADVANCED ENGINEERING MATERIALS
- Corrosion behavior of selective laser melted Ti-6Al-4 V alloy in NaCl solution
- (2016) Nianwei Dai et al. CORROSION SCIENCE
- Distinction in corrosion resistance of selective laser melted Ti-6Al-4V alloy on different planes
- (2016) Nianwei Dai et al. CORROSION SCIENCE
- On the electropolishing and anodic oxidation of Ti-15Mo alloy
- (2016) Dorota Babilas et al. ELECTROCHIMICA ACTA
- Production of porous Ti5Al2.5Fe alloy via pressureless spark plasma sintering
- (2016) R. Yamanoglu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Selective laser melting of titanium alloy with 50 wt% tantalum: Microstructure and mechanical properties
- (2016) Swee Leong Sing et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Grain Boundary Character Distribution of TLM Titanium Alloy During Deformation
- (2016) X. F. Bai et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Characterization of the photoactivity of nanotube layers grown on Ti–35Nb and Ti–35Nb–4Sn alloys
- (2016) Nathalia Carolina Veríssimo et al. JOURNAL OF MATERIALS SCIENCE
- Electron Beam Melted Beta-type Ti–24Nb–4Zr–8Sn Porous Structures With High Strength-to-Modulus Ratio
- (2016) Yujing Liu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Orthorhombic martensite formation upon aging in a Ti-30Nb-4Sn alloy
- (2016) Camilo A.F. Salvador et al. MATERIALS CHEMISTRY AND PHYSICS
- Bioactive surface modification of Ti–29Nb–13Ta–4.6Zr alloy through alkali solution treatments
- (2016) E. Takematsu et al. Materials Science & Engineering C-Materials for Biological Applications
- Biocompatibility of new Ti–Nb–Ta base alloys
- (2016) Abdelrahman H. Hussein et al. Materials Science & Engineering C-Materials for Biological Applications
- In situ elaboration of a binary Ti–26Nb alloy by selective laser melting of elemental titanium and niobium mixed powders
- (2016) M. Fischer et al. Materials Science & Engineering C-Materials for Biological Applications
- Development of a new β Ti alloy with low modulus and favorable plasticity for implant material
- (2016) S.X. Liang et al. Materials Science & Engineering C-Materials for Biological Applications
- Influence of Nb on the β → α″ martensitic phase transformation and properties of the newly designed Ti–Fe–Nb alloys
- (2016) Shima Ehtemam-Haghighi et al. Materials Science & Engineering C-Materials for Biological Applications
- Equiaxed Ti-based composites with high strength and large plasticity prepared by sintering and crystallizing amorphous powder
- (2016) L.H. Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Shaped metal deposition technique in additive manufacturing: A review
- (2016) Oguzhan Yilmaz et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Surface treatment and its effect on the electrochemical behavior of Ti–15Mo–3Nb–3Al alloy
- (2016) R. V. Lakshmi et al. RSC Advances
- Improvement of microstructure, mechanical and corrosion properties of biomedical Ti-Mn alloys by Mo addition
- (2016) Pedro Fernandes Santos et al. MATERIALS & DESIGN
- Evaluation of mechanical and wear properties of Ti xNb 7Fe alloys designed for biomedical applications
- (2016) S. Ehtemam-Haghighi et al. MATERIALS & DESIGN
- Phase transition, microstructural evolution and mechanical properties of Ti-Nb-Fe alloys induced by Fe addition
- (2016) Shima Ehtemam-Haghighi et al. MATERIALS & DESIGN
- Phase transformation and deformation behavior of NiTi-Nb eutectic joined NiTi wires
- (2016) Liqiang Wang et al. Scientific Reports
- Selective Laser Melting of Titanium Alloys and Titanium Matrix Composites for Biomedical Applications: A Review
- (2015) Lai-Chang Zhang et al. ADVANCED ENGINEERING MATERIALS
- Zr–Sn–Nb–Fe–Si–O alloy for fuel cladding candidate: Processing, microstructure, corrosion resistance and tensile behavior
- (2015) Liangyu Chen et al. CORROSION SCIENCE
- Effect of α″ martensite on the microstructure and mechanical properties of beta-type Ti–Fe–Ta alloys
- (2015) S. Ehtemam Haghighi et al. MATERIALS & DESIGN
- Comparative study of structure formation and mechanical behavior of age-hardened Ti–Nb–Zr and Ti–Nb–Ta shape memory alloys
- (2015) K. Inaekyan et al. MATERIALS CHARACTERIZATION
- On the influence of space holder in the development of porous titanium implants: Mechanical, computational and biological evaluation
- (2015) S. Muñoz et al. MATERIALS CHARACTERIZATION
- Superelasticity, corrosion resistance and biocompatibility of the Ti–19Zr–10Nb–1Fe alloy
- (2015) Pengfei Xue et al. Materials Science & Engineering C-Materials for Biological Applications
- First principles theoretical investigations of low Young's modulus beta Ti–Nb and Ti–Nb–Zr alloys compositions for biomedical applications
- (2015) Rajamallu Karre et al. Materials Science & Engineering C-Materials for Biological Applications
- Metallic implant biomaterials
- (2015) Qizhi Chen et al. MATERIALS SCIENCE & ENGINEERING R-REPORTS
- Processing and properties of topologically optimised biomedical Ti–24Nb–4Zr–8Sn scaffolds manufactured by selective laser melting
- (2015) Y.J. Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Investigation of Deformation Mechanisms in β-Type Ti-35Nb-2Ta-3Zr Alloy via FSP Leading to Surface Strengthening
- (2015) Liqiang Wang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Selective Laser Melting of Ti-45Nb Alloy
- (2015) Holger Schwab et al. Metals
- Fabrication of nano-grained Ti–Nb–Zr biomaterials using spark plasma sintering
- (2015) M.A. Hussein et al. MATERIALS & DESIGN
- Microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting
- (2014) B. Vrancken et al. ACTA MATERIALIA
- Fabrication of Metallic Biomedical Scaffolds with the Space Holder Method: A Review
- (2014) Budi Arifvianto et al. Materials
- New Developments of Ti-Based Alloys for Biomedical Applications
- (2014) Yuhua Li et al. Materials
- Electrochemical properties, chemical composition and thickness of passive film formed on novel Ti–20Nb–10Zr–5Ta alloy
- (2013) Ingrid Milošev et al. ELECTROCHIMICA ACTA
- A new asymmetric Schiff base system as fluorescent chemosensor for Al3+ ion
- (2013) Reza Azadbakht et al. INORGANIC CHEMISTRY COMMUNICATIONS
- Effects of phase stability and processing on the mechanical properties of Ti–Nb based β Ti alloys
- (2013) Damon Kent et al. Journal of the Mechanical Behavior of Biomedical Materials
- Mechanism of twinning-induced plasticity in β-type Ti–15Mo alloy
- (2013) Xiaohua Min et al. SCRIPTA MATERIALIA
- Influence of Zr content on microstructure and mechanical properties of implant Ti–35Nb–4Sn–6Mo–xZr alloys
- (2013) Shi-juan DAI et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- A comparative study of the cytotoxicity and corrosion resistance of nickel–titanium and titanium–niobium shape memory alloys
- (2012) Rebecca E. McMahon et al. Acta Biomaterialia
- Development of new metallic alloys for biomedical applications
- (2012) Mitsuo Niinomi et al. Acta Biomaterialia
- Biocompatible low Young's modulus achieved by strong crystallographic elastic anisotropy in Ti–15Mo–5Zr–3Al alloy single crystal
- (2012) S.-H. Lee et al. Journal of the Mechanical Behavior of Biomedical Materials
- Biocompatibility of Ti-alloys for long-term implantation
- (2012) Mohamed Abdel-Hady Gepreel et al. Journal of the Mechanical Behavior of Biomedical Materials
- Microstructure, mechanical, and anticorrosive properties of a new Ti-20Nb-10Zr-5Ta alloy based on nontoxic and nonallergenic elements
- (2012) Monica Popa et al. METALS AND MATERIALS INTERNATIONAL
- On the design of new β-metastable titanium alloys with improved work hardening rate thanks to simultaneous TRIP and TWIP effects
- (2012) Matthieu Marteleur et al. SCRIPTA MATERIALIA
- Electrochemical corrosion behavior of Ti–24Nb–4Zr–8Sn alloy in a simulated physiological environment
- (2011) Y. Bai et al. APPLIED SURFACE SCIENCE
- Corrosion behavior of β titanium alloys for biomedical applications
- (2011) M. Atapour et al. Materials Science & Engineering C-Materials for Biological Applications
- Microstructural Characterization of a Prototype Titanium Alloy Structure Processed via Direct Laser Deposition (DLD)
- (2011) Daniel Clark et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Conventional Powder Metallurgy Process and Characterization of Porous Titanium for Biomedical Applications
- (2011) Y. Torres et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Fabrication of biomedical Ti–35Nb–7Zr–5Ta alloys by mechanical alloying and spark plasma sintering
