- Home
- Publications
- Publication Search
- Publication Details
Title
3D Printed Sensors for Biomedical Applications: A Review
Authors
Keywords
-
Journal
SENSORS
Volume 19, Issue 7, Pages 1706
Publisher
MDPI AG
Online
2019-04-10
DOI
10.3390/s19071706
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Piezoelectric microphone via a digital light processing 3D printing process
- (2019) Benjamin Tiller et al. MATERIALS & DESIGN
- Visible Light Photoinitiation of Cell Adhesive Gelatin Methacryloyl Hydrogels for Stereolithography 3D Bioprinting
- (2018) Zongjie Wang et al. ACS Applied Materials & Interfaces
- Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
- (2018) Tuan D. Ngo et al. COMPOSITES PART B-ENGINEERING
- 3D printed stretchable capacitive sensors for highly sensitive tactile and electrochemical sensing
- (2018) Kai Li et al. NANOTECHNOLOGY
- A digital light processing 3D printer for fast and high-precision fabrication of soft pneumatic actuators
- (2018) Lisen Ge et al. SENSORS AND ACTUATORS A-PHYSICAL
- Strain induced graphite/PDMS sensors for biomedical applications
- (2018) Anindya Nag et al. SENSORS AND ACTUATORS A-PHYSICAL
- An Internet-of-Things enabled Smart Sensing System for Nitrate Monitoring
- (2018) Md Eshrat E Alahi et al. IEEE Internet of Things Journal
- Developing Microfluidic Sensing Devices Using 3D Printing
- (2018) James F. Rusling ACS Sensors
- Extrusion-Based 3D Printing of Microfluidic Devices for Chemical and Biomedical Applications: A Topical Review
- (2018) Daniela Pranzo et al. Micromachines
- 3D-Printed Biosensor Arrays for Medical Diagnostics
- (2018) Mohamed Sharafeldin et al. Micromachines
- A Review of 3D Printing Technology for Medical Applications
- (2018) Qian Yan et al. Engineering
- Research of a Novel 3D Printed Strain Gauge Type Force Sensor
- (2018) Mingjie Liu et al. Micromachines
- Advances in Optical Sensing and Bioanalysis Enabled by 3D Printing
- (2018) Alexander Lambert et al. ACS Sensors
- IoT-based sensing system for phosphate detection using Graphite/PDMS sensors
- (2018) Anindya Nag et al. SENSORS AND ACTUATORS A-PHYSICAL
- Tactile Sensing From Laser-Ablated Metallized PET Films
- (2017) Anindya Nag et al. IEEE SENSORS JOURNAL
- Wearable Flexible Sensors: A Review
- (2017) Anindya Nag et al. IEEE SENSORS JOURNAL
- Applications of additive manufacturing in dentistry: A review
- (2017) Aishwarya Bhargav et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Perspective on 3D printing of separation membranes and comparison to related unconventional fabrication techniques
- (2017) Ze-Xian Low et al. JOURNAL OF MEMBRANE SCIENCE
- Stereolithographic printing of ionically-crosslinked alginate hydrogels for degradable biomaterials and microfluidics
- (2017) Thomas M. Valentin et al. LAB ON A CHIP
- Automated 3D-printed unibody immunoarray for chemiluminescence detection of cancer biomarker proteins
- (2017) C. K. Tang et al. LAB ON A CHIP
- A flexible two dimensional force sensor using PDMS nanocomposite
- (2017) Tallis H. da Costa et al. MICROELECTRONIC ENGINEERING
- The Boom in 3D-Printed Sensor Technology
- (2017) Yuanyuan Xu et al. SENSORS
- Sensing system for salinity testing using laser-induced graphene sensors
- (2017) Anindya Nag et al. SENSORS AND ACTUATORS A-PHYSICAL
- 3D–4D Printed Objects: New Bioactive Material Opportunities
- (2017) Céline Mandon et al. Micromachines
- A Review on the 3D Printing of Functional Structures for Medical Phantoms and Regenerated Tissue and Organ Applications
- (2017) Kan Wang et al. Engineering
- Stretchable, Skin-Mountable, and Wearable Strain Sensors and Their Potential Applications: A Review
- (2016) Morteza Amjadi et al. ADVANCED FUNCTIONAL MATERIALS
- Enzyme-Immobilized 3D-Printed Reactors for Online Monitoring of Rat Brain Extracellular Glucose and Lactate
- (2016) Cheng-Kuan Su et al. ANALYTICAL CHEMISTRY
- 3D-printing techniques in a medical setting: a systematic literature review
- (2016) Philip Tack et al. Biomedical Engineering Online
- 3D-printed supercapacitor-powered electrochemiluminescent protein immunoarray
- (2016) Karteek Kadimisetty et al. BIOSENSORS & BIOELECTRONICS
- A Review of 3D Printing Techniques and the Future in Biofabrication of Bioprinted Tissue
- (2016) Satyajit Patra et al. CELL BIOCHEMISTRY AND BIOPHYSICS
- Novel Sensing Approach for LPG Leakage Detection—Part II: Effects of Particle Size, Composition, and Coating Layer Thickness
- (2016) Anindya Nag et al. IEEE SENSORS JOURNAL
- Novel Sensing Approach for LPG Leakage Detection: Part I—Operating Mechanism and Preliminary Results
- (2016) Anindya Nag et al. IEEE SENSORS JOURNAL
- Rapid fabrication of microfluidic PDMS devices from reusable PDMS molds using laser ablation
- (2016) Ziya Isiksacan et al. JOURNAL OF MICROMECHANICS AND MICROENGINEERING
- 3D printed microfluidic devices: enablers and barriers
- (2016) Sidra Waheed et al. LAB ON A CHIP
- Temperature sensor realized by inkjet printing process on flexible substrate
- (2016) M.D. Dankoco et al. Materials Science and Engineering B-Advanced Functional Solid-State Materials
- 3D printed stratospheric probe as a platform for determination of DNA damage based on carbon quantum dots/DNA complex fluorescence increase
- (2016) Zbynek Heger et al. MONATSHEFTE FUR CHEMIE
- Biomimetic 4D printing
- (2016) A. Sydney Gladman et al. NATURE MATERIALS
- Determination of the extracellular acidification ofEscherichia coliK12 with a multi-chamber-based LAPS system
- (2016) Shahriar Dantism et al. PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE
- Development of rapid tooling using fused deposition modeling: a review
- (2016) Kamaljit Singh Boparai et al. RAPID PROTOTYPING JOURNAL
- 3D printing: an emerging technology for sensor fabrication
- (2016) Robert Bogue Sensor Review
- Flexible Graphene Electrodes for Prolonged Dynamic ECG Monitoring
- (2016) Cunguang Lou et al. SENSORS
- Flexible carbon nanotube nanocomposite sensor for multiple physiological parameter monitoring
- (2016) Anindya Nag et al. SENSORS AND ACTUATORS A-PHYSICAL
- Smartphone-interfaced 3D printed toxicity biosensor integrating bioluminescent “sentinel cells”
- (2016) Luca Cevenini et al. SENSORS AND ACTUATORS B-CHEMICAL
- Paper-based enzymatic reactors for batch injection analysis of glucose on 3D printed cell coupled with amperometric detection
- (2016) Anderson A. Dias et al. SENSORS AND ACTUATORS B-CHEMICAL
- Advantages and disadvantages of 3-dimensional printing in surgery: A systematic review
- (2016) Nicolas Martelli et al. SURGERY
- Temperature sensor realized by inkjet printing process on flexible substrate
- (2016) M.D. Dankoco et al. Materials Science and Engineering B-Advanced Functional Solid-State Materials
- Development of Aptamer-Based Point-of-Care Diagnostic Devices for Malaria Using Three-Dimensional Printing Rapid Prototyping
- (2016) Roderick M. Dirkzwager et al. ACS Sensors
- 4D printing smart biomedical scaffolds with novel soybean oil epoxidized acrylate
- (2016) Shida Miao et al. Scientific Reports
- Flexible Multifunctionalized Carbon Nanotubes-Based Hybrid Nanowires
- (2015) Nan Wang et al. ADVANCED FUNCTIONAL MATERIALS
- Autonomous Chemical Sensing Interface for Universal Cell Phone Readout
- (2015) Germán Comina et al. ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
- A portable low-cost long-term live-cell imaging platform for biomedical research and education
- (2015) Maria P. Walzik et al. BIOSENSORS & BIOELECTRONICS
- Processing Issues and the Characterization of Soft Electrochemical 3D Sensor
- (2015) Heftsi Ragones et al. ELECTROCHIMICA ACTA
- 3D-printed biosensor with poly(dimethylsiloxane) reservoir for magnetic separation and quantum dots-based immunolabeling of metallothionein
- (2015) Zbynek Heger et al. ELECTROPHORESIS
- Occupancy Detection at Smart Home Using Real-Time Dynamic Thresholding of Flexiforce Sensor
- (2015) Anindya Nag et al. IEEE SENSORS JOURNAL
- 3D-printed microfluidic automation
- (2015) Anthony K. Au et al. LAB ON A CHIP
- Development and validation of a 3D-printed interfacial stress sensor for prosthetic applications
- (2015) P. Laszczak et al. MEDICAL ENGINEERING & PHYSICS
- 3D printing of biomaterials
- (2015) Amit Bandyopadhyay et al. MRS BULLETIN
- Fabrication of biocompatible lab-on-chip devices for biomedical applications by means of a 3D-printing process
- (2015) S. Takenaga et al. PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE
- A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
- (2015) E.O. Olakanmi et al. PROGRESS IN MATERIALS SCIENCE
- Application of 3D Printing Technology in Increasing the Diagnostic Performance of Enzyme-Linked Immunosorbent Assay (ELISA) for Infectious Diseases
- (2015) Harpal Singh et al. SENSORS
- 3D printed molds for non-planar PDMS microfluidic channels
- (2015) Yongha Hwang et al. SENSORS AND ACTUATORS A-PHYSICAL
- Disposable electrochemical sensor prepared using 3D printing for cell and tissue diagnostics
- (2015) Heftsi Ragones et al. SENSORS AND ACTUATORS B-CHEMICAL
- Highly sensitive, room temperature gas sensor based on polyaniline-multiwalled carbon nanotubes (PANI/MWCNTs) nanocomposite for trace-level ammonia detection
- (2015) Sukhananazerin Abdulla et al. SENSORS AND ACTUATORS B-CHEMICAL
- Highly flexible room temperature NO 2 sensor based on MWCNTs-WO 3 nanoparticles hybrid on a PET substrate
- (2015) Usman Yaqoob et al. SENSORS AND ACTUATORS B-CHEMICAL
- New perspectives in shake flask pH control using a 3D-printed control unit based on pH online measurement
- (2015) Christian Ude et al. SENSORS AND ACTUATORS B-CHEMICAL
- Pt- and Pd-decorated MWCNTs for vapour and gas detection at room temperature
- (2015) Hamdi Baccar et al. Beilstein Journal of Nanotechnology
- Simple, Cost-Effective 3D Printed Microfluidic Components for Disposable, Point-of-Care Colorimetric Analysis
- (2015) Ho Nam Chan et al. ACS Sensors
- Development Trends in Additive Manufacturing and 3D Printing
- (2015) Bingheng Lu et al. Engineering
- Customizable 3D Printed ‘Plug and Play’ Millifluidic Devices for Programmable Fluidics
- (2015) Soichiro Tsuda et al. PLoS One
- 3D-Printed Microfluidic Device for the Detection of Pathogenic Bacteria Using Size-based Separation in Helical Channel with Trapezoid Cross-Section
- (2015) Wonjae Lee et al. Scientific Reports
- Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
- (2014) Joseph T. Muth et al. ADVANCED MATERIALS
- 3D-printed fluidic devices enable quantitative evaluation of blood components in modified storage solutions for use in transfusion medicine
- (2014) Chengpeng Chen et al. ANALYST
- A 3D-printed device for a smartphone-based chemiluminescence biosensor for lactate in oral fluid and sweat
- (2014) Aldo Roda et al. ANALYST
- Ultrarapid Detection of Pathogenic Bacteria Using a 3D Immunomagnetic Flow Assay
- (2014) Wonjae Lee et al. ANALYTICAL CHEMISTRY
- The production of anatomical teaching resources using three-dimensional (3D) printing technology
- (2014) Paul G. McMenamin et al. Anatomical Sciences Education
- Metal Additive Manufacturing: A Review
- (2014) William E. Frazier JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- 3D printed microfluidic devices with integrated versatile and reusable electrodes
- (2014) Jayda L. Erkal et al. LAB ON A CHIP
- Selective Ultrathin Carbon Sheath on Porous Silicon Nanowires: Materials for Extremely High Energy Density Planar Micro-Supercapacitors
- (2014) John P. Alper et al. NANO LETTERS
- Real-time monitoring of quorum sensing in 3D-printed bacterial aggregates using scanning electrochemical microscopy
- (2014) Jodi L. Connell et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Ozone flexible sensors fabricated by photolithography and laser ablation processes based on ZnO nanoparticles
- (2014) M. Acuautla et al. SENSORS AND ACTUATORS B-CHEMICAL
- Active origami by 4D printing
- (2014) Qi Ge et al. Smart Materials and Structures
- 3D multifunctional integumentary membranes for spatiotemporal cardiac measurements and stimulation across the entire epicardium
- (2014) Lizhi Xu et al. Nature Communications
- 3D printed modules for integrated microfluidic devices
- (2014) Kyoung G. Lee et al. RSC Advances
- A thin all-elastomeric capacitive pressure sensor array based on micro-contact printed elastic conductors
- (2014) Su-Jeong Woo et al. Journal of Materials Chemistry C
- High performance of carbon nanotubes/silver nanowires-PET hybrid flexible transparent conductive films via facile pressing-transfer technique
- (2014) Mao-xiang Jing et al. Nanoscale Research Letters
- A 3D Printed Fluidic Device that Enables Integrated Features
- (2013) Kari B. Anderson et al. ANALYTICAL CHEMISTRY
- 3D printed chip for electrochemical detection of influenza virus labeled with CdS quantum dots
- (2013) Ludmila Krejcova et al. BIOSENSORS & BIOELECTRONICS
- Liquid-Phase Gallium–Indium Alloy Electronics with Microcontact Printing
- (2013) Arya Tabatabai et al. LANGMUIR
- 3D Printed Bionic Ears
- (2013) Manu S. Mannoor et al. NANO LETTERS
- Highly sensitive, transparent, and flexible gas sensors based on gold nanoparticle decorated carbon nanotubes
- (2013) Kangho Lee et al. SENSORS AND ACTUATORS B-CHEMICAL
- Preparation of flexible VOC sensor based on carbon nanotubes and gold nanoparticles
- (2013) Cihat Tasaltin et al. SENSORS AND ACTUATORS B-CHEMICAL
- A potentiometric cobalt-based phosphate sensor based on screen-printing technology
- (2013) Lei Zhu et al. Frontiers of Environmental Science & Engineering
- Silicon nanowire biosensor and its applications in disease diagnostics: A review
- (2012) Guo-Jun Zhang et al. ANALYTICA CHIMICA ACTA
- Graphene-based transparent strain sensor
- (2012) Sang-Hoon Bae et al. CARBON
- A review on 3D micro-additive manufacturing technologies
- (2012) Mohammad Vaezi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A review of wearable sensors and systems with application in rehabilitation
- (2012) Shyamal Patel et al. Journal of NeuroEngineering and Rehabilitation
- A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors
- (2012) Simon J. Leigh et al. PLoS One
- Silicon-Nanowire-Based CMOS-Compatible Field-Effect Transistor Nanosensors for Ultrasensitive Electrical Detection of Nucleic Acids
- (2011) Anran Gao et al. NANO LETTERS
- Flexible polyimide-based force sensor
- (2011) Jagoda A. Dobrzynska et al. SENSORS AND ACTUATORS A-PHYSICAL
- A 3D printed dry electrode for ECG/EEG recording
- (2011) P. Salvo et al. SENSORS AND ACTUATORS A-PHYSICAL
- Piezoresistive silicon thin film sensor array for biomedical applications
- (2011) P. Alpuim et al. THIN SOLID FILMS
- Magnetic biosensor technologies for medical applications: a review
- (2010) J. Llandro et al. MEDICAL & BIOLOGICAL ENGINEERING & COMPUTING
- An integrated optic ethanol vapor sensor based on a silicon-on-insulator microring resonator coated with a porous ZnO film
- (2010) Nebiyu A. Yebo et al. OPTICS EXPRESS
- Wireless Sensor Networks for Healthcare
- (2010) JeongGil Ko et al. PROCEEDINGS OF THE IEEE
- A Large Area Flexible Array Sensors Using Screen Printing Technology
- (2009) Wen-Yang Chang et al. Journal of Display Technology
- Patterning conductive PDMS nanocomposite in an elastomer using microcontact printing
- (2009) Chao-Xuan Liu et al. JOURNAL OF MICROMECHANICS AND MICROENGINEERING
- Wireless sensor network survey
- (2008) Jennifer Yick et al. Computer Networks
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now