Better electrochemical performance of PEMFC under a novel pneumatic clamping mechanism

Determination of time constants of diffusion and electrochemical processes in Polymer Electrolyte Membrane Fuel Cells

(2021) Alfredo Iranzo et al.   ENERGY

Numerical Analysis of Air-cooled Proton Exchange Membrane Fuel Cells With Various Cathode Flow Channels

(2020) Diankai Qiu et al.   ENERGY

Investigation of contact pressure distribution on gas diffusion layer of fuel cell with pneumatic endplate

(2020) M.M. Barzegari et al.   APPLIED ENERGY

Investigation of intrusion effects of a gas diffusion layer into channel cross sections depending on channel parameters of metallic bipolar plates

(2020) Nico Keller et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

An experimental study on pressure distribution and performance of end-plate with different optimization parameters for air-cooled open-cathode LT-PEMFC

(2020) Chen Zhao et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Bending-durable membrane-electrode assembly using metal nanowires for bendable polymer electrolyte membrane fuel cell

(2019) Yun Sik Kang et al.   ENERGY

Performance assessment of a combined system consisting of a high-temperature polymer electrolyte membrane fuel cell and a thermoelectric generator

(2019) Xinru Guo et al.   ENERGY

Impact of clamping pressure and stress relaxation on the performance of different polymer electrolyte membrane water electrolysis cell designs

(2019) Elena Borgardt et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Effect of clamping pressure on liquid-cooled PEMFC stack performance considering inhomogeneous gas diffusion layer compression

(2019) Xiaohui Yan et al.   APPLIED ENERGY

Effects of Mg2+ contamination on the performance of proton exchange membrane fuel cell

(2019) Jingyu Zhu et al.   ENERGY

Prognostics of PEM fuel cells based on Gaussian process state space models

(2018) Li Zhu et al.   ENERGY

3D numerical investigation of clamping pressure effect on the performance of proton exchange membrane fuel cell with interdigitated flow field

(2018) M. Movahedi et al.   ENERGY

Effects of assembly torque on a proton exchange membrane fuel cell with stamped metallic bipolar plates

(2018) Chen-Yu Chen et al.   ENERGY

Stresses and their impacts on proton exchange membrane fuel cells: A review

(2018) Ahmed Mohmed Dafalla et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Development of contact pressure distribution of PEM fuel cell's MEA using novel clamping mechanism

(2017) E. Alizadeh et al.   ENERGY

Investigation of the internal behavior in segmented PEMFCs of different flow fields during cold start process

(2017) R. Lin et al.   ENERGY

Corrosion and interfacial contact resistance behavior of electrochemically nitrided 316L SS bipolar plates for proton exchange membrane fuel cells

(2017) S. Pugal Mani et al.   ENERGY

Durability investigation and performance study of hydrothermal synthesized platinum-multi walled carbon nanotube nanocomposite catalyst for proton exchange membrane fuel cell

(2017) Farokh Mirzaei et al.   ENERGY

Heat integration of methanol steam reformer with a high-temperature polymeric electrolyte membrane fuel cell

(2017) P. Ribeirinha et al.   ENERGY

Analysis of the clamping effects on the passive direct methanol fuel cell performance using electrochemical impedance spectroscopy

(2016) Ranjan K. Mallick et al.   ELECTROCHIMICA ACTA

Comparison of corrosion behavior between coarse grained and nanocrystalline Ni Fe alloys in chloride solutions and proton exchange membrane fuel cell environment by EIS, XPS and Raman spectra techniques

(2016) Lv Jinlong et al.   ENERGY

Analytical calculation and evaluation of water transport through a proton exchange membrane fuel cell based on a one-dimensional model

(2016) Junming Hu et al.   ENERGY

Experimental study of variable operating parameters effects on overall PEMFC performance and spatial performance distribution

(2016) Qian Zhang et al.   ENERGY

Comparison of the performance and EIS (electrochemical impedance spectroscopy) response of an activated PEMFC (proton exchange membrane fuel cell) under low and high thermal and pressure stresses

(2016) Mohammad Zhiani et al.   ENERGY

Effects of bolt pre-loading variations on performance of GDL in a bolted PEMFC by 3-D FEM analysis

(2016) Chi-Hui Chien et al.   ENERGY

Study of hydrogen crossover and proton conductivity of self-humidifying nanocomposite proton exchange membrane based on sulfonated poly (ether ether ketone)

(2016) Parvin Sayadi et al.   ENERGY

Effect of prominent gas diffusion layer (GDL) on non-isothermal transport characteristics and cell performance of a proton exchange membrane fuel cell (PEMFC)

(2015) Shiang-Wuu Perng et al.   ENERGY

A method based on impedance spectroscopy for predicting the behavior of novel ionic liquid-polymer inclusion membranes in microbial fuel cells

(2015) M.J. Salar-García et al.   ENERGY

A two-phase flow and non-isothermal agglomerate model for a proton exchange membrane (PEM) fuel cell

(2014) Lei Xing et al.   ENERGY

Numerical modeling and simulation of PEM fuel cells: Progress and perspective

(2013) Guang-Hua Song et al.   ACTA MECHANICA SINICA

Optimization of parameters for hot-pressing manufacture of membrane electrode assembly for PEM (polymer electrolyte membrane fuel cells) fuel cell

(2013) Osman Okur et al.   ENERGY

Experimental Investigation of Irreversibility of a Proton Exchange Membrane Fuel Cell

(2012) I. Khazaee   JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME

A numerical investigation of the effects of GDL compression and intrusion in polymer electrolyte fuel cells (PEFCs)

(2011) Purushothama Chippar et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Effect of gas-diffusion electrode material heterogeneity on the structural integrity of polymer electrolyte fuel cell

(2010) K.K. Poornesh et al.   ENERGY

The parametric optimum analysis of a proton exchange membrane (PEM) fuel cell and its load matching

(2010) Xiuqin Zhang et al.   ENERGY

Composite endplates with pre-curvature for PEMFC (polymer electrolyte membrane fuel cell)

(2009) Ha Na Yu et al.   COMPOSITE STRUCTURES

Experimental study on clamping pressure distribution in PEM fuel cells

(2008) Xinting Wang et al.   JOURNAL OF POWER SOURCES