Strategies for the production of PAN-Based carbon fibers with high tensile strength

A novel methodology for designing thermal processes in order to optimize stabilization of polyacrylonitrile (PAN) fibers

(2020) Spyridon Soulis et al.   POLYMERS FOR ADVANCED TECHNOLOGIES

Enhancement in mechanical properties of polyamide 66-carbon fiber composites containing graphene oxide-carbon nanotube hybrid nanofillers synthesized through in situ interfacial polymerization

(2020) Beom-Gon Cho et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Introduction of a Methodology to Enhance the Stabilization Process of PAN Fibers by Modeling and Advanced Characterization

(2020) George Konstantopoulos et al.   Materials

Evolution of structural inhomogeneity in polyacrylonitrile fibers by oxidative stabilization

(2020) Jiwon Choi et al.   CARBON

Effect of amorphous carbon on the tensile behavior of polyacrylonitrile (PAN)-based carbon fibers

(2019) Fenghao Yang et al.   JOURNAL OF MATERIALS SCIENCE

A study on the microstructural changes and mechanical behaviors of carbon fibers induced by optimized electrochemical etching

(2019) Kwan-Woo Kim et al.   COMPOSITES PART B-ENGINEERING

Electrochemical modification of carbon fiber yarns in cementitious pore solution for an enhanced interaction towards concrete matrices

(2019) Huanyu Li et al.   APPLIED SURFACE SCIENCE

A two-step carbon fiber surface treatment and its effect on the interfacial properties of CF/EP composites: The electrochemical oxidation followed by grafting of silane coupling agent

(2019) Zhangping Wen et al.   APPLIED SURFACE SCIENCE

Generation and characterization of carbon fiber microstructures by atomistic simulations

(2019) Kaushik Joshi et al.   CARBON

Microstructure and properties of polyacrylonitrile based carbon fibers

(2019) Junshan Lu et al.   POLYMER TESTING

Investigating nanostructures in carbon fibres using Raman spectroscopy

(2018) Haruki Okuda et al.   CARBON

Molecular and thermal studies of carbon fiber precursor polymers with low thermal-oxidative stabilization characteristics

(2018) G. Santhana Krishnan et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Effect of acrylonitrile sequence distribution on the thermal stabilization reactions and carbon yields of poly(acrylonitrile-co-methyl acrylate)

(2018) Jian Hao et al.   POLYMER DEGRADATION AND STABILITY

Microwave treatment of pre-oxidized fibers for improving their structure and mechanical properties

(2018) Jianhua Liu et al.   CERAMICS INTERNATIONAL

Effect of boron doping on the electrical conductivity of metallicity-separated single walled carbon nanotubes

(2018) Kazunori Fujisawa et al.   Nanoscale

Evaluation of the effect of PyC coating thickness on the mechanical properties of T700 carbon fiber tows

(2018) Ting Zhang et al.   APPLIED SURFACE SCIENCE

Fabrication of low-cost carbon fibers using economical precursors and advanced processing technologies

(2018) Dalsu Choi et al.   CARBON

Molecular modeling of the microstructure evolution during carbon fiber processing

(2017) Saaketh Desai et al.   JOURNAL OF CHEMICAL PHYSICS

A reconsideration of the relationship between structural features and mechanical properties of carbon fibers

(2017) Denghua Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Evolution of radial heterogeneity in polyacrylonitrile fibres during thermal stabilization: An overview

(2017) Srinivas Nunna et al.   POLYMER DEGRADATION AND STABILITY

Carbonization with Misfusion: Fundamental Limits of Carbon-Fiber Strength Revisited

(2016) Nitant Gupta et al.   ADVANCED MATERIALS

New insights into orientation distribution of high strength polyacrylonitrile-based carbon fibers with skin-core structure

(2016) Xinshuang Guo et al.   CARBON

Tensile failure phenomena in carbon fibres

(2016) Haruki Okuda et al.   CARBON

Surface structures of PAN-based carbon fibers and their influences on the interface formation and mechanical properties of carbon-carbon composites

(2016) Shuai Wu et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Processing, structure, and properties of carbon fibers

(2016) Bradley A. Newcomb   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

High-resolution imaging of the nanostructured surface of polyacrylonitrile-based fibers

(2016) Christina Kunzmann et al.   JOURNAL OF MATERIALS SCIENCE

Characterisation of CVD carbon coatings on NextelTM440 fibres

(2016) Y. Wang et al.   SURFACE ENGINEERING

Effects of oxygen content in the atmosphere on thermal oxidative stabilization of polyacrylonitrile fibers

(2016) Jing Wang et al.   RSC Advances

Strengthened PAN-based carbon fibers obtained by slow heating rate carbonization

(2016) Min-A Kim et al.   Scientific Reports

Basic structural units in carbon fibers: Atomistic models and tensile behavior

(2015) Evgeni S. Penev et al.   CARBON

High strength and high modulus carbon fibers

(2015) Han Gi Chae et al.   CARBON

Two step microwave plasma carbonization including low plasma power pre-carbonization for polyacrylonitrile based carbon fiber

(2015) Seong Yun Kim et al.   POLYMER

Boron-doped onion-like carbon with enriched substitutional boron: the relationship between electronic properties and catalytic performance

(2015) Yangming Lin et al.   Journal of Materials Chemistry A

Tensile strength distribution of carbon fibers at short gauge lengths

(2014) J. Watanabe et al.   ADVANCED COMPOSITE MATERIALS

Influence of surface defects on the tensile strength of carbon fibers

(2014) F. Vautard et al.   APPLIED SURFACE SCIENCE

Young’s modulus, thermal conductivity, electrical resistivity and coefficient of thermal expansion of mesophase pitch-based carbon fibers

(2014) Francisco G. Emmerich   CARBON

Evaluation of fiber surface treatment on the interfacial behavior of carbon fiber-reinforced polypropylene composites

(2014) Song Hee Han et al.   COMPOSITES PART B-ENGINEERING

Reduction in tensile strength of polyacrylonitrile-based carbon fibers in liquids and its application to defect analysis

(2013) Masatoshi Shioya et al.   CARBON

Microstructural evolution and oxidation resistance of polyacrylonitrile-based carbon fibers doped with boron by the decomposition of B4C

(2013) Huiqi Wang et al.   CARBON

The effect of high-temperature vapor deposition polymerization of polyimide coating on tensile properties of polyacrylonitrile- and pitch-based carbon fibers

(2013) Kimiyoshi Naito   JOURNAL OF MATERIALS SCIENCE

Effect of the oxygen-induced modification of polyacrylonitrile fibers during thermal-oxidative stabilization on the radial microcrystalline structure of the resulting carbon fibers

(2013) Yan Xue et al.   POLYMER DEGRADATION AND STABILITY

Degradation and Healing Mechanisms of Carbon Fibers during the Catalytic Growth of Carbon Nanotubes on Their Surfaces

(2012) Kyoung Ju Kim et al.   ACS Applied Materials & Interfaces

A comparison of the effect of graphitization on microstructures and properties of polyacrylonitrile and mesophase pitch-based carbon fibers

(2012) Xianying Qin et al.   CARBON

Improved tensile strength of carbon fibers undergoing catalytic growth of carbon nanotubes on their surface

(2012) Kyoung Ju Kim et al.   CARBON

The effect of grain size on the lattice thermal conductivity of an individual polyacrylonitrile-based carbon fiber

(2012) L. Qiu et al.   CARBON

Anodic Oxidation on Structural Evolution and Tensile Properties of Polyacrylonitrile Based Carbon Fibers with Different Surface Morphology

(2012) Zhaorui Li et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Effect of heating and stretching polyacrylonitrile precursor fibers in steam on the properties of stabilized fibers and carbon fibers

(2012) Xianying Qin et al.   POLYMER ENGINEERING AND SCIENCE

Improving preferred orientation and mechanical properties of PAN-based carbon fibers by pretreating precursor fibers in nitrogen

(2011) Xianying Qin et al.   CARBON

High-temperature vapor deposition polymerization polyimide coating for elimination of surface nano-flaws in high-strength carbon fiber

(2011) Tamaki Naganuma et al.   CARBON

A small-angle X-ray scattering study and molecular dynamics simulation of microvoid evolution during the tensile deformation of carbon fibers

(2011) Caizhen Zhu et al.   CARBON

The effect of gauge length on tensile strength and Weibull modulus of polyacrylonitrile (PAN)- and pitch-based carbon fibers

(2011) Kimiyoshi Naito et al.   JOURNAL OF MATERIALS SCIENCE

Further investigation on boric acid catalytic graphitization of polyacrylonitrile carbon fibers: Mechanism and mechanical properties

(2011) Ya Wen et al.   MATERIALS & DESIGN

Correlation between graphite crystallite distribution morphology and the mechanical properties of carbon fiber during heat treatment

(2011) Aijun Gao et al.   MATERIALS LETTERS

Interfacial and mechanical properties of carbon fibers modified by electrochemical oxidation in (NH4HCO3)/(NH4)2C2O4·H2O aqueous compound solution

(2010) Jie Liu et al.   APPLIED SURFACE SCIENCE

Synthesis of boron-doped double-walled carbon nanotubes by the catalytic decomposition of tetrahydrofuran and triisopropyl borate

(2010) S.C. Lyu et al.   CARBON

The effect of a compliant polyimide nanocoating on the tensile properties of a high strength PAN-based carbon fiber

(2009) Tamaki Naganuma et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Effect of Atmospheres on Stabilization of Polyacrylonitrile Fibers

(2009) Tongqing Sun et al.   Journal of Macromolecular Science Part A-Pure and Applied Chemistry

Continuous Nanoscale Carbon Fibers with Superior Mechanical Strength

(2009) Jie Liu et al.   Small

Tensile strength and its variation of PAN-based carbon fibers. III. Weak-link analysis

(2008) Jiangwei Yao et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Effect of microstructure on the mechanical properties of PAN-based carbon fibers during high-temperature graphitization

(2008) Fujie Liu et al.   JOURNAL OF MATERIALS SCIENCE

Making Strong Fibers

(2008) Han Gi Chae et al.   SCIENCE

Tensile properties of ultrahigh strength PAN-based, ultrahigh modulus pitch-based and high ductility pitch-based carbon fibers

(2007) Kimiyoshi Naito et al.   CARBON