Deformation mechanisms of Mg-Ca-Zn alloys studied by means of micropillar compression tests

Precipitate strengthening of pyramidal slip in Mg–Zn alloys

(2021) Reza Alizadeh et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Prospects of Using Small Scale Testing to Examine Different Deformation Mechanisms in Nanoscale Single Crystals—A Case Study in Mg

(2021) Daniel Kiener et al.   Crystals

Origins of high ductility exhibited by an extruded magnesium alloy Mg-1.8Zn-0.2Ca: Experiments and crystal plasticity modeling

(2021) Jie Wang et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Mechanistic investigation of a low-alloy Mg–Ca-based extrusion alloy with high strength–ductility synergy

(2020) Hucheng Pan et al.   ACTA MATERIALIA

Interactions between basal dislocations and β1′ precipitates in Mg–4Zn alloy: Mechanisms and strengthening

(2020) R. Alizadeh et al.   ACTA MATERIALIA

Mechanical property evaluation of second phase particles in a Mg–8Al-0.5Zn alloy using micropillar compression

(2020) R. Sarvesha et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Study of basal and pyramidal slips in Mg-Y alloys using micro-pillar compression

(2020) Jing Wu et al.   PHILOSOPHICAL MAGAZINE

Effect of Al content on the critical resolved shear stress for twin nucleation and growth in Mg alloys

(2020) Jingya Wang et al.   ACTA MATERIALIA

An analysis of the influence of the precipitate type on the mechanical behavior of Al - Cu alloys by means of micropillar compression tests

(2020) B. Bellón et al.   ACTA MATERIALIA

Progress in Research on Biodegradable Magnesium Alloys: A Review

(2020) Huan Li et al.   ADVANCED ENGINEERING MATERIALS

Experimental evaluation of critical resolved shear stress for the first-order pyramidal c + a slip in commercially pure Ti by micropillar compression method

(2020) Kyosuke Kishida et al.   ACTA MATERIALIA

Micropillar compression deformation of single crystals of the intermetallic compound Γ-Fe4Zn9

(2020) Yukichika Hashizume et al.   ACTA MATERIALIA

Effect of solute content and temperature on the deformation mechanisms and critical resolved shear stress in Mg-Al and Mg-Zn alloys

(2019) J.-Y. Wang et al.   ACTA MATERIALIA

Improving ductility of a Mg alloy via non-basal slip induced by Ca addition

(2019) Gaoming Zhu et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Designing high ductility in magnesium alloys

(2019) Rasool Ahmad et al.   ACTA MATERIALIA

Alloying effects on the plasticity of magnesium: comprehensive analysis of influences of all five slip systems

(2019) Zhigang Ding et al.   JOURNAL OF PHYSICS-CONDENSED MATTER

Development of low-alloyed and rare-earth-free magnesium alloys having ultra-high strength

(2018) Hucheng Pan et al.   ACTA MATERIALIA

Individual effect of recrystallisation nucleation sites on texture weakening in a magnesium alloy: Part 2- shear bands

(2018) Dikai Guan et al.   ACTA MATERIALIA

In-situ TEM observation of {101¯2} twin-dominated deformation of Mg pillars: Twinning mechanism, size effects and rate dependency

(2018) Jiwon Jeong et al.   ACTA MATERIALIA

Microstructural evolution and deformation behavior of Al-Cu alloys: A Transmission X-ray Microscopy (TXM) and micropillar compression study

(2018) C. Shashank Kaira et al.   ACTA MATERIALIA

Slip transmission of high angle grain boundaries in body-centered cubic metals: Micropillar compression of pure Ta single and bi-crystals

(2018) Jordan S. Weaver et al.   ACTA MATERIALIA

Effect of various Ca content on microstructure and fracture toughness of extruded Mg-2Zn alloys

(2018) Qiang Kang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Mobility of pinned twin boundaries during mechanical loading of extruded binary Mg-1Zn alloy

(2018) Daria Drozdenko et al.   MATERIALS CHARACTERIZATION

Dislocation binding as an origin for the improvement of room temperature ductility in Mg alloys

(2018) Ki-Hyun Kim et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Mechanistic origin and prediction of enhanced ductility in magnesium alloys

(2018) Zhaoxuan Wu et al.   SCIENCE

Characteristic dislocation substructure in 101¯2 twins in hexagonal metals

(2018) F. Wang et al.   SCRIPTA MATERIALIA

Deformation mechanisms, activated slip systems and critical resolved shear stresses in an Mg-LPSO alloy studied by micro-pillar compression

(2018) Ran Chen et al.   MATERIALS & DESIGN

Bake-hardenable Mg–Al–Zn–Mn–Ca sheet alloy processed by twin-roll casting

(2018) M.Z. Bian et al.   ACTA MATERIALIA

Ductility enhancement in Mg-0.2%Ce alloys

(2018) R.K. Sabat et al.   ACTA MATERIALIA

Quantification of precipitate hardening of twin nucleation and growth in Mg and Mg-5Zn using micro-pillar compression

(2018) Jiangting Wang et al.   ACTA MATERIALIA

Dislocation induced twin growth and formation of basal stacking faults in {101¯2} twins in pure Mg

(2018) Fulin Wang et al.   ACTA MATERIALIA

Impact of solute elements on detwinning in magnesium and its alloys

(2017) Yujie Cui et al.   INTERNATIONAL JOURNAL OF PLASTICITY

A rare-earth free magnesium alloy with improved intrinsic ductility

(2017) S. Sandlöbes et al.   Scientific Reports

Atomic-scale segregations at the deformation-induced symmetrical boundary in an Mg-Zn-Y alloy

(2016) X.H. Shao et al.   ACTA MATERIALIA

Texture evolution during static recrystallization of cold-rolled magnesium alloys

(2016) Z.R. Zeng et al.   ACTA MATERIALIA

Effects of dilute additions of Zn and Ca on ductility of magnesium alloy sheet

(2016) Z.R. Zeng et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

First-principles study of energy and atomic solubility of twinning-associated boundaries in hexagonal metals

(2015) Anil Kumar et al.   ACTA MATERIALIA

The different effects of solute segregation at twin boundaries on mechanical behaviors of twinning and detwinning

(2015) Yunchang Xin et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The origins of high hardening and low ductility in magnesium

(2015) Zhaoxuan Wu et al.   NATURE

Solute strengthening of twinning dislocations in Mg alloys

(2014) M. Ghazisaeidi et al.   ACTA MATERIALIA

An inverse optimization strategy to determine single crystal mechanical behavior from polycrystal tests: Application to AZ31 Mg alloy

(2014) V. Herrera-Solaz et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Twin-boundary segregation energies and solute-diffusion activation enthalpies in Mg-based binary systems: A first-principles study

(2014) Jing Zhang et al.   SCRIPTA MATERIALIA

Improved plastic anisotropy of Mg–Zn–Ca alloys exhibiting high-stretch formability: A first-principles study

(2013) Motohiro Yuasa et al.   ACTA MATERIALIA

Basal and non-basal dislocation slip in Mg–Y

(2013) Stefanie Sandlöbes et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of extrusion ratio on microstructure, texture and mechanical properties of indirectly extruded Mg–Zn–Ca alloy

(2013) L.B. Tong et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Periodic Segregation of Solute Atoms in Fully Coherent Twin Boundaries

(2013) J. F. Nie et al.   SCIENCE

Prediction of thermal cross-slip stress in magnesium alloys from a geometric interaction model

(2012) Joseph A. Yasi et al.   ACTA MATERIALIA

The relation between ductility and stacking fault energies in Mg and Mg–Y alloys

(2012) S. Sandlöbes et al.   ACTA MATERIALIA

VESTA 3for three-dimensional visualization of crystal, volumetric and morphology data

(2011) Koichi Momma et al.   JOURNAL OF APPLIED CRYSTALLOGRAPHY

Effects of Ca on Tensile Properties and Stretch Formability at Room Temperature in Mg-Zn and Mg-Al Alloys

(2011) Yasumasa Chino et al.   MATERIALS TRANSACTIONS

On the role of non-basal deformation mechanisms for the ductility of Mg and Mg–Y alloys

(2010) S. Sandlöbes et al.   ACTA MATERIALIA

Solid Solution Strengthening for Mg-3.0 Mass Pct (2.71 At. Pct)Al and Mg-0.06 Mass Pct (0.036 At. Pct)Ca Alloys

(2010) Yasumasa Chino et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Weight Loss with Magnesium Alloys

(2010) T. M. Pollock   SCIENCE

Mechanical properties of Cu6Sn5 intermetallic by micropillar compression testing

(2010) L. Jiang et al.   SCRIPTA MATERIALIA

Microcompression study of Mg (0001) single crystal

(2010) Erica Lilleodden   SCRIPTA MATERIALIA

Transmission electron microscopy study of stacking faults and their interaction with pyramidal dislocations in deformed Mg

(2009) B. Li et al.   ACTA MATERIALIA

Enhancement of tensile ductility and stretch formability of magnesium by addition of 0.2wt%(0.035at%)Ce

(2008) Yasumasa Chino et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Mechanical properties of Mg–Al–Zn alloy with a tilted basal texture obtained by differential speed rolling

(2007) Xinsheng Huang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING