Reinforcement method for 3D concrete printing using paste-coated bar penetrations
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Reinforcement method for 3D concrete printing using paste-coated bar penetrations
Authors
Keywords
Reinforcement, 3D concrete printing, Bar penetration, Additive manufacturing
Journal
AUTOMATION IN CONSTRUCTION
Volume 127, Issue -, Pages 103694
Publisher
Elsevier BV
Online
2021-04-14
DOI
10.1016/j.autcon.2021.103694
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Interlayer bonding improvement of 3D printed concrete with polymer modified mortar: experiments and molecular dynamics studies
- (2020) Li Wang et al. CEMENT & CONCRETE COMPOSITES
- The Effect of Accelerator Dosage on Fresh Concrete Properties and on Interlayer Strength in Shotcrete 3D Printing
- (2020) Inka Dressler et al. Materials
- 3D printing of a post-tensioned concrete girder designed by topology optimization
- (2020) Gieljan Vantyghem et al. AUTOMATION IN CONSTRUCTION
- Possibilities and challenges of constant shear rate test for evaluation of structural build-up rate of cementitious materials
- (2020) I. Ivanova et al. CEMENT AND CONCRETE RESEARCH
- A novel additive mortar leveraging internal curing for enhancing interlayer bonding of cementitious composite for 3D printing
- (2020) Guowei Ma et al. CONSTRUCTION AND BUILDING MATERIALS
- Yield stress criteria to assess the buildability of 3D concrete printing
- (2020) R. Jayathilakage et al. CONSTRUCTION AND BUILDING MATERIALS
- Nailing of Layers: A Promising Way to Reinforce Concrete 3D Printing Structures
- (2020) A. Perrot et al. Materials
- Mechanical Behavior of Printed Strain Hardening Cementitious Composites
- (2020) Stefan Chaves Figueiredo et al. Materials
- Influence of process parameters on the interlayer bond strength of concrete elements additive manufactured by Shotcrete 3D Printing (SC3DP)
- (2020) Harald Kloft et al. CEMENT AND CONCRETE RESEARCH
- A process classification framework for defining and describing Digital Fabrication with Concrete
- (2020) R.A. Buswell et al. CEMENT AND CONCRETE RESEARCH
- Opportunities and challenges for structural engineering of digitally fabricated concrete
- (2020) Costantino Menna et al. CEMENT AND CONCRETE RESEARCH
- On the emergence of 3D printable Engineered, Strain Hardening Cementitious Composites (ECC/SHCC)
- (2020) Victor C. Li et al. CEMENT AND CONCRETE RESEARCH
- Setting on demand for digital concrete – Principles, measurements, chemistry, validation
- (2020) Lex Reiter et al. CEMENT AND CONCRETE RESEARCH
- Extrusion-based additive manufacturing with cement-based materials – Production steps, processes, and their underlying physics: A review
- (2020) V. Mechtcherine et al. CEMENT AND CONCRETE RESEARCH
- Particle bed 3D printing by selective cement activation – Applications, material and process technology
- (2020) Dirk Lowke et al. CEMENT AND CONCRETE RESEARCH
- Steel fibres reinforced 3D printed concrete: Influence of fibre sizes on mechanical performance
- (2020) Luong Pham et al. CONSTRUCTION AND BUILDING MATERIALS
- Extrusion-Based Additive Manufacturing with Carbon Reinforced Concrete: Concept and Feasibility Study
- (2020) Viktor Mechtcherine et al. Materials
- Numerical simulations of concrete processing: From standard formative casting to additive manufacturing
- (2020) Nicolas Roussel et al. CEMENT AND CONCRETE RESEARCH
- Elastic buckling and plastic collapse during 3D concrete printing
- (2020) A.S.J. Suiker et al. CEMENT AND CONCRETE RESEARCH
- Aggregate-bed 3D concrete printing with cement paste binder
- (2020) Shiwei Yu et al. CEMENT AND CONCRETE RESEARCH
- Mechanical assessment of concrete – Steel bonding in 3D printed elements
- (2020) Bilal Baz et al. CONSTRUCTION AND BUILDING MATERIALS
- Development of 3D-printable ultra-high performance fiber-reinforced concrete for digital construction
- (2020) Arun R. Arunothayan et al. CONSTRUCTION AND BUILDING MATERIALS
- Bond properties of reinforcing bar penetrations in 3D concrete printing
- (2020) Taylor Marchment et al. AUTOMATION IN CONSTRUCTION
- Direct shear test for the assessment of rheological parameters of concrete for 3D printing applications
- (2019) Roshan Jayathilakage et al. MATERIALS AND STRUCTURES
- Printability, accuracy and strength of geopolymer made using powder-based 3D printing for construction applications
- (2019) Ming Xia et al. AUTOMATION IN CONSTRUCTION
- Hardened properties of 3D printed concrete: The influence of process parameters on interlayer adhesion
- (2019) R.J.M. Wolfs et al. CEMENT AND CONCRETE RESEARCH
- Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing
- (2019) Venkatesh Naidu Nerella et al. CONSTRUCTION AND BUILDING MATERIALS
- Method of enhancing interlayer bond strength in construction scale 3D printing with mortar by effective bond area amplification
- (2019) Taylor Marchment et al. MATERIALS & DESIGN
- Underwater 3D printing of cement-based mortar
- (2019) Brahim Mazhoud et al. CONSTRUCTION AND BUILDING MATERIALS
- The Effect of Material Fresh Properties and Process Parameters on Buildability and Interlayer Adhesion of 3D Printed Concrete
- (2019) Biranchi Panda et al. Materials
- Post-processing Methods to Improve Strength of Particle-Bed 3D Printed Geopolymer for Digital Construction Applications
- (2019) Behzad Nematollahi et al. Frontiers in Materials
- Weak bond strength between successive layers in extrusion-based additive manufacturing: measurement and physical origin
- (2019) Emmanuel Keita et al. CEMENT AND CONCRETE RESEARCH
- Digital Concrete: A Review
- (2019) Timothy Wangler et al. CEMENT AND CONCRETE RESEARCH
- Development of the construction processes for reinforced additively constructed concrete
- (2019) Eric L. Kreiger et al. Additive Manufacturing
- Print time vs. elapsed time: A temporal analysis of a continuous printing operation for additive constructed concrete
- (2019) Brandy N. Diggs-McGee et al. Additive Manufacturing
- 3D concrete printing: A lower bound analytical model for buildability performance quantification
- (2019) Jacques Kruger et al. AUTOMATION IN CONSTRUCTION
- Large-scale digital concrete construction – CONPrint3D concept for on-site, monolithic 3D-printing
- (2019) Viktor Mechtcherine et al. AUTOMATION IN CONSTRUCTION
- Triaxial compression testing on early age concrete for numerical analysis of 3D concrete printing
- (2019) R.J.M. Wolfs et al. CEMENT & CONCRETE COMPOSITES
- An ab initio approach for thixotropy characterisation of (nanoparticle-infused) 3D printable concrete
- (2019) Jacques Kruger et al. CONSTRUCTION AND BUILDING MATERIALS
- Mesh reinforcing method for 3D Concrete Printing
- (2019) Taylor Marchment et al. AUTOMATION IN CONSTRUCTION
- 3D concrete printer parameter optimisation for high rate digital construction avoiding plastic collapse
- (2019) Jacques Kruger et al. COMPOSITES PART B-ENGINEERING
- Effect of the printing method and mortar’s workability on pull-out strength of 3D printed elements
- (2019) Bilal Baz et al. CONSTRUCTION AND BUILDING MATERIALS
- Properties of one-part geopolymer incorporating wollastonite as partial replacement of geopolymer precursor or sand
- (2019) Shin Hau Bong et al. MATERIALS LETTERS
- 3D printing using concrete extrusion: A roadmap for research
- (2018) R.A. Buswell et al. CEMENT AND CONCRETE RESEARCH
- Rethinking reinforcement for digital fabrication with concrete
- (2018) Domenico Asprone et al. CEMENT AND CONCRETE RESEARCH
- Rheological requirements for printable concretes
- (2018) Nicolas Roussel CEMENT AND CONCRETE RESEARCH
- Improving flexural characteristics of 3D printed geopolymer composites with in-process steel cable reinforcement
- (2018) Jian Hui Lim et al. CONSTRUCTION AND BUILDING MATERIALS
- 3D printing of reinforced concrete elements: Technology and design approach
- (2018) Domenico Asprone et al. CONSTRUCTION AND BUILDING MATERIALS
- 3D-printed steel reinforcement for digital concrete construction – Manufacture, mechanical properties and bond behaviour
- (2018) Viktor Mechtcherine et al. CONSTRUCTION AND BUILDING MATERIALS
- Effect of surface moisture on inter-layer strength of 3D printed concrete
- (2018) Jay G. Sanjayan et al. CONSTRUCTION AND BUILDING MATERIALS
- Particle-bed 3D printing in concrete construction – Possibilities and challenges
- (2018) Dirk Lowke et al. CEMENT AND CONCRETE RESEARCH
- Micro-cable reinforced geopolymer composite for extrusion-based 3D printing
- (2018) Guowei Ma et al. MATERIALS LETTERS
- Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay
- (2018) Biranchi Panda et al. COMPOSITES PART B-ENGINEERING
- Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material
- (2017) Biranchi Panda et al. MATERIALS LETTERS
- On the reinforcement of cement mortars through 3D printed polymeric and metallic fibers
- (2016) I. Farina et al. COMPOSITES PART B-ENGINEERING
- A new look at the measurement of cementitious paste setting by Vicat test
- (2010) Hassan Sleiman et al. CEMENT AND CONCRETE RESEARCH
- Yield stress during setting of cement pastes from penetration tests
- (2009) D. Lootens et al. CEMENT AND CONCRETE RESEARCH
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now