Microstructure evolution and mechanical responses of Al–Zn–Mg–Cu alloys during hot deformation process
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Microstructure evolution and mechanical responses of Al–Zn–Mg–Cu alloys during hot deformation process
Authors
Keywords
-
Journal
JOURNAL OF MATERIALS SCIENCE
Volume 56, Issue 24, Pages 13429-13478
Publisher
Springer Science and Business Media LLC
Online
2021-05-26
DOI
10.1007/s10853-021-06095-7
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Modelling continuous dynamic recrystallization of aluminum alloys based on the polycrystal plasticity approach
- (2020) S.F. Chen et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Quasi-static and dynamic response, and texture evolution of two overaged Al 7056 alloy plates in T761 and T721 tempers: Experiments and modeling
- (2020) Angela Y. Ku et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Hot Workability Characteristics and Optimization of Processing Parameters of 7475 Aluminum Alloy Using 3D Processing Map
- (2020) Yang Liu et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Effect of Grain Structure on Recrystallization Behavior of Al-Zn-Mg-Cu Alloy during Isothermal Forging
- (2020) Jiuhui Zhao et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Recent Development of Superplasticity in Aluminum Alloys: A Review
- (2020) Laxman Bhatta et al. Metals
- Hot Deformation Behavior Considering Strain Effects and Recrystallization Mechanism of an Al-Zn-Mg-Cu Alloy
- (2020) Lei Luo et al. Materials
- Effects of deformation parameters and stress triaxiality on the fracture behaviors and microstructural evolution of an Al-Zn-Mg-Cu alloy
- (2020) Y.C. Lin et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Improvement of anisotropic tensile properties of Al-7.9Zn-2.7Mg-2.0Cu alloy sheets by particle stimulated nucleation
- (2020) Qianhao Zang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Experimental study of the superplastic deformation mechanisms of high-strength aluminum-based alloy
- (2020) O.A. Yakovtseva et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Grain refining with DDRX by isothermal MDF of Al-Zn-Mg-Cu alloy
- (2020) Jiuhui Zhao et al. Journal of Materials Research and Technology-JMR&T
- Diffusional and dislocation accommodation mechanisms in superplastic materials
- (2020) Hiroshi Masuda et al. ACTA MATERIALIA
- The effect of strain rates on the microstructure and the mechanical properties of an over-aged Al-Zn-Mg-Cu alloy
- (2020) Muhammad Abubaker Khan et al. MATERIALS CHARACTERIZATION
- Rheological behavior and dynamic softening mechanism of AA7075 sheet under isothermal tensile deformation
- (2020) Jue Lu et al. Journal of Materials Research and Technology-JMR&T
- A Review of Microstructural Evolution and Modelling of Aluminium Alloys under Hot Forming Conditions
- (2020) Jiaxin Lv et al. Metals
- Effects of Initial Grain Size of Al-Zn-Mg-Cu Alloy on the Recrystallization Behavior and Recrystallization Mechanism in Isothermal Compression
- (2019) Jiuhui Zhao et al. Metals
- Grain structure and precipitate variations in 7003-T6 aluminum alloys associated with high strain rate deformation
- (2019) Hong He et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Quantification of multiple softening processes occurring during multi-stage thermoforming of high-strength steel
- (2019) Rong Zeng et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Effects of initial microstructure on hot deformation behavior of Al-7.9Zn-2.7Mg-2.0Cu (wt%) alloy
- (2019) Qianhao Zang et al. MATERIALS CHARACTERIZATION
- Effect of temperature and strain rate on the grain structure during the multi-directional forging of the Al Zn Mg Cu alloy
- (2019) Jiuhui Zhao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Precipitation behavior and high strain rate superplasticity in a novel fine-grained aluminum based alloy
- (2019) A.V. Mikhaylovskaya et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Simulation of dynamic recrystallization for an Al-Zn-Mg-Cu alloy using cellular automaton
- (2019) Jie Zhang et al. Progress in Natural Science-Materials International
- Mechanical behavior and deformation mechanism of 7075 aluminum alloy under solution induced dynamic strain aging
- (2019) Pu Zhou et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Constructing processing maps for hot deformation and microstructural evolution of Al–Zn–Mg–Cu alloys
- (2019) Guohui Shi et al. Materials Research Express
- Influence of homogenisation time on evolution of eutectic phases, dispersoid behaviour and crystallographic texture for Al–Zn–Mg–Cu–Ag alloy
- (2019) Abhishek Ghosh et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Superplastic Tensile Deformation Behavior and Microstructural Evolution of Al–Zn–Mg–Cu Alloy
- (2019) Guangyu Li et al. Metals
- Influence of strain rate on hot deformation behavior and recrystallization behavior under isothermal compression of Al-Zn-Mg-Cu alloy
- (2019) Jiuhui Zhao et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Mechanisms of Superplastic High-Rate Deformation in the Al–Mg–Zn–Fe–Ni–Zr–Sc Alloy
- (2019) O. A. Yakovtseva et al. PHYSICS OF METALS AND METALLOGRAPHY
- Review on modeling and simulation of microstructure evolution during dynamic recrystallization using cellular automaton method
- (2019) HuaJia Zhu et al. Science China-Technological Sciences
- On Kinetics of Grain Refinement and Strengthening by Dynamic Recrystallization
- (2018) Andrey Belyakov et al. ADVANCED ENGINEERING MATERIALS
- Modeling of continuous dynamic recrystallization of Al-Zn-Cu-Mg alloy during hot deformation based on the internal-state-variable (ISV) method
- (2018) Z.C. Sun et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Effect of temperature of isothermal multidirectional forging on microstructure development in the Al-Mg alloy with nano-size aluminides of Sc and Zr
- (2018) O. Sitdikov et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Hot deformation behavior and microstructure evolution of annealed Al-7.9Zn-2.7Mg-2.0Cu (wt%) alloy
- (2018) Qianhao Zang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A physically-based constitutive modelling of a high strength aluminum alloy at hot working conditions
- (2018) Hongming Zhang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Study on hot compressive deformation behaviors and corresponding industrial extrusion of as-homogenized Al–7.82Zn–1.96Mg–2.35Cu–0.11Zr alloy
- (2018) Weiyi Wang et al. JOURNAL OF MATERIALS SCIENCE
- Characterization of hot extrusion and heat treatment on mechanical properties in a spray formed ultra-high strength Al-Zn-Mg-Cu alloy
- (2018) Xiangdong Wang et al. MATERIALS CHARACTERIZATION
- Constitutive descriptions and microstructure evolution of extruded A5083 aluminum alloy during hot compression
- (2018) Sheng Ding et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Comparison between superplastic deformation mechanisms at primary and steady stages of the fine grain AA7475 aluminium alloy
- (2018) A.V. Mikhaylovskaya et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Al-Mg-Fe-Ni based alloy for high strain rate superplastic forming
- (2018) A.A. Kishchik et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Development of adiabatic shearing bands in 7003-T4 aluminum alloy under high strain rate impacting
- (2018) Xiaodong Wu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Back-stresses and geometrical hardening as competing mechanisms enhancing ductility in HCP metals
- (2018) D. Esqué-de los Ojos et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A unified constitutive model based on dislocation density for an Al-Zn-Mg-Cu alloy at time-variant hot deformation conditions
- (2018) Y.C. Lin et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of strain rate on the recrystallization mechanism during isothermal compression in 7050 aluminum alloy
- (2018) Jiuhui Zhao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of strain rate and temperature on dynamic mechanical behavior and microstructure evolution of ultra-high strength aluminum alloy
- (2018) Weiliang Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The double-edge effect of second-phase particles on the recrystallization behaviour and associated mechanical properties of metallic materials
- (2018) Ke Huang et al. PROGRESS IN MATERIALS SCIENCE
- Dynamic anisotropic grain growth during superplasticity in Al–Mg–Mn alloy
- (2018) Hiroshi Masuda et al. SCRIPTA MATERIALIA
- Effects of Temperature and Strain Rate on the Fracture Behaviors of an Al-Zn-Mg-Cu Alloy
- (2018) Yue Guo et al. Materials
- A Review on Superplastic Formation Behavior of Al Alloys
- (2018) Xiao-guo Wang et al. Advances in Materials Science and Engineering
- Analysis of flow stress and microstructure during hot compression of 6099 aluminum alloy (AA6099)
- (2018) Ahmad Chamanfar et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Cavity Behavior of Fine-Grained 5A70 Aluminum Alloy during Superplastic Formation
- (2018) Sheng Li et al. Metals
- Recent advances in ageing of 7xxx series aluminum alloys: A physical metallurgy perspective
- (2018) Abolfazl Azarniya et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Compressive deformation behavior and microstructure evolution of AM80 magnesium alloy under quasi-static and dynamic loading
- (2017) Pengcheng Guo et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Strength differential effect in age hardened aluminum alloys
- (2017) Jens Kristian Holmen et al. INTERNATIONAL JOURNAL OF PLASTICITY
- A polycrystal plasticity based discontinuous dynamic recrystallization simulation method and its application to copper
- (2017) Guowei Zhou et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Enhanced plasticity and corrosion resistance of high strength Al-Zn-Mg-Cu alloy processed by an improved thermomechanical processing
- (2017) Jinrong Zuo et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Dislocation substructures evolution and an adaptive-network-based fuzzy inference system model for constitutive behavior of a Ni-based superalloy during hot deformation
- (2017) Dong-Dong Chen et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Heating rate effect on particle stimulated nucleation and grains structure during non-isothermal annealing of multi-directionally forged solution treated AA2024
- (2017) Saeed Khani Moghanaki et al. MATERIALS CHARACTERIZATION
- Effect of deformation induced precipitation on grain refinement and improvement of mechanical properties AA 7055 aluminum alloy
- (2017) Jinrong Zuo et al. MATERIALS CHARACTERIZATION
- Hot deformation behavior and microstructure of AA2195 alloy under plane strain compression
- (2017) Qingbo Yang et al. MATERIALS CHARACTERIZATION
- High strain rate superplasticity in an Al–Mg–Sc–Zr alloy processed via simple rolling
- (2017) Mengjia Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Stacking fault tetrahedron induced plasticity in copper single crystal
- (2017) Liang Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Flow Behavior and Microstructural Evolution of 7A85 High-Strength Aluminum Alloy During Hot Deformation
- (2017) Xingang Liu et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Analysis of Particle-Stimulated Nucleation (PSN)-Dominated Recrystallization for Hot-Rolled 7050 Aluminum Alloy
- (2017) Khaled F. Adam et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- A review on the strain rate dependency of the dynamic viscoplastic response of FCC metals
- (2017) Francisco C. Salvado et al. PROGRESS IN MATERIALS SCIENCE
- Evaluation of the mechanical anisotropy and the deformation mechanism in a multi-pass friction stir processed Al-Zn-Mg-Cu alloy
- (2017) Alberto Orozco-Caballero et al. MATERIALS & DESIGN
- Recrystallization behavior of multi-directionally forged over-aged and solution treated Al-Cu-Mg alloy during non-isothermal annealing
- (2017) Saeed Khani Moghanaki et al. MATERIALS & DESIGN
- Multi-scale study of microstructure evolution in hot extruded nano-sized TiB 2 particle reinforced aluminum composites
- (2017) Z. Chen et al. MATERIALS & DESIGN
- Two-dimensional grain boundary sliding and mantle dislocation accommodation in ODS ferritic steel
- (2016) Hiroshi Masuda et al. ACTA MATERIALIA
- On the mechanisms of superplasticity in Ti–6Al–4V
- (2016) E. Alabort et al. ACTA MATERIALIA
- Deformation behavior and microstructural evolution of 7075-T6 aluminum alloy at cryogenic temperatures
- (2016) Woei-Shyan Lee et al. CRYOGENICS
- A three-dimensional cellular automata-crystal plasticity finite element model for predicting the multiscale interaction among heterogeneous deformation, DRX microstructural evolution and mechanical responses in titanium alloys
- (2016) Hongwei Li et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Study on Hot Workability of Al-5.87Zn-2.07Mg-2.28Cu Alloy Using Processing Map
- (2016) Dan Xiao et al. JOM
- Superplasticity of high-strength Al-based alloys produced by thermomechanical treatment
- (2016) A.D. Kotov et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Difference in the Hot Compressive Behavior and Processing Maps between the As-cast and Homogenized Al-Zn-Mg-Cu (7075) Alloys
- (2016) S.Y. Park et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Flow behavior and microstructure evolution of 7055 aluminum alloy impacted at high strain rates
- (2016) Shengdan Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of strain rate on flow stress behavior and dynamic recrystallization mechanism of Al-Zn-Mg-Cu aluminum alloy during hot deformation
- (2016) Qunying Yang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Superplastic behaviour of Al-Mg-Zn-Zr-Sc-based alloys at high strain rates
- (2016) A.V. Mikhaylovskaya et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of microstructure on hot tensile deformation behavior of 7075 alloy sheet fabricated by twin roll casting
- (2016) Lei Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Shear strain localization in AA 2219-T8 aluminum alloy at high strain rates
- (2016) G.M. Owolabi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Hot deformation behavior and constitutive equation of a new type Al–Zn–Mg–Er–Zr alloy during isothermal compression
- (2016) H. Wu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Modeling of flow behavior for 7050-T7451 aluminum alloy considering microstructural evolution over a wide range of strain rates
- (2016) Guang Chen et al. MECHANICS OF MATERIALS
- A Study on the Effect of Strain Rate on the Dynamic Recrystallization Mechanism of Alloy 617B
- (2016) He Jiang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Dynamic recrystallization behavior of 7085 aluminum alloy during hot deformation
- (2016) Dong-feng LI et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Physically based constitutive analysis and microstructural evolution of AA7050 aluminum alloy during hot compression
- (2016) S. Wang et al. MATERIALS & DESIGN
- Microstructural evolution and constitutive equations of Inconel 718 alloy under quasi-static and quasi-dynamic conditions
- (2016) M. Azarbarmas et al. MATERIALS & DESIGN
- A review of dynamic recrystallization phenomena in metallic materials
- (2016) K. Huang et al. MATERIALS & DESIGN
- Tensile behaviour of aluminium 7017 alloy at various temperatures and strain rates
- (2016) Ravindranadh Bobbili et al. Journal of Materials Research and Technology-JMR&T
- Microstructural evolution of a 304-type austenitic stainless steel during rolling at temperatures of 773–1273 K
- (2015) Zhanna Yanushkevich et al. ACTA MATERIALIA
- Coupled crystal plasticity – Probabilistic cellular automata approach to model dynamic recrystallization in magnesium alloys
- (2015) E. Popova et al. INTERNATIONAL JOURNAL OF PLASTICITY
- A new method for fabrication of in situ Al/Al 3 Ti–Al 2 O 3 nanocomposites based on thermal decomposition of nanostructured tialite
- (2015) Abolfazl Azarniya et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Dynamic restoration mechanism and physically based constitutive model of 2050 Al–Li alloy during hot compression
- (2015) Ruihua Zhu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- EBSD study of a hot deformed nickel-based superalloy
- (2015) Y.C. Lin et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of heterogeneously distributed pre-existing dispersoids on the recrystallization behavior of a cold-rolled Al–Mn–Fe–Si alloy
- (2015) K. Huang et al. MATERIALS CHARACTERIZATION
- Dynamic behavior of a 6069 Al alloy under hot compression
- (2015) Feng-jun Zhu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Hot ductility behavior of an extruded 7075 aluminum alloy
- (2015) M. Taheri-Mandarjani et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Hot tensile deformation behavior of twin roll casted 7075 aluminum alloy
- (2015) Lei Wang et al. METALS AND MATERIALS INTERNATIONAL
- Thermal decomposition of nanostructured Aluminum Titanate in an active Al matrix: A novel approach to fabrication of in situ Al/Al 2 O 3 –Al 3 Ti composites
- (2015) Abolfazl Azarniya et al. MATERIALS & DESIGN
- A high-strength aluminium-based alloy with advanced superplasticity
- (2014) A.V. Mikhaylovskaya et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Determination of Johnson–Cook Parameters for Cast Aluminum Alloys
- (2014) Sachin Gupta et al. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
- Hot tensile deformation behaviors and constitutive model of an Al–Zn–Mg–Cu alloy
- (2014) Mi Zhou et al. MATERIALS & DESIGN
- Relationship between mechanical properties and microstructural response of 6061-T6 aluminum alloy impacted at elevated temperatures
- (2014) Woei-Shyan Lee et al. MATERIALS & DESIGN
- A physical-based constitutive relation to predict flow stress for Cu–0.4Mg alloy during hot working
- (2014) Guoliang Ji et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Mechanical properties of 7475 aluminum alloy sheets with fine subgrain structure by warm rolling
- (2014) Hiroki TANAKA et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Microstructural Evolutions of AA7055 Aluminum Alloy Under Dynamic and Quasi-static Compressions
- (2014) Yuanyuan Xiong et al. Acta Metallurgica Sinica-English Letters
- Microstructural Evolution and Dynamic Softening Mechanisms of Al-Zn-Mg-Cu Alloy during Hot Compressive Deformation
- (2014) Cangji Shi et al. Materials
- Failure of AA 6061 and 2099 aluminum alloys under dynamic shock loading
- (2013) A.G. Odeshi et al. ENGINEERING FAILURE ANALYSIS
- Crystal plasticity modeling of the dynamic recrystallization of two-phase titanium alloys during isothermal processing
- (2013) Hongwei Li et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Analysis of Nonisothermal Deep Drawing of Aluminum Alloy Sheet With Induced Anisotropy and Rate Sensitivity at Elevated Temperatures
- (2013) Kamyar Ghavam et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- The effects of grain size on the hot deformation and processing map for 7075 aluminum alloy
- (2013) Yongbiao Yang et al. MATERIALS & DESIGN
- Constitutive modeling of deformation in high temperature of a forging 6005A aluminum alloy
- (2013) L. Shi et al. MATERIALS & DESIGN
- On the interactions between strain path reversal and dynamic recrystallisation in 316L stainless steel studied by hottorsion
- (2013) L. Sun et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of Zr addition on hot deformation behavior and microstructural evolution of AA7150 aluminum alloy
- (2013) Cangji Shi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Hot deformation behavior of AA7085 aluminum alloy during isothermal compression at elevated temperature
- (2013) Wenyi Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Achieving superplasticity in ultrafine-grained metals
- (2013) Terence G. Langdon MECHANICS OF MATERIALS
- Dislocation annihilation in plastic deformation: II. Kocks–Mecking Analysis
- (2012) E.I. Galindo-Nava et al. ACTA MATERIALIA
- High-Strain-Rate Deformation: Mechanical Behavior and Deformation Substructures Induced
- (2012) George T. (Rusty) Gray Annual Review of Materials Research
- A characterization for the dynamic recrystallization kinetics of as-extruded 7075 aluminum alloy based on true stress–strain curves
- (2012) Guo-zheng Quan et al. COMPUTATIONAL MATERIALS SCIENCE
- Effects of Sc and Zr microalloying additions and aging time at 120°C on the corrosion behaviour of an Al–Zn–Mg alloy
- (2012) Ying Deng et al. CORROSION SCIENCE
- Variable strain rate sensitivity in an aluminum alloy: Response and constitutive modeling
- (2012) Akhtar S. Khan et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Effect of extrusion temperature on texture evolution and recrystallization in extruded Mg–1% Mn and Mg–1% Mn–1.6%Sr alloys
- (2012) Hemant Borkar et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Hot deformation and processing map of a typical Al–Zn–Mg–Cu alloy
- (2012) Y.C. Lin et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Foundation and application of Al–Zn–Mg–Cu alloy flow stress constitutive equation in friction screw press die forging
- (2012) Lei Xu et al. MATERIALS & DESIGN
- Study of hot deformation of an Al–Cu–Mg alloy using processing maps and microstructural characterization
- (2012) C.M. Cepeda-Jiménez et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The flow behavior and constitutive equations in isothermal compression of 7050 aluminum alloy
- (2012) B. Wu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Evaluation of thermal stability of ultrafine grained aluminium matrix composites reinforced with carbon nanotubes
- (2011) Joanna Lipecka et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Hot compressive deformation behavior of 7075 Al alloy under elevated temperature
- (2011) Y. C. Lin et al. JOURNAL OF MATERIALS SCIENCE
- High-temperature dynamic deformation of aluminum alloys using SHPB
- (2011) Ouk Sub Lee et al. Journal of Mechanical Science and Technology
- Particle effects on recrystallization in magnesium–manganese alloys: Particle pinning
- (2011) J.D. Robson et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure evolution and mechanical properties of back extruded 7075 aluminum alloy at elevated temperatures
- (2011) M.R. Rokni et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The deformation behavior and processing maps in the isothermal compression of 7A09 aluminum alloy
- (2011) J. Luo et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Cavitation During Superplastic Forming
- (2011) John Campbell Materials
- Dynamic grain growth and particle coarsening in Al–3.5Cu
- (2010) O.V. Rofman et al. ACTA MATERIALIA
- Evolution of microstructures and textures of 7050 Al alloy hot-rolled plate during staged solution heat-treatments
- (2010) Yun-Lai Deng et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A critical review of experimental results and constitutive descriptions for metals and alloys in hot working
- (2010) Y.C. Lin et al. MATERIALS & DESIGN
- Effects of pre-notches on the self-organization behaviors of shear bands in aluminum alloy
- (2010) Y. Yang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Hot rolling textures of Al–Cu–Li and Al–Zn–Mg–Cu aeronautical alloys: Experiments and simulations to high strains
- (2010) Q. Contrepois et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of microstructure on the adiabatic shearing behaviors of titanium alloy
- (2010) Y. Yang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A Study on Microstructural Evolution and Dynamic Recrystallization During Isothermal Deformation of a Ti-Modified Austenitic Stainless Steel
- (2010) Sumantra Mandal et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructure evolution of 7050 aluminum alloy during hot deformation
- (2010) Jun-peng LI et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Effect of second-phase particle morphology on grain growth kinetics
- (2009) Kunok Chang et al. ACTA MATERIALIA
- Modelling discontinuous dynamic recrystallization using a physically based model for nucleation
- (2009) D.G. Cram et al. ACTA MATERIALIA
- Diffusion creep and superplasticity in aluminium alloys
- (2009) K. Sotoudeh et al. ACTA MATERIALIA
- Improvement in formability of aluminum alloy sheet by enhancing geometrical hardening
- (2009) Kengo Yoshida et al. COMPUTATIONAL MATERIALS SCIENCE
- A dislocation density-based single crystal constitutive equation
- (2009) M.G. Lee et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Study of dynamic grain growth by electron microscopy and EBSD
- (2009) O.V. ROFMAN et al. JOURNAL OF MICROSCOPY
- Hot deformation and processing maps of an Al–5.7wt.%Mg alloy with erbium
- (2009) Gang Meng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of cooling rate after homogenization on the flow behavior of aluminum alloy 7050 under hot compression
- (2009) Shengdan Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Superplasticity, dynamic grain growth and deformation mechanism in ultra-light two-phase magnesium–lithium alloys
- (2009) F.R. Cao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Low-temperature superplasticity of Al–Mg–Sc alloy produced by friction stir processing
- (2009) F.C. Liu et al. SCRIPTA MATERIALIA
- Continuous dynamic recrystallization during the transient severe deformation of aluminum alloy 7475
- (2008) T. Sakai et al. ACTA MATERIALIA
- Hot deformation behavior of 7150 aluminum alloy during compression at elevated temperature
- (2008) Nengping Jin et al. MATERIALS CHARACTERIZATION
- Flow behavior and microstructural evolution of Al–Cu–Mg–Ag alloy during hot compression deformation
- (2008) Xiao Yan Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Superplastic Behavior of a High-Strength Al-Zn-Mg-Cu-Zr Alloy
- (2008) A. Kumar et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Hot Deformation and Recrystallization of Austenitic Stainless Steel: Part I. Dynamic Recrystallization
- (2008) A. Dehghan-Manshadi et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- A dislocation-based constitutive law for pure Zr including temperature effects
- (2007) I.J. Beyerlein et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Deformation behavior and microstructure evolution of 7050 aluminum alloy during high temperature deformation
- (2007) H.E. Hu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Prediction of 42CrMo steel flow stress at high temperature and strain rate
- (2007) Y.C. Lin et al. MECHANICS RESEARCH COMMUNICATIONS
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreFind the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
Search