Strategies for the production of PAN-Based carbon fibers with high tensile strength
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Strategies for the production of PAN-Based carbon fibers with high tensile strength
Authors
Keywords
PAN-Based carbon fiber, Tensile strength, Defects, Stabilization, Carbonization, Post-treatment
Journal
CARBON
Volume 186, Issue -, Pages 644-677
Publisher
Elsevier BV
Online
2021-10-22
DOI
10.1016/j.carbon.2021.10.061
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- A novel methodology for designing thermal processes in order to optimize stabilization of polyacrylonitrile (PAN) fibers
- (2020) Spyridon Soulis et al. POLYMERS FOR ADVANCED TECHNOLOGIES
- Enhancement in mechanical properties of polyamide 66-carbon fiber composites containing graphene oxide-carbon nanotube hybrid nanofillers synthesized through in situ interfacial polymerization
- (2020) Beom-Gon Cho et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Introduction of a Methodology to Enhance the Stabilization Process of PAN Fibers by Modeling and Advanced Characterization
- (2020) George Konstantopoulos et al. Materials
- Evolution of structural inhomogeneity in polyacrylonitrile fibers by oxidative stabilization
- (2020) Jiwon Choi et al. CARBON
- Effect of amorphous carbon on the tensile behavior of polyacrylonitrile (PAN)-based carbon fibers
- (2019) Fenghao Yang et al. JOURNAL OF MATERIALS SCIENCE
- A study on the microstructural changes and mechanical behaviors of carbon fibers induced by optimized electrochemical etching
- (2019) Kwan-Woo Kim et al. COMPOSITES PART B-ENGINEERING
- Electrochemical modification of carbon fiber yarns in cementitious pore solution for an enhanced interaction towards concrete matrices
- (2019) Huanyu Li et al. APPLIED SURFACE SCIENCE
- A two-step carbon fiber surface treatment and its effect on the interfacial properties of CF/EP composites: The electrochemical oxidation followed by grafting of silane coupling agent
- (2019) Zhangping Wen et al. APPLIED SURFACE SCIENCE
- Generation and characterization of carbon fiber microstructures by atomistic simulations
- (2019) Kaushik Joshi et al. CARBON
- Microstructure and properties of polyacrylonitrile based carbon fibers
- (2019) Junshan Lu et al. POLYMER TESTING
- Investigating nanostructures in carbon fibres using Raman spectroscopy
- (2018) Haruki Okuda et al. CARBON
- Molecular and thermal studies of carbon fiber precursor polymers with low thermal-oxidative stabilization characteristics
- (2018) G. Santhana Krishnan et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Effect of acrylonitrile sequence distribution on the thermal stabilization reactions and carbon yields of poly(acrylonitrile-co-methyl acrylate)
- (2018) Jian Hao et al. POLYMER DEGRADATION AND STABILITY
- Microwave treatment of pre-oxidized fibers for improving their structure and mechanical properties
- (2018) Jianhua Liu et al. CERAMICS INTERNATIONAL
- Effect of boron doping on the electrical conductivity of metallicity-separated single walled carbon nanotubes
- (2018) Kazunori Fujisawa et al. Nanoscale
- Evaluation of the effect of PyC coating thickness on the mechanical properties of T700 carbon fiber tows
- (2018) Ting Zhang et al. APPLIED SURFACE SCIENCE
- Fabrication of low-cost carbon fibers using economical precursors and advanced processing technologies
- (2018) Dalsu Choi et al. CARBON
- Molecular modeling of the microstructure evolution during carbon fiber processing
- (2017) Saaketh Desai et al. JOURNAL OF CHEMICAL PHYSICS
- A reconsideration of the relationship between structural features and mechanical properties of carbon fibers
- (2017) Denghua Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Evolution of radial heterogeneity in polyacrylonitrile fibres during thermal stabilization: An overview
- (2017) Srinivas Nunna et al. POLYMER DEGRADATION AND STABILITY
- Carbonization with Misfusion: Fundamental Limits of Carbon-Fiber Strength Revisited
- (2016) Nitant Gupta et al. ADVANCED MATERIALS
- New insights into orientation distribution of high strength polyacrylonitrile-based carbon fibers with skin-core structure
- (2016) Xinshuang Guo et al. CARBON
- Tensile failure phenomena in carbon fibres
- (2016) Haruki Okuda et al. CARBON
- Surface structures of PAN-based carbon fibers and their influences on the interface formation and mechanical properties of carbon-carbon composites
- (2016) Shuai Wu et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Processing, structure, and properties of carbon fibers
- (2016) Bradley A. Newcomb COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- High-resolution imaging of the nanostructured surface of polyacrylonitrile-based fibers
- (2016) Christina Kunzmann et al. JOURNAL OF MATERIALS SCIENCE
- Characterisation of CVD carbon coatings on NextelTM440 fibres
- (2016) Y. Wang et al. SURFACE ENGINEERING
- Effects of oxygen content in the atmosphere on thermal oxidative stabilization of polyacrylonitrile fibers
- (2016) Jing Wang et al. RSC Advances
- Strengthened PAN-based carbon fibers obtained by slow heating rate carbonization
- (2016) Min-A Kim et al. Scientific Reports
- Basic structural units in carbon fibers: Atomistic models and tensile behavior
- (2015) Evgeni S. Penev et al. CARBON
- High strength and high modulus carbon fibers
- (2015) Han Gi Chae et al. CARBON
- Two step microwave plasma carbonization including low plasma power pre-carbonization for polyacrylonitrile based carbon fiber
- (2015) Seong Yun Kim et al. POLYMER
- Boron-doped onion-like carbon with enriched substitutional boron: the relationship between electronic properties and catalytic performance
- (2015) Yangming Lin et al. Journal of Materials Chemistry A
- Tensile strength distribution of carbon fibers at short gauge lengths
- (2014) J. Watanabe et al. ADVANCED COMPOSITE MATERIALS
- Influence of surface defects on the tensile strength of carbon fibers
- (2014) F. Vautard et al. APPLIED SURFACE SCIENCE
- Young’s modulus, thermal conductivity, electrical resistivity and coefficient of thermal expansion of mesophase pitch-based carbon fibers
- (2014) Francisco G. Emmerich CARBON
- Evaluation of fiber surface treatment on the interfacial behavior of carbon fiber-reinforced polypropylene composites
- (2014) Song Hee Han et al. COMPOSITES PART B-ENGINEERING
- Reduction in tensile strength of polyacrylonitrile-based carbon fibers in liquids and its application to defect analysis
- (2013) Masatoshi Shioya et al. CARBON
- Microstructural evolution and oxidation resistance of polyacrylonitrile-based carbon fibers doped with boron by the decomposition of B4C
- (2013) Huiqi Wang et al. CARBON
- The effect of high-temperature vapor deposition polymerization of polyimide coating on tensile properties of polyacrylonitrile- and pitch-based carbon fibers
- (2013) Kimiyoshi Naito JOURNAL OF MATERIALS SCIENCE
- Effect of the oxygen-induced modification of polyacrylonitrile fibers during thermal-oxidative stabilization on the radial microcrystalline structure of the resulting carbon fibers
- (2013) Yan Xue et al. POLYMER DEGRADATION AND STABILITY
- Degradation and Healing Mechanisms of Carbon Fibers during the Catalytic Growth of Carbon Nanotubes on Their Surfaces
- (2012) Kyoung Ju Kim et al. ACS Applied Materials & Interfaces
- A comparison of the effect of graphitization on microstructures and properties of polyacrylonitrile and mesophase pitch-based carbon fibers
- (2012) Xianying Qin et al. CARBON
- Improved tensile strength of carbon fibers undergoing catalytic growth of carbon nanotubes on their surface
- (2012) Kyoung Ju Kim et al. CARBON
- The effect of grain size on the lattice thermal conductivity of an individual polyacrylonitrile-based carbon fiber
- (2012) L. Qiu et al. CARBON
- Anodic Oxidation on Structural Evolution and Tensile Properties of Polyacrylonitrile Based Carbon Fibers with Different Surface Morphology
- (2012) Zhaorui Li et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Effect of heating and stretching polyacrylonitrile precursor fibers in steam on the properties of stabilized fibers and carbon fibers
- (2012) Xianying Qin et al. POLYMER ENGINEERING AND SCIENCE
- Improving preferred orientation and mechanical properties of PAN-based carbon fibers by pretreating precursor fibers in nitrogen
- (2011) Xianying Qin et al. CARBON
- High-temperature vapor deposition polymerization polyimide coating for elimination of surface nano-flaws in high-strength carbon fiber
- (2011) Tamaki Naganuma et al. CARBON
- A small-angle X-ray scattering study and molecular dynamics simulation of microvoid evolution during the tensile deformation of carbon fibers
- (2011) Caizhen Zhu et al. CARBON
- The effect of gauge length on tensile strength and Weibull modulus of polyacrylonitrile (PAN)- and pitch-based carbon fibers
- (2011) Kimiyoshi Naito et al. JOURNAL OF MATERIALS SCIENCE
- Further investigation on boric acid catalytic graphitization of polyacrylonitrile carbon fibers: Mechanism and mechanical properties
- (2011) Ya Wen et al. MATERIALS & DESIGN
- Correlation between graphite crystallite distribution morphology and the mechanical properties of carbon fiber during heat treatment
- (2011) Aijun Gao et al. MATERIALS LETTERS
- Interfacial and mechanical properties of carbon fibers modified by electrochemical oxidation in (NH4HCO3)/(NH4)2C2O4·H2O aqueous compound solution
- (2010) Jie Liu et al. APPLIED SURFACE SCIENCE
- Synthesis of boron-doped double-walled carbon nanotubes by the catalytic decomposition of tetrahydrofuran and triisopropyl borate
- (2010) S.C. Lyu et al. CARBON
- The effect of a compliant polyimide nanocoating on the tensile properties of a high strength PAN-based carbon fiber
- (2009) Tamaki Naganuma et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Effect of Atmospheres on Stabilization of Polyacrylonitrile Fibers
- (2009) Tongqing Sun et al. Journal of Macromolecular Science Part A-Pure and Applied Chemistry
- Continuous Nanoscale Carbon Fibers with Superior Mechanical Strength
- (2009) Jie Liu et al. Small
- Tensile strength and its variation of PAN-based carbon fibers. III. Weak-link analysis
- (2008) Jiangwei Yao et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Effect of microstructure on the mechanical properties of PAN-based carbon fibers during high-temperature graphitization
- (2008) Fujie Liu et al. JOURNAL OF MATERIALS SCIENCE
- Making Strong Fibers
- (2008) Han Gi Chae et al. SCIENCE
- Tensile properties of ultrahigh strength PAN-based, ultrahigh modulus pitch-based and high ductility pitch-based carbon fibers
- (2007) Kimiyoshi Naito et al. CARBON
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreFind the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
Search