Effect of Compound Fields of Ultrasonic Vibration and Applied Pressure on the 3D Microstructure and Tensile Properties of Recycled Al-Cu-Mn-Fe-Si Alloys

Scalable Ultrasound-Assisted Casting of Ultra-large 2219 Al Alloy Ingots

(2019) Zhilin Liu et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Precipitation strengthening of aluminum alloys by room-temperature cyclic plasticity

(2019) Wenwen Sun et al.   SCIENCE

Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging

(2019) Ross Cunningham et al.   SCIENCE

Developing high performance mechanical properties at elevated temperature in squeeze cast Al-Cu-Mn-Fe-Ni alloys

(2019) Bo Lin et al.   MATERIALS CHARACTERIZATION

Development of high strength and toughness nano-SiCp/A356 composites with ultrasonic vibration and squeeze casting

(2019) Du Yuan et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

3D characterization of ultrasonic melt processing on the microstructural refinement of Al Cu alloys using synchrotron X-ray tomography

(2019) Yuliang Zhao et al.   MATERIALS CHARACTERIZATION

Effects of high-intensity ultrasound on the microstructures and mechanical properties of ultra-large 2219 Al alloy ingot

(2019) Li Zhang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Synergistic effect of ultrasonic melt treatment and fast cooling on the refinement of primary Si in a hypereutectic Al–Si alloy

(2018) Jae-Gil Jung et al.   ACTA MATERIALIA

Ultrafast synchrotron X-ray imaging studies of microstructure fragmentation in solidification under ultrasound

(2018) Bing Wang et al.   ACTA MATERIALIA

Microstructures and properties of in situ ZrB 2 /AA6111 composites synthesized under a coupled magnetic and ultrasonic field

(2018) Ran Tao et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Influence of impurities, strontium addition and cooling rate on microstructure evolution in Al-10Si-0.3Fe casting alloys

(2018) J.M. Yu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

The Influence of Ultrasonic Cavitation on the Formation of Fe-Rich Intermetallics in A383 Alloy

(2018) Yang Xuan et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

3D characterisation of the Fe-rich intermetallic phases in recycled Al alloys by synchrotron X-ray microtomography and skeletonisation

(2018) Y. Zhao et al.   SCRIPTA MATERIALIA

Effect of Si addition and applied pressure on microstructure and tensile properties of as-cast Al-5.0Cu-0.6Mn-1.2Fe alloys

(2018) Wei-wen ZHANG et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Synchrotron X-ray tomography investigation of 3D morphologies of intermetallic phases and pores and their effect on the mechanical properties of cast Al-Cu alloys

(2018) Yuliang Zhao et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Ultrasonic assisted squeeze casting of a wrought aluminum alloy

(2018) Gang Chen et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Effect of solution heat treatment on microstructure and damage accumulation in cast Al-Cu alloys

(2017) R. Fernández Gutiérrez et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of Si on Fe-rich intermetallic formation and mechanical properties of heat-treated Al–Cu–Mn–Fe alloys

(2017) Yuliang Zhao et al.   JOURNAL OF MATERIALS RESEARCH

The Effect of Ultrasonic Melt Treatment on Macro-Segregation and Peritectic Transformation in an Al-19Si-4Fe Alloy

(2017) C. J. Todaro et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Recent advances in grain refinement of light metals and alloys

(2016) M.A. Easton et al.   CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE

Effect of applied pressure and ultrasonic vibration on microstructure and microhardness of Al—5.0Cu alloy

(2016) Yang ZHANG et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Formation of Fe-rich intermetallic compounds and their effect on the tensile properties of squeeze-cast Al–Cu alloys

(2015) Wei-wen Zhang et al.   JOURNAL OF MATERIALS RESEARCH

Microstructure and Mechanical Properties of Al-8 pct Si Alloy Prepared by Direct Chill Casting Under Electromagnetic and Ultrasonic Fields

(2013) Yubo Zhang et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Effects of Mn content on microstructures and mechanical properties of Al-5.0Cu-0.5Fe alloys prepared by squeeze casting

(2013) Wei-wen ZHANG et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

NIH Image to ImageJ: 25 years of image analysis

(2012) Caroline A Schneider et al.   NATURE METHODS

Precipitation of partially coherent α-Al(Mn,Fe)Si dispersoids and their strengthening effect in AA 3003 alloy

(2011) Y.J. Li et al.   ACTA MATERIALIA

Removal of Iron From Aluminum: A Review

(2011) Lifeng Zhang et al.   Mineral Processing and Extractive Metallurgy Review

Structure–property correlations in Al 7050 and Al 7055 high-strength aluminum alloys

(2007) M. Dixit et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING