Influence of strain rate and crystallographic orientation on dynamic recrystallization of pure Zn during room-temperature compression

The correlation between the recrystallization texture and subsequent isothermal grain growth in a friction stir processed rare earth containing magnesium alloy

(2020) M. Mosayebi et al.   MATERIALS CHARACTERIZATION

Microstructure and mechanical properties of a Zn-0.5Cu alloy processed by high-pressure torsion

(2020) Wiktor Bednarczyk et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructural Study of a Mg–Zn–Zr Alloy Hot Compressed at a High Strain Rate

(2020) Jing You et al.   Materials

Unveiling the underlying mechanism of forming edge cracks upon high strain-rate rolling of magnesium alloy

(2020) Biwu Zhu et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Continuous dynamic recrystallization in a Zn–Cu–Ti sheet subjected to bilinear tensile strain

(2020) M. Leonard et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

On the nucleation of deformation twins at the early stages of plasticity

(2020) Hamidreza Abdolvand et al.   ACTA MATERIALIA

The influence of Ca and Cu additions on the microstructure, mechanical and degradation properties of Zn–Ca–Cu alloys for absorbable wound closure device applications

(2020) Nan Yang et al.   Bioactive Materials

Can zinc alloys be strengthened by grain refinement? A critical evaluation of the processing of low-alloyed binary zinc alloys using ECAP

(2019) Wiktor Bednarczyk et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of solute content and temperature on the deformation mechanisms and critical resolved shear stress in Mg-Al and Mg-Zn alloys

(2019) J.-Y. Wang et al.   ACTA MATERIALIA

Mechanical Strength, Biodegradation, and in Vitro and in Vivo Biocompatibility of Zn Biomaterials

(2019) Donghui Zhu et al.   ACS Applied Materials & Interfaces

Interplay between the effects of deformation mechanisms and dynamic recrystallization on the failure of Mg-3Al-1Zn

(2019) M.W. Vaughan et al.   ACTA MATERIALIA

Determination of room-temperature superplastic asymmetry and anisotropy of Zn-0.8Ag alloy processed by ECAP

(2019) Wiktor Bednarczyk et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The Prospects for Biodegradable Zinc in Wound Closure Applications

(2019) Jeffrey Jones D. Venezuela et al.   Advanced Healthcare Materials

Microstructure Evolution During Hot Deformation of REX734 Austenitic Stainless Steel

(2019) Mykola Kulakov et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Zinc-based alloys for degradable vascular stent applications

(2018) Ehsan Mostaed et al.   Acta Biomaterialia

Dynamic recrystallization of titanium: Effect of pre-activated twinning at cryogenic temperature

(2018) C.K. Yan et al.   ACTA MATERIALIA

Unveiling the formation of basal texture variations based on twinning and dynamic recrystallization in AZ31 magnesium alloy during extrusion

(2018) M.G. Jiang et al.   ACTA MATERIALIA

Solute strengthening of basal slip in Mg alloys

(2018) A. Tehranchi et al.   ACTA MATERIALIA

Dynamic recrystallization and texture evolution of Ti-22Al-25Nb alloy during plane-strain compression

(2018) Yang Wu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Achieving room temperature superplasticity in the Zn-0.5Cu alloy processed via equal channel angular pressing

(2018) Wiktor Bednarczyk et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Discontinuous dynamic recrystallization in α-Zr

(2018) Rajeev Kapoor et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Twinning, dynamic recrystallization, and crack in AZ31 magnesium alloy during high strain rate plane strain compression across a wide temperature

(2018) X. Liu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Transition of dynamic recrystallization mechanisms of as-cast AZ31 Mg alloys during hot compression

(2018) C. Xie et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Strain rate sensitivity in commercial pure titanium: The competition between slip and deformation twinning

(2018) Qinmeng Luan et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Evaluation of wrought Zn-Al alloys (1, 3, and 5 wt % Al) through mechanical and in vivo testing for stent applications

(2017) Patrick K. Bowen et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS

Zn-Li alloy after extrusion and drawing: Structural, mechanical characterization, and biodegradation in abdominal aorta of rat

(2017) Shan Zhao et al.   Materials Science & Engineering C-Materials for Biological Applications

Fabrication, mechanical properties and in vitro degradation behavior of newly developed Zn Ag alloys for degradable implant applications

(2017) M. Sikora-Jasinska et al.   Materials Science & Engineering C-Materials for Biological Applications

The Prospects of Zinc as a Structural Material for Biodegradable Implants—A Review Paper

(2017) Galit Katarivas Levy et al.   Metals

Zinc subjected to plastic deformation by complex loading and conventional extrusion: Comparison of the microstructure and mechanical properties

(2017) K. Pieła et al.   MATERIALS & DESIGN

Atomistic simulation of solid solution hardening in Mg/Al alloys: Examination of composition scaling and thermo-mechanical relationships

(2016) Peng Yi et al.   ACTA MATERIALIA

Formation of {112¯1} twin boundaries in titanium by kinking mechanism through accumulative dislocation slip

(2016) Shenbao Jin et al.   ACTA MATERIALIA

Orientation dependence of the deformation kink band formation behavior in Zn single crystal

(2016) Koji Hagihara et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Hot deformation behavior of Mg-4Li-1Al alloy via hot compression tests

(2016) Seyed Alireza Askariani et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Processing of a Novel Zn Alloy Micro-Tube for Biodegradable Vascular Stent Application

(2016) Chang Wang et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Novel Zn-based alloys for biodegradable stent applications: Design, development and in vitro degradation

(2016) E. Mostaed et al.   Journal of the Mechanical Behavior of Biomedical Materials

Microstructure, mechanical properties, in vitro degradation behavior and hemocompatibility of novel Zn–Mg–Sr alloys as biodegradable metals

(2016) Xiwei Liu et al.   MATERIALS LETTERS

Structure, mechanical characteristics and in vitro degradation, cytotoxicity, genotoxicity and mutagenicity of novel biodegradable Zn–Mg alloys

(2016) J. Kubásek et al.   Materials Science & Engineering C-Materials for Biological Applications

Dynamic recrystallization mechanisms during high speed rolling of Mg–3Al–1Zn alloy sheets

(2016) Jing Su et al.   SCRIPTA MATERIALIA

Strength and ductility with {10͞11} — {10͞12} double twinning in a magnesium alloy

(2016) M. Lentz et al.   Nature Communications

Dynamic recrystallization behaviors of a Mg-4Y-2Nd-0.2Zn-0.5Zr alloy and the resultant mechanical properties after hot compression

(2016) Zhirou Zhang et al.   MATERIALS & DESIGN

A review of dynamic recrystallization phenomena in metallic materials

(2016) K. Huang et al.   MATERIALS & DESIGN

Role of starting texture and deformation modes on low-temperature shear formability and shear localization of Mg–3Al–1Zn alloy

(2015) E. Dogan et al.   ACTA MATERIALIA

Microscopic deformation and strain hardening analysis of ferrite–bainite dual-phase steels using micro-grid method

(2015) Nobuyuki Ishikawa et al.   ACTA MATERIALIA

Effect of grain size on slip activity in pure magnesium polycrystals

(2015) C.M. Cepeda-Jiménez et al.   ACTA MATERIALIA

Twin recrystallization mechanisms in magnesium-rare earth alloys

(2015) I. Basu et al.   ACTA MATERIALIA

Strain rate and temperature effects on the selection of primary and secondary slip and twinning systems in HCP Zr

(2015) Marko Knezevic et al.   ACTA MATERIALIA

Twinning, recrystallization and texture development during multi-directional impact forging in an AZ61 Mg alloy

(2015) M.G. Jiang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Design and characterizations of novel biodegradable ternary Zn-based alloys with IIA nutrient alloying elements Mg, Ca and Sr

(2015) Huafang Li et al.   MATERIALS & DESIGN

Recent advances on the development of magnesium alloys for biodegradable implants

(2014) Yongjun Chen et al.   Acta Biomaterialia

Mechanisms of exceptional ductility of magnesium single crystal during deformation at room temperature: Multiple twinning and dynamic recrystallization

(2014) Konstantin D. Molodov et al.   ACTA MATERIALIA

Effects of Mg on microstructure and corrosion properties of Zn–Mg alloy

(2014) Caizhen Yao et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Zinc Exhibits Ideal Physiological Corrosion Behavior for Bioabsorbable Stents

(2013) Patrick K. Bowen et al.   ADVANCED MATERIALS

Solute strengthening of prismatic slip, basal slip and twinning in Mg and Mg–Zn binary alloys

(2013) N. Stanford et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Grain size effect on deformation twinning propensity in ultrafine-grained hexagonal close-packed titanium

(2013) J.L. Sun et al.   SCRIPTA MATERIALIA

On the relation between the microstructure and the mechanical behavior of pure Zn processed by high pressure torsion

(2012) B. Srinivasarao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Mechanical and corrosion properties of newly developed biodegradable Zn-based alloys for bone fixation

(2011) D. Vojtěch et al.   Acta Biomaterialia

Role of twinning and slip during compressive deformation of beryllium as a function of strain rate

(2011) D.W. Brown et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Twinning, dynamic recovery and recrystallization in the hot rolling process of twin-roll cast AZ31B alloy

(2011) Zhen Zhang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure evolution and nanograin formation during shear localization in cold-rolled titanium

(2010) D.K. Yang et al.   ACTA MATERIALIA

Evolution of microstructure and microtexture during the hot deformation of Mg–3% Al

(2010) Étienne Martin et al.   ACTA MATERIALIA

Mechanical behavior and microstructural evolution of a Mg AZ31 sheet at dynamic strain rates

(2010) I. Ulacia et al.   ACTA MATERIALIA

Role of {10–12} twinning characteristics in the deformation behavior of a polycrystalline magnesium alloy

(2010) Seong-Gu Hong et al.   ACTA MATERIALIA

Orientation dependent slip and twinning during compression and tension of strongly textured magnesium AZ31 alloy

(2010) T. Al-Samman et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Distribution Characteristics of In-Grain Misorientation Axes in Cold-Rolled Commercially Pure Titanium and Their Correlation with Active Slip Modes

(2010) Y. B. Chun et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Microstructural evolution of cast Mg–Al–Zn during friction stir processing and subsequent aging

(2009) A.H. Feng et al.   ACTA MATERIALIA

Dislocation evolution in titanium during surface severe plastic deformation

(2009) Ming Wen et al.   APPLIED SURFACE SCIENCE

Continuous dynamic recrystallization during the transient severe deformation of aluminum alloy 7475

(2008) T. Sakai et al.   ACTA MATERIALIA

Dynamic recrystallization during high temperature deformation of magnesium

(2008) T. Al-Samman et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING