Combined effect of using porous media and nano-particle on melting performance of PCM filled enclosure with triangular double fins

Metal foam/PCM melting evolution analysis: Orientation and morphology effects

(2021) Marcello Iasiello et al.   APPLIED THERMAL ENGINEERING

The effect of magnetic field on the performance improvement of a conventional solar still: a numerical study

(2021) Mohammad Mehdizadeh Youshanlouei et al.   ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH

Numerical analysis on heat transfer of a pyramid-shaped photovoltaic panel

(2021) Nidal H. Abu-Hamdeh et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Assessment of FRP–Concrete Interfacial Debonding with Coupled Mixed-Mode Cohesive Zone Model

(2021) Wei Zhang et al.   JOURNAL OF COMPOSITES FOR CONSTRUCTION

Examining effects of special heat transfer fins designed for the melting process of PCM and Nano-PCM

(2020) Besir Kok   APPLIED THERMAL ENGINEERING

Bonding behavior between reactive powder concrete and normal strength concrete

(2020) Yanzhong Ju et al.   CONSTRUCTION AND BUILDING MATERIALS

Performance of a novel-type of heat flue in a coke oven based on high-temperature and low-oxygen diffusion combustion technology

(2020) Qian Xu et al.   FUEL

Wide-field high-resolution 3D microscopy with Fourier ptychographic diffraction tomography

(2020) Chao Zuo et al.   OPTICS AND LASERS IN ENGINEERING

On a universal solution to the transport-of-intensity equation

(2020) Jialin Zhang et al.   OPTICS LETTERS

Investigation of heat transfer mechanisms among particles in horizontal rotary retorts

(2020) Qing Wang et al.   POWDER TECHNOLOGY

Near‐Infrared Chemiluminescent Carbon Nanodots and Their Application in Reactive Oxygen Species Bioimaging

(2020) Cheng‐Long Shen et al.   Advanced Science

Transport of intensity equation: a tutorial

(2020) Chao Zuo et al.   OPTICS AND LASERS IN ENGINEERING

Microscopic fringe projection profilometry: A review

(2020) Yan Hu et al.   OPTICS AND LASERS IN ENGINEERING

Wear and heat shock resistance of Ni-WC coating on mould copper plate fabricated by laser

(2020) Yu Liu et al.   Journal of Materials Research and Technology-JMR&T

Thermal performance analysis of phase change materials (PCMs) embedded in gradient porous metal foams

(2020) Ali Ghahremannezhad et al.   APPLIED THERMAL ENGINEERING

A superhydrophobic/electrothermal synergistically anti-icing strategy based on graphene composite

(2020) Peng Wang et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Structure design of MoS2@Mo2C on nitrogen-doped carbon for enhanced alkaline hydrogen evolution reaction

(2020) Lina Jia et al.   Journal of Materials Science

Graphite foam infiltration with mixed chloride salts as PCM for high-temperature latent heat storage applications

(2020) Hao Lan et al.   SOLAR ENERGY

Coordinated Bidding Strategy of Wind Farms and Power-to-Gas Facilities Using a Cooperative Game Approach

(2020) Rufeng Zhang et al.   IEEE Transactions on Sustainable Energy

Experimental and numerical investigations on the effect of porosity and PPI gradients of metal foams on the thermal performance of a composite phase change material heat sink

(2020) Girish Kumar Marri et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Pyrolysis temperature effect on compositions of basic nitrogen species in Huadian shale oil using positive-ion ESI FT-ICR MS and GC-NCD

(2020) Da Cui et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Nanoparticle enhanced PCM exergy loss and thermal behavior by means of FVM

(2020) Yu-Ming Chu et al.   JOURNAL OF MOLECULAR LIQUIDS

Influence of wavy enclosure and nanoparticles on heat release rate of PCM considering numerical study

(2020) Yu-Ming Chu et al.   JOURNAL OF MOLECULAR LIQUIDS

Effect analysis on thermal behavior enhancement of lithium–ion battery pack with different cooling structures

(2020) Jianguo Wang et al.   Journal of Energy Storage

Experimental case studies of the effect of Al2O3 and MWCNTs nanoparticles on heating and cooling of PCM

(2020) Muhammad Aqib et al.   Case Studies in Thermal Engineering

Gradation Segregation Characteristic and Its Impact on Performance of Asphalt Mixture

(2020) Huanan Yu et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

Numerical analysis of higher order chemical reaction on electrically MHD nanofluid under influence of viscous dissipation

(2020) D. Gopal et al.   Alexandria Engineering Journal

Melting performance enhancement of thermal storage system by utilizing shape and position of double fin

(2020) Nazaruddin Sinaga et al.   Case Studies in Thermal Engineering

Novel and efficient synthesis of Ag-ZnO nanoparticles for the sunlight-induced photocatalytic degradation

(2019) Yutong Liu et al.   APPLIED SURFACE SCIENCE

Influence of NbC particles on microstructure and mechanical properties of AlCoCrFeNi high-entropy alloy coatings prepared by laser cladding

(2019) Xiaofeng Li et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Experimental analysis of Transient melting process in a horizontal cavity with different configurations of fins

(2019) M.H. Joneidi et al.   RENEWABLE ENERGY

Enhanced Photoresponsivity of a GaAs Nanowire Metal-Semiconductor-Metal Photodetector by Adjusting the Fermi Level

(2019) Xue Chen et al.   ACS Applied Materials & Interfaces

Discharge of a composite metal foam/phase change material to air heat exchanger for a domestic thermal storage unit

(2019) Pouyan Talebizadeh Sardari et al.   RENEWABLE ENERGY

Solidification enhancement with multiple PCMs, cascaded metal foam and nanoparticles in the shell-and-tube energy storage system

(2019) Jasim M. Mahdi et al.   APPLIED ENERGY

Effect of porous medium and nanoparticles presences in a counter-current triple-tube composite porous/nano-PCM system

(2019) Zhixiong Li et al.   APPLIED THERMAL ENGINEERING

Numerical study of a multiple-segment metal foam-PCM latent heat storage unit: Effect of porosity, pore density and location of heat source

(2019) Pouyan Talebizadeh Sardari et al.   ENERGY

Numerical investigation on optimal number of longitudinal fins in horizontal annular phase change unit at different wall temperatures

(2018) Xiaoling Cao et al.   ENERGY AND BUILDINGS

Investigation of fin application effects on melting time in a latent thermal energy storage system with phase change material (PCM)

(2018) Adem Acır et al.   APPLIED THERMAL ENGINEERING

Simulation on PCM melting enhancement with double-fin length arrangements in a rectangular enclosure induced by natural convection

(2018) Chenzhen Ji et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Numerical simulation of effective thermal conductivity and pore-scale melting process of PCMs in foam metals

(2018) Gang Wang et al.   APPLIED THERMAL ENGINEERING

Heat transfer behavior of nanoparticle enhanced PCM solidification through an enclosure with V shaped fins

(2018) M. Sheikholeslami et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Numerical study of thermally optimized metal structures in a Phase Change Material (PCM) enclosure

(2018) Jinlong Xie et al.   APPLIED THERMAL ENGINEERING

Numerical investigation of melting in a cavity with vertically oriented fins

(2018) Amir Abdi et al.   APPLIED ENERGY

Melting of nanoparticle-enhanced paraffin wax in a rectangular enclosure with partially active walls

(2017) Müslüm Arıcı et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

High-resolution transport-of-intensity quantitative phase microscopy with annular illumination

(2017) Chao Zuo et al.   Scientific Reports

Melting and solidification of PCM enhanced by radial conductive fins and nanoparticles in cylindrical annulus

(2016) A. Ali Rabienataj Darzi et al.   ENERGY CONVERSION AND MANAGEMENT

Advanced energy storage materials for building applications and their thermal performance characterization: A review

(2016) Tumirah Khadiran et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Heat transfer characteristics of a molten-salt thermal energy storage unit with and without heat transfer enhancement

(2015) P. Zhang et al.   APPLIED ENERGY

Transport of intensity phase retrieval and computational imaging for partially coherent fields: The phase space perspective

(2015) Chao Zuo et al.   OPTICS AND LASERS IN ENGINEERING

Experimental investigation of the effect of inclination angle on convection-driven melting of phase change material in a rectangular enclosure

(2014) Babak Kamkari et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Numerical modeling for solid–liquid phase change phenomena in porous media: Shell-and-tube type latent heat thermal energy storage

(2013) Zhenyu Liu et al.   APPLIED ENERGY

Experimental investigation on melting heat transfer characteristics of lauric acid in a rectangular thermal storage unit

(2013) Hossein Shokouhmand et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

High-speed three-dimensional shape measurement for dynamic scenes using bi-frequency tripolar pulse-width-modulation fringe projection

(2013) Chao Zuo et al.   OPTICS AND LASERS IN ENGINEERING

A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS)

(2009) Francis Agyenim et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS