Effectively enhanced strength by interfacial reactions in in-situ carbon reinforced Al matrix composites

Design and Synthesis of C-O Grain Boundary Strengthening of Al Composites

(2020) Jianian Hu et al.   Nanomaterials

X-ray photoelectron spectroscopy: towards reliable binding energy referencing

(2019) G. Greczynski et al.   PROGRESS IN MATERIALS SCIENCE

Comparing the strengthening efficiency of multiwalled carbon nanotubes and graphene nanoplatelets in aluminum matrix

(2019) Lavish K. Singh et al.   POWDER TECHNOLOGY

Regulation of interface between carbon nanotubes-aluminum and its strengthening effect in CNTs reinforced aluminum matrix nanocomposites

(2019) Xin Zhang et al.   CARBON

Temperature-induced structural evolution of Sm nanoparticles on Al 2 O 3 thin film: An in-situ investigation using SRPES, XPS and STM

(2018) Qian Xu et al.   APPLIED SURFACE SCIENCE

Effects of bias voltage on the microstructure and properties of Al-doped hydrogenated amorphous carbon films synthesized by a hybrid deposition technique

(2018) Wei Xu et al.   VACUUM

Mechanical properties of hybrid composites reinforced by carbon and basalt fibers

(2018) Guangyong Sun et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Interfacial reaction induced efficient load transfer in few-layer graphene reinforced Al matrix composites for high-performance conductor

(2018) Weiwei Zhou et al.   COMPOSITES PART B-ENGINEERING

Microstructural evaluation and mechanical properties of Al-CNT nanocomposites produced by different processing methods

(2017) F. Rikhtegar et al.   JOURNAL OF ALLOYS AND COMPOUNDS

In-situ synthesis of graphene decorated with nickel nanoparticles for fabricating reinforced 6061Al matrix composites

(2017) Guang Liu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Adsorption of 2, 3, 7, 8-tetrachlorodibenzo-p-dioxin (TCDD) on pristine, defected and Al-doped carbon nanotube: A dispersion corrected DFT study

(2017) Z. Izakmehri et al.   VACUUM

Synthesis and thermal conductivity improvement of W-Cu composites modified with WC interfacial layer

(2017) Chengcheng Zhang et al.   MATERIALS & DESIGN

In-situ characterization of interfacial shear strength in multi-walled carbon nanotube reinforced aluminum matrix composites

(2016) Weiwei Zhou et al.   CARBON

Sp 2 carbon embedded in Al-6061 and Al-7075 alloys in the form of crystalline graphene nanoribbons

(2016) H.M. Iftekhar Jaim et al.   CARBON

Interface and interfacial reactions in multi-walled carbon nanotube-reinforced aluminum matrix composites

(2016) Weiwei Zhou et al.   CARBON

A facile synthesis and efficient thermal oxidation of polytetrafluoroethylene-coated aluminum powders

(2016) Kyung Tae Kim et al.   MATERIALS LETTERS

Influence of particle size and spatial distribution of B 4 C reinforcement on the microstructure and mechanical behavior of precipitation strengthened Al alloy matrix composites

(2016) Chuandong Wu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Fabrication of CNT/Al composites with low damage to CNTs by a novel solution-assisted wet mixing combined with powder metallurgy processing

(2016) Z.Y. Liu et al.   MATERIALS & DESIGN

Surface chemistry modification for elimination of hydrophilic Al 4 C 3 in B 4 C/Al composites

(2016) E. Trujillo-Vázquez et al.   MATERIALS & DESIGN

Using carbon nanotubes to improve strengthening efficiency of carbon fiber/epoxy composites confined RC columns

(2015) Mohammad R. Irshidat et al.   COMPOSITE STRUCTURES

In Situ Synthesized Al4C3Nanorods with Excellent Strengthening Effect in Aluminum Matrix Composites

(2014) Biao Chen et al.   ADVANCED ENGINEERING MATERIALS

Microstructural and mechanical behavior of multi-walled carbon nanotubes reinforced Al–Mg–Si alloy composites in aging treatment

(2014) Katsuyoshi Kondoh et al.   CARBON

Investigating aluminum alloy reinforced by graphene nanoflakes

(2014) S.J. Yan et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy

(2013) Kaka Ma et al.   ACTA MATERIALIA

The Effect of Ti Addition on the Microstructure and Fracture Toughness of Bn-Al Composite Materials Synthesized by Vacuum Infiltration

(2013) W. Chao et al.   ARCHIVES OF METALLURGY AND MATERIALS

Developing high-performance aluminum matrix composites with directionally aligned carbon nanotubes by combining friction stir processing and subsequent rolling

(2013) Z.Y. Liu et al.   CARBON

Direct observation of carbon nanotube induced strengthening in aluminum composite via in situ tensile tests

(2013) Benjamin Boesl et al.   CARBON

Fabrication of carbon nanotube reinforced Al composites with well-balanced strength and ductility

(2013) Xudong Yang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Mechanical properties and interfacial analysis of aluminum matrix composites reinforced by carbon nanotubes with diverse structures

(2013) Haipeng Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

High-Efficiency Inverted Polymer Solar Cells with Transparent and Work-Function Tunable MoO3-Al Composite Film as Cathode Buffer Layer

(2012) Jian Liu et al.   ADVANCED MATERIALS

The use of flake powder metallurgy to produce carbon nanotube (CNT)/aluminum composites with a homogenous CNT distribution

(2012) Lin Jiang et al.   CARBON

Effect of ball-milling time on mechanical properties of carbon nanotubes reinforced aluminum matrix composites

(2012) Z.Y. Liu et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Thermal properties of aluminum–graphite composites by powder metallurgy

(2012) J.K. Chen et al.   COMPOSITES PART B-ENGINEERING

Enhanced thermal conductivity in diamond/aluminum composites with a tungsten interface nanolayer

(2012) Zhanqiu Tan et al.   MATERIALS & DESIGN

Observations of grain boundary impurities in nanocrystalline Al and their influence on microstructural stability and mechanical behaviour

(2011) F. Tang et al.   ACTA MATERIALIA

Singly dispersed carbon nanotube/aluminum composites fabricated by powder metallurgy combined with friction stir processing

(2011) Z.Y. Liu et al.   CARBON

Graphene–aluminum nanocomposites

(2011) Stephen F. Bartolucci et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Strong and ductile carbon nanotube/aluminum bulk nanolaminated composites with two-dimensional alignment of carbon nanotubes

(2011) Lin Jiang et al.   SCRIPTA MATERIALIA

Microstructure and tensile behavior of Al and Al-matrix carbon nanotube composites processed by high pressure torsion of the powders

(2010) Soo-Hyun Joo et al.   JOURNAL OF MATERIALS SCIENCE

Thermal conductivity of spark plasma sintering consolidated SiCp/Al composites containing pores: Numerical study and experimental validation

(2009) Ke Chu et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Combination of hot extrusion and spark plasma sintering for producing carbon nanotube reinforced aluminum matrix composites

(2008) Hansang Kwon et al.   CARBON

The effects of volume percent and aspect ratio of carbon fiber on fracture toughness of reinforced aluminum matrix composites

(2007) H. Naji et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING