3D Printing of Multilayered and Multimaterial Electronics: A Review

Direct Ink Writing of Materials for Electronics-Related Applications: A Mini Review

(2021) Zhenzhong Hou et al.   Frontiers in Materials

Direct 3D Printing of Highly Anisotropic, Flexible, Constriction-Resistive Sensors for Multidirectional Proprioception in Soft Robots

(2020) Saeb Mousavi et al.   ACS Applied Materials & Interfaces

Inkjet Printable Polydimethylsiloxane for All-Inkjet-Printed Multilayered Soft Electrical Applications

(2020) Riikka Mikkonen et al.   ACS Applied Materials & Interfaces

Nanomaterial Patterning in 3D Printing

(2020) Brian Elder et al.   ADVANCED MATERIALS

A Review on Intense Pulsed Light Sintering Technologies for Conductive Electrodes in Printed Electronics

(2020) Yong-Rae Jang et al.   International Journal of Precision Engineering and Manufacturing-Green Technology

Poly(lactic acid)-Based Ink for Biodegradable Printed Electronics With Conductivity Enhanced through Solvent Aging

(2020) Madhur Atreya et al.   ACS Applied Materials & Interfaces

Numerical simulation of aerosol dynamics in an impinging jet with microdroplet coalescence

(2020) Jiandong Wu et al.   AEROSOL SCIENCE AND TECHNOLOGY

Enhancing intense pulsed light sintering characteristic of Cu nanoparticle/microparticle-ink using ultraviolet surface modification on polyimide substrate

(2020) Chung-Hyeon Ryu et al.   THIN SOLID FILMS

Direct printing of performance tunable strain sensor via nanoparticle laser patterning process

(2020) Ji-Hyeon Song et al.   Virtual and Physical Prototyping

Polyimide films tailored by UV irradiation: Surface evaluation and structure-properties relationship

(2020) Radu-Dan Rusu et al.   POLYMER DEGRADATION AND STABILITY

Direct Ink Writing Based 4D Printing of Materials and Their Applications

(2020) Xue Wan et al.   Advanced Science

An outlook on printed microsupercapacitors: Technology status, remaining challenges, and opportunities

(2020) J. Coelho et al.   Current Opinion in Electrochemistry

Surface modification of fused filament fabrication (FFF) 3D printed substrates by inkjet printing polyimide for printed electronics

(2020) Devin J. Roach et al.   Additive Manufacturing

Directed and On-Demand Alignment of Carbon Nanotube: A Review toward 3D Printing of Electronics

(2019) Guo Liang Goh et al.   Advanced Materials Interfaces

Ultrathin Fully Printed Light-Emitting Electrochemical Cells with Arbitrary Designs on Biocompatible Substrates

(2019) Johannes Zimmermann et al.   Advanced Materials Technologies

Evaporation induced hollow cracks and the adhesion of silver nanoparticle film

(2019) Ruiqiang Tao et al.   JOURNAL OF MATERIALS SCIENCE

Dynamics of Liquid Transfer from Nanoporous Stamps in High-Resolution Flexographic Printing

(2019) Dhanushkodi Mariappan et al.   LANGMUIR

3D Printed Sensors for Biomedical Applications: A Review

(2019) Tao Han et al.   SENSORS

3D Printing of Freestanding MXene Architectures for Current‐Collector‐Free Supercapacitors

(2019) Wenji Yang et al.   ADVANCED MATERIALS

A review of aerosol jet printing—a non-traditional hybrid process for micro-manufacturing

(2019) N. J. Wilkinson et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Laser sintering process optimization of microstrip antenna fabricated by inkjet printing with silver-based MOD ink

(2019) Pengbing Zhao et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Additive-free MXene inks and direct printing of micro-supercapacitors

(2019) Chuanfang Zhang et al.   Nature Communications

3D Printed Electronics of Non-contact Ink Writing Techniques: Status and Promise

(2019) Haining Zhang et al.   International Journal of Precision Engineering and Manufacturing-Green Technology

All-printed multilayer high voltage capacitors with integrated processing feedback

(2019) James O. Hardin et al.   Additive Manufacturing

Screen-Printing of a Highly Conductive Graphene Ink for Flexible Printed Electronics

(2019) Pei He et al.   ACS Applied Materials & Interfaces

Fully printed organic solar cells – a review of techniques, challenges and their solutions

(2019) S. Ganesan et al.   OPTO-ELECTRONICS REVIEW

Metal−Organic Decomposition Ink for Printed Electronics

(2019) Yejung Choi et al.   Advanced Materials Interfaces

A versatile PDMS submicrobead/graphene oxide nanocomposite ink for the direct ink writing of wearable micron-scale tactile sensors

(2019) Ge Shi et al.   Applied Materials Today

Aerosol-Jet-Printed Preferentially Aligned Carbon Nanotube Twin-Lines for Printed Electronics

(2019) Guo Liang Goh et al.   ACS Applied Materials & Interfaces

A New Frontier of Printed Electronics: Flexible Hybrid Electronics

(2019) Yasser Khan et al.   ADVANCED MATERIALS

Induction Sintering of Silver Nanoparticle Inks on Polyimide Substrates

(2019) Hong Wei Tan et al.   Advanced Materials Technologies

Conformal Additive Manufacturing using a Direct-Print Process

(2019) Faez Alkadi et al.   Additive Manufacturing

3D Printing of Additive-Free 2D Ti3C2Tx (MXene) Ink for Fabrication of Micro-Supercapacitors with Ultra-High Energy Densities

(2019) Jafar Orangi et al.   ACS Nano

Tailoring the surface morphology and nanoparticle distribution of laser-induced graphene/Co3O4 for high-performance flexible microsupercapacitors

(2019) Wentao Wang et al.   APPLIED SURFACE SCIENCE

3D printing for electroanalysis: From multiuse electrochemical cells to sensors

(2018) Rafael M. Cardoso et al.   ANALYTICA CHIMICA ACTA

Back-irradiation photonic sintering for defect-free high-conductivity metal patterns on transparent plastic

(2018) Ji Hye Kwak et al.   APPLIED PHYSICS LETTERS

Drop-on-demand satellite-free drop formation for precision fluid delivery

(2018) Lisong Yang et al.   CHEMICAL ENGINEERING SCIENCE

Functional inks and printing of two-dimensional materials

(2018) Guohua Hu et al.   CHEMICAL SOCIETY REVIEWS

Predictive Modeling of Droplet Formation Processes in Inkjet-Based Bioprinting

(2018)   JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME

Controlling the polymer ink's rheological properties and viscoelasticity to suppress satellite droplets

(2018) Zhonghui Du et al.   POLYMER

A low cost and flexible carbon nanotube pH sensor fabricated using aerosol jet technology for live cell applications

(2018) Guo Liang Goh et al.   SENSORS AND ACTUATORS B-CHEMICAL

Preliminary Investigation of Poly-Ether-Ether-Ketone Based on Fused Deposition Modeling for Medical Applications

(2018) Feng Zhao et al.   Materials

Thermal Dynamics Effects using Pulse-Shaping Laser Sintering of Printed Silver Inks

(2018) M. Bolduc et al.   Scientific Reports

Design and fabrication of multilayer inkjet-printed passive components for printed electronics circuit development

(2018) V. Correia et al.   Journal of Manufacturing Processes

Three-dimensional monolithic integration in flexible printed organic transistors

(2018) Jimin Kwon et al.   Nature Communications

Wearable Bandage-Based Strain Sensor for Home Healthcare: Combining 3D Aerosol Jet Printing and Laser Sintering

(2018) Shweta Agarwala et al.   ACS Sensors

Additively manufactured multi-material free-form structure with printed electronics

(2017) Guo Liang Goh et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Inorganic nanomaterials for printed electronics: a review

(2017) Wei Wu   Nanoscale

Controlling the crack formation in inkjet-printed silver nanoparticle thin-films for high resolution patterning using intense pulsed light treatment

(2017) Pritesh Gokhale et al.   NANOTECHNOLOGY

3D printing of multiaxial force sensors using carbon nanotube (CNT)/thermoplastic polyurethane (TPU) filaments

(2017) Kyuyoung Kim et al.   SENSORS AND ACTUATORS A-PHYSICAL

Effect of reactive oxygen species generated with ultraviolet lamp and plasma on polyimide surface modification

(2017) Takahiro Kondo et al.   SURFACE AND INTERFACE ANALYSIS

Fully inkjet-printed two-dimensional material field-effect heterojunctions for wearable and textile electronics

(2017) Tian Carey et al.   Nature Communications

Aerosol-Jet Printing of Polymer-Sorted (6,5) Carbon Nanotubes for Field-Effect Transistors with High Reproducibility

(2017) Marcel Rother et al.   Advanced Electronic Materials

3D Printed Electronics With High Performance, Multi-Layered Electrical Interconnect

(2017) Chiyen Kim et al.   IEEE Access

All-Printed Solid-State Microsupercapacitors Derived from Self-Template Synthesis of Ag@PPy Nanocomposites

(2017) Li Liu et al.   Advanced Materials Technologies

3D Inkjet Printing of Electronics Using UV Conversion

(2017) Ehab Saleh et al.   Advanced Materials Technologies

Adhesive Stretchable Printed Conductive Thin Film Patterns on PDMS Surface with an Atmospheric Plasma Treatment

(2016) Chun-Yi Li et al.   ACS Applied Materials & Interfaces

Fully Screen-Printed, Large-Area, and Flexible Active-Matrix Electrochromic Displays Using Carbon Nanotube Thin-Film Transistors

(2016) Xuan Cao et al.   ACS Nano

Recent Progress in the Development of Printed Thin-Film Transistors and Circuits with High-Resolution Printing Technology

(2016) Kenjiro Fukuda et al.   ADVANCED MATERIALS

Graphene Oxide-Based Electrode Inks for 3D-Printed Lithium-Ion Batteries

(2016) Kun Fu et al.   ADVANCED MATERIALS

A laser printing based approach for printed electronics

(2016) T. Zhang et al.   APPLIED PHYSICS LETTERS

Direct laser writing for creating porous graphitic structures and their use for flexible and highly sensitive sensor and sensor arrays

(2016) Sida Luo et al.   CARBON

Surface analysis of polymeric substrates used for inkjet printing technology

(2016) Alena Pietrikova et al.   CIRCUIT WORLD

Surface properties of glass plates activated by air, oxygen, nitrogen and argon plasma

(2016) Konrad Terpilowski et al.   GLASS PHYSICS AND CHEMISTRY

Evaluation of Aerosol, Superfine Inkjet, and Photolithography Printing Techniques for Metallization of Application Specific Printed Electronic Circuits

(2016) Mohammad Mashayekhi et al.   IEEE TRANSACTIONS ON ELECTRON DEVICES

Computational Fluid Dynamics Modeling and Online Monitoring of Aerosol Jet Printing Process

(2016) Roozbeh (Ross) Salary et al.   JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME

Measurement of excited singlet oxygen molecule in a vacuum sterilization system, using electric spin resonance (ESR) with a water-soluble polymer thin film

(2016) Kiyoshi Yoshino et al.   JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY

Use of nanocellulose in printed electronics: a review

(2016) Fanny Hoeng et al.   Nanoscale

Direct laser printing of graphene oxide for resistive chemosensors

(2016) S. Papazoglou et al.   OPTICS AND LASER TECHNOLOGY

Identifying orthogonal solvents for solution processed organic transistors

(2016) Abhinav M. Gaikwad et al.   ORGANIC ELECTRONICS

Flexible screen printed thermoelectric generator with enhanced processes and materials

(2016) Zhuo Cao et al.   SENSORS AND ACTUATORS A-PHYSICAL

Real-time in situ sensing of multiple water quality related parameters using micro-electrode array (MEA) fabricated by inkjet-printing technology (IPT)

(2016) Zhiheng Xu et al.   SENSORS AND ACTUATORS B-CHEMICAL

Large-scale synthesis and screen printing of upconversion hexagonal-phase NaYF4:Yb3+,Tm3+/Er3+/Eu3+ plates for security applications

(2016) Weijing Yao et al.   Journal of Materials Chemistry C

Advanced Materials for Printed Wearable Electrochemical Devices: A Review

(2016) Jayoung Kim et al.   Advanced Electronic Materials

Fully High-Speed Gravure Printed, Low-Variability, High-Performance Organic Polymer Transistors with Sub-5 V Operation

(2016) Gerd Grau et al.   Advanced Electronic Materials

Tailoring the surface wettability of polyimide by UV laser direct texturing in different gas atmospheres

(2016) Qifeng Du et al.   MATERIALS & DESIGN

Inkjet Printing of Silver Nanowire Networks

(2015) David J. Finn et al.   ACS Applied Materials & Interfaces

Recent Advances in Controlling the Depositing Morphologies of Inkjet Droplets

(2015) Jiazhen Sun et al.   ACS Applied Materials & Interfaces

Crystallinity dynamics of gold nanoparticles during sintering or coalescence

(2015) Eirini Goudeli et al.   AICHE JOURNAL

Laser wavelength effect on laser-induced photo-thermal sintering of silver nanoparticles

(2015) Dongwoo Paeng et al.   APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING

Low-Cost Inkjet-Printed Fully Passive RFID Tags for Calibration-Free Capacitive/Haptic Sensor Applications

(2015) Sangkil Kim et al.   IEEE SENSORS JOURNAL

A Fully Inkjet-Printed Wireless and Chipless Sensor for CO2and Temperature Detection

(2015) Arnaud Vena et al.   IEEE SENSORS JOURNAL

Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review

(2015) Saleem Khan et al.   IEEE SENSORS JOURNAL

Mechanism of reverse-offset printing

(2015) Young-Man Choi et al.   JOURNAL OF MICROMECHANICS AND MICROENGINEERING

Fabrication of shape controllable alginate microparticles based on drop-on-demand jetting

(2015) Qing Gao et al.   JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY

Optimization of a reverse-offset printing process and its application to a metal mesh touch screen sensor

(2015) Young-Man Choi et al.   MICROELECTRONIC ENGINEERING

Three-dimensional printed electronics

(2015) Jennifer A. Lewis et al.   NATURE

Resonant-enhanced full-color emission of quantum-dot-based micro LED display technology

(2015) Hau-Vei Han et al.   OPTICS EXPRESS

Polylactic acid as a biodegradable material for all-solution-processed organic electronic devices

(2015) Giorgio Mattana et al.   ORGANIC ELECTRONICS

Fully-Additive Printed Electronics: Transistor model, process variation and fundamental circuit designs

(2015) Xi Zhang et al.   ORGANIC ELECTRONICS

Uniform Aerosol Jet printed polymer lines with 30μm width for 140ppi resolution RGB organic light emitting diodes

(2015) Jeffrey G. Tait et al.   ORGANIC ELECTRONICS

Role of water in TiO 2 screen-printing inks for dye-sensitized solar cells

(2015) Riccardo Bendoni et al.   SOLAR ENERGY

Sessile drop deformations under an impinging jet

(2015) James Q. Feng   THEORETICAL AND COMPUTATIONAL FLUID DYNAMICS

Screen printed passive components for flexible power electronics

(2015) Aminy E. Ostfeld et al.   Scientific Reports

Reverse-Offset Printing Optimized for Scalable Organic Thin-Film Transistors with Submicrometer Channel Lengths

(2015) Kenjiro Fukuda et al.   Advanced Electronic Materials

Patterned Surface with Controllable Wettability for Inkjet Printing of Flexible Printed Electronics

(2014) Phuong Q. M. Nguyen et al.   ACS Applied Materials & Interfaces

High-Resolution Patterning of Graphene by Screen Printing with a Silicon Stencil for Highly Flexible Printed Electronics

(2014) Woo Jin Hyun et al.   ADVANCED MATERIALS

Gravure Printing of Graphene for Large-area Flexible Electronics

(2014) Ethan B. Secor et al.   ADVANCED MATERIALS

3D Printing multifunctionality: structures with electronics

(2014) David Espalin et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Modification of the PTFE wettability by oxygen plasma treatments: influence of the operating parameters and investigation of the ageing behaviour

(2014) Stefano Zanini et al.   JOURNAL OF PHYSICS D-APPLIED PHYSICS

Control over Coffee-Ring Formation in Evaporating Liquid Drops Containing Ellipsoids

(2014) Venkateshwar Rao Dugyala et al.   LANGMUIR

Cell Filling in Gravure Printing for Printed Electronics

(2014) Jialiang Cen et al.   LANGMUIR

3D Printed Quantum Dot Light-Emitting Diodes

(2014) Yong Lin Kong et al.   NANO LETTERS

All-printed diode operating at 1.6 GHz

(2014) N. Sani et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

A novel electrode structure compared with interdigitated electrodes as capacitive sensor

(2014) Almudena Rivadeneyra et al.   SENSORS AND ACTUATORS B-CHEMICAL

Design and characterization of a low thermal drift capacitive humidity sensor by inkjet-printing

(2014) Almudena Rivadeneyra et al.   SENSORS AND ACTUATORS B-CHEMICAL

Using a magnetite/thermoplastic composite in 3D printing of direct replacements for commercially available flow sensors

(2014) S J Leigh et al.   Smart Materials and Structures

Performance and Stability of Aerosol-Jet-Printed Electrolyte-Gated Transistors Based on Poly(3-hexylthiophene)

(2013) Se Hyun Kim et al.   ACS Applied Materials & Interfaces

Recent Advances in Organic Transistor Printing Processes

(2013) Boseok Kang et al.   ACS Applied Materials & Interfaces

Optimization of Aerosol Jet Printing for High-Resolution, High-Aspect Ratio Silver Lines

(2013) Ankit Mahajan et al.   ACS Applied Materials & Interfaces

Control of droplet formation by operating waveform for inks with various viscosities in piezoelectric inkjet printing

(2013) Yu-Feng Liu et al.   APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING

A flexible high potential printed battery for powering printed electronics

(2013) Abhinav M. Gaikwad et al.   APPLIED PHYSICS LETTERS

Sol-gel based TiO2 paste applied in screen-printed dye-sensitized solar cells and modules

(2013) Mateja Hočevar et al.   JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY

Elimination of the Coffee-Ring Effect by Promoting Particle Adsorption and Long-Range Interaction

(2013) A. Crivoi et al.   LANGMUIR

Fabrication of high-resolution conductive lines by combining inkjet printing with soft lithography

(2013) Jisu Sung et al.   MICROELECTRONIC ENGINEERING

A New Switching Device for Printed Electronics: Inkjet-Printed Microelectromechanical Relay

(2013) Eung Seok Park et al.   NANO LETTERS

Printed Piezoelectric Energy Harvesting Device

(2013) Moazzam Ali et al.   Advanced Energy Materials

Inkjet-Printed Graphene Electronics

(2012) Felice Torrisi et al.   ACS Nano

Digital-Mode Organic Vapor-Jet Printing (D-OVJP): Advanced Jet-on-Demand Control of Organic Thin-Film Deposition

(2012) Changhun Yun et al.   ADVANCED MATERIALS

Effects of UV irradiation on the wettability of chitosan films containing dansyl derivatives

(2012) A.P.P. Praxedes et al.   JOURNAL OF COLLOID AND INTERFACE SCIENCE

Graphene for energy harvesting/storage devices and printed electronics

(2012) Lorenzo Grande et al.   Particuology

Integrating stereolithography and direct print technologies for 3D structural electronics fabrication

(2012) Amit Joe Lopes et al.   RAPID PROTOTYPING JOURNAL

Aerosol jet printed grid for ITO-free inverted organic solar cells

(2012) Pälvi Kopola et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Preparation of Active Layers in Polymer Solar Cells by Aerosol Jet Printing

(2011) Chunhe Yang et al.   ACS Applied Materials & Interfaces

Inkjet Printed, High Mobility Inorganic-Oxide Field Effect Transistors Processed at Room Temperature

(2011) Subho Dasgupta et al.   ACS Nano

Conformal Printing of Electrically Small Antennas on Three-Dimensional Surfaces

(2011) Jacob J. Adams et al.   ADVANCED MATERIALS

Learning from “Coffee Rings”: Ordered Structures Enabled by Controlled Evaporative Self-Assembly

(2011) Wei Han et al.   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

Use of copper ink for fabricating conductive electrodes and RFID antenna tags by screen printing

(2011) Yoonhyun Kim et al.   CURRENT APPLIED PHYSICS

Complementary Ring Oscillator Exclusively Prepared by Means of Gravure and Flexographic Printing

(2011) H. Kempa et al.   IEEE TRANSACTIONS ON ELECTRON DEVICES

Fully Printed Separated Carbon Nanotube Thin Film Transistor Circuits and Its Application in Organic Light Emitting Diode Control

(2011) Pochiang Chen et al.   NANO LETTERS

Probing the morphology-device relation of Fe2O3nanostructures towards photovoltaic and sensing applications

(2011) S. Agarwala et al.   Nanoscale

19.4%-efficient large-area fully screen-printed silicon solar cells

(2011) Sebastian Gatz et al.   Physica Status Solidi-Rapid Research Letters

Printed Capacitive Based Humidity Sensors on Flexible Substrates

(2011) A. S. G. Reddy et al.   Sensor Letters

Mechanical flexibility of transparent PEDOT:PSS electrodes prepared by gravure printing for flexible organic solar cells

(2011) Chung-Ki Cho et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution

(2010) Brian Derby   Annual Review of Materials Research

Gravure Printing of Conductive Inks on Glass Substrates for Applications in Printed Electronics

(2010) Erika Hrehorova et al.   Journal of Display Technology

Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing

(2010) Frederik C. Krebs et al.   JOURNAL OF MATERIALS CHEMISTRY

Polyimide Surface Treatment by Atmospheric Pressure Plasma for Metal Adhesion

(2010) J. B. Park et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

A new dimensionless group model for determining the viscosity of nanofluids

(2010) S. Masoud Hosseini et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Crack formation and substrate effects on electrical resistivity of inkjet-printed Ag lines

(2010) Dong Jun Lee et al.   MATERIALS LETTERS

Control of droplet formation for low viscosity fluid by double waveforms applied to a piezoelectric inkjet nozzle

(2010) Pyungho Shin et al.   MICROELECTRONICS RELIABILITY

Femtosecond laser-induced modification of surface wettability of PMMA for fluid separation in microchannels

(2010) Z. K. Wang et al.   Microfluidics and Nanofluidics

Modified mass printing technique for the realization of source/drain electrodes with high resolution

(2010) G.C. Schmidt et al.   ORGANIC ELECTRONICS

Printed all-polymer electrochemical transistors on patterned ion conducting membranes

(2010) Nikolai Kaihovirta et al.   ORGANIC ELECTRONICS

Patterning of micro-scale conductive networks using reel-to-reel flexographic printing

(2010) D. Deganello et al.   THIN SOLID FILMS

Inkjet printed electronics for multifunctional composite structure

(2009) Hak Sung Kim et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Fabrication of Printed Organic Thin-Film Transistors Using Roll Printing

(2009) Jeongdai Jo et al.   JAPANESE JOURNAL OF APPLIED PHYSICS

Reduction of droplet volume by controlling actuating waveforms in inkjet printing for micro-pattern formation

(2009) H Y Gan et al.   JOURNAL OF MICROMECHANICS AND MICROENGINEERING

Influence of Fluid Physical Properties on Ink-Jet Printability

(2009) Daehwan Jang et al.   LANGMUIR

Inkjetting dielectric layer for electronic applications

(2009) Kimmo Kaija et al.   MICROELECTRONIC ENGINEERING

Direct vapor jet printing of three color segment organic light emitting devices for white light illumination

(2008) Michael S. Arnold et al.   APPLIED PHYSICS LETTERS

Spreading of an Inkjet Droplet on a Solid Surface with a Controlled Contact Angle at Low Weber and Reynolds Numbers

(2008) Yangsoo Son et al.   LANGMUIR

Inkjet-Printed Line Morphologies and Temperature Control of the Coffee Ring Effect

(2008) Dan Soltman et al.   LANGMUIR

Inkjet printed System-in-Package design and manufacturing

(2008) Jani Miettinen et al.   MICROELECTRONICS JOURNAL

Thermal degradation mechanisms of PEDOT:PSS

(2008) E VITORATOS et al.   ORGANIC ELECTRONICS

Inkjet printed electrochemical organic electronics

(2008) Richard Mannerbro et al.   SYNTHETIC METALS

Inkjet Printing of Narrow Conductive Tracks on Untreated Polymeric Substrates

(2007) T. H. J. van Osch et al.   ADVANCED MATERIALS

Direct gravure printing of indium tin oxide nanoparticle patterns on polymer foils

(2007) Joerg Puetz et al.   THIN SOLID FILMS