Architected cellular materials: A review on their mechanical properties towards fatigue-tolerant design and fabrication
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Architected cellular materials: A review on their mechanical properties towards fatigue-tolerant design and fabrication
Authors
Keywords
Architected cellular materials, Cellular structures, Lattice structures, Porous materials, Metamaterials, Additive manufacturing, Fatigue-tolerant
Journal
MATERIALS SCIENCE & ENGINEERING R-REPORTS
Volume 144, Issue -, Pages 100606
Publisher
Elsevier BV
Online
2021-01-15
DOI
10.1016/j.mser.2021.100606
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Corrosion fatigue behavior of additively manufactured biodegradable porous zinc
- (2020) Y. Li et al. Acta Biomaterialia
- Recent advances on notch effects in metal fatigue: A review
- (2020) Ding Liao et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- A data-driven approach for predicting printability in metal additive manufacturing processes
- (2020) William Mycroft et al. JOURNAL OF INTELLIGENT MANUFACTURING
- Data-Driven Finite Elasticity
- (2020) S. Conti et al. ARCHIVE FOR RATIONAL MECHANICS AND ANALYSIS
- Mechanical behaviour of additive manufactured 316L f2ccz lattice structure under static and cyclic loading
- (2020) D. Ashouri et al. INTERNATIONAL JOURNAL OF FATIGUE
- Incorporating residual stresses into a Strain-Energy-Density based fatigue criterion and its application to the assessment of the medium-to-very-high-cycle fatigue strength of shot-peened parts
- (2020) M. Benedetti et al. INTERNATIONAL JOURNAL OF FATIGUE
- Tension-compression asymmetric mechanical behaviour of lattice cellular structures produced by selective laser melting
- (2020) Sunil Raghavendra et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- Design for additive manufacturing: Framework and methodology
- (2020) Tom Vaneker et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Potential and challenges of additive manufacturing for topology optimized spacecraft structures
- (2020) Robin Willner et al. JOURNAL OF LASER APPLICATIONS
- Compressive fatigue properties of additive-manufactured Ti-6Al-4V cellular material with different porosities
- (2020) Ming-Wei Wu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Abrasive flow machining (AFM) finishing of conformal cooling channels created by selective laser melting (SLM)
- (2020) Sangil Han et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Defects as a root cause of fatigue weakening of additively manufactured AlSi10Mg components
- (2020) Paolo Ferro et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Design and Fabrication of New High Entropy Alloys for Evaluating Titanium Replacements in Additive Manufacturing
- (2020) Prashant Sarswat et al. Materials
- A review on integration of lightweight gradient lattice structures in additive manufacturing parts
- (2020) Asliah Seharing et al. Advances in Mechanical Engineering
- Technology advancements for channel wall nozzle manufacturing in liquid rocket engines
- (2020) Paul R. Gradl et al. ACTA ASTRONAUTICA
- Design complexity and performance analysis in additively manufactured heat exchangers
- (2020) Marwan Alsulami et al. The International Journal of Advanced Manufacturing Technology
- Surface roughness effects on the fatigue behaviour of gyroid cellular structures obtained by additive manufacturing
- (2020) Alejandro Yánez et al. INTERNATIONAL JOURNAL OF FATIGUE
- An experimental and numerical study of the high cycle multiaxial fatigue strength of titanium lattice structures produced by Selective Laser Melting (SLM)
- (2020) Khalil Refai et al. INTERNATIONAL JOURNAL OF FATIGUE
- A numerical framework to predict the fatigue life of lattice structures built by additive manufacturing
- (2020) Alexis Burr et al. INTERNATIONAL JOURNAL OF FATIGUE
- The influence of mean strain on the high-cycle fatigue of Nitinol with application to medical devices
- (2020) Hengchu Cao et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- The effects of microporosity in struts of gyroid lattice structures produced by laser powder bed fusion
- (2020) A. du Plessis et al. MATERIALS & DESIGN
- Effect of heat treatment on fatigue behavior of as-built notched Co-Cr-Mo parts produced by Selective Laser Melting
- (2020) Seyed Mohammad Javad Razavi et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue behaviour of additive manufactured materials: An overview of some recent experimental studies on Ti-6Al-4V considering various processing and loading direction effects
- (2019) Ali Fatemi et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Defects as a root cause of fatigue failure of metallic components. I: Basic aspects
- (2019) U. Zerbst et al. ENGINEERING FAILURE ANALYSIS
- Defects as a root cause of fatigue failure of metallic components. III: Cavities, dents, corrosion pits, scratches
- (2019) U. Zerbst et al. ENGINEERING FAILURE ANALYSIS
- Fatigue Behavior of As-Built Selective Laser Melted Titanium Scaffolds with Sheet-based Gyroid Microarchitecture for Bone Tissue Engineering
- (2019) Cambre N. Kelly et al. Acta Biomaterialia
- Corrosion fatigue behavior of additively manufactured biodegradable porous iron
- (2019) Y. Li et al. CORROSION SCIENCE
- Design of metallic bone by additive manufacturing
- (2019) Enrique Alabort et al. SCRIPTA MATERIALIA
- On the fatigue behavior of additive manufactured lattice structures
- (2019) Ali Zargarian et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Directed Energy Deposition versus Wrought Ti-6Al-4V: A Comparison of Microstructure, Fatigue Behavior, and Notch Sensitivity
- (2019) Seyed Mohammad Javad Razavi et al. ADVANCED ENGINEERING MATERIALS
- Model-free data-driven methods in mechanics: material data identification and solvers
- (2019) Laurent Stainier et al. COMPUTATIONAL MECHANICS
- Additive manufacturing for space: status and promises
- (2019) Enea Sacco et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A state-of-the-art review on types, design, optimization, and additive manufacturing of cellular structures
- (2019) Aamer Nazir et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- On the effect of geometrical imperfections and defects on the fatigue strength of cellular lattice structures additively manufactured via Selective Laser Melting
- (2019) M. Dallago et al. INTERNATIONAL JOURNAL OF FATIGUE
- The influence of additive manufacturing processing parameters on surface roughness and fatigue life
- (2019) Joy Gockel et al. INTERNATIONAL JOURNAL OF FATIGUE
- Computational modelling of strut defects in SLM manufactured lattice structures
- (2019) Bill Lozanovski et al. MATERIALS & DESIGN
- Compression-compression fatigue behaviour of Gyroid-type Triply Periodic Minimal Surface porous structures fabricated by Selective Laser Melting
- (2019) Lei Yang et al. ACTA MATERIALIA
- An Investigation of the Enhanced Fatigue Performance of Low-porosity Auxetic Metamaterials
- (2019) L. Francesconi et al. EXPERIMENTAL MECHANICS
- Inverse determination of the fatigue Strain Energy Density control radius for conventionally and additively manufactured rounded V-notches
- (2019) M. Benedetti et al. INTERNATIONAL JOURNAL OF FATIGUE
- The manufacturability and compression properties of the Schwarz Diamond type Ti6Al4V cellular lattice fabricated by selective laser melting
- (2019) Joanna Maszybrocka et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental and numerical investigation on compressive fatigue strength of lattice structures of AlSi7Mg manufactured by SLM
- (2019) L. Boniotti et al. INTERNATIONAL JOURNAL OF FATIGUE
- A novel Strain-Energy-Density based fatigue criterion accounting for mean stress and plasticity effects on the medium-to-high-cycle uniaxial fatigue strength of plain and notched components
- (2019) M. Benedetti et al. INTERNATIONAL JOURNAL OF FATIGUE
- Steels in additive manufacturing: A review of their microstructure and properties
- (2019) P. Bajaj et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Topology optimization and characterization of Ti6Al4V ELI cellular lattice structures by laser powder bed fusion for biomedical applications
- (2019) A.M. Vilardell et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Defect characteristics and analysis of their variability in metal L-PBF additive manufacturing
- (2019) Niloofar Sanaei et al. MATERIALS & DESIGN
- Effects of defects on mechanical properties in metal additive manufacturing: A review focusing on X-ray tomography insights
- (2019) Anton du Plessis et al. MATERIALS & DESIGN
- Mechanical performance and fatigue life prediction of lattice structures: Parametric computational approach
- (2019) Chenxi Peng et al. COMPOSITE STRUCTURES
- Fatigue of additive manufactured Ti-6Al-4V, Part I: The effects of powder feedstock, manufacturing, and post-process conditions on the resulting microstructure and defects
- (2019) J.W. Pegues et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue of additive manufactured Ti-6Al-4V, Part II: The relationship between microstructure, material cyclic properties, and component performance
- (2019) R. Molaei et al. INTERNATIONAL JOURNAL OF FATIGUE
- Review on design and structural optimisation in additive manufacturing: Towards next-generation lightweight structures
- (2019) János Plocher et al. MATERIALS & DESIGN
- SLM lattice structures: Properties, performance, applications and challenges
- (2019) Tobias Maconachie et al. MATERIALS & DESIGN
- Effect of geometry on the mechanical properties of Ti-6Al-4V Gyroid structures fabricated via SLM: A numerical study
- (2019) Eric Yang et al. MATERIALS & DESIGN
- A diagram for capturing and predicting failure locations in notch geometries produced by additive manufacturing
- (2019) Klas Solberg et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue performance of additively manufactured meta-biomaterials: The effects of topology and material type
- (2018) S.M. Ahmadi et al. Acta Biomaterialia
- Effects of nodal fillets and external boundaries on compressive response of an octet truss
- (2018) Ryan M. Latture et al. ACTA MATERIALIA
- Compressive and fatigue behavior of functionally graded Ti-6Al-4V meshes fabricated by electron beam melting
- (2018) S. Zhao et al. ACTA MATERIALIA
- Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
- (2018) Tuan D. Ngo et al. COMPOSITES PART B-ENGINEERING
- Fatigue properties of AlSi10Mg obtained by additive manufacturing: Defect-based modelling and prediction of fatigue strength
- (2018) S. Romano et al. ENGINEERING FRACTURE MECHANICS
- Influence of solidification defects on the fatigue behaviour of heavy-section silicon solution-strengthened ferritic ductile cast irons
- (2018) T. Borsato et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Novel method for the fatigue strength assessment of heavy sections made by ductile cast iron in presence of solidification defects
- (2018) T. Borsato et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Surface roughness effects on the fatigue strength of additively manufactured Ti-6Al-4V
- (2018) Jonathan Pegues et al. INTERNATIONAL JOURNAL OF FATIGUE
- Evaluation and comparison of critical plane criteria for multiaxial fatigue analysis of ductile and brittle materials
- (2018) Shun-Peng Zhu et al. INTERNATIONAL JOURNAL OF FATIGUE
- Online quality inspection using Bayesian classification in powder-bed additive manufacturing from high-resolution visual camera images
- (2018) Masoumeh Aminzadeh et al. JOURNAL OF INTELLIGENT MANUFACTURING
- Heat treatment enhancing the compressive fatigue properties of open-cellular Ti-6Al-4V alloy prototypes fabricated by electron beam melting
- (2018) Wei Yuan et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Fatigue and biological properties of Ti-6Al-4V ELI cellular structures with variously arranged cubic cells made by selective laser melting
- (2018) M. Dallago et al. Journal of the Mechanical Behavior of Biomedical Materials
- Microstructure, precipitates and hardness of selectively laser melted AlSi10Mg alloy before and after heat treatment
- (2018) Le Zhou et al. MATERIALS CHARACTERIZATION
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- Geometric modeling of lattice structures for additive manufacturing
- (2018) Gianpaolo Savio et al. RAPID PROTOTYPING JOURNAL
- Selective laser melting of lattice structures: A statistical approach to manufacturability and mechanical behavior
- (2018) Swee Leong Sing et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Auxetic metamaterials and structures: a review
- (2018) Xin Ren et al. Smart Materials and Structures
- Fatigue Behavior of Porous Ti-6Al-4V Made by Laser-Engineered Net Shaping
- (2018) Seyed Razavi et al. Materials
- Stress Concentration and Mechanical Strength of Cubic Lattice Architectures
- (2018) Paul Lohmuller et al. Materials
- Inconel 625 lattice structures manufactured by selective laser melting (SLM): Mechanical properties, deformation and failure modes
- (2018) Martin Leary et al. MATERIALS & DESIGN
- Mechanical properties and deformation behavior of additively manufactured lattice structures of stainless steel
- (2018) Patrick Köhnen et al. MATERIALS & DESIGN
- Fatigue behaviour and equivalent diameter of single Ti-6Al-4V struts fabricated by Electron Bean Melting orientated to porous lattice structures
- (2018) A. Pérez-Sánchez et al. MATERIALS & DESIGN
- Optimization of selective laser melting parameters and influence of post heat treatment on microstructure and mechanical properties of maraging steel
- (2018) James Mutua et al. MATERIALS & DESIGN
- Compression behavior of lattice structures produced by selective laser melting: X-ray tomography based experimental and finite element approaches
- (2018) Yasin Amani et al. ACTA MATERIALIA
- Defect analysis and fatigue design basis for Ni-based superalloy 718 manufactured by selective laser melting
- (2018) Yoichi Yamashita et al. INTERNATIONAL JOURNAL OF FATIGUE
- Mechanical Properties and In Situ Deformation Imaging of Microlattices Manufactured by Laser Based Powder Bed Fusion
- (2018) Anton Du Plessis et al. Materials
- Fatigue life of additively manufactured Ti6Al4V scaffolds under tension-tension, tension-compression and compression-compression fatigue load
- (2018) Karel Lietaert et al. Scientific Reports
- Bioinspired hierarchical composite design using machine learning: simulation, additive manufacturing, and experiment
- (2018) Grace X. Gu et al. Materials Horizons
- X-Ray Microcomputed Tomography in Additive Manufacturing: A Review of the Current Technology and Applications
- (2018) Anton du Plessis et al. 3D Printing and Additive Manufacturing
- From microstructural design to surface engineering: A tailored approach for improving fatigue life of additively manufactured meta-biomaterials
- (2018) S.M. Ahmadi et al. Acta Biomaterialia
- Notch fatigue and crack growth resistance of Ti-6Al-4V ELI additively manufactured via selective laser melting: A critical distance approach to defect sensitivity
- (2018) M. Benedetti et al. INTERNATIONAL JOURNAL OF FATIGUE
- A deep neural network for classification of melt-pool images in metal additive manufacturing
- (2018) Ohyung Kwon et al. JOURNAL OF INTELLIGENT MANUFACTURING
- Data-driven evaluation of fatigue performance of additive manufactured parts using miniature specimens
- (2018) H.Y. Wan et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Effect of Unit Cell Type and Pore Size on Porosity and Mechanical Behavior of Additively Manufactured Ti6Al4V Scaffolds
- (2018) Haizum Zaharin et al. Materials
- Improved Mechanical Properties and Energy Absorption of BCC Lattice Structures with Triply Periodic Minimal Surfaces Fabricated by SLM
- (2018) Miao Zhao et al. Materials
- Study of Size Effect on Microstructure and Mechanical Properties of AlSi10Mg Samples Made by Selective Laser Melting
- (2018) Zhichao Dong et al. Materials
- Mechanical performance of additively manufactured meta-biomaterials
- (2018) Amir A. Zadpoor Acta Biomaterialia
- State of the art of corner point singularities under in-plane and out-of-plane loading
- (2017) Les P. Pook et al. ENGINEERING FRACTURE MECHANICS
- Data-driven computing in dynamics
- (2017) T. Kirchdoerfer et al. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- Common defects and contributing parameters in powder bed fusion AM process and their classification for online monitoring and control: a review
- (2017) Ehsan Malekipour et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Generalized probabilistic model allowing for various fatigue damage variables
- (2017) José Correia et al. INTERNATIONAL JOURNAL OF FATIGUE
- Additive manufacturing of fatigue resistant materials: Challenges and opportunities
- (2017) Aref Yadollahi et al. INTERNATIONAL JOURNAL OF FATIGUE
- Mechanical properties of open-cell rhombic dodecahedron titanium alloy lattice structure manufactured using electron beam melting under dynamic loading
- (2017) Lijun Xiao et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Orthotropic elastic constants of 2D cellular structures with variously arranged square cells: The effect of filleted wall junctions
- (2017) M. Dallago et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Effect of Build Angle on Surface Properties of Nickel Superalloys Processed by Selective Laser Melting
- (2017) Ernesto E. Covarrubias et al. JOM
- Qualification of Ti6Al4V ELI Alloy Produced by Laser Powder Bed Fusion for Biomedical Applications
- (2017) I. Yadroitsev et al. JOM
- A Survey of Modeling of Lattice Structures Fabricated by Additive Manufacturing
- (2017) Guoying Dong et al. JOURNAL OF MECHANICAL DESIGN
- Fatigue behaviour of NiTi shape memory alloy scaffolds produced by SLM, a unit cell design comparison
- (2017) M. Speirs et al. Journal of the Mechanical Behavior of Biomedical Materials
- Effects of applied stress ratio on the fatigue behavior of additively manufactured porous biomaterials under compressive loading
- (2017) Joep de Krijger et al. Journal of the Mechanical Behavior of Biomedical Materials
- Compensation strategy to reduce geometry and mechanics mismatches in porous biomaterials built with Selective Laser Melting
- (2017) Zahra S. Bagheri et al. Journal of the Mechanical Behavior of Biomedical Materials
- The effect of post-sintering treatments on the fatigue and biological behavior of Ti-6Al-4V ELI parts made by selective laser melting
- (2017) M. Benedetti et al. Journal of the Mechanical Behavior of Biomedical Materials
- How does tissue regeneration influence the mechanical behavior of additively manufactured porous biomaterials?
- (2017) R. Hedayati et al. Journal of the Mechanical Behavior of Biomedical Materials
- Elastic and failure response of imperfect three-dimensional metallic lattices: the role of geometric defects induced by Selective Laser Melting
- (2017) Lu Liu et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Metallic powder-bed based 3D printing of cellular scaffolds for orthopaedic implants: A state-of-the-art review on manufacturing, topological design, mechanical properties and biocompatibility
- (2017) X.P. Tan et al. Materials Science & Engineering C-Materials for Biological Applications
- Fatigue strength of blunt V-notched specimens produced by selective laser melting of Ti-6Al-4V
- (2017) S.M.J. Razavi et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Auxetic mechanical metamaterials
- (2017) H. M. A. Kolken et al. RSC Advances
- Fatigue Assessment of Ti–6Al–4V Circular Notched Specimens Produced by Selective Laser Melting
- (2017) Seyed-Mohammad-Javad Razavi et al. Metals
- Improved fatigue endurance ratio of additive manufactured Ti-6Al-4V lattice by hot isostatic pressing
- (2017) Ming-Wei Wu et al. MATERIALS & DESIGN
- Qualification of AM parts: Extreme value statistics applied to tomographic measurements
- (2017) S. Romano et al. MATERIALS & DESIGN
- The influence of laser parameters and scanning strategies on the mechanical properties of a stochastic porous material
- (2017) Shaaz Ghouse et al. MATERIALS & DESIGN
- Influence of load orientation and of types of loads on the mechanical properties of porous Ti6Al4V biomaterials
- (2017) A. Cuadrado et al. MATERIALS & DESIGN
- High-strength porous biomaterials for bone replacement: A strategy to assess the interplay between cell morphology, mechanical properties, bone ingrowth and manufacturing constraints
- (2016) Sajad Arabnejad et al. Acta Biomaterialia
- Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
- (2016) Xiaojian Wang et al. BIOMATERIALS
- Data-driven computational mechanics
- (2016) T. Kirchdoerfer et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials
- (2016) R. Hedayati et al. INTERNATIONAL JOURNAL OF FATIGUE
- The tensile ductility of cellular Solids: The role of imperfections
- (2016) William Ronan et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Additive Manufacturing of High-Entropy Alloys by Laser Processing
- (2016) V. Ocelík et al. JOM
- Evaluation of genetic programming-based models for simulating bead dimensions in wire and arc additive manufacturing
- (2016) Biranchi Panda et al. JOURNAL OF INTELLIGENT MANUFACTURING
- Fully porous 3D printed titanium femoral stem to reduce stress-shielding following total hip arthroplasty
- (2016) Sajad Arabnejad et al. JOURNAL OF ORTHOPAEDIC RESEARCH
- The influence of cell morphology on the compressive fatigue behavior of Ti-6Al-4V meshes fabricated by electron beam melting
- (2016) S. Zhao et al. Journal of the Mechanical Behavior of Biomedical Materials
- Additive manufacturing and mechanical characterization of graded porosity scaffolds designed based on triply periodic minimal surface architectures
- (2016) M. Afshar et al. Journal of the Mechanical Behavior of Biomedical Materials
- Fatigue behavior of highly porous titanium produced by powder metallurgy with temporary space holders
- (2016) Sedat Özbilen et al. Materials Science & Engineering C-Materials for Biological Applications
- Numerical simulation of the fatigue behavior of additive manufactured titanium porous lattice structures
- (2016) A. Zargarian et al. Materials Science & Engineering C-Materials for Biological Applications
- Mechanical behavior of additive manufactured, powder-bed laser-fused materials
- (2016) Todd M. Mower et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
- (2016) Zhiming Li et al. NATURE
- Surface texture metrology for metal additive manufacturing: a review
- (2016) A. Townsend et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- A Review on Fatigue Life Prediction Methods for Metals
- (2016) E. Santecchia et al. Advances in Materials Science and Engineering
- Fatigue behavior of IN718 microtrusses produced via additive manufacturing
- (2016) Lena Huynh et al. MATERIALS & DESIGN
- Spatial and geometrical-based characterization of microstructure and microhardness for an electron beam melted Ti–6Al–4V component
- (2016) Pan Wang et al. MATERIALS & DESIGN
- Selective laser melting (SLM) of AlSi12Mg lattice structures
- (2016) Martin Leary et al. MATERIALS & DESIGN
- Mechanical Properties of a New Type of Architected Interpenetrating Phase Composite Materials
- (2016) Oraib Al-Ketan et al. Advanced Materials Technologies
- Revealing martensitic transformation and α/β interface evolution in electron beam melting three-dimensional-printed Ti-6Al-4V
- (2016) Xipeng Tan et al. Scientific Reports
- Additive Manufacturing of 17-4 PH Stainless Steel: Post-processing Heat Treatment to Achieve Uniform Reproducible Microstructure
- (2015) Sudha Cheruvathur et al. JOM
- An experimental and simulation study on build thickness dependent microstructure for electron beam melted Ti–6Al–4V
- (2015) Xipeng Tan et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Build orientation optimization for multi-part production in additive manufacturing
- (2015) Yicha Zhang et al. JOURNAL OF INTELLIGENT MANUFACTURING
- Design guidelines for laser additive manufacturing of lightweight structures in TiAl6V4
- (2015) J. Kranz et al. JOURNAL OF LASER APPLICATIONS
- Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting
- (2015) Galina Kasperovich et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Fatigue of Nitinol: The state-of-the-art and ongoing challenges
- (2015) M.J. Mahtabi et al. Journal of the Mechanical Behavior of Biomedical Materials
- Relationship between unit cell type and porosity and the fatigue behavior of selective laser melted meta-biomaterials
- (2015) S. Amin Yavari et al. Journal of the Mechanical Behavior of Biomedical Materials
- Ti–6Al–4V triply periodic minimal surface structures for bone implants fabricated via selective laser melting
- (2015) Chunze Yan et al. Journal of the Mechanical Behavior of Biomedical Materials
- Failure mechanisms of additively manufactured porous biomaterials: Effects of porosity and type of unit cell
- (2015) J. Kadkhodapour et al. Journal of the Mechanical Behavior of Biomedical Materials
- Local strain energy density to predict mode II brittle fracture in Brazilian disk specimens weakened by V-notches with end holes
- (2015) A.R. Torabi et al. MATERIALS & DESIGN
- Structural characterization of biomedical Co–Cr–Mo components produced by direct metal laser sintering
- (2015) G. Barucca et al. Materials Science & Engineering C-Materials for Biological Applications
- Revival of pure titanium for dynamically loaded porous implants using additive manufacturing
- (2015) Ruben Wauthle et al. Materials Science & Engineering C-Materials for Biological Applications
- Influence of processing conditions on strut structure and compressive properties of cellular lattice structures fabricated by selective laser melting
- (2015) Chunlei Qiu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Machine learning applications in genetics and genomics
- (2015) Maxwell W. Libbrecht et al. NATURE REVIEWS GENETICS
- A generalized strain energy density criterion for mixed mode fracture analysis in brittle and quasi-brittle materials
- (2015) M.R. Ayatollahi et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi
- (2015) ZiJiao Zhang et al. Nature Communications
- Additively Manufactured Open-Cell Porous Biomaterials Made from Six Different Space-Filling Unit Cells: The Mechanical and Morphological Properties
- (2015) Seyed Ahmadi et al. Materials
- Influence of cell shape on mechanical properties of Ti–6Al–4V meshes fabricated by electron beam melting method
- (2014) S.J. Li et al. Acta Biomaterialia
- Numerical investigation on mechanical properties of cellular lattice structures fabricated by fused deposition modeling
- (2014) M.R. Karamooz Ravari et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- On the fatigue properties of metals manufactured by selective laser melting – The role of ductility
- (2014) Stefan Leuders et al. JOURNAL OF MATERIALS RESEARCH
- Mechanical behavior of regular open-cell porous biomaterials made of diamond lattice unit cells
- (2014) S.M. Ahmadi et al. Journal of the Mechanical Behavior of Biomedical Materials
- Design optimization of supports for overhanging structures in aluminum and titanium alloys by selective laser melting
- (2014) F. Calignano MATERIALS & DESIGN
- High temperature fatigue tests of un-notched and notched specimens made of 40CrMoV13.9 steel
- (2014) Filippo Berto et al. MATERIALS & DESIGN
- Lattice Structures Manufactured by SLM: On the Effect of Geometrical Dimensions on Microstructure Evolution During Processing
- (2014) Thomas Niendorf et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Manufacturing and Characterization of Ti6Al4V Lattice Components Manufactured by Selective Laser Melting
- (2014) Sabina Campanelli et al. Materials
- Mechanical properties of lattice materials via asymptotic homogenization and comparison with alternative homogenization methods
- (2013) Sajad Arabnejad et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Fatigue behavior of thin-walled grade 2 titanium samples processed by selective laser melting. Application to life prediction of porous titanium implants
- (2013) P. Lipinski et al. Journal of the Mechanical Behavior of Biomedical Materials
- Fatigue design of a mechanically biocompatible lattice for a proof-of-concept femoral stem
- (2013) Sajad Arabnejad Khanoki et al. Journal of the Mechanical Behavior of Biomedical Materials
- Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing
- (2013) G. Campoli et al. MATERIALS & DESIGN
- Advanced lightweight 316L stainless steel cellular lattice structures fabricated via selective laser melting
- (2013) Chunze Yan et al. MATERIALS & DESIGN
- Fatigue behavior of porous biomaterials manufactured using selective laser melting
- (2013) S. Amin Yavari et al. Materials Science & Engineering C-Materials for Biological Applications
- Recent developments in brittle and quasi-brittle failure assessment of engineering materials by means of local approaches
- (2013) F. Berto et al. MATERIALS SCIENCE & ENGINEERING R-REPORTS
- Static mechanical behaviours of stainless steel micro-lattice structures under different loading conditions
- (2013) Recep Gümrük et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Surface Roughness and Morphology Customization of Additive Manufactured Open Porous Ti6Al4V Structures
- (2013) Grzegorz Pyka et al. Materials
- High-Resolution Microfocus X-Ray Computed Tomography for 3D Surface Roughness Measurements of Additive Manufactured Porous Materials
- (2012) Greet Kerckhofs et al. ADVANCED ENGINEERING MATERIALS
- Stiffness and strength of tridimensional periodic lattices
- (2012) Andrea Vigliotti et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Research on the fabricating quality optimization of the overhanging surface in SLM process
- (2012) Di Wang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Fatigue design of lattice materials via computational mechanics: Application to lattices with smooth transitions in cell geometry
- (2012) Ehsan Masoumi Khalil Abad et al. INTERNATIONAL JOURNAL OF FATIGUE
- On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance
- (2012) S. Leuders et al. INTERNATIONAL JOURNAL OF FATIGUE
- Finite element modelling of the compressive response of lattice structures manufactured using the selective laser melting technique
- (2012) M. Smith et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Compression deformation behavior of Ti–6Al–4V alloy with cellular structures fabricated by electron beam melting
- (2012) X.Y. Cheng et al. Journal of the Mechanical Behavior of Biomedical Materials
- Compression fatigue behavior of Ti–6Al–4V mesh arrays fabricated by electron beam melting
- (2011) S.J. Li et al. ACTA MATERIALIA
- Multiparametric full-field representations of the in-plane stress fields ahead of cracked components under mixed mode loading
- (2011) F. Berto et al. INTERNATIONAL JOURNAL OF FATIGUE
- Compression-compression fatigue of selective electron beam melted cellular titanium (Ti-6Al-4V)
- (2011) Nikolas W. Hrabe et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Finite element analysis of the mechanical properties of cellular aluminium based on micro-computed tomography
- (2011) C. Veyhl et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Micro-CT-based improvement of geometrical and mechanical controllability of selective laser melted Ti6Al4V porous structures
- (2011) S. Van Bael et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- On higher order terms and out-of-plane singular mode
- (2011) F. Berto et al. MECHANICS OF MATERIALS
- As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting
- (2011) T. Vilaro et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructural size effects on mechanical properties of high purity nickel
- (2010) C. Keller et al. INTERNATIONAL JOURNAL OF PLASTICITY
- The Influence of Processing Parameters on the Mechanical Properties of Selectively Laser Melted Stainless Steel Microlattice Structures
- (2010) S. Tsopanos et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Fracture assessment of U-notches under three point bending by means of local energy density
- (2010) F. Berto et al. MATERIALS & DESIGN
- Strong crystal size effect on deformation twinning
- (2010) Qian Yu et al. NATURE
- Next-generation biomedical implants using additive manufacturing of complex, cellular and functional mesh arrays
- (2010) L. E. Murr et al. PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES
- Ductility of a Ti‐6Al‐4V alloy produced by selective laser melting of prealloyed powders
- (2010) Luca Facchini et al. RAPID PROTOTYPING JOURNAL
- Selective laser melting: A unit cell approach for the manufacture of porous, titanium, bone in-growth constructs, suitable for orthopedic applications. II. Randomized structures
- (2009) Lewis Mullen et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Effect of the oxygen content in solution on the static and cyclic deformation of titanium foams
- (2009) L. P. Lefebvre et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM)
- (2009) Jayanthi Parthasarathy et al. Journal of the Mechanical Behavior of Biomedical Materials
- A review of the volume-based strain energy density approach applied to V-notches and welded structures
- (2009) F. Berto et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Mechanical response of cellular solids: Role of cellular topology and microstructural irregularity
- (2008) M. Alkhader et al. INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE
- Microstructure and mechanical behavior of Ti–6Al–4V produced by rapid-layer manufacturing, for biomedical applications
- (2008) L.E. Murr et al. Journal of the Mechanical Behavior of Biomedical Materials
- Investigation of the fatigue behavior of open cell foams by a micromechanical 3-D model
- (2008) Serkan Demiray et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started