- (2011) L M Zou et al. POWDER METALLURGY
- Manufacture by selective laser melting and mechanical behavior of a biomedical Ti–24Nb–4Zr–8Sn alloy
- (2011) L.C. Zhang et al. SCRIPTA MATERIALIA
- A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
- (2010) Lore Thijs et al. ACTA MATERIALIA
- The effect of oxygen on α″ martensite and superelasticity in Ti–24Nb–4Zr–8Sn
- (2010) E.G. Obbard et al. ACTA MATERIALIA
- Wear and corrosion behaviour of Ti–13Nb–13Zr and Ti–6Al–4V alloys in simulated physiological solution
- (2010) I. Cvijović-Alagić et al. CORROSION SCIENCE
- Gene expression of markers of osteogenic differentiation of human mesenchymal cells on collagen I-modified microrough titanium surfaces
- (2010) M. Morra et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Production of Ti–13Nb–13Zr alloy for surgical implants by powder metallurgy
- (2010) V. A. R. Henriques et al. JOURNAL OF MATERIALS SCIENCE
- Mechanical properties of low modulus ββ titanium alloys designed from the electronic approach
- (2010) P. Laheurte et al. Journal of the Mechanical Behavior of Biomedical Materials
- Role of alloying elements in microstructure evolution and alloying elements behaviour during sintering of a near-β titanium alloy
- (2010) A. Carman et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- An electrochemical study on self-ordered nanoporous and nanotubular oxide on Ti–35Nb–5Ta–7Zr alloy for biomedical applications
- (2009) Viswanathan S. Saji et al. Acta Biomaterialia
- Porous TiNbZr alloy scaffolds for biomedical applications
- (2009) Xiaojian Wang et al. Acta Biomaterialia
- In vivo investigation of the inflammatory response against allylamine plasma polymer coated titanium implants in a rat model
- (2009) A. Hoene et al. Acta Biomaterialia
- High resolution transmission electron microscopy study of the hardening mechanism through phase separation in a β-Ti–35Nb–7Zr–5Ta alloy for implant applications
- (2009) Conrado R.M. Afonso et al. Acta Biomaterialia
- Influence of porosity on mechanical properties and in vivo response of Ti6Al4V implants
- (2009) Amit Bandyopadhyay et al. Acta Biomaterialia
- In situ impedance spectroscopy study of the electrochemical corrosion of Ti and Ti–6Al–4V in simulated body fluid at 25°C and 37°C
- (2009) V.A. Alves et al. CORROSION SCIENCE
- Electrochemical corrosion behaviour of nanotubular Ti–13Nb–13Zr alloy in Ringer’s solution
- (2009) Viswanathan S. Saji et al. CORROSION SCIENCE
- Electrochemical characterization of β-Ti alloy in Ringer's solution for implant application
- (2009) Satendra Kumar et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Dehydrogenation characteristics of Ti- and Ni/Ti-catalyzed Mg hydrides
- (2009) H.B. Lu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Engineered porous metals for implants
- (2008) B. Vamsi Krishna et al. JOM
- Corrosion behavior of Ti–13Nb–13Zr alloy used as a biomaterial
- (2008) T.C. Niemeyer et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Processing, characterization, andin vitro/in vivoevaluations of powder metallurgy processed Ti-13Nb-13Zr alloys
- (2008) Marco C. Bottino et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Grain-refinement mechanisms in titanium alloys
- (2008) M.J. Bermingham et al. JOURNAL OF MATERIALS RESEARCH
- Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
- (2008) M. Geetha et al. PROGRESS IN MATERIALS SCIENCE
- In vitro apatite formation on chemically treated (P/M) Ti–13Nb–13Zr
- (2007) Frank A. Müller et al. DENTAL MATERIALS
- Pitting corrosion of Cu–Zr metallic glasses in hydrochloric acid solutions
- (2007) H.B. Lu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Isochronal sintering of the blended elemental Ti–35Nb alloy
- (2007) D.R. Santos et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Histomorphologic evaluation of Ti–13Nb–13Zr alloys processed via powder metallurgy. A study in rabbits
- (2006) M.C. Bottino et al. Materials Science & Engineering C-Materials for Biological Applications
Become a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get StartedAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started