Finned heat sinks with phase change materials and metal foams: Pareto optimization to address cost and operation time

Numerical Investigation of a Phase Change Material Including Natural Convection Effects

(2021) Assunta Andreozzi et al.   Energies

Metal foam/PCM melting evolution analysis: Orientation and morphology effects

(2021) Marcello Iasiello et al.   APPLIED THERMAL ENGINEERING

Use of Cuckoo Search Algorithm for Performance Evaluation of Split Elliptic Shaped Fins for Enhanced Rate of Heat Transfer

(2021) Alok Ranjan et al.   JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME

Experimental Study on the Thermal Performance of a Finned Metal Foam Heat Sink with Phase Change Material

(2020) Yongping Huang et al.   HEAT TRANSFER ENGINEERING

A review of the top of the barrier nanotransistor models for semiconductor nanomaterials

(2020) Mu Wen Chuan et al.   SUPERLATTICES AND MICROSTRUCTURES

Estimating magnetic field strength in a porous fin from a surface temperature response

(2020) R. Das et al.   ELECTRONICS LETTERS

Performance improvement of solar thermal systems integrated with phase change materials (PCM), a review

(2020) F.S. Javadi et al.   SOLAR ENERGY

Multi-objective optimization of finned metal foam heat sinks: Tradeoff between heat transfer and pressure drop

(2020) Nicola Bianco et al.   APPLIED THERMAL ENGINEERING

New Forward and Inverse Solutions for Wet Fins Generalized Profiles With All Nonlinear Phenomena

(2020) Ranjan Das et al.   JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME

Studies on optimum fins number in PCM-based heat sinks

(2019) Rasool Kalbasi et al.   ENERGY

Melting performance enhancement of phase change material by a limited amount of metal foam: Configurational optimization and economic assessment

(2018) Yang Xu et al.   APPLIED ENERGY

Transient performance of a PCM-based heat sink with a partially filled metal foam: Effects of the filling height ratio

(2018) Zi-Qin Zhu et al.   APPLIED THERMAL ENGINEERING

Multi-objective optimization of turbulent heat transfer flow in novel outward helically corrugated tubes

(2018) Wei Wang et al.   APPLIED THERMAL ENGINEERING

Natural convection in metal foam heat sinks with open slots

(2018) Shangsheng Feng et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Experimental investigation on paraffin wax integrated with copper foam based heat sinks for electronic components thermal cooling

(2018) Tauseef-ur- Rehman et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Experimental and numerical investigation of low melting point metal based PCM heat sink with internal fins

(2017) Xiao-Hu Yang et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Optimal design of plate-fin heat exchanger by combining multi-objective algorithms

(2017) Tariq Amin Khan et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

A differential evolution algorithm for maximizing heat dissipation in stepped fins

(2017) Rohit K. Singla et al.   NEURAL COMPUTING & APPLICATIONS

Estimation of feasible materials and thermal conditions in a trapezoidal fin using genetic algorithm

(2016) Ranjan Das   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING

Multi-objective geometric optimization of a PCM based matrix type composite heat sink

(2015) R. Srikanth et al.   APPLIED ENERGY

Pore-scale and volume-averaged numerical simulations of melting phase change heat transfer in finned metal foam

(2015) Shangsheng Feng et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Experimental analysis of phase change phenomenon of paraffin waxes embedded in copper foams

(2015) Simone Mancin et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

Heat Transfer and Pressure Drop Characteristics of Finned Metal Foam Heat Sinks Under Uniform Impinging Flow

(2015) S. S. Feng et al.   JOURNAL OF ELECTRONIC PACKAGING

Thermal-economic multi-objective optimization of shell and tube heat exchanger using particle swarm optimization (PSO)

(2014) A. Ghanei et al.   HEAT AND MASS TRANSFER

An experimental and numerical study of finned metal foam heat sinks under impinging air jet cooling

(2014) S.S. Feng et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Numerical Investigation of PCM Based Heat Sinks with Embedded Metal Foam/Crossed Plate Fins

(2014) P. V. S. S. Srivatsa et al.   NUMERICAL HEAT TRANSFER PART A-APPLICATIONS

Experimental study of buoyancy-driven flow in open-cell aluminium foam heat sinks

(2013) Sven De Schampheleire et al.   APPLIED THERMAL ENGINEERING

A Neural Network-Based Optimization Of Thermal Performance Of Phase Change Material-Based Finned Heat Sinks—An Experimental Study

(2013) R. Baby et al.   EXPERIMENTAL HEAT TRANSFER

Modeling phase change material in micro-foam under constant temperature condition

(2013) Xin Hu et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Effects of melting temperature and the presence of internal fins on the performance of a phase change material (PCM)-based heat sink

(2013) Li-Wu Fan et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

Multi-objective optimization design of plate-fin heat sinks using a direction-based genetic algorithm

(2013) Chyi-Tsong Chen et al.   Journal of the Taiwan Institute of Chemical Engineers

Multi-objective design optimization of a micro heat sink for Concentrating Photovoltaic/Thermal (CPVT) systems using a genetic algorithm

(2012) Ioannis K. Karathanassis et al.   APPLIED THERMAL ENGINEERING

Passive thermal management using metal foam saturated with phase change material in a heat sink

(2012) Z.G. Qu et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Benefits of metal foams and developments in modelling techniques to assess their materials behaviour: a review

(2012) C Betts   MATERIALS SCIENCE AND TECHNOLOGY

Energy and cost optimization of a plate and fin heat exchanger using genetic algorithm

(2011) Hamidreza Najafi et al.   APPLIED THERMAL ENGINEERING

Experimental and numerical studies on melting phase change heat transfer in open-cell metallic foams filled with paraffin

(2011) W.Q. Li et al.   APPLIED THERMAL ENGINEERING

A simplex search method for a conductive–convective fin with variable conductivity

(2011) Ranjan Das   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Experimental investigations on phase change material based finned heat sinks for electronic equipment cooling

(2011) Rajesh Baby et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Multi-objective thermal design optimization and comparative analysis of electronics cooling technologies

(2009) Sidy Ndao et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

An inverse analysis of a transient 2-D conduction–radiation problem using the lattice Boltzmann method and the finite volume method coupled with the genetic algorithm

(2008) Ranjan Das et al.   JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER

Transient cooling of electronics using phase change material (PCM)-based heat sinks

(2007) Ravi Kandasamy et al.   APPLIED THERMAL ENGINEERING