High-strength, porous additively manufactured implants with optimized mechanical osseointegration

Functional repair of critically sized femoral defects treated with bioinspired titanium gyroid-sheet scaffolds

(2021) Cambre N. Kelly et al.   Journal of the Mechanical Behavior of Biomedical Materials

In-Vivo response to a novel pillared surface morphology for osseointegration in an ovine model

(2021) Gregory C. Causey et al.   Journal of the Mechanical Behavior of Biomedical Materials

Bone ongrowth and mechanical fixation of implants in cortical and cancellous bone

(2020) William Robert Walsh et al.   Journal of Orthopaedic Surgery and Research

Compressive anisotropy of sheet and strut based porous Ti–6Al–4V scaffolds

(2020) Helena Barber et al.   Journal of the Mechanical Behavior of Biomedical Materials

Fatigue Behavior of As-Built Selective Laser Melted Titanium Scaffolds with Sheet-based Gyroid Microarchitecture for Bone Tissue Engineering

(2019) Cambre N. Kelly et al.   Acta Biomaterialia

Additive manufacturing of biodegradable metals: Current research status and future perspectives

(2019) Yu Qin et al.   Acta Biomaterialia

The effect of surface topography and porosity on the tensile fatigue of 3D printed Ti-6Al-4V fabricated by selective laser melting

(2019) Cambre N. Kelly et al.   Materials Science & Engineering C-Materials for Biological Applications

Multifunctional mechanical‐metamaterials based on triply periodic minimal surface lattices: A review

(2019) Oraib Al-Ketan et al.   ADVANCED ENGINEERING MATERIALS

Does implantation site influence bone ingrowth into 3D-printed porous implants?

(2019) William R. Walsh et al.   Spine Journal

Functionally graded and multi-morphology sheet TPMS lattices: Design, manufacturing, and mechanical properties

(2019) Oraib Al-Ketan et al.   Journal of the Mechanical Behavior of Biomedical Materials

Substrate curvature as a cue to guide spatiotemporal cell and tissue organization

(2019) Sebastien J.P. Callens et al.   BIOMATERIALS

Additively manufactured biodegradable porous iron

(2018) Y. Li et al.   Acta Biomaterialia

Use of Patient-Specific 3D-Printed Titanium Implants for Complex Foot and Ankle Limb Salvage, Deformity Correction, and Arthrodesis Procedures

(2018) Travis J. Dekker et al.   FOOT & ANKLE INTERNATIONAL

The in vivo response to a novel Ti coating compared with polyether ether ketone: evaluation of the periphery and inner surfaces of an implant

(2018) William Robert Walsh et al.   Spine Journal

A TPMS-based method for modeling porous scaffolds for bionic bone tissue engineering

(2018) Jianping Shi et al.   Scientific Reports

Selective laser melting of porosity graded lattice structures for bone implants

(2018) Dalia Mahmoud et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Regulating 3D-printed medical products

(2018) Laura M. Ricles et al.   Science Translational Medicine

Mechanical performance of additively manufactured meta-biomaterials

(2018) Amir A. Zadpoor   Acta Biomaterialia

Mechanics of additively manufactured biomaterials

(2017) Amir A. Zadpoor   Journal of the Mechanical Behavior of Biomedical Materials

Design and Structure-Function Characterization of 3D Printed Synthetic Porous Biomaterials for Tissue Engineering

(2017) Cambre N. Kelly et al.   Advanced Healthcare Materials

Salvage of Severe Foot and Ankle Trauma With a 3D Printed Scaffold

(2016) Kamran S. Hamid et al.   FOOT & ANKLE INTERNATIONAL

Osseointegration of Multiphase Anodic Spark Deposition Treated Porous Titanium Implants in an Ovine Model

(2015) Nicky Bertollo et al.   JOURNAL OF ARTHROPLASTY

Transdermal fentanyl and its use in ovine surgery

(2015) Chris Christou et al.   RESEARCH IN VETERINARY SCIENCE

Plasma-sprayed titanium coating to polyetheretherketone improves the bone-implant interface

(2015) William R. Walsh et al.   Spine Journal

Bone tissue regeneration: the role of scaffold geometry

(2015) Amir A. Zadpoor   Biomaterials Science

Tibiotalocalcaneal Arthrodesis With Bulk Femoral Head Allograft for Salvage of Large Defects in the Ankle

(2013) Clifford L. Jeng et al.   FOOT & ANKLE INTERNATIONAL

Enhanced Bone Regeneration of Cortical Segmental Bone Defects Using Porous Titanium Scaffolds Incorporated with Colloidal Gelatin Gels for Time- and Dose-Controlled Delivery of Dual Growth Factors

(2013) Johan van der Stok et al.   TISSUE ENGINEERING PART A

Influence of Electron Beam Melting Manufactured Implants on Ingrowth and Shear Strength in an Ovine Model

(2012) Nicky Bertollo et al.   JOURNAL OF ARTHROPLASTY

Bone regeneration: current concepts and future directions

(2011) Rozalia Dimitriou et al.   BMC Medicine

Effect of Surgical Fit on Integration of Cancellous Bone and Implant Cortical Bone Shear Strength for a Porous Titanium

(2011) Nicky Bertollo et al.   JOURNAL OF ARTHROPLASTY

Osseointegration of porous titanium implants with and without electrochemically deposited DCPD coating in an ovine model

(2011) Dong Chen et al.   Journal of Orthopaedic Surgery and Research

Osteoinductive ceramics as a synthetic alternative to autologous bone grafting

(2010) H. Yuan et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

The challenge of establishing preclinical models for segmental bone defect research

(2009) Johannes C. Reichert et al.   BIOMATERIALS

Boning up on Wolff's Law: Mechanical regulation of the cells that make and maintain bone

(2009) Jan-Hung Chen et al.   JOURNAL OF BIOMECHANICS

Selective Laser Melting: A regular unit cell approach for the manufacture of porous, titanium, bone in-growth constructs, suitable for orthopedic applications

(2008) Lewis Mullen et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS