Development of artificial one-part geopolymer lightweight aggregates by crushing technique

Effect of mixing method on the performance of alkali-activated fly ash/slag pastes along with polycarboxylate admixture

(2021) Yazan Alrefaei et al.   CEMENT & CONCRETE COMPOSITES

Recent advances in molecular dynamics simulation of the N-A-S-H geopolymer system: modeling, structural analysis, and dynamics

(2021) Ling-Yu Xu et al.   CONSTRUCTION AND BUILDING MATERIALS

Engineered/strain-hardening cementitious composites (ECC/SHCC) with an ultra-high compressive strength over 210 MPa

(2021) Bo-Tao Huang et al.   COMPOSITES COMMUNICATIONS

Shear behavior of captive- and short- column effects using different basalt aggregate contents

(2020) Norhan Shahrour et al.   Journal of Building Engineering

High-strength seawater sea-sand Engineered Cementitious Composites (SS-ECC): Mechanical performance and probabilistic modeling

(2020) Bo-Tao Huang et al.   CEMENT & CONCRETE COMPOSITES

Reinforcement corrosion in limestone flash calcined clay cement-based concrete

(2020) Quang Dieu Nguyen et al.   CEMENT AND CONCRETE RESEARCH

Effect of old mortar pore structure on relative humidity response of recycled aggregate concrete

(2020) Chao Liu et al.   CONSTRUCTION AND BUILDING MATERIALS

Experimental study on full-volume fly ash geopolymer mortars: Sintered fly ash versus sand as fine aggregates

(2020) Lan-Ping Qian et al.   JOURNAL OF CLEANER PRODUCTION

Seawater sea-sand Engineered Cementitious Composites (SS-ECC) for marine and coastal applications

(2020) Bo-Tao Huang et al.   COMPOSITES COMMUNICATIONS

Effect of fiber content on mechanical performance and cracking characteristics of ultra-high-performance seawater sea-sand concrete (UHP-SSC)

(2020) Bo-Tao Huang et al.   ADVANCES IN STRUCTURAL ENGINEERING

Use of Coal Bottom Ash and CaO-CaCl2-Activated GGBFS Binder in the Manufacturing of Artificial Fine Aggregates through Cold-Bonded Pelletization

(2020) Dongho Jeon et al.   Materials

Seawater sea-sand engineered/strain-hardening cementitious composites (ECC/SHCC): Assessment and modeling of crack characteristics

(2020) Bo-Tao Huang et al.   CEMENT AND CONCRETE RESEARCH

The Influence of Heat and Mechanical Treatment of Concrete Rubble on the Properties of Recycled Aggregate Concrete

(2019) Edyta Pawluczuk et al.   Materials

The effectiveness of different superplasticizers in ambient cured one-part alkali activated pastes

(2019) Yazan Alrefaei et al.   CEMENT & CONCRETE COMPOSITES

Silico-Aluminophosphate and Alkali-Aluminosilicate Geopolymers: A Comparative Review

(2019) Yan-Shuai Wang et al.   Frontiers in Materials

Life cycle assessment of autoclaved aerated fly ash and concrete block production: a case study in China

(2019) Yifei Shi et al.   ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH

Development of Strain-Induced Stresses in Early Age Concrete Composed of Recycled Gravel or Sand

(2019) Brice Delsaute et al.   Journal of Advanced Concrete Technology

Nanoscale Ordering and Depolymerization of Calcium Silicate Hydrates in the Presence of Alkalis

(2019) Nishant Garg et al.   Journal of Physical Chemistry C

Fresh and Hardened Properties of Fly Ash–Slag Blended Geopolymer Paste and Mortar

(2019) Subhashree Samantasinghar et al.   International Journal of Concrete Structures and Materials

The production and properties of cold-bonded aggregate and its applications in concrete: A review

(2019) Feras Tajra et al.   CONSTRUCTION AND BUILDING MATERIALS

Influence of coal fly ash on the early performance enhancement and formation mechanisms of silico-aluminophosphate geopolymer

(2019) Yan-Shuai Wang et al.   CEMENT AND CONCRETE RESEARCH

Waste ceramic powder-based geopolymer mortars: Effect of curing temperature and alkaline solution-to-binder ratio

(2019) Parham Shoaei et al.   CONSTRUCTION AND BUILDING MATERIALS

Strength and Microstructure of Class-C Fly Ash and GGBS Blend Geopolymer Activated in NaOH & NaOH + Na2SiO3

(2019) Sasui Sasui et al.   Materials

Effect of synthesis parameters on compressive strength of fly ash-slag blended geopolymer

(2018) Subhashree Samantasinghar et al.   CONSTRUCTION AND BUILDING MATERIALS

Impact of use of steel slag as coarse aggregate and wastewater on fresh and hardened properties of concrete

(2018) Shekhar Saxena et al.   CONSTRUCTION AND BUILDING MATERIALS

Enhancing mechanical and durability properties of recycled aggregate concrete

(2018) George Dimitriou et al.   CONSTRUCTION AND BUILDING MATERIALS

Tensile behavior and microstructure of hybrid fiber ambient cured one-part engineered geopolymer composites

(2018) Yazan Alrefaei et al.   CONSTRUCTION AND BUILDING MATERIALS

Determination of optimized geopolymerization factors on the properties of pelletized fly ash aggregates

(2018) K.N. Shivaprasad et al.   CONSTRUCTION AND BUILDING MATERIALS

Construction and demolition waste generation and properties of recycled aggregate concrete: A global perspective

(2018) Ali Akhtar et al.   JOURNAL OF CLEANER PRODUCTION

Phase characterizations, physical properties and strength of environment-friendly cold-bonded fly ash lightweight aggregates

(2018) Chalermphan Narattha et al.   JOURNAL OF CLEANER PRODUCTION

Preparation of cleaner one-part geopolymer by investigating different types of commercial sodium metasilicate in China

(2018) Cong Ma et al.   JOURNAL OF CLEANER PRODUCTION

Alternation of traditional cement mortars using fly ash-based geopolymer mortars modified by slag

(2018) Jun Shang et al.   JOURNAL OF CLEANER PRODUCTION

Effect of sodium carbonate/sodium silicate activator on the rheology, geopolymerization and strength of fly ash/slag geopolymer pastes

(2018) Ishwarya G et al.   CEMENT & CONCRETE COMPOSITES

Lightweight aggregates produced by granulation of peat-wood fly ash with alkali activator

(2016) Juho Yliniemi et al.   INTERNATIONAL JOURNAL OF MINERAL PROCESSING

High performance of treated and washed MSWI bottom ash granulates as natural aggregate replacement within earth-moist concrete

(2016) A. Keulen et al.   WASTE MANAGEMENT

Use of OPC to improve setting and early strength properties of low calcium fly ash geopolymer concrete cured at room temperature

(2015) Pradip Nath et al.   CEMENT & CONCRETE COMPOSITES

Effects of sodium hydroxide and sodium silicate solutions on compressive and shear bond strengths of FA–GBFS geopolymer

(2015) Tanakorn Phoo-ngernkham et al.   CONSTRUCTION AND BUILDING MATERIALS

Accelerated curing effects on the mechanical performance of cold bonded and sintered fly ash aggregate concrete

(2015) P. Gomathi et al.   CONSTRUCTION AND BUILDING MATERIALS

High calcium fly ash geopolymer mortar containing Portland cement for use as repair material

(2015) Tanakorn Phoo-ngernkham et al.   CONSTRUCTION AND BUILDING MATERIALS

Recycling of MSWI fly ash by means of cementitious double step cold bonding pelletization: Technological assessment for the production of lightweight artificial aggregates

(2015) Francesco Colangelo et al.   JOURNAL OF HAZARDOUS MATERIALS

Creep and drying shrinkage of a blended slag and low calcium fly ash geopolymer Concrete

(2015) A. Castel et al.   MATERIALS AND STRUCTURES

Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition

(2014) Pradip Nath et al.   CONSTRUCTION AND BUILDING MATERIALS

Variation in hybrid cements over time. Alkaline activation of fly ash–portland cement blends

(2013) I. García-Lodeiro et al.   CEMENT AND CONCRETE RESEARCH

Properties of high calcium fly ash geopolymer pastes with Portland cement as an additive

(2013) Tanakorn Phoo-ngernkham et al.   International Journal of Minerals Metallurgy and Materials

Influence of curing conditions on properties of high calcium fly ash geopolymer containing Portland cement as additive

(2013) Saengsuree Pangdaeng et al.   MATERIALS & DESIGN

Manufacture and performance of cold bonded lightweight aggregate using alkaline activators for high performance concrete

(2012) Le Anh-tuan Bui et al.   CONSTRUCTION AND BUILDING MATERIALS

Durability of lightweight concretes with lightweight fly ash aggregates

(2010) Niyazi Ugur Kockal et al.   CONSTRUCTION AND BUILDING MATERIALS

Manufacture of artificial aggregate using MSWI bottom ash

(2010) R. Cioffi et al.   WASTE MANAGEMENT

The effect of sodium silicate and sodium hydroxide on the strength of aggregates made from coal fly ash using the geopolymerisation method

(2010) Hamzah Fansuri et al.   Asia-Pacific Journal of Chemical Engineering

Water absorption in internally cured mortar made with water-filled lightweight aggregate

(2009) Ryan Henkensiefken et al.   CEMENT AND CONCRETE RESEARCH

Workability and strength behaviour of concrete with cold-bonded fly ash aggregate

(2008) Glory Joseph et al.   MATERIALS AND STRUCTURES