Experimental and numerical study of failure characteristics of brittle rocks with single internal 3D open-type flaw
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Experimental and numerical study of failure characteristics of brittle rocks with single internal 3D open-type flaw
Authors
Keywords
-
Journal
Acta Geotechnica
Volume -, Issue -, Pages -
Publisher
Springer Science and Business Media LLC
Online
2021-07-02
DOI
10.1007/s11440-021-01285-8
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Study on the effect of water on electromagnetic radiation characteristics of fractured sandstone under load
- (2021) Rongxi Shen et al. Environmental Earth Sciences
- Experimental Study on Failure Behaviour of Ligaments Between Strike-Inconsistent Fissure Pairs Under Uniaxial Compression
- (2021) Da Huang et al. Rock Mechanics and Rock Engineering
- Experimental Study on Anchorage Mechanical Behavior and Surface Cracking Characteristics of a Non-persistent Jointed Rock Mass
- (2021) Sheng-Qi Yang et al. Rock Mechanics and Rock Engineering
- Frequency Characteristics of Acoustic Emissions Induced by Crack Propagation in Rock Tensile Fracture
- (2021) Ruochen Jiang et al. Rock Mechanics and Rock Engineering
- Experimental investigation on hydraulic fracturing of granite specimens with double flaws based on DIC
- (2020) Cheng Zhao et al. ENGINEERING GEOLOGY
- Simulation of compression-induced shear-mode cracks in rocks based on experimental investigations performed on gypsum specimens
- (2020) Jun Xu et al. Bulletin of Engineering Geology and the Environment
- AE event rate characteristics of flawed granite: from damage stress to ultimate failure
- (2020) Jian-Zhi Zhang et al. GEOPHYSICAL JOURNAL INTERNATIONAL
- 3D Crack Growth in Biaxial Compression: Influence of Shape and Inclination of Initial Cracks
- (2020) Hongyu Wang et al. ROCK MECHANICS AND ROCK ENGINEERING
- Mechanical and Volumetric Fracturing Behaviour of Three-Dimensional Printing Rock-like Samples Under Dynamic Loading
- (2020) Tao Zhou et al. ROCK MECHANICS AND ROCK ENGINEERING
- Experimental study of failure characteristics and fissure propagation in hydrous siltstone
- (2020) Liqiang Yu et al. Arabian Journal of Geosciences
- Deformation localization and cracking processes of sandstone containing two flaws of different geometric arrangements
- (2020) Ruide Lei et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- The Microscopic Mechanism of Crack Evolution in Brittle Material Containing 3-D Embedded Flaw
- (2020) Bangxiang Li et al. ROCK MECHANICS AND ROCK ENGINEERING
- Forecasting Catastrophic Rupture in Brittle Rocks using Precursory AE Time Series
- (2020) Jian‐Zhi Zhang et al. JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH
- Cracking process and acoustic emission characteristics of sandstone with two parallel filled-flaws under biaxial compression
- (2020) Ruide Lei et al. ENGINEERING FRACTURE MECHANICS
- An experimental study on fracture evolution mechanism of a non-persistent jointed rock mass with various anchorage effects by DSCM, AE and X-ray CT observations
- (2020) Sheng-Qi Yang et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- An Experimental and Numerical Study on the Influence of Filling Materials on Double-Crack Propagation
- (2020) Xiaoying Zhuang et al. Rock Mechanics and Rock Engineering
- Cracking behavior of rock containing non-persistent joints with various joints inclinations
- (2020) Miao Chen et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Influence of different concealment conditions of parallel double flaws on mechanical properties and failure characteristics of brittle rock under uniaxial compression
- (2020) Yusong Zhao et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Effect of water chemical corrosion on mechanical properties and failure modes of pre-fissured sandstone under uniaxial compression
- (2020) Chuan-Gen Gong et al. Acta Geotechnica
- The crack coalescence mode and physical field evolutionary characteristics of a brittle material containing two 3-D parallel embedded flaws
- (2020) Bang-Xiang Li et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Characterization of stress field evolution during 3D internal fracture propagation using additively printed models and frozen stress techniques
- (2020) Yang Ju et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Mechanical properties and fracture evolution of sandstone specimens containing different inclusions under uniaxial compression
- (2019) Quanqi Zhu et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Flat-joint model to reproduce the mechanical behaviour of intact rocks
- (2019) Mojtaba Bahaaddini et al. European Journal of Environmental and Civil Engineering
- Experimental and Numerical Study into 3D Crack Growth from a Spherical Pore in Biaxial Compression
- (2019) Hongyu Wang et al. ROCK MECHANICS AND ROCK ENGINEERING
- Microporous structures and compressive strength of high-performance rubber concrete with internal curing agent
- (2019) Han Zhu et al. CONSTRUCTION AND BUILDING MATERIALS
- Experimental investigation of progressive cracking processes in granite under uniaxial loading using digital imaging and AE techniques
- (2019) Xiao-Ping Zhou et al. JOURNAL OF STRUCTURAL GEOLOGY
- Strength and Failure Characteristics of Rocklike Material Containing a Large-Opening Crack under Uniaxial Compression: Experimental and Numerical Studies
- (2019) Shibing Huang et al. International Journal of Geomechanics
- The crack nature analysis of primary and secondary cracks: A numerical study based on moment tensors
- (2018) Qi Zhang et al. ENGINEERING FRACTURE MECHANICS
- Replication of internal defects and investigation of mechanical and fracture behaviour of rock using 3D printing and 3D numerical methods in combination with X-ray computerized tomography
- (2018) J.B. Zhu et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Experimental Study on the Growth, Coalescence and Wrapping Behaviors of 3D Cross-Embedded Flaws Under Uniaxial Compression
- (2018) Xiao-Ping Zhou et al. ROCK MECHANICS AND ROCK ENGINEERING
- Failure characteristics of rock-like materials with single flaws under uniaxial compression
- (2018) Cheng Zhao et al. Bulletin of Engineering Geology and the Environment
- Numerical investigation of the shear behavior of granite materials containing discontinuous joints by utilizing the flat-joint model
- (2018) Xu-Xu Yang et al. COMPUTERS AND GEOTECHNICS
- Numerical Analysis of the Flattened Brazilian Test: Failure Process, Recommended Geometric Parameters and Loading Conditions
- (2018) Shunchuan Wu et al. ENGINEERING FRACTURE MECHANICS
- Emergent Wave Conversion as a Precursor to Shear Crack Initiation
- (2018) Anahita Modiriasari et al. GEOPHYSICAL RESEARCH LETTERS
- Fracturing Behavior Study of Three-Flawed Specimens by Uniaxial Compression and 3D Digital Image Correlation: Sensitivity to Brittleness
- (2018) Xiao-Ping Zhou et al. ROCK MECHANICS AND ROCK ENGINEERING
- Investigation of effective stress intensity factors during overload fatigue cycles using photoelastic and DIC techniques
- (2018) J.M. Vasco-Olmo et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Numerical study of interaction between a hydraulic fracture and a weak plane using the bonded-particle model based on moment tensors
- (2018) Qi Zhang et al. COMPUTERS AND GEOTECHNICS
- Fracture analysis of sandstone with a single filled flaw under uniaxial compression
- (2018) Shuting Miao et al. ENGINEERING FRACTURE MECHANICS
- Volumetric fracturing behavior of 3D printed artificial rocks containing single and double 3D internal flaws under static uniaxial compression
- (2018) T. Zhou et al. ENGINEERING FRACTURE MECHANICS
- Effect of the intermediate principal stress on 3-D crack growth
- (2018) Hongyu Wang et al. ENGINEERING FRACTURE MECHANICS
- Acoustic Emission Associated with Self-Sustaining Failure in Low-Porosity Sandstone Under Uniaxial Compression
- (2018) Shihuai Zhang et al. ROCK MECHANICS AND ROCK ENGINEERING
- Three-dimensional evolution of damage in sandstone Brazilian discs by the concurrent use of active and passive ultrasonic techniques
- (2018) Shihuai Zhang et al. Acta Geotechnica
- Three-dimensional numerical study on the failure characteristics of intermittent fissures under compressive-shear loads
- (2018) Yun-Teng Wang et al. Acta Geotechnica
- State of the art of corner point singularities under in-plane and out-of-plane loading
- (2017) Les P. Pook et al. ENGINEERING FRACTURE MECHANICS
- Failure behaviour of rock-like materials containing two pre-existing unparallel flaws: an insight from particle flow modeling
- (2017) Sheng-Qi Yang et al. European Journal of Environmental and Civil Engineering
- Experimental and numerical study on the fracture coalescence behavior of rock-like materials containing two non-coplanar filled fissures under uniaxial compression
- (2017) Wen-Ling Tian et al. Geomechanics and Engineering
- Progressive failure of new modelling material with a single internal crack under biaxial compression and the 3-D numerical simulation
- (2016) Jin-Wei Fu et al. ENGINEERING FRACTURE MECHANICS
- Different mechanical and cracking behaviors of single-flawed brittle gypsum specimens under dynamic and quasi-static loadings
- (2016) Chunjiang Zou et al. ENGINEERING GEOLOGY
- Effects of Micro-structure and Micro-parameters on Brazilian Tensile Strength Using Flat-Joint Model
- (2016) Xueliang Xu et al. ROCK MECHANICS AND ROCK ENGINEERING
- An Experimental and Numerical Study on Mechanical Behavior of Ubiquitous-Joint Brittle Rock-Like Specimens Under Uniaxial Compression
- (2016) Ri-hong Cao et al. ROCK MECHANICS AND ROCK ENGINEERING
- Crack coalescence between two non-parallel flaws in rock-like material under uniaxial compression
- (2015) Xiao-Ping Zhang et al. ENGINEERING GEOLOGY
- An Experimental and Numerical Study on Cracking Behavior of Brittle Sandstone Containing Two Non-coplanar Fissures Under Uniaxial Compression
- (2015) Sheng-Qi Yang et al. ROCK MECHANICS AND ROCK ENGINEERING
- A Study of Three Intrinsic Problems of the Classic Discrete Element Method Using Flat-Joint Model
- (2015) Shunchuan Wu et al. ROCK MECHANICS AND ROCK ENGINEERING
- Visualization of the complex structure and stress field inside rock by means of 3D printing technology
- (2014) Yang Ju et al. CHINESE SCIENCE BULLETIN
- Coalescence of two parallel pre-existing surface cracks in granite
- (2014) P. Yin et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Displacement field analysis for cracking processes in bonded-particle model
- (2013) Xiao-Ping Zhang et al. Bulletin of Engineering Geology and the Environment
- Fracture of sandstone characterized by digital image correlation
- (2013) Qing Lin et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Strain fields and mechanical response of a highly to medium fissured bentonite clay
- (2012) C. Vitone et al. INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS
- Optical method for measuring slow crack growth in cementitious materials
- (2012) W. Cai et al. MATERIALS AND STRUCTURES
- Crack Initiation, Propagation and Coalescence in Rock-Like Material Containing Two Flaws: a Numerical Study Based on Bonded-Particle Model Approach
- (2012) Xiao-Ping Zhang et al. ROCK MECHANICS AND ROCK ENGINEERING
- Cracking Processes in Rock-Like Material Containing a Single Flaw Under Uniaxial Compression: A Numerical Study Based on Parallel Bonded-Particle Model Approach
- (2011) Xiao-Ping Zhang et al. ROCK MECHANICS AND ROCK ENGINEERING
- Strength failure and crack coalescence behavior of brittle sandstone samples containing a single fissure under uniaxial compression
- (2010) Sheng-Qi Yang et al. INTERNATIONAL JOURNAL OF FRACTURE
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationPublish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn More