Nucleation and growth of Fe-rich phases in Al-5Ti-1B modified Al-Fe alloys investigated using synchrotron X-ray imaging and electron microscopy

Insight into Si poisoning on grain refinement of Al-Si/Al-5Ti-B system

(2020) Yang Li et al.   ACTA MATERIALIA

Thermodynamics and kinetics of phase transformation in rare earth–magnesium alloys: A critical review

(2020) Qun Luo et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Understanding grain refining and anti Si-poisoning effect in Al-10Si/Al-5Nb-B system

(2020) Yang Li et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

In-situ observation of grain refinement dynamics of hypoeutectic Al-Si alloy inoculated by Al-Ti-Nb-B alloy

(2020) Jin Xu et al.   SCRIPTA MATERIALIA

Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging

(2019) Ross Cunningham et al.   SCIENCE

Mechanistic understanding on the evolution of nanosized Al3Fe phase in Al–Fe alloy during heat treatment and its effect on mechanical properties

(2019) X. Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Structure and mechanical behavior of ultrafine-grained aluminum-iron alloy stabilized by nanoscaled intermetallic particles

(2019) Amandine Duchaussoy et al.   ACTA MATERIALIA

Developing high performance mechanical properties at elevated temperature in squeeze cast Al-Cu-Mn-Fe-Ni alloys

(2019) Bo Lin et al.   MATERIALS CHARACTERIZATION

Growth of β intermetallic in an Al-Cu-Si alloy during directional solidification via machine learned 4D quantification

(2019) B. Cai et al.   SCRIPTA MATERIALIA

3D characterization of ultrasonic melt processing on the microstructural refinement of Al Cu alloys using synchrotron X-ray tomography

(2019) Yuliang Zhao et al.   MATERIALS CHARACTERIZATION

Dendrite fragmentation induced by massive-like δ–γ transformation in Fe–C alloys

(2019) Hideyuki Yasuda et al.   Nature Communications

The Role of Grain Refiner in the Nucleation of AlFeSi Intermetallic Phases During Solidification of a 6xxx Aluminum Alloy

(2019) A. Lui et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Effect of Compound Fields of Ultrasonic Vibration and Applied Pressure on the 3D Microstructure and Tensile Properties of Recycled Al-Cu-Mn-Fe-Si Alloys

(2019) Yuliang Zhao et al.   Materials

Ultrafast synchrotron X-ray imaging studies of microstructure fragmentation in solidification under ultrasound

(2018) Bing Wang et al.   ACTA MATERIALIA

Microstructural evolution and growth behavior of intermetallic compounds at the liquid Al/solid Fe interface by synchrotron X-ray radiography

(2018) Zongye Ding et al.   MATERIALS CHARACTERIZATION

Strengthening die-cast Al-Mg and Al-Mg-Mn alloys with Fe as a beneficial element

(2018) Xiangzhen Zhu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

An in-situ method to estimate the tip temperature and phase selection of secondary Fe-rich intermetallics using synchrotron X-ray radiography

(2018) S. Feng et al.   SCRIPTA MATERIALIA

3D characterisation of the Fe-rich intermetallic phases in recycled Al alloys by synchrotron X-ray microtomography and skeletonisation

(2018) Y. Zhao et al.   SCRIPTA MATERIALIA

Effect of Si addition and applied pressure on microstructure and tensile properties of as-cast Al-5.0Cu-0.6Mn-1.2Fe alloys

(2018) Wei-wen ZHANG et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Crystal nucleation in metallic alloys using x-ray radiography and machine learning

(2018) Enzo Liotti et al.   Science Advances

Synchrotron X-ray tomography investigation of 3D morphologies of intermetallic phases and pores and their effect on the mechanical properties of cast Al-Cu alloys

(2018) Yuliang Zhao et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effects of Er addition on the crystallization characteristic and microstructure of Al-2wt%Fe cast alloy

(2018) Y.H. Liang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of Si on Fe-rich intermetallic formation and mechanical properties of heat-treated Al–Cu–Mn–Fe alloys

(2017) Yuliang Zhao et al.   JOURNAL OF MATERIALS RESEARCH

Effect of ingot grain refinement on the tensile properties of 2024 Al alloy sheets

(2017) Wei Haigen et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Comprehensive Determination of Kinetic Parameters in Solid-State Phase Transitions: An Extended Jonhson–Mehl–Avrami–Kolomogorov Model with Analytical Solutions

(2016) Yuepeng Pang et al.   CRYSTAL GROWTH & DESIGN

Recent advances in grain refinement of light metals and alloys

(2016) M.A. Easton et al.   CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE

A review on kinetic models and corresponding analysis methods for hydrogen storage materials

(2016) Yuepeng Pang et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Influence of Grain Refiner Addition on the Precipitation of Fe-Rich Phases in Secondary AlSi7Cu3Mg Alloys

(2016) Jovid Rakhmonov et al.   International Journal of Metalcasting

Effect of potent TiB 2 addition levels and impurities on the grain refinement of Al

(2016) L. Zhou et al.   JOURNAL OF ALLOYS AND COMPOUNDS

The Al-Rich Part of the Fe-Al Phase Diagram

(2016) Xiaolin Li et al.   JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION

Influence of Al grain structure on Fe bearing intermetallics during DC casting of an Al-Mg-Si alloy

(2016) S. Kumar et al.   MATERIALS CHARACTERIZATION

Roles of Alloy Composition and Grain Refinement on Hot Tearing Susceptibility of 7××× Aluminum Alloys

(2016) Q. L. Bai et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

PTCLab: free and open-source software for calculating phase transformation crystallography

(2016) X.-F. Gu et al.   JOURNAL OF APPLIED CRYSTALLOGRAPHY

Breaking through the strength-ductility trade-off dilemma in an Al-Si-based casting alloy

(2016) B. Dang et al.   Scientific Reports

Grain refining mechanism in the Al/Al–Ti–B system

(2015) Z. Fan et al.   ACTA MATERIALIA

Texture, local misorientation, grain boundary and recrystallization fraction in pipeline steels related to hydrogen induced cracking

(2015) M.A. Mohtadi-Bonab et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and mechanical properties of rare-earth-modified Al−1Fe binary alloys

(2015) Z.M. Shi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of Al–5Ti–1B grain refiner on the microstructure, mechanical properties and acoustic emission characteristics of Al5052 aluminium alloy

(2015) Amulya Bihari Pattnaik et al.   Journal of Materials Research and Technology-JMR&T

In situ quantification of the nucleation and growth of Fe-rich intermetallics during Al alloy solidification

(2014) C. Puncreobutr et al.   ACTA MATERIALIA

Grain refinement limit and mechanical properties of 6063 alloy inoculated by Al–Ti–C (B) master alloys

(2014) Enzhao Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Removal of Vanadium from Molten Aluminum—Part III. Analysis of Industrial Boron Treatment Practice

(2014) Abdul Khaliq et al.   METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE

PITRE: software for phase-sensitive X-ray image processing and tomography reconstruction

(2012) Rong-Chang Chen et al.   JOURNAL OF SYNCHROTRON RADIATION

The Effect of Al-5Ti-1B on Microstructure and Mechanical Properties of Al-12Si-xFe Alloy

(2011) Sergio Haro Rodríguez et al.   MATERIALS AND MANUFACTURING PROCESSES

Removal of Iron From Aluminum: A Review

(2011) Lifeng Zhang et al.   Mineral Processing and Extractive Metallurgy Review

Crystallographic features of the primary Al3Fe phase in as-cast Al–3.31wt% Fe alloy

(2010) Lei Li et al.   JOURNAL OF APPLIED CRYSTALLOGRAPHY

Cellular growth during transient directional solidification of hypoeutectic Al–Fe alloys

(2008) Pedro R. Goulart et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Measurement of local plastic strain distribution of stainless steel by electron backscatter diffraction

(2008) Masayuki Kamaya   MATERIALS CHARACTERIZATION