Mechanistic origin and prediction of enhanced ductility in magnesium alloys
Published 2018 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Mechanistic origin and prediction of enhanced ductility in magnesium alloys
Authors
Keywords
-
Journal
SCIENCE
Volume 359, Issue 6374, Pages 447-452
Publisher
American Association for the Advancement of Science (AAAS)
Online
2018-01-26
DOI
10.1126/science.aap8716
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Flow stress and work hardening of Mg-Y alloys
- (2017) A. Kula et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Great room temperature stretch formability of fine-grained Mg-Mn alloy
- (2017) Hidetoshi Somekawa et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of Ca/Al ratio on microstructure and mechanical properties of Mg-Al-Ca-Mn alloys
- (2017) Z.T. Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Energetics of dislocation transformations in hcp metals
- (2016) Zhaoxuan Wu et al. ACTA MATERIALIA
- Influence of Cerium on the Deformation and Corrosion of Magnesium
- (2016) Sravya Tekumalla et al. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
- New hot rolled Mg-4Li-1Ca alloy: A potential candidate for automotive and biodegradable implant applications
- (2016) Y. Estrin et al. MATERIALS LETTERS
- Effect of Multi-Pass Bending Deformation on Microstructure Evolution and Mechanical Properties of AZ31 Alloy Sheet
- (2016) Qingshan Yang et al. Materials Research-Ibero-american Journal of Materials
- Effect of heat treatment on microstructures and mechanical properties of a cast Mg-Y-Nd-Zr alloy
- (2016) Huizhong Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Improving microstructure and mechanical properties in Mg–6 mass% Zn alloys by combined addition of Ca and Ce
- (2016) Yuzhou Du et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of processing route on texture and cold formability of AZ31 Mg alloy sheets processed by ECAP
- (2016) Joungsik Suh et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Enhanced strength and ductility of AZ80 Mg alloys by spray forming and ECAP
- (2016) Lingling Tang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Optimization of Mn content for high strengths in high-speed extruded Mg-0.3Al-0.3Ca (wt%) dilute alloy
- (2016) T. Nakata et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Novel Cross-Slip Mechanism of Pyramidal Screw Dislocations in Magnesium
- (2016) Mitsuhiro Itakura et al. PHYSICAL REVIEW LETTERS
- Mechanism and energetics of 〈c + a〉 dislocation cross-slip in hcp metals
- (2016) Zhaoxuan Wu et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- The use of the fracture initiation parameter F 1 to predict microcrack nucleation at grain boundaries in Mg-2%Gd alloy
- (2016) Conghui Liu et al. MATERIALS & DESIGN
- Effect of microalloying with Ca on the microstructure and mechanical properties of Mg-6 mass%Zn alloys
- (2016) Y.Z. Du et al. MATERIALS & DESIGN
- A cross-shear deformation for optimizing the strength and ductility of AZ31 magnesium alloys
- (2016) Kotiba Hamad et al. Scientific Reports
- Texture and stretch formability of AZ61 and AM60 magnesium alloy sheets processed by high-temperature rolling
- (2015) Xinsheng Huang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure, mechanical behavior and low temperature superplasticity of ECAP processed ZM21 Mg alloy
- (2015) Ehsan Mostaed et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Influence of aluminum content on the texture and sheet formability of AM series magnesium alloys
- (2015) Xinsheng Huang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of Nd and Dy on the microstructure and mechanical property of the as extruded Mg–1Zn–0.6Zr alloy
- (2015) Y.C. Wan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The role of microstructure and texture in controlling mechanical properties of AZ31B magnesium alloy processed by I-ECAP
- (2015) Michal Gzyl et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical behavior of ECAP processed AZ31B over a wide range of loading rates under compression and tension
- (2015) Xia Yu et al. MECHANICS OF MATERIALS
- The origins of high hardening and low ductility in magnesium
- (2015) Zhaoxuan Wu et al. NATURE
- Effects of Primary Processing Techniques and Significance of Hall-Petch Strengthening on the Mechanical Response of Magnesium Matrix Composites Containing TiO2 Nanoparticulates
- (2015) Ganesh Meenashisundaram et al. Nanomaterials
- Enhancing mechanical properties of Mg–Sn alloys by combining addition of Ca and Zn
- (2015) Hucheng Pan et al. MATERIALS & DESIGN
- Ductility improvement of Mg alloys by solid solution: Ab initio modeling, synthesis and mechanical properties
- (2014) S. Sandlöbes et al. ACTA MATERIALIA
- A new mechanism for twin growth in Mg alloys
- (2014) A. Luque et al. ACTA MATERIALIA
- Effect of chemical composition on the microstructure, tensile properties and fatigue behavior of sand-cast Mg–Gd–Y–Zr alloy
- (2014) Longkang Jiang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Hall–Petch Breakdown in Fine-Grained Pure Magnesium at Low Strain Rates
- (2014) Hidetoshi Somekawa et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Magnesium interatomic potential for simulating plasticity and fracture phenomena
- (2014) Z Wu et al. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- Microstructure, mechanical and corrosion properties of Mg–Dy–Gd–Zr alloys for medical applications
- (2013) L. Yang et al. Acta Biomaterialia
- Activation of {102} twinning and slip in high ductile Mg–2.0Zn–0.8Gd rolled sheet with non-basal texture during tensile deformation at room temperature
- (2013) H. Yan et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Ductility improvement by twinning and twin–slip interaction in a Mg-Y alloy
- (2013) Na Zhou et al. MATERIALS & DESIGN
- Asymmetry strain hardening behavior in Mg-3%Al-1%Zn and Mg-8%Gd-3%Y alloy tubes
- (2013) Jie Sun et al. MATERIALS LETTERS
- Influence of initial texture on cold deep drawability of Mg–3Al–1Zn alloy sheets
- (2013) Xinsheng Huang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Basal and non-basal dislocation slip in Mg–Y
- (2013) Stefanie Sandlöbes et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of annealed Mg–0.6wt%Zr sheets by unidirectional and cross rolling
- (2013) Jiangying Xiong et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Point defect modeling in materials: Couplingab initioand elasticity approaches
- (2013) Céline Varvenne et al. PHYSICAL REVIEW B
- Development of a new magnesium alloy ZW21
- (2012) T.J. Chen et al. MATERIALS & DESIGN
- Differentiating the mechanical response of hybridized Mg nano-composites as a function of strain rate
- (2012) M.K. Habibi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Static recrystallization and mechanical properties of Mg–4Y–3RE magnesium alloy sheet processed by differential speed rolling at 823K
- (2012) Xinsheng Huang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- High ductility of a Mg–Y–Ca alloy via extrusion
- (2012) Na Zhou et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of Mg–Gd–Y–Zn–Zr alloy sheets processed by combined processes of extrusion, hot rolling and ageing
- (2012) C. Xu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Structure identification methods for atomistic simulations of crystalline materials
- (2012) Alexander Stukowski MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- Microstructure and Mechanical Properties of Mg-5Nb Metal-Metal Composite Reinforced with Nano SiC Ceramic Particles
- (2012) Jayalakshmi Subramanian et al. Metals
- Prediction of thermal cross-slip stress in magnesium alloys from direct first-principles data
- (2011) Joseph A. Yasi et al. ACTA MATERIALIA
- Improvement of stretch formability of Mg–3Al–1Zn alloy sheet by high temperature rolling at finishing pass
- (2011) Xinsheng Huang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effects of Zinc Concentration on the Stretch Formability at Room Temperature of the Rolled Mg-Zn-Ca Alloys
- (2011) Yasumasa Chino et al. JOURNAL OF THE JAPAN INSTITUTE OF METALS
- Deformation behavior of as-rolled and strip-cast AZ31 magnesium alloy sheets
- (2011) Hyung Lae Kim et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and Mechanical Properties of Magnesium Alloy AZ31 Processed by Compound Channel Extrusion
- (2011) Xiaofei Lei et al. MATERIALS TRANSACTIONS
- Effects of Ca on Tensile Properties and Stretch Formability at Room Temperature in Mg-Zn and Mg-Al Alloys
- (2011) Yasumasa Chino et al. MATERIALS TRANSACTIONS
- Role of Solute in the Texture Modification During Hot Deformation of Mg-Rare Earth Alloys
- (2011) Jason P. Hadorn et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Development of high-strength magnesium alloys via combined processes of extrusion, rolling and ageing
- (2011) R.G. Li et al. SCRIPTA MATERIALIA
- The effect of Gd on the recrystallisation, texture and deformation behaviour of magnesium-based alloys
- (2010) Nicole Stanford et al. ACTA MATERIALIA
- On the role of non-basal deformation mechanisms for the ductility of Mg and Mg–Y alloys
- (2010) S. Sandlöbes et al. ACTA MATERIALIA
- Investigation of tensile–compressive yield asymmetry and the role of deformation twin in extruded pure magnesium
- (2010) E. Sukedai et al. International Journal of Materials Research
- An experimental study of cyclic deformation of extruded AZ61A magnesium alloy
- (2010) Jixi Zhang et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Effect of hot rolling on the microstructure and mechanical properties of Mg–5Al–0.3Mn–2Nd alloy
- (2010) Jianli Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Excellent room-temperature ductility and formability of rolled Mg–Gd–Zn alloy sheets
- (2010) D. Wu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The microstructure, tensile, and shear deformation behavior of an AZ31 magnesium alloy after extrusion and equal channel angular pressing
- (2010) S.M. Masoudpanah et al. MATERIALS & DESIGN
- Room-temperature ductility and anisotropy of two rolled Mg–Zn–Gd alloys
- (2010) H. Yan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of Zn concentration on stretch formability at room temperature of Mg–Zn–Ce alloy
- (2010) Yasumasa Chino et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and super high strength of cast Mg-8.5Gd-2.3Y-1.8Ag-0.4Zr alloy
- (2010) Qudong Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Solid Solution Strengthening for Mg-3.0 Mass Pct (2.71 At. Pct)Al and Mg-0.06 Mass Pct (0.036 At. Pct)Ca Alloys
- (2010) Yasumasa Chino et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Influences of initial texture on microstructure and stretch formability of Mg–3Al–1Zn alloy sheet obtained by a combination of high temperature and subsequent warm rolling
- (2010) Xinsheng Huang et al. SCRIPTA MATERIALIA
- High-ductility magnesium–zinc–cerium extrusion alloys
- (2010) A.A. Luo et al. SCRIPTA MATERIALIA
- Grain refining and property improvement of AZ31 Mg alloy by hot rolling
- (2010) Qing MIAO et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Tensile properties and microstructure of AZ31B magnesium alloy sheet processed by repeated unidirectional bending
- (2010) Guang-sheng HUANG et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Effects of rare-earth elements Gd and Y on the solid solution strengthening of Mg alloys
- (2009) L. Gao et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Texture and stretch formability of a rolled Mg–Zn alloy containing dilute content of Y
- (2009) Yasumasa Chino et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of AZ80 magnesium alloy sheet processed by differential speed rolling
- (2009) Xinsheng Huang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of Mg–10Gd–2Y–0.5Zr alloy recycled by cyclic extrusion compression
- (2009) T. Peng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of rare earth additions on microstructure and texture development of magnesium alloy sheets
- (2009) K. Hantzsche et al. SCRIPTA MATERIALIA
- Dislocation interaction with C in α-Fe: A comparison between atomic simulations and elasticity theory
- (2008) Emmanuel Clouet et al. ACTA MATERIALIA
- Improvement of formability of Mg–Al–Zn alloy sheet at low temperatures using differential speed rolling
- (2008) Xinsheng Huang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Mechanical properties and texture evolution during rolling process of an AZ31 Mg alloy
- (2008) Shujin Liang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effects of alloying elements on microstructures and mechanical properties of wrought Mg–MM–Sn alloy
- (2008) Hyun Kyu Lim et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The room temperature mechanical properties of hot-rolled AZ31 magnesium alloy
- (2008) S.M. Fatemi-Varzaneh et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of yttrium-rich misch metal on the microstructures, mechanical properties and corrosion behavior of die cast AZ91 alloy
- (2008) Jinghuai Zhang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure and high tensile ductility of ZK60 magnesium alloy processed by cyclic extrusion and compression
- (2008) Jinbao Lin et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Solid solution strengthening behaviors in binary Mg–Y single phase alloys
- (2008) L. Gao et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effects of heat treatments on microstructure and mechanical properties of Mg-15Gd-5Y-0.5Zr alloy
- (2008) Yan GAO et al. JOURNAL OF RARE EARTHS
- Microstructure, mechanical and corrosion properties and biocompatibility of Mg–Zn–Mn alloys for biomedical application
- (2008) Erlin Zhang et al. Materials Science & Engineering C-Materials for Biological Applications
- Effects of heat treatment on microstructure and tensile deformation of Mg AZ80 alloy at room temperature
- (2008) I.A. Yakubtsov et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of as-cast AZ31 with the addition of Sb
- (2008) HongBin Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The origin of “rare earth” texture development in extruded Mg-based alloys and its effect on tensile ductility
- (2008) N. Stanford et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Enhancement of tensile ductility and stretch formability of magnesium by addition of 0.2wt%(0.035at%)Ce
- (2008) Yasumasa Chino et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Enhancement of mechanical properties and formability of Mg–MM–Sn–Al–Zn alloy sheets fabricated by cross-rolling method
- (2008) Hyun Kyu Lim et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of Solution Treatment on Microstructure Evolution and Mechanical Properties of Mg-6.0Zn-0.6Y-0.5Zr Alloy Processed by Equal Channel Angular Extrusion
- (2008) Weineng Tang et al. MATERIALS TRANSACTIONS
- Texture and Stretch Formability of Mg-1.5 mass%Zn-0.2 mass%Ce Alloy Rolled at Different Rolling Temperatures
- (2008) Yasumasa Chino et al. MATERIALS TRANSACTIONS
- Enhancement of tensile ductility of magnesium alloy produced by torsion extrusion
- (2008) Y CHINO et al. SCRIPTA MATERIALIA
- Influence of cerium on the texture and ductility of magnesium extrusions
- (2008) Raja K. Mishra et al. SCRIPTA MATERIALIA
- Textures and stretch formability of Mg–6Al–1Zn magnesium alloy sheets rolled at high temperatures up to 793K
- (2008) Xinsheng Huang et al. SCRIPTA MATERIALIA
- Compressive deformation behavior at room temperature – 773K in Mg–0.2mass%(0.035at.%)Ce alloy
- (2007) Yasumasa Chino et al. ACTA MATERIALIA
- Effects of cerium on the microstructure and mechanical properties of Mg–20Zn–8Al alloy
- (2007) Wenlong Xiao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of composition on the texture and deformation behaviour of wrought Mg alloys
- (2007) N. Stanford et al. SCRIPTA MATERIALIA
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started