Thermo-Mechanical Simulation of Underwater Friction Stir Welding of Low Carbon Steel
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Thermo-Mechanical Simulation of Underwater Friction Stir Welding of Low Carbon Steel
Authors
Keywords
-
Journal
Materials
Volume 14, Issue 17, Pages 4953
Publisher
MDPI AG
Online
2021-08-31
DOI
10.3390/ma14174953
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Analysis and characterization of dynamic recrystallization and grain structure evolution in friction stir welding of aluminum plates
- (2021) Pengfei Yu et al. ACTA MATERIALIA
- Friction Spot Extrusion Welding on Dissimilar Materials AA2024-T3 to AA5754-O: Effect of Shoulder Plunge Depth
- (2021) S. Memon et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Effects of materials positioning and tool rotational speed on metallurgical and mechanical properties of dissimilar modified friction stir clinching of AA5754-O and AA2024-T3 sheets
- (2021) S. Memon et al. Results in Physics
- Tool-Workpiece Stick-Slip Conditions and their Effects on Torque and Heat Generation Rate in the Friction Stir Welding
- (2021) Xue Wang et al. ACTA MATERIALIA
- Dissimilar welding of AA5083 to AZ31 Mg alloys using Modified friction stir clinching brazing
- (2021) M. Paidar et al. MATERIALS LETTERS
- Effect of Stirring Pin Rotation Speed on Microstructure and Mechanical Properties of 2A14-T4 Alloy T-Joints Produced by Stationary Shoulder Friction Stir Welding
- (2021) Haifeng Yang et al. Materials
- Underwater friction stir welding of PC: Experimental study and thermo-mechanical modelling
- (2021) Hamed Aghajani Derazkola et al. Journal of Manufacturing Processes
- Effects of friction stir welding tool tilt angle on properties of Al-Mg-Si alloy T-joint
- (2021) Hesamoddin Aghajani Derazkola et al. CIRP Journal of Manufacturing Science and Technology
- Mechanical and microstructural properties evolutions of various alloys welded through cooling assisted friction-stir welding: A review
- (2021) Virendra Pratap Singh et al. INTERMETALLICS
- The Influence of Tool Shape and Process Parameters on the Mechanical Properties of AW-3004 Aluminium Alloy Friction Stir Welded Joints
- (2021) Anna Janeczek et al. Materials
- A synchronous placement and size-based multi-objective optimization method for heat dissipation design on antenna module of space solar power satellite
- (2021) Chen Yang et al. Sustainable Energy Technologies and Assessments
- Iterative two-layer thermal design strategy for step sandwich antenna of space solar power satellite using modified constrained multi-objective optimization
- (2021) Chen Yang et al. AEROSPACE SCIENCE AND TECHNOLOGY
- Surface modification of aluminum alloy by incorporation of AlCoCrFeNi high entropy alloy particles via underwater friction stir processing
- (2020) Xiao Yang et al. SURFACE & COATINGS TECHNOLOGY
- Current Status and Development of Submerged Friction Stir Welding: A Review
- (2020) C. Rathinasuriyan et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- Simulation and experimental study of underwater dissimilar friction-stir welding between aluminium and steel
- (2020) Arameh Eyvazian et al. Journal of Materials Research and Technology-JMR&T
- EBSD study of underwater friction stir welded AA7003-T4 and AA6060-T4 dissimilar joint
- (2020) Jialiang Dong et al. Journal of Materials Research and Technology-JMR&T
- Evaluation of capabilities of ultrasonic vibration on the surface, electrical and mechanical behaviours of aluminium to copper dissimilar friction stir welds
- (2020) Najib A. Muhammad et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Microstructural evaluation and tribological properties of underwater friction stir processed CP-copper and its alloy
- (2020) A. MOAREF et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Friction Stir Welding and Friction Spot Stir Welding Processes of Polymers—State of the Art
- (2020) Francesco Lambiase et al. Materials
- Monte Carlo simulation of grain refinement during friction stir processing
- (2020) F. Khodabakhshi et al. JOURNAL OF MATERIALS SCIENCE
- CFD Modelling of Temperature Distribution and Material Flow Investigation During FSW of DH36 Shipbuilding Grade Steel
- (2020) Avinish Tiwari et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- Surface and mechanical characterization of stationary shoulder friction stir welded lap joints: experimental and numerical approach
- (2020) Gianluca Buffa et al. International Journal of Material Forming
- Effect of Tool Pin Profile on Material Flow in Double Shoulder Friction Stir Welding of AZ91 Magnesium Alloy
- (2020) MohammadHosein Mirzaei et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Interface characteristics of high-entropy alloy/Al-Mg composites by underwater friction stir processing
- (2020) Xiao Yang et al. MATERIALS LETTERS
- Evaluation of a polymer-steel laminated sheet composite structure produced by friction stir additive manufacturing (FSAM) technology
- (2020) H. Aghajani Derazkola et al. POLYMER TESTING
- Acoustic induced antifriction and its effect on thermo-mechanical behavior in ultrasonic assisted friction stir welding
- (2020) Wenzhen Zhao et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Friction spot extrusion welding-brazing of copper to aluminum alloy
- (2020) M. Paidar et al. MATERIALS LETTERS
- Underwater friction stir welding of Al-Mg alloy: Thermo-mechanical modeling and validation
- (2020) Pouyan Talebizadehsardari et al. Materials Today Communications
- An adaptive sensor placement algorithm for structural health monitoring based on multi-objective iterative optimization using weight factor updating
- (2020) Chen Yang MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Weldability of AA6061-T6 and AISI 304 by underwater friction stir welding
- (2019) Raju P. Mahto et al. Journal of Manufacturing Processes
- Cellular automaton simulation of dynamic recrystallization behavior in V-10Cr-5Ti alloy under hot deformation conditions
- (2019) Zhuo-han CAO et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Underwater submerged dissimilar friction-stir welding of AA5083 aluminum alloy and A441 AISI steel
- (2019) Hamed Aghajani Derazkola et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- R-ALE simulation of heat transfer during friction stir welding of an AA2xxx/AA7xxx joint on a large process window
- (2019) Hugo Robe et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Microstructure and mechanical properties of fine-grained aluminum matrix composite reinforced with nitinol shape memory alloy particulates produced by underwater friction stir processing
- (2019) G.Q. Huang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A novel fed friction-stir (FFS) technology for nanocomposite joining
- (2019) Hamed Aghajani Derazkola et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Study on the effects of tool tile angle, offset and plunge depth on friction stir welding of poly(methyl methacrylate) T-joint
- (2019) Arameh Eyvazian et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Influence of tool thread pitch on material flow and thermal process in friction stir welding
- (2019) Z. Sun et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Improving mechanical properties of friction-stir-spot-welded advanced ultra-high-strength steel with additional water cooling
- (2019) Z. W. Wang et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Submerged friction stir welding of dissimilar joints between an Al-Mg alloy and low carbon steel: Thermo-mechanical modeling, microstructural features, and mechanical properties
- (2019) Hamed Aghajani Derazkola et al. Journal of Manufacturing Processes
- Numerical design of high depth-to-width ratio friction stir welding
- (2018) Yongxian Huang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Study on residual stresses caused by underwater friction stir welding: FE modeling and ultrasonic measurement
- (2018) Solaleh Salimi et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING
- Review on underwater friction stir welding: A variant of friction stir welding with great potential of improving joint properties
- (2018) Mohd. Atif WAHID et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Experimental and thermomechanical analysis of the effect of tool pin profile on the friction stir welding of poly(methyl methacrylate) sheets
- (2018) Hamed Aghajani Derazkola et al. Journal of Manufacturing Processes
- Intermetallic compounds (IMCs) formation during dissimilar friction-stir welding of AA5005 aluminum alloy to St-52 steel: numerical modeling and experimental study
- (2018) H. Aghajani Derazkola et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Three-dimensional numerical modeling of the friction stir welding of dissimilar steels
- (2017) C. A. Hernández et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of Traverse and Rotational Speeds on the Tensile Behavior of the Underwater Dissimilar Friction Stir Welded Aluminum Alloys
- (2017) Kh. Bijanrostami et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- A study on microstructure and mechanical properties of AA 3003 aluminum alloy joints by underwater friction stir welding
- (2017) Y.B. Tan et al. MATERIALS CHARACTERIZATION
- Experimental and thermomechanical analysis of friction stir welding of poly(methyl methacrylate) sheets
- (2017) H. Aghajani Derazkola et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Friction-stir lap-joining of aluminium-magnesium/poly-methyl-methacrylate hybrid structures: thermo-mechanical modelling and experimental feasibility study
- (2017) H. Aghajani Derazkola et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Effects of processing parameters on microstructure and mechanical behaviors of underwater friction stir welding of Al5083 alloy
- (2017) Farzad Heirani et al. Journal of Manufacturing Processes
- Improvement in Joint Strength of Spray-Deposited Al-Zn-Mg-Cu Alloy in Underwater Friction Stir Welding by Altered Temperature of Cooling Water
- (2016) Haimei Liang et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Numerical analysis of effect of coolant on the transient temperature in underwater friction stir welding of Al6061-T6
- (2015) Malihe Hajinezhad et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of cooling conditions on joint properties and microstructures of aluminum and magnesium dissimilar alloys by friction stir welding
- (2015) Yong Zhao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Microstructural characterizations and mechanical properties in underwater friction stir welding of aluminum and magnesium dissimilar alloys
- (2015) Yong Zhao et al. MATERIALS & DESIGN
- Friction stir welding of 6 mm thick carbon steel underwater and in air
- (2015) P. Baillie et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- A numerical comparison of the flow behaviour in Friction Stir Welding (FSW) using unworn and worn tool geometries
- (2015) A.F. Hasan et al. MATERIALS & DESIGN
- Investigation on dissimilar underwater friction stir lap welding of 6061-T6 aluminum alloy to pure copper
- (2014) Jingqing Zhang et al. MATERIALS & DESIGN
- Experimental investigation of underwater friction-stir welding of 5083 marine-grade aluminum alloy
- (2014) Emad Eldin Kishta et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Microstructure and mechanical properties of spray formed 7055 aluminum alloy by underwater friction stir welding
- (2013) Yong Zhao et al. MATERIALS & DESIGN
- Homogeneity of Mechanical Properties of Underwater Friction Stir Welded 2219-T6 Aluminum Alloy
- (2010) H. J. Liu et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Effect of welding speed on microstructures and mechanical properties of underwater friction stir welded 2219 aluminum alloy
- (2010) H.J. Liu et al. MATERIALS & DESIGN
- Mechanical properties of underwater friction stir welded 2219 aluminum alloy
- (2010) Hui-jie LIU et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Material Flow in FSW of T-joints: Experimental and Numerical Analysis
- (2008) G. Buffa et al. International Journal of Material Forming
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreFind the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
Search