Architected cellular materials: A review on their mechanical properties towards fatigue-tolerant design and fabrication
出版年份 2021 全文链接
标题
Architected cellular materials: A review on their mechanical properties towards fatigue-tolerant design and fabrication
作者
关键词
Architected cellular materials, Cellular structures, Lattice structures, Porous materials, Metamaterials, Additive manufacturing, Fatigue-tolerant
出版物
MATERIALS SCIENCE & ENGINEERING R-REPORTS
Volume 144, Issue -, Pages 100606
出版商
Elsevier BV
发表日期
2021-01-15
DOI
10.1016/j.mser.2021.100606
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Corrosion fatigue behavior of additively manufactured biodegradable porous zinc
- (2020) Y. Li et al. Acta Biomaterialia
- Recent advances on notch effects in metal fatigue: A review
- (2020) Ding Liao et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- A data-driven approach for predicting printability in metal additive manufacturing processes
- (2020) William Mycroft et al. JOURNAL OF INTELLIGENT MANUFACTURING
- Data-Driven Finite Elasticity
- (2020) S. Conti et al. ARCHIVE FOR RATIONAL MECHANICS AND ANALYSIS
- Mechanical behaviour of additive manufactured 316L f2ccz lattice structure under static and cyclic loading
- (2020) D. Ashouri et al. INTERNATIONAL JOURNAL OF FATIGUE
- Incorporating residual stresses into a Strain-Energy-Density based fatigue criterion and its application to the assessment of the medium-to-very-high-cycle fatigue strength of shot-peened parts
- (2020) M. Benedetti et al. INTERNATIONAL JOURNAL OF FATIGUE
- Tension-compression asymmetric mechanical behaviour of lattice cellular structures produced by selective laser melting
- (2020) Sunil Raghavendra et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- Design for additive manufacturing: Framework and methodology
- (2020) Tom Vaneker et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Potential and challenges of additive manufacturing for topology optimized spacecraft structures
- (2020) Robin Willner et al. JOURNAL OF LASER APPLICATIONS
- Compressive fatigue properties of additive-manufactured Ti-6Al-4V cellular material with different porosities
- (2020) Ming-Wei Wu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Abrasive flow machining (AFM) finishing of conformal cooling channels created by selective laser melting (SLM)
- (2020) Sangil Han et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Defects as a root cause of fatigue weakening of additively manufactured AlSi10Mg components
- (2020) Paolo Ferro et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Design and Fabrication of New High Entropy Alloys for Evaluating Titanium Replacements in Additive Manufacturing
- (2020) Prashant Sarswat et al. Materials
- A review on integration of lightweight gradient lattice structures in additive manufacturing parts
- (2020) Asliah Seharing et al. Advances in Mechanical Engineering
- Technology advancements for channel wall nozzle manufacturing in liquid rocket engines
- (2020) Paul R. Gradl et al. ACTA ASTRONAUTICA
- Design complexity and performance analysis in additively manufactured heat exchangers
- (2020) Marwan Alsulami et al. The International Journal of Advanced Manufacturing Technology
- Surface roughness effects on the fatigue behaviour of gyroid cellular structures obtained by additive manufacturing
- (2020) Alejandro Yánez et al. INTERNATIONAL JOURNAL OF FATIGUE
- An experimental and numerical study of the high cycle multiaxial fatigue strength of titanium lattice structures produced by Selective Laser Melting (SLM)
- (2020) Khalil Refai et al. INTERNATIONAL JOURNAL OF FATIGUE
- A numerical framework to predict the fatigue life of lattice structures built by additive manufacturing
- (2020) Alexis Burr et al. INTERNATIONAL JOURNAL OF FATIGUE
- The influence of mean strain on the high-cycle fatigue of Nitinol with application to medical devices
- (2020) Hengchu Cao et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- The effects of microporosity in struts of gyroid lattice structures produced by laser powder bed fusion
- (2020) A. du Plessis et al. MATERIALS & DESIGN
- Effect of heat treatment on fatigue behavior of as-built notched Co-Cr-Mo parts produced by Selective Laser Melting
- (2020) Seyed Mohammad