- Home
- Publications
- Publication Search
- Publication Details
Title
Alloy design and adaptation for additive manufacture
Authors
Keywords
Additive manufacture, Alloy development, Powder bed fabrication, Directed energy deposition
Journal
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Volume -, Issue -, Pages 117358
Publisher
Elsevier BV
Online
2021-09-10
DOI
10.1016/j.jmatprotec.2021.117358
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- High Entropy Alloys – Tunability of Deformation Mechanisms Through Integration of Compositional and Microstructural Domains
- (2021) Rajiv S. Mishra et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Very-High-Cycle Fatigue Behavior of Inconel 718 Alloy Fabricated by Selective Laser Melting at Elevated Temperature
- (2021) Zongxian Song et al. Materials
- Design approaches for printability-performance synergy in Al alloys for laser-powder bed additive manufacturing
- (2021) Rajiv S. Mishra et al. MATERIALS & DESIGN
- Effect of heat treatment on microstructure and mechanical properties of Fe–Cr–Ni–Co–Mo maraging stainless steel produced by selective laser melting
- (2021) Piao Gao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The Evolution of Oxygen-Based Inclusions in an Additively Manufactured Super-Duplex Stainless Steel
- (2021) A. D. Iams et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effect of Heat Treatment on the Microstructure and Mechanical Properties of Selective Laser-Melted Ti64 and Ti-5Al-5Mo-5V-1Cr-1Fe
- (2021) Hongjie Bai et al. Metals
- Processing window for laser metal deposition of Al 7075 powder with minimized defects
- (2021) M.J. Benoit et al. Journal of Manufacturing Processes
- Powder Bed Fusion of nickel-based superalloys: A review
- (2021) Salomé Sanchez et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Laser cladding of aluminum alloy 6061 via off-axis powder injection
- (2021) Corbin M. Grohol et al. SURFACE & COATINGS TECHNOLOGY
- The creep behaviour of nickel alloy 718 manufactured by laser powder bed fusion
- (2021) S. Sanchez et al. MATERIALS & DESIGN
- Composition fine-tuning for directed energy deposition of Ti-6Al-4V
- (2021) Fengying Zhang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Tailoring grain morphology in Ti-6Al-3Mo through heterogeneous nucleation in directed energy deposition
- (2021) Fengying Zhang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Influence of microstructure and manganese sulfides on corrosion resistance of selective laser melted 17-4 PH stainless steel in acidic chloride medium
- (2020) Michella Alnajjar et al. CORROSION SCIENCE
- The role of side-branching in microstructure development in laser powder-bed fusion
- (2020) Minh-Son Pham et al. Nature Communications
- Grain structure control during metal 3D printing by high-intensity ultrasound
- (2020) C. J. Todaro et al. Nature Communications
- Laser calorimetry for assessment of melting behaviour in multi-walled carbon nanotube decorated aluminium by laser powder bed fusion
- (2020) Adam T. Clare et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Microstructure and mechanical properties of 316L austenitic stainless steel processed by different SLM devices
- (2020) A. Röttger et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of heat treatment on microstructures and tensile properties of TA19 alloy fabricated by laser metal deposition
- (2020) Fang Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- An investigation on the effect of deposition pattern on the microstructure, mechanical properties and residual stress of 316L produced by Directed Energy Deposition
- (2020) Abdollah Saboori et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Phase Studies of Additively Manufactured Near Beta Titanium Alloy-Ti55511
- (2020) Tuerdi Maimaitiyili et al. Materials
- Effect of TiB2 content on microstructural features and hardness of TiB2/AA7075 composites manufactured by LMD
- (2020) Zhenglong Lei et al. Journal of Manufacturing Processes
- High temperature air oxidation behavior of Hastelloy X processed by Electron Beam Melting (EBM) and Selective Laser Melting (SLM)
- (2020) M. Romedenne et al. CORROSION SCIENCE
- Direct observation of pore formation mechanisms during LPBF additive manufacturing process and high energy density laser welding
- (2020) S. Mohammad H. Hojjatzadeh et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Materials and manufacturing renaissance: Additive manufacturing of high-entropy alloys
- (2020) Jinyeon Kim et al. JOURNAL OF MATERIALS RESEARCH
- Effects of direct aging on near-alpha Ti–6Al–2Sn–4Zr–2Mo (Ti-6242) titanium alloy fabricated by selective laser melting (SLM)
- (2020) Haiyang Fan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of process parameters on the microstructure and mechanical properties of 24CrNiMo steel fabricated by selective laser melting
- (2020) Qing Wang et al. OPTICS AND LASER TECHNOLOGY
- Effects of Postprocess Hot Isostatic Pressing Treatments on the Mechanical Performance of EBM Fabricated TI-6Al-2Sn-4Zr-2Mo
- (2020) Miguel Lopez et al. Materials
- Hybrid manufacturing: a review of the synergy between directed energy deposition and subtractive processes
- (2020) José Luis Dávila et al. The International Journal of Advanced Manufacturing Technology
- Microstructure and fatigue crack growth behavior of Inconel 718 superalloy manufactured by laser directed energy deposition
- (2020) Xiaobin Yu et al. INTERNATIONAL JOURNAL OF FATIGUE
- Behavior of weld pool convection and columnar-to-equiaxed grain transition in gas tungsten arc welds of ferritic stainless steels with different aluminum contents
- (2020) Chan Kyu Kim et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Influences of residual stress and micro-deformation on microstructures and mechanical properties for Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy produced by laser powder bed fusion
- (2020) C.C. Zhang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Welding of Ti-5Al-5Mo-5 V-1Cr-1Fe parts manufactured in the Electron Beam Melting
- (2020) Marcin Madeja et al. MATERIALS & DESIGN
- Directed energy deposition of AlSi10Mg: Single track nonscalability and bulk properties
- (2020) Parnian Kiani et al. MATERIALS & DESIGN
- Influence of heat treatment on microstructure evolution and mechanical properties of TiB2/Al 2024 composites fabricated by directed energy deposition
- (2020) Bo Chen et al. Journal of Materials Research and Technology-JMR&T
- Selective Laser Melting of a Near‐α Ti6242S Alloy for High‐Performance Automotive Parts
- (2020) Christian Fleißner-Rieger et al. ADVANCED ENGINEERING MATERIALS
- Influence of laser power and powder feed rate on the microstructure evolution of laser metal deposited Ti-5553 on forged substrates
- (2020) C. Hicks et al. MATERIALS CHARACTERIZATION
- Improved Commercially Pure Titanium Obtained by Laser Directed Energy Deposition for Dental Prosthetic Applications
- (2020) Óscar Barro et al. Metals
- Towards a process-structure model for Ti-6Al-4V during additive manufacturing
- (2020) Xinyu Yang et al. Journal of Manufacturing Processes
- Uncertainty quantification and composition optimization for alloy additive manufacturing through a CALPHAD-based ICME framework
- (2020) Xin Wang et al. npj Computational Materials
- Microstructure, mechanical behaviour and strengthening mechanisms in Hastelloy X manufactured by electron beam and laser beam powder bed fusion
- (2020) Amal Shaji Karapuzha et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Additive manufacturing of copper-stainless steel hybrid components using laser-aided directed energy deposition
- (2020) Xinchang Zhang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Laser additive manufacturing of FeCrCoMnNi high-entropy alloy: Effect of heat treatment on microstructure, residual stress and mechanical property
- (2019) Zhaopeng Tong et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Advanced Mechanical Strength in Post Heat Treated SLM 2507 at Room and High Temperature Promoted by Hard/Ductile Sigma Precipitates
- (2019) Kamran Saeidi et al. Metals
- Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging
- (2019) Ross Cunningham et al. SCIENCE
- Preparation and mechanical properties of selective laser melted H13 steel
- (2019) Bo Ren et al. JOURNAL OF MATERIALS RESEARCH
- A review on dissimilar metals’ welding methods and mechanisms with interlayer
- (2019) Yongjian Fang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Hydrogen effect on Ti-6.5Al-3.5Mo-1.5Zr-0.3Si parts produced by electron beam melting
- (2019) Ekaterina Stepanova et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Precipitation in 300 grade maraging steel built by selective laser melting: Aging at 510 °C for 2 h
- (2019) Sabrina Bodziak et al. MATERIALS CHARACTERIZATION
- Evolution of microstructure and mechanical properties of selective laser melted Ti-5Al-5V-5Mo-3Cr after heat treatments
- (2019) Holly D. Carlton et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- 3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting
- (2019) Nesma T. Aboulkhair et al. PROGRESS IN MATERIALS SCIENCE
- Process-Structure-Property Relationships of AISI H13 Tool Steel Processed with Selective Laser Melting
- (2019) Morteza Narvan et al. Materials
- Towards a high strength aluminium alloy development methodology for selective laser melting
- (2019) Qingbo Jia et al. MATERIALS & DESIGN
- State of the Art in Directed Energy Deposition: From Additive Manufacturing to Materials Design
- (2019) Adrita Dass et al. Coatings
- Revisiting fundamental welding concepts to improve additive manufacturing: From theory to practice
- (2019) J.P. Oliveira et al. PROGRESS IN MATERIALS SCIENCE
- Selective laser melting enabling the hierarchically heterogeneous microstructure and excellent mechanical properties in an interstitial solute strengthened high entropy alloy
- (2019) Z. G. Zhu et al. Materials Research Letters
- Laser deposition manufacturing of bimetallic structure from TA15 to inconel 718 via copper interlayer
- (2019) Chun Shang et al. MATERIALS LETTERS
- Steels in additive manufacturing: A review of their microstructure and properties
- (2019) P. Bajaj et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of defects on mechanical properties in metal additive manufacturing: A review focusing on X-ray tomography insights
- (2019) Anton du Plessis et al. MATERIALS & DESIGN
- Formation of Austenite in Additively Manufactured and Post-Processed Duplex Stainless Steel Alloys
- (2019) A. D. Iams et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Additive manufacturing of ultrafine-grained high-strength titanium alloys
- (2019) Duyao Zhang et al. NATURE
- Influence of keyhole and conduction mode melting for top-hat shaped beam profiles in laser powder bed fusion
- (2019) Christian Tenbrock et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A Review of Metal Fabricated with Laser- and Powder-Bed Based Additive Manufacturing Techniques: Process, Nomenclature, Materials, Achievable Properties, and its Utilization in the Medical Sector
- (2018) Leonhard Hitzler et al. ADVANCED ENGINEERING MATERIALS
- Laser deposition-additive manufacturing of TiB-Ti composites with novel three-dimensional quasi-continuous network microstructure: Effects on strengthening and toughening
- (2018) Yingbin Hu et al. COMPOSITES PART B-ENGINEERING
- Heat and fluid flow in additive manufacturing—Part I: Modeling of powder bed fusion
- (2018) T. Mukherjee et al. COMPUTATIONAL MATERIALS SCIENCE
- Recent developments and opportunities in additive manufacturing of titanium-based matrix composites: A review
- (2018) Hooyar Attar et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Selective laser melting of an equiatomic CoCrFeMnNi high-entropy alloy: Processability, non-equilibrium microstructure and mechanical property
- (2018) Ruidi Li et al. JOURNAL OF ALLOYS AND COMPOUNDS
- General investigations on processing tool steel X40CrMoV5-1 with selective laser melting
- (2018) Julian Krell et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Additive manufacturing of multi-material structures
- (2018) Amit Bandyopadhyay et al. MATERIALS SCIENCE & ENGINEERING R-REPORTS
- Laser powder bed fusion of Hastelloy X: Effects of hot isostatic pressing and the hot cracking mechanism
- (2018) Quanquan Han et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and Mechanical Properties of CMSX-4 Single Crystals Prepared by Additive Manufacturing
- (2018) C. Körner et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Asymmetric Cracking in Mar-M247 Alloy Builds During Electron Beam Powder Bed Fusion Additive Manufacturing
- (2018) Y. S. Lee et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Additive Manufacturing of Powdery Ni-Based Superalloys Mar-M-247 and CM 247 LC in Hybrid Laser Metal Deposition
- (2018) André Seidel et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Review on thermal analysis in laser-based additive manufacturing
- (2018) Zhaorui Yan et al. OPTICS AND LASER TECHNOLOGY
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- Hierarchical microstructure and strengthening mechanisms of a CoCrFeNiMn high entropy alloy additively manufactured by selective laser melting
- (2018) Z.G. Zhu et al. SCRIPTA MATERIALIA
- Evaluation of topology-optimized lattice structures manufactured via selective laser melting
- (2018) Zefeng Xiao et al. MATERIALS & DESIGN
- Effect of heat treatments on microstructural evolution of additively manufactured and wrought 17-4PH stainless steel
- (2018) Yu Sun et al. MATERIALS & DESIGN
- On the corrosion of additively manufactured aluminium alloy AA2024 prepared by selective laser melting
- (2018) O. Gharbi et al. CORROSION SCIENCE
- Effect of heat input on phase content, crystalline lattice parameter, and residual strain in wire-feed electron beam additive manufactured 304 stainless steel
- (2018) Sergei Yu. Tarasov et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Impact of composition on the heat treatment response of additively manufactured 17–4 PH grade stainless steel
- (2018) S.D. Meredith et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Texture evolution in stainless steel processed by selective laser melting and annealing
- (2018) O. Fergani et al. MATERIALS SCIENCE AND TECHNOLOGY
- Peritectic titanium alloys for 3D printing
- (2018) Pere Barriobero-Vila et al. Nature Communications
- Processing of AISI H11 Tool Steel Powder Modified with Carbon Black Nanoparticles for the Additive Manufacturing of Forging Tools with Tailored Mechanical Properties by Means of Laser Metal Deposition (LMD)
- (2018) Oliver Hentschel et al. Metals
- A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement
- (2018) Bintao Wu et al. Journal of Manufacturing Processes
- Laser beam melting and heat-treatment of 1.2343 (AISI H11) tool steel – microstructure and mechanical properties
- (2018) Florian Huber et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Laser assisted direct energy deposition of Hastelloy-X
- (2018) A.N. Jinoop et al. OPTICS AND LASER TECHNOLOGY
- The Features of Structure Formation in Chromium-Nickel Steel Manufactured by a Wire-Feed Electron Beam Additive Process
- (2018) A. V. Kolubaev et al. Russian Physics Journal
- Causes analysis on cracks in nickel-based single crystal superalloy fabricated by laser powder deposition additive manufacturing
- (2018) Zhipeng Zhou et al. MATERIALS & DESIGN
- Design of high-manganese steels for additive manufacturing applications with energy-absorption functionality
- (2018) Fabian Kies et al. MATERIALS & DESIGN
- Additive manufacturing of Ti6Al4V alloy: A review
- (2018) Shunyu Liu et al. MATERIALS & DESIGN
- Laser solid forming additive manufacturing TiB2 reinforced 2024Al composite: Microstructure and mechanical properties
- (2018) Xiaoli Wen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Solidification behavior and grain morphology of laser additive manufacturing titanium alloys
- (2018) Yan-Yan Zhu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Density and mechanical properties in selective laser melting of Invar 36 and stainless steel 316L
- (2018) Mostafa Yakout et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Low-modulus biomedical Ti–30Nb–5Ta–3Zr additively manufactured by Selective Laser Melting and its biocompatibility
- (2018) J.P. Luo et al. Materials Science & Engineering C-Materials for Biological Applications
- Laser directed energy deposition of water-atomized iron powder: Process optimization and microstructure of single-tracks
- (2018) Mohammad Ansari et al. OPTICS AND LASER TECHNOLOGY
- Optimization of parameters in laser powder deposition AlSi10Mg alloy using Taguchi method
- (2018) Yang Liu et al. OPTICS AND LASER TECHNOLOGY
- Study of the effect of heat treatment on fatigue crack growth behaviour of 316L stainless steel produced by selective laser melting
- (2017) O. Fergani et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Mechanical performance and oxidation resistance of an ODS γ-TiAl alloy processed by spark plasma sintering and laser additive manufacturing
- (2017) C. Kenel et al. INTERMETALLICS
- Numerical and experimental evaluation of a conformally cooled H13 steel injection mould manufactured with selective laser melting
- (2017) Maciej Mazur et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel
- (2017) Aref Yadollahi et al. INTERNATIONAL JOURNAL OF FATIGUE
- Control of Columnar to Equiaxed Transition in Solidification Macrostructure of Austenitic Stainless Steel Castings
- (2017) Simon Naumovich Lekakh et al. ISIJ INTERNATIONAL
- Synchrotron-Based X-ray Microtomography Characterization of the Effect of Processing Variables on Porosity Formation in Laser Power-Bed Additive Manufacturing of Ti-6Al-4V
- (2017) Ross Cunningham et al. JOM
- Experimental investigations of processing the high carbon cold-work tool steel 1.2358 by laser metal deposition for the additive manufacturing of cold forging tools
- (2017) O. Hentschel et al. JOURNAL OF LASER APPLICATIONS
- Microstructures and Microhardness Properties of CMSX-4® Additively Fabricated Through Scanning Laser Epitaxy (SLE)
- (2017) Amrita Basak et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- High-throughput stochastic tensile performance of additively manufactured stainless steel
- (2017) Bradley C. Salzbrenner et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Laser direct deposition of AISI H13 tool steel powder with numerical modeling of solid phase transformation, hardness, and residual stresses
- (2017) Neil S. Bailey et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of scan strategy on density and metallurgical properties of 17-4PH parts printed by Selective Laser Melting (SLM)
- (2017) R. Rashid et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Additive manufacturing of 316L stainless steel by electron beam melting for nuclear fusion applications
- (2017) Yuan Zhong et al. JOURNAL OF NUCLEAR MATERIALS
- Refining effect of electron beam melting on additive manufacturing of pure titanium products
- (2017) Hyung Ki Park et al. MATERIALS LETTERS
- Comparison on mechanical anisotropies of selective laser melted Ti-6Al-4V alloy and 304 stainless steel
- (2017) Hanchen Yu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Mechanical behavior of selective laser melted 316L stainless steel
- (2017) Jyoti Suryawanshi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence mechanism of parameters process and mechanical properties evolution mechanism of maraging steel 300 by selective laser melting
- (2017) Yuchao Bai et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and anisotropic mechanical properties of EBM manufactured Inconel 718 and effects of post heat treatments
- (2017) Dunyong Deng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of heat treatment and hot isostatic pressing on the microstructure and mechanical properties of Inconel 625 alloy processed by laser powder bed fusion
- (2017) Alena Kreitcberg et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructures and Grain Refinement of Additive-Manufactured Ti-xW Alloys
- (2017) Michael Y. Mendoza et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- 3D printing of high-strength aluminium alloys
- (2017) John H. Martin et al. NATURE
- Metallurgy: Printing steels
- (2017) Iain Todd NATURE MATERIALS
- Additively manufactured hierarchical stainless steels with high strength and ductility
- (2017) Y. Morris Wang et al. NATURE MATERIALS
- Experimental investigation on selective laser melting of 17-4PH stainless steel
- (2017) Zhiheng Hu et al. OPTICS AND LASER TECHNOLOGY
- Processability of pure Zn and pure Fe by SLM for biodegradable metallic implant manufacturing
- (2017) Marco Montani et al. RAPID PROTOTYPING JOURNAL
- Mechanical properties and microstructural characterization of selective laser melted 17-4 PH stainless steel
- (2017) Mohamad Mahmoudi et al. RAPID PROTOTYPING JOURNAL
- Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys
- (2017) Stéphane Gorsse et al. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS
- Effect of Zirconium addition on crack, microstructure and mechanical behavior of selective laser melted Al-Cu-Mg alloy
- (2017) Hu Zhang et al. SCRIPTA MATERIALIA
- Crystallographic texture control of beta-type Ti–15Mo–5Zr–3Al alloy by selective laser melting for the development of novel implants with a biocompatible low Young's modulus
- (2017) Takuya Ishimoto et al. SCRIPTA MATERIALIA
- The formation mechanism of TiC reinforcement and improved tensile strength in additive manufactured Ti matrix nanocomposite
- (2017) Beibei He et al. VACUUM
- Analyzing the effects of powder and post-processing on porosity and properties of electron beam melted Ti-6Al-4V
- (2017) Ross Cunningham et al. Materials Research Letters
- Heterogeneous materials: a new class of materials with unprecedented mechanical properties
- (2017) Xiaolei Wu et al. Materials Research Letters
- Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties
- (2017) Florian Hengsbach et al. MATERIALS & DESIGN
- Microstructural evolution, nanoprecipitation behavior and mechanical properties of selective laser melted high-performance grade 300 maraging steel
- (2017) Chaolin Tan et al. MATERIALS & DESIGN
- On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting
- (2017) Umberto Scipioni Bertoli et al. MATERIALS & DESIGN
- Microstructure, defects and mechanical behavior of beta-type titanium porous structures manufactured by electron beam melting and selective laser melting
- (2016) Y.J. Liu et al. ACTA MATERIALIA
- Metallurgy of high-silicon steel parts produced using Selective Laser Melting
- (2016) Michele Garibaldi et al. ACTA MATERIALIA
- Denudation of metal powder layers in laser powder bed fusion processes
- (2016) Manyalibo J. Matthews et al. ACTA MATERIALIA
- Normalised model-based processing diagrams for additive layer manufacture of engineering alloys
- (2016) Meurig Thomas et al. ACTA MATERIALIA
- Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing
- (2016) Zhuqing Wang et al. ACTA MATERIALIA
- Functionally graded material of 304L stainless steel and inconel 625 fabricated by directed energy deposition: Characterization and thermodynamic modeling
- (2016) Beth E. Carroll et al. ACTA MATERIALIA
- Metal Additive Manufacturing: A Review of Mechanical Properties
- (2016) John J. Lewandowski et al. Annual Review of Materials Research
- Microstructure and mechanical properties of as-processed scandium-modified aluminium using selective laser melting
- (2016) Adriaan B. Spierings et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Analytical modelling of residual stress in additive manufacturing
- (2016) O Fergani et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- A study on the residual stress during selective laser melting (SLM) of metallic powder
- (2016) Yang Liu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Investigation on direct laser powder deposition of 18 Ni (300) marage steel using mathematical model and experimental characterisation
- (2016) Sabina Luisa Campanelli et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Additive manufacturing of metallic components by selective electron beam melting — a review
- (2016) C. Körner INTERNATIONAL MATERIALS REVIEWS
- The metallurgy and processing science of metal additive manufacturing
- (2016) W. J. Sames et al. INTERNATIONAL MATERIALS REVIEWS
- Precipitation Reactions in Age-Hardenable Alloys During Laser Additive Manufacturing
- (2016) Eric A. Jägle et al. JOM
- Improved mechanical properties of the new Ti-15Ta- x Zr alloys fabricated by selective laser melting for biomedical application
- (2016) Lamei Yan et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Selective laser melting of titanium alloy with 50 wt% tantalum: Microstructure and mechanical properties
- (2016) Swee Leong Sing et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Interlaboratory Study for Nickel Alloy 625 Made by Laser Powder Bed Fusion to Quantify Mechanical Property Variability
- (2016) Christopher U. Brown et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Electron Beam Melted Beta-type Ti–24Nb–4Zr–8Sn Porous Structures With High Strength-to-Modulus Ratio
- (2016) Yujing Liu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Intragranular cellular segregation network structure strengthening 316L stainless steel prepared by selective laser melting
- (2016) Yuan Zhong et al. JOURNAL OF NUCLEAR MATERIALS
- Microstructure of selective laser melted CM247LC nickel-based superalloy and its evolution through heat treatment
- (2016) V.D. Divya et al. MATERIALS CHARACTERIZATION
- Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using X-ray computed tomography
- (2016) I. Maskery et al. MATERIALS CHARACTERIZATION
- Corrigendum to “Novel ferritic stainless steel formed by laser melting from duplex stainless steel powder with advanced mechanical properties and high ductility” [Mater. Sci. Eng. A 665 (2016) 59–65]
- (2016) K. Saeidi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Novel ferritic stainless steel formed by laser melting from duplex stainless steel powder with advanced mechanical properties and high ductility
- (2016) K. Saeidi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Selective laser melting of high strength Al–Cu–Mg alloys: Processing, microstructure and mechanical properties
- (2016) Hu Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Spatially dependent properties in a laser additive manufactured Ti–6Al–4V component
- (2016) S. Palanivel et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Wire + Arc Additive Manufacturing
- (2016) S. W. Williams et al. MATERIALS SCIENCE AND TECHNOLOGY
- Additive manufacturing of Ni-based superalloys: The outstanding issues
- (2016) Moataz M. Attallah et al. MRS BULLETIN
- The achievable mechanical properties of SLM produced Maraging Steel 300 components
- (2016) Thorsten Hermann Becker et al. RAPID PROTOTYPING JOURNAL
- SLM additive manufacture of H13 tool steel with conformal cooling and structural lattices
- (2016) Maciej Mazur et al. RAPID PROTOTYPING JOURNAL
- Comparison of Maraging Steel Micro- and Nanostructure Produced Conventionally and by Laser Additive Manufacturing
- (2016) Eric Jägle et al. Materials
- Microstructure and mechanical properties of the near-beta titanium alloy Ti-5553 processed by selective laser melting
- (2016) H. Schwab et al. MATERIALS & DESIGN
- Selective laser melting of stainless steel 316L with low porosity and high build rates
- (2016) Zhongji Sun et al. MATERIALS & DESIGN
- Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
- (2016) Sarah K. Everton et al. MATERIALS & DESIGN
- A criterion for cracking during solidification
- (2015) Sindo Kou ACTA MATERIALIA
- Controlling the microstructure and properties of wire arc additive manufactured Ti–6Al–4V with trace boron additions
- (2015) M.J. Bermingham et al. ACTA MATERIALIA
- Anisotropic tensile behavior of Ti–6Al–4V components fabricated with directed energy deposition additive manufacturing
- (2015) Beth E. Carroll et al. ACTA MATERIALIA
- Reduction of micro-cracking in nickel superalloys processed by Selective Laser Melting: A fundamental alloy design approach
- (2015) Neil J. Harrison et al. ACTA MATERIALIA
- Solution Heat Treatment of the Single Crystal Nickel-Base Superalloy CMSX-4 Fabricated by Selective Electron Beam Melting
- (2015) Markus Ramsperger et al. ADVANCED ENGINEERING MATERIALS
- Metrology Needs for Metal Additive Manufacturing Powders
- (2015) John A. Slotwinski et al. JOM
- Grain morphology evolution behavior of titanium alloy components during laser melting deposition additive manufacturing
- (2015) T. Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg
- (2015) Christian Weingarten et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Selective laser melting for manufacturing of thin-walled porous elements
- (2015) Eberhard Abele et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Laser and electron-beam powder-bed additive manufacturing of metallic implants: A review on processes, materials and designs
- (2015) Swee Leong Sing et al. JOURNAL OF ORTHOPAEDIC RESEARCH
- Microstructural Characterization and Mechanical Performance of Hot Work Tool Steel Processed by Selective Laser Melting
- (2015) Martin Joachim Holzweissig et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Study on the microstructure, mechanical property and residual stress of SLM Inconel-718 alloy manufactured by differing island scanning strategy
- (2015) Yanjin Lu et al. OPTICS AND LASER TECHNOLOGY
- Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges
- (2015) W. E. King et al. Applied Physics Reviews
- Review of selective laser melting: Materials and applications
- (2015) C. Y. Yap et al. Applied Physics Reviews
- Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting
- (2014) J. A. Cherry et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- In situ quality control of the selective laser melting process using a high-speed, real-time melt pool monitoring system
- (2014) S. Clijsters et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- ICME for Crashworthiness of TWIP Steels: From Ab Initio to the Crash Performance
- (2014) O. Güvenç et al. JOM
- Microstructure evolution and layer bands of laser melting deposition Ti–6.5Al–3.5Mo–1.5Zr–0.3Si titanium alloy
- (2014) Yanyan Zhu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy
- (2014) Luke N. Carter et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Heat transfer and material flow during laser assisted multi-layer additive manufacturing
- (2014) V. Manvatkar et al. JOURNAL OF APPLIED PHYSICS
- Selective Laser Melting of Crack-Free High Density M2 High Speed Steel Parts by Baseplate Preheating
- (2014) Karolien Kempen et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Metal Additive Manufacturing: A Review
- (2014) William E. Frazier JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
- (2014) Wayne E. King et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Laser metal deposition and selective laser melting of Fe–28 at.% Al
- (2014) Gesa Rolink et al. JOURNAL OF MATERIALS RESEARCH
- Thermal effects on microstructural heterogeneity of Inconel 718 materials fabricated by electron beam melting
- (2014) William J. Sames et al. JOURNAL OF MATERIALS RESEARCH
- On the fatigue properties of metals manufactured by selective laser melting – The role of ductility
- (2014) Stefan Leuders et al. JOURNAL OF MATERIALS RESEARCH
- Precipitation and austenite reversion behavior of a maraging steel produced by selective laser melting
- (2014) Eric A. Jägle et al. JOURNAL OF MATERIALS RESEARCH
- Site specific control of crystallographic grain orientation through electron beam additive manufacturing
- (2014) R. R. Dehoff et al. MATERIALS SCIENCE AND TECHNOLOGY
- Spatial variation of melt pool geometry, peak temperature and solidification parameters during laser assisted additive manufacturing process
- (2014) V. Manvatkar et al. MATERIALS SCIENCE AND TECHNOLOGY
- An Experimental Investigation into Additive Manufacturing-Induced Residual Stresses in 316L Stainless Steel
- (2014) Amanda S. Wu et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Mechanical Properties of Austenitic Stainless Steel Made by Additive Manufacturing
- (2014) William E. Luecke et al. JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY
- Characterization of Metal Powders Used for Additive Manufacturing
- (2014) J. A. Slotwinski et al. JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY
- Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control
- (2014) John A. Slotwinski et al. JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY
- A novel method for manufacturing sintered aluminium heat pipes (SAHP)
- (2013) M. Ameli et al. APPLIED THERMAL ENGINEERING
- Microstructure and properties of intermetallic composite coatings fabricated by selective laser melting of Ti–SiC powder mixtures
- (2013) P. Krakhmalev et al. INTERMETALLICS
- A comparison of the tensile, fatigue, and fracture behavior of Ti–6Al–4V and 15-5 PH stainless steel parts made by selective laser melting
- (2013) H. Khalid Rafi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- New approach for assessing the weldability of precipitation-strengthened nickel-base superalloys
- (2013) Homam Naffakh Moosavy et al. International Journal of Minerals Metallurgy and Materials
- Initiation and growth mechanisms for weld solidification cracking
- (2013) N. Coniglio et al. INTERNATIONAL MATERIALS REVIEWS
- Microstructures and Hardness Properties for β-Phase Ti–24Nb–4Zr–7.9Sn Alloy Fabricated by Electron Beam Melting
- (2013) J. Hernandez et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Effects of processing parameters on tensile properties of selective laser melted 304 stainless steel
- (2013) Kai Guan et al. MATERIALS & DESIGN
- Characterization of microstructure and mechanical properties of laser melting deposited Ti–6.5Al–3.5Mo–1.5Zr–0.3Si titanium alloy
- (2013) Yanyan Zhu et al. MATERIALS & DESIGN
- Microstructural, mechanical and weldability assessments of the dissimilar welds between γ′- and γ″-strengthened nickel-base superalloys
- (2013) Homam Naffakh Moosavy et al. MATERIALS CHARACTERIZATION
- Steel showing twinning-induced plasticity processed by selective laser melting — An additively manufactured high performance material
- (2013) T. Niendorf et al. MATERIALS CHARACTERIZATION
- Crystal structure analysis of M2 high speed steel parts produced by selective laser melting
- (2013) Z.H. Liu et al. MATERIALS CHARACTERIZATION
- Characterization of grade 2 commercially pure Trabecular Titanium structures
- (2013) E. Marin et al. Materials Science & Engineering C-Materials for Biological Applications
- Microstructure and tensile properties of laser melting deposited Ti–5Al–5Mo–5V–1Cr–1Fe near β titanium alloy
- (2013) C.M. Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The study of the laser parameters and environment variables effect on mechanical properties of high compact parts elaborated by selective laser melting 316L powder
- (2013) Baicheng Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Manufacture by selective laser melting and mechanical behavior of commercially pure titanium
- (2013) H. Attar et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of Al–12Si produced by selective laser melting: Effect of heat treatment
- (2013) K.G. Prashanth et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and tensile properties of iron parts fabricated by selective laser melting
- (2013) Bo Song et al. OPTICS AND LASER TECHNOLOGY
- Fatigue performance of additive manufactured metallic parts
- (2013) A.B. Spierings et al. RAPID PROTOTYPING JOURNAL
- Microstructure and mechanical behavior of commercial purity Ti/Ti–6Al–2Zr–1Mo–1V structurally graded material fabricated by laser additive manufacturing
- (2013) Yao-Jian Liang et al. SCRIPTA MATERIALIA
- Low cycle fatigue behavior of laser melting deposited TC18 titanium alloy
- (2013) Zhen LI et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Microstructures and properties of solid and reticulated mesh components of pure iron fabricated by electron beam melting
- (2013) Lawrence E. Murr et al. Journal of Materials Research and Technology-JMR&T
- Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium
- (2012) Dongdong Gu et al. ACTA MATERIALIA
- Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
- (2012) Lore Thijs et al. ACTA MATERIALIA
- Laser additive manufacturing of metallic components: materials, processes and mechanisms
- (2012) D D Gu et al. INTERNATIONAL MATERIALS REVIEWS
- Laser metal deposition of Inconel 625: Microstructure and mechanical properties
- (2012) Marleen Rombouts et al. JOURNAL OF LASER APPLICATIONS
- On selective laser melting of ultra high carbon steel: Effect of scan speed and post heat treatment
- (2012) M. A. Taha et al. MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK
- Microstructural Characterization of Laser-Deposited Al 4047 Alloy
- (2012) G. P. Dinda et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Density and porosity control of sintered 316L stainless steel parts produced by additive manufacturing
- (2012) B Verlee et al. POWDER METALLURGY
- Assessing and comparing influencing factors of residual stresses in selective laser melting using a novel analysis method
- (2012) Jean-Pierre Kruth et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Property evaluation of 304L stainless steel fabricated by selective laser melting
- (2012) K. Abd‐Elghany et al. RAPID PROTOTYPING JOURNAL
- Selective laser melting of TiC/Ti bulk nanocomposites: Influence of nanoscale reinforcement
- (2012) Dongdong Gu et al. SCRIPTA MATERIALIA
- Fabrication and microstructure characterization of selective laser‐melted FeAl intermetallic parts
- (2012) Bo Song et al. SURFACE & COATINGS TECHNOLOGY
- Novel precipitate–microstructural architecture developed in the fabrication of solid copper components by additive manufacturing using electron beam melting
- (2011) D.A. Ramirez et al. ACTA MATERIALIA
- Mechanical property study on rapid additive layer manufacture Hastelloy® X alloy by selective laser melting technology
- (2011) Fude Wang INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The microstructure and mechanical properties of deposited-IN718 by selective laser melting
- (2011) Zemin Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A simple methodology for predicting laser-weld properties from material and laser parameters
- (2011) D B Hann et al. JOURNAL OF PHYSICS D-APPLIED PHYSICS
- Laser processed TiN reinforced Ti6Al4V composite coatings
- (2011) Vamsi Krishna Balla et al. Journal of the Mechanical Behavior of Biomedical Materials
- Methods of measuring residual stresses in components
- (2011) N.S. Rossini et al. MATERIALS & DESIGN
- Microstructural Architecture, Microstructures, and Mechanical Properties for a Nickel-Base Superalloy Fabricated by Electron Beam Melting
- (2011) L. E. Murr et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- The investigation of the influence of laser re‐melting on density, surface quality and microstructure of selective laser melting parts
- (2011) Evren Yasa et al. RAPID PROTOTYPING JOURNAL
- Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts
- (2011) A.B. Spierings et al. RAPID PROTOTYPING JOURNAL
- Manufacture by selective laser melting and mechanical behavior of a biomedical Ti–24Nb–4Zr–8Sn alloy
- (2011) L.C. Zhang et al. SCRIPTA MATERIALIA
- Evolution of microstructure in laser deposited Al–11.28%Si alloy
- (2011) G.P. Dinda et al. SURFACE & COATINGS TECHNOLOGY
- Study of mechanical properties of AISI 316 stainless steel processed by “selective laser melting”, following different manufacturing strategies
- (2010) Itziar Tolosa et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Characterization of (TiB+TiC)/TC4 in situ titanium matrix composites prepared by laser direct deposition
- (2010) Yongzhong Zhang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Selective laser melting of aluminium components
- (2010) Eleftherios Louvis et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Residual stresses in laser direct metal deposited Waspaloy
- (2010) R.J. Moat et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- On direct laser deposited Hastelloy X: dimension, surface finish, microstructure and mechanical properties
- (2010) F. Wang et al. MATERIALS SCIENCE AND TECHNOLOGY
- Model of Radiation and Heat Transfer in Laser-Powder Interaction Zone at Selective Laser Melting
- (2009) A. V. Gusarov et al. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
- Selective Laser Melting of thin wall parts using pulse shaping
- (2009) K.A. Mumtaz et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- First-Principles Calculations and CALPHAD Modeling of Thermodynamics
- (2009) Zi-Kui Liu JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION
- Temperature and composition profile during double-track laser cladding of H13 tool steel
- (2009) X He et al. JOURNAL OF PHYSICS D-APPLIED PHYSICS
- Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM)
- (2009) Jayanthi Parthasarathy et al. Journal of the Mechanical Behavior of Biomedical Materials
- Additive manufacturing of Ti–6Al–4V components by shaped metal deposition: Microstructure and mechanical properties
- (2009) Bernd Baufeld et al. MATERIALS & DESIGN
- Microstructure and Mechanical Characteristics of DMLS Tool-Inserts
- (2009) B. Sustarsic et al. MATERIALS AND MANUFACTURING PROCESSES
- Thermal fatigue behavior of an iron-based laser sintered material
- (2009) Y. Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Laser aided direct metal deposition of Inconel 625 superalloy: Microstructural evolution and thermal stability
- (2009) G.P. Dinda et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of nickel based superalloy IN718 produced by rapid prototyping with electron beam melting (EBM)
- (2009) A Strondl et al. MATERIALS SCIENCE AND TECHNOLOGY
- Studies of Standard Heat Treatment Effects on Microstructure and Mechanical Properties of Laser Net Shape Manufactured INCONEL 718
- (2009) H. Qi et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructure and mechanical properties of Ti‐6Al‐4V produced by electron beam melting of pre‐alloyed powders
- (2009) Luca Facchini et al. RAPID PROTOTYPING JOURNAL
- Top surface and side roughness of Inconel 625 parts processed using selective laser melting
- (2009) Kamran Mumtaz et al. RAPID PROTOTYPING JOURNAL
- Characterization of laser powder deposited Ti–TiC composites and functional gradient materials
- (2008) Yongzhong Zhang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Preliminary investigation on distribution of residual stress generated by the selective laser melting process
- (2008) C Casavola et al. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
- Microstructures and mechanical properties of electron beam-rapid manufactured Ti–6Al–4V biomedical prototypes compared to wrought Ti–6Al–4V
- (2008) L.E. Murr et al. MATERIALS CHARACTERIZATION
- Experimental studies on selective laser melting of metallic parts
- (2008) H. Meier et al. MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK
- Effects of the cladding parameters on the deposition efficiency in pulsed Nd:YAG laser cladding
- (2007) Hyoung-Keun Lee JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- High density selective laser melting of Waspaloy®
- (2007) Kamran Aamir Mumtaz et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started