Critical review on the impact of EDM process on biomedical materials
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Critical review on the impact of EDM process on biomedical materials
Authors
Keywords
-
Journal
MATERIALS AND MANUFACTURING PROCESSES
Volume -, Issue -, Pages 1-24
Publisher
Informa UK Limited
Online
2021-07-08
DOI
10.1080/10426914.2021.1942907
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Critical analysis of surface integrity parameters and dimensional accuracy in powder-mixed EDM
- (2020) Deepti Ranjan Sahu et al. MATERIALS AND MANUFACTURING PROCESSES
- Electrochemical Behaviour of Ti/Al2O3/Ni Nanocomposite Material in Artificial Physiological Solution: Prospects for Biomedical Application
- (2020) Alla Vorobjova et al. Nanomaterials
- Towards Efficient Robust Optimization using Data based Optimal Segmentation of Uncertain Space
- (2020) Priyanka D. Pantula et al. RELIABILITY ENGINEERING & SYSTEM SAFETY
- Powder-mixed electro-discharge machining performance of Inconel 718: effect of concentration of multi-walled carbon nanotube added to the dielectric media
- (2020) Thrinadh Jadam et al. SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES
- On the Investigation of Surface Integrity of Ti6Al4V ELI Using Si-Mixed Electric Discharge Machining
- (2020) Muhammad Umar Farooq et al. Materials
- Machinability Analysis and Optimization in Wire EDM of Medical Grade NiTiNOL Memory Alloy
- (2020) Vinayak N. Kulkarni et al. Materials
- Experimental Investigation, Predictive Modeling, Parametric Optimization and Cost Analysis in Electrical Discharge Machining of Al-SiC Metal Matrix Composite
- (2020) Subhashree Naik et al. Silicon
- Systematic Investigation of Polyurethane Biomaterial Surface Roughness on Human Immune Responses in vitro
- (2020) Sören Segan et al. Biomed Research International
- Effect of Surface Roughness on Pitting Corrosion of AZ31 Mg Alloy
- (2020) Jeffrey Mitchell et al. Metals
- Recurrent neural networks based modelling of industrial grinding operation
- (2020) Ravi Kiran Inapakurthi et al. CHEMICAL ENGINEERING SCIENCE
- Prediction and optimization of performance measures in electrical discharge machining using rapid prototyping tool electrodes
- (2020) Anshuman Kumar Sahu et al. JOURNAL OF INTELLIGENT MANUFACTURING
- Micro-end milling of biomedical Tz54 magnesium alloy produced through powder metallurgy
- (2020) Ali Erçetin et al. MACHINING SCIENCE AND TECHNOLOGY
- Powder mixed-EDM for potential biomedical applications: A critical review
- (2020) Md Al-Amin et al. MATERIALS AND MANUFACTURING PROCESSES
- EDM of high aspect ratio micro-holes on Ti-6Al-4V alloy by synchronizing energy interactions
- (2020) Ramver Singh et al. MATERIALS AND MANUFACTURING PROCESSES
- Bio-ceramic coatings adhesion and roughness of biomaterials through PM-EDM: a comprehensive review
- (2020) Md Al-Amin et al. MATERIALS AND MANUFACTURING PROCESSES
- Modeling of kerf width and surface roughness in wire cut electric discharge machining of Ti-6Al-4V
- (2020) K Venkata Rao et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING
- Multi-Response Optimization of ECDM Parameters for Silica (Quartz) Using Grey Relational Analysis
- (2020) Viveksheel Rajput et al. Silicon
- Recent Advances and Perceptive Insights into Powder-Mixed Dielectric Fluid of EDM
- (2020) Asarudheen Abdudeen et al. Micromachines
- In vitro degradation and cytocompatibility of a low temperature in-situ grown self-healing Mg-Al LDH coating on MAO-coated magnesium alloy AZ31
- (2020) Chang-Yang Li et al. Bioactive Materials
- Data driven robust optimization of grinding process under uncertainty
- (2020) Ravi Kiran Inapakurthi et al. MATERIALS AND MANUFACTURING PROCESSES
- Optimization of electrochemical etching process for manufacturing of micro electrodes for micro-EDM application
- (2020) Sucharita Saha et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- State of the art in processing of shape memory alloys with electrical discharge machining: A review
- (2020) Ranjit Singh et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Statistical and experimental investigation using a novel multi-objective optimization algorithm on a novel titanium hybrid composite developed by lens process
- (2020) Soutrik Bose et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- An intelligent approach to optimize the electrical discharge machining of titanium alloy by simple optimization algorithm
- (2020) Anshuman Kumar Sahu et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING
- Numerical modelling and experimental validation of crater formation in WEDM hybrid turning of Ti-6Al-4V alloy
- (2020) M Vignesh et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING
- Surface Characterization and Tribological Performance Analysis of Electric Discharge Machined Duplex Stainless Steel
- (2020) Timur Rizovich Ablyaz et al. Micromachines
- EDM performance characteristics and electrochemical corrosion analysis of Co-Cr alloy and duplex stainless steel: A comparative study
- (2020) Amit Mahajan et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING
- Numerical Modeling and Analysis of Ti6Al4V Alloy Chip for Biomedical Applications
- (2020) Waqas Saleem et al. Materials
- A Comprehensive Analysis of the Effect of Graphene-Based Dielectric for Sustainable Electric Discharge Machining of Ti-6Al-4V
- (2020) Kashif Ishfaq et al. Materials
- Biocompatibility and Cytotoxicity Study of Polydimethylsiloxane (PDMS) and Palm Oil Fuel Ash (POFA) Sustainable Super-Hydrophobic Coating for Biomedical Applications
- (2020) Srimala Sreekantan et al. Polymers
- Structural and Biomedical Properties of Common Additively Manufactured Biomaterials: A Concise Review
- (2020) Kristin S. Ødegaard et al. Metals
- Study of the Effect of the Floating Die Compaction on Mechanical Properties of Titanium Foams
- (2020) Sergio Sauceda et al. Metals
- Effects of Ti6Al4V Surfaces Manufactured through Precision Centrifugal Casting and Modified by Calcium and Phosphorus Ion Implantation on Human Osteoblasts
- (2020) Fiedler Jörg et al. Metals
- Corrosion Behavior of As-Cast Ti–10Mo–6Zr–4Sn–3Nb and Ti–6Al–4V in Hank’s Solution: A Comparison Investigation
- (2020) Jun Cheng et al. Metals
- Current Challenges and Innovative Developments in Hydroxyapatite-Based Coatings on Metallic Materials for Bone Implantation: A Review
- (2020) Bilal Beig et al. Coatings
- The Influence of Alloying and Fabrication Techniques on the Mechanical Properties, Biodegradability and Biocompatibility of Zinc: A Comprehensive Review
- (2019) J. Venezuela et al. Acta Biomaterialia
- Traveling Wire Electrochemical Discharge Machining (TW-ECDM) of Quartz Using Zinc Coated Brass Wire: Investigations on Material Removal Rate and Kerf Width Characteristics
- (2019) Ankit D. Oza et al. Silicon
- Surface Characteristics and Hydrophobicity of Ni-Ti Alloy through Magnetic Mixed Electrical Discharge Machining
- (2019) C.C. Feng et al. Materials
- A Study on the Surface Composition and Migration of Materials and Their Effect on Surface Microhardness during Micro-EDM of Ti-6Al-4V
- (2019) Muhammad P. Jahan et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Surface characteristics of mild steel using EDM with Cu-MWCNT composite electrode
- (2019) Prosun Mandal et al. MATERIALS AND MANUFACTURING PROCESSES
- Mullite cytotoxicity and cell adhesion studies
- (2019) Leandro Fernandes et al. Journal of Materials Research and Technology-JMR&T
- Machining of biocompatible materials — Recent advances
- (2019) Dragos Axinte et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- EDM μ-drilling in Ti-6Al-7Nb: experimental investigation and optimization using NSGA-II
- (2019) Kamal Kumar et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of various metal powder mixed dielectric on micro-EDM characteristics of Ti-6Al-4V
- (2019) A. P. Tiwary et al. MATERIALS AND MANUFACTURING PROCESSES
- EFFECT OF ELECTRODE MATERIAL ON CUT QUALITIES OF SHAPE MEMORY ALLOY DURING WEDM: A COMPARATIVE STUDY
- (2019) HIMADRI MAJUMDER et al. SURFACE REVIEW AND LETTERS
- Investigations of surface integrity, bio-activity and performance characteristics during wire-electrical discharge machining of Ti-6Al-7Nb biomedical alloy
- (2019) Neeraj Sharma et al. Materials Research Express
- Production of hard and lubricating surfaces on miniature components through micro-EDM process
- (2019) Shalini Mohanty et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Biocompatibility of (Ba,Ca)(Zr,Ti)O 3 piezoelectric ceramics for bone replacement materials
- (2019) Kara K. Poon et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Effect of diluted dielectric medium on spark energy in green EDM process using TGRA approach
- (2019) T. Muthuramalingam JOURNAL OF CLEANER PRODUCTION
- A data-driven approach towards finding closer estimates of optimal solutions under uncertainty for an energy efficient steel casting process
- (2019) Priyanka D. Pantula et al. ENERGY
- Performance analysis of tool electrode prepared through laser sintering process during electrical discharge machining of titanium
- (2019) Anshuman Kumar Sahu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Deep learning based system identification of industrial integrated grinding circuits
- (2019) Srinivas Soumitri Miriyala et al. POWDER TECHNOLOGY
- Enhanced corrosion properties of biological NiTi alloy by hydroxyapatite and bioglass based biocomposite coatings
- (2019) Y. Say et al. Journal of Materials Research and Technology-JMR&T
- Biomedical Applications of Recombinant Silk-Based Materials
- (2018) Tamara Bernadette Aigner et al. ADVANCED MATERIALS
- Electric discharge machining of titanium and its alloys: review
- (2018) Jaber E. Abu Qudeiri et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effects of tool electrode size on surface characteristics in micro-EDM
- (2018) Kan Wang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Optimization of material removal rate and tool wear rate of Cu electrode in die-sinking EDM of tool steel
- (2018) Ľuboslav Straka et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Erratum: The Impact of Different Si Surface Terminations in the (001) n-Si/NiOx Heterojunction on the Oxygen Evolution Reaction (OER) by XPS and Electrochemical Methods [ J. Electrochem. Soc. , 165, H3122 (2018)]
- (2018) Sven Tengeler et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Electrode wear phenomenon and its compensation in micro electrical discharge milling: A review
- (2018) Siddhartha Kar et al. MATERIALS AND MANUFACTURING PROCESSES
- A REVIEW ON VIBRATION-ASSISTED EDM, MICRO-EDM AND WEDM
- (2018) K. P. MAITY et al. SURFACE REVIEW AND LETTERS
- Multi Response Optimization and Experimental Investigations into the Impact of Wire EDM on the Tribological Properties of Ti–6Al–4V
- (2018) Basil Kuriachen et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- Effects of Tool Electrode on EDM Performance of Ti-6Al-4V
- (2018) Rahul et al. Silicon
- Effect of Electrode Materials on Different EDM Aspects of Titanium Alloy
- (2018) Munmun Bhaumik et al. Silicon
- Experimental Investigation on Effects of Wire Electro Discharge Machining of Ti50Ni45Co5 Shape Memory Alloys
- (2018) Hargovind Soni et al. Silicon
- Particle migration and surface modification on Ti6Al4V in SiC powder mixed electrical discharge machining
- (2018) Tahsin T. Öpöz et al. Journal of Manufacturing Processes
- S and B microalloying of biodegradable Fe-30Mn-1C - Effects on microstructure, tensile properties, in vitro degradation and cytotoxicity
- (2018) J. Hufenbach et al. MATERIALS & DESIGN
- In-vitro and in-vivo, cytotoxicity evaluation of cast functionally graded biomaterials for dental implantology
- (2018) Shimaa El-Hadad et al. Materials Science & Engineering C-Materials for Biological Applications
- Multi-objective particle swarm optimization of EDM parameters to deposit HA-coating on biodegradable Mg-alloy
- (2018) Chander Prakash et al. VACUUM
- Bone substance on titanium by wire-type electric discharge machining
- (2018) Yu Kataoka et al. CLINICAL ORAL IMPLANTS RESEARCH
- Materials used for sinking EDM electrodes: a review
- (2018) Tiago Czelusniak et al. Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Developments in nonconventional machining for sustainable production: A state-of-the-art review
- (2018) Kapil Gupta et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- Comparative study of energy efficiency and environmental impact in magnetic field assisted and conventional electrical discharge machining
- (2018) Wuyi Ming et al. JOURNAL OF CLEANER PRODUCTION
- Micro-EDM drilling of ZrB2-SiC-graphite composite using micro sheet-cylinder tool electrode
- (2017) Huichao Li et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Optimisation of wear behaviour of heat treated Ti-6Al-4V alloy by response surface methodology
- (2017) S. Thirumalvalavan et al. INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY
- Effects of bioceramic particles in dielectric of powder-mixed electrical discharge machining on machining and surface characteristics of titanium alloys
- (2017) Shih-Fu Ou et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Studies on the surface of high-performance alloys machined by micro-EDM
- (2017) Wujun Feng et al. MATERIALS AND MANUFACTURING PROCESSES
- Novel non-cytotoxic, bioactive and biodegradable hybrid materials based on polyurethanes/TiO 2 for biomedical applications
- (2017) Dulce M. González-García et al. Materials Science & Engineering C-Materials for Biological Applications
- Surface modification of metallic biomaterials for enhanced functionality: a review
- (2017) A. Mahajan et al. MATERIALS TECHNOLOGY
- Challenges and opportunities for biodegradable magnesium alloy implants
- (2017) K. Kumar et al. MATERIALS TECHNOLOGY
- Electrochemical, mechanical and osseointegration evaluation of NBPC-coated 316L SS by EPD
- (2017) R. Manonmani et al. SURFACE ENGINEERING
- MICROSTRUCTURAL ANALYSIS OF TITANIUM ALLOY GEAR USING WEDM PROCESS
- (2017) K. D. MOHAPATRA et al. SURFACE REVIEW AND LETTERS
- Surface Wrinkling and Porosity of Polymer Particles toward Biological and Biomedical Applications
- (2017) Nikunjkumar R. Visaveliya et al. Advanced Materials Interfaces
- Investigation of carbon nanotube added dielectric on the surface characteristics and machining performance of Ti–6Al–4V alloy in EDM process
- (2017) Mohammadreza Shabgard et al. Journal of Manufacturing Processes
- Manufacturing of Ti-6Al-4V Micro-Implantable Parts Using Hybrid Selective Laser Melting and Micro-Electrical Discharge Machining
- (2016) Hany Hassanin et al. ADVANCED ENGINEERING MATERIALS
- Reducing side overcut in EDM process by changing electrical field between tool and work piece
- (2016) Abbas Moghanizadeh INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Parameters optimization for sustainable machining of Ti6Al4V using a novel high-speed dry electrical discharge milling
- (2016) Yang Shen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of Tool Rotation on MRR, TWR, and Surface Integrity of AISI-D3 Steel using the Rotary EDM Process
- (2016) Anand Prakash Dwivedi et al. MATERIALS AND MANUFACTURING PROCESSES
- Influence of graphite powder mixed EDM on the surface integrity characteristics of Inconel 625
- (2016) Gangadharudu Talla et al. PARTICULATE SCIENCE AND TECHNOLOGY
- State of the art in powder-mixed electric discharge machining: A review
- (2016) Gangadharudu Talla et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Modeling the tool wear rate in powder mixed electro-discharge machining of titanium alloys using dimensional analysis of cryogenically treated electrodes and workpiece
- (2016) Sanjeev Kumar et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING
- Titanium perovskite (CaTiO 3 ) formation in Ti6Al4V alloy using the electrical discharge machining process for biomedical applications
- (2016) W.F. Sales et al. SURFACE & COATINGS TECHNOLOGY
- White layer thickness prediction in wire-EDM using CuZn-coated wire electrode – ANFIS modelling
- (2016) I. Maher et al. TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING
- The effects of electrode size and discharged power on micro-electro-discharge machining drilling of stainless steel
- (2016) Gianluca D’Urso et al. Advances in Mechanical Engineering
- Surface quality analysis of die steels in powder-mixed electrical discharge machining using titan powder in fine machining
- (2016) Banh Tien Long et al. Advances in Mechanical Engineering
- Material removal mechanism in low-energy micro-EDM process
- (2015) Jun Qian et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Effects of discharge energy density on wear rate and surface roughness in EDM
- (2015) Murat Kiyak et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Spark radius modeling of resistance-capacitance pulse discharge in micro-electric discharge machining of Ti-6Al-4V: an experimental study
- (2015) B. Kuriachen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of electrode material in micro-EDM drilling of stainless steel and tungsten carbide
- (2015) G. D’Urso et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Biocompatibility assessment of spark plasma-sintered alumina-titanium cermets
- (2015) Rodrigo Guzman et al. JOURNAL OF BIOMATERIALS APPLICATIONS
- Cytotoxicity evaluation of biodegradable Zn–3Mg alloy toward normal human osteoblast cells
- (2015) N.S. Murni et al. Materials Science & Engineering C-Materials for Biological Applications
- Electric discharge machining – A potential choice for surface modification of metallic implants for orthopedic applications: A review
- (2015) Chander Prakash et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Study on the influence of micro-EDM process parameters during machining of Ti–6Al–4V superalloy
- (2014) A. P. Tiwary et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Multiresponse optimization of micro-wire electrical discharge machining process
- (2014) B. Kuriachen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Optimization of modern machining processes using advanced optimization techniques: a review
- (2014) R. Venkata Rao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Use of the grey-Taguchi method to optimise the micro-electrical discharge machining (micro-EDM) of Ti-6Al-4V alloy
- (2014) M.Y. Lin et al. INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING
- Experimental Investigations into the Effects of Microelectric-Discharge Milling Process Parameters on Processing Ti–6Al–4V
- (2014) B. Kuriachen et al. MATERIALS AND MANUFACTURING PROCESSES
- Influence of Different Tool Electrode Materials on EDMed Surface Integrity of AISI P20 Tool Steel
- (2014) S. Dewangan et al. MATERIALS AND MANUFACTURING PROCESSES
- Multi-Objective Optimization of Green Electrical Discharge Machining Ti–6Al–4V in Tap Water via Grey-Taguchi Method
- (2014) Lin Tang et al. MATERIALS AND MANUFACTURING PROCESSES
- Optimization of Parameters Using Conductive Powder in Dielectric for EDM of Super Co 605 with Multiple Quality Characteristics
- (2014) Anoop Kumar Singh et al. MATERIALS AND MANUFACTURING PROCESSES
- Innovative surface modification of Ti–6Al–4V alloy with a positive effect on osteoblast proliferation and fatigue performance
- (2014) Jana Havlikova et al. Materials Science & Engineering C-Materials for Biological Applications
- Powder Mixed Dielectric: An Approach for Improved Process Performance in EDM
- (2014) Ajay Batish et al. PARTICULATE SCIENCE AND TECHNOLOGY
- Grey relational analysis coupled with firefly algorithm for multiobjective optimization of wire electric discharge machining
- (2014) A Varun et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Additive manufacturing in prosthesis development – a case study
- (2014) Palash Kumar Maji et al. RAPID PROTOTYPING JOURNAL
- Wire electric discharge machining characteristics of titanium nickel shape memory alloy
- (2014) M. MANJAIAH et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Characterization of electric discharge machining, subsequent etching and shot-peening as a surface treatment for orthopedic implants
- (2013) Josef Stráský et al. APPLIED SURFACE SCIENCE
- Performance analysis of iso current pulse generator on machining characteristics in EDM process
- (2013) T. Muthuramalingam et al. Archives of Civil and Mechanical Engineering
- Biomanufacturing
- (2013) Mamoru Mitsuishi et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Research on material removal rate of powder mixed near dry electrical discharge machining
- (2013) Xue Bai et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Study on surface characteristics using phosphorous dielectric on wire electrical discharge machining of polycrystalline silicon
- (2013) Chin-Chang Yeh et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Biodegradable magnesium coronary stents: material, design and fabrication
- (2013) Ali Gökhan Demir et al. INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING
- Long-Term Performance of Ceramic and Metal Femoral Heads on Conventional Polyethylene in Young and Active Patients
- (2013) Morteza Meftah et al. JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME
- Study of Surface Properties in Particulate-Reinforced Metal Matrix Composites (MMCs) Using Powder-Mixed Electrical Discharge Machining (EDM)
- (2013) Sarabjeet Singh Sidhu et al. MATERIALS AND MANUFACTURING PROCESSES
- Microstructure, mechanical properties, in vitro degradation and cytotoxicity evaluations of Mg–1.5Y–1.2Zn–0.44Zr alloys for biodegradable metallic implants
- (2013) Jun Fan et al. Materials Science & Engineering C-Materials for Biological Applications
- Electrical discharge machining–based hybrid machining processes: A review
- (2013) Pankaj K Shrivastava et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Microstructures and mechanical properties of pure magnesium bars by high ratio extrusion and its subsequent annealing treatment
- (2013) Hong-fei SUN et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Machining efficiency of powder mixed near dry electrical discharge machining based on different material combinations of tool electrode and workpiece electrode
- (2013) Xue Bai et al. Journal of Manufacturing Processes
- Biomedical production of implants by additive electro-chemical and physical processes
- (2012) Paulo Bartolo et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Enhanced osteoblast response to electrical discharge machining surface
- (2012) Fukunaga OTSUKA et al. DENTAL MATERIALS JOURNAL
- A dual response surface-desirability approach to process modeling and optimization of Al2O3 powder-mixed electrical discharge machining (PMEDM) parameters
- (2012) S. Assarzadeh et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- INVESTIGATING THE EFFECTS OF EDM PARAMETERS ON SURFACE INTEGRITY, MRR AND TWR IN MACHINING OF Ti–6Al–4V
- (2012) B. Jabbaripour et al. MACHINING SCIENCE AND TECHNOLOGY
- On the relation between surface roughness of metallic substrates and adhesion of human primary bone cells
- (2012) K. Anselme et al. SCANNING
- Multi-attribute decision making for green electrical discharge machining
- (2011) S.P. Sivapirakasam et al. EXPERT SYSTEMS WITH APPLICATIONS
- Optimal parameter settings for rough and finish machining of die steels in powder-mixed EDM
- (2011) Anirban Bhattacharya et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The effect of microstructure on fatigue performance of Ti–6Al–4V alloy after EDM surface treatment for application in orthopaedics
- (2011) Josef Stráský et al. Journal of the Mechanical Behavior of Biomedical Materials
- Sustainable Micro-Manufacturing of Micro-Components via Micro Electrical Discharge Machining
- (2011) Francesco Modica et al. Sustainability
- Surface modification of die steel materials by EDM method using tungsten powder-mixed dielectric
- (2011) Sanjeev Kumar et al. Journal of Manufacturing Processes
- An Experimental Study on the Geometry of Microholes in Microelectric Discharge Machining
- (2009) Tahsin Tecelli Öpöz et al. MATERIALS AND MANUFACTURING PROCESSES
- Experimental Study of the Dry and Near-Dry Electrical Discharge Milling Processes
- (2008) Jia Tao et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Effect of electro-discharging on formation of biocompatible layer on implant surface
- (2007) Sung-Long Chen et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The effect of different surface morphology and roughness on osteoblast‐like cells
- (2007) Michael Ball et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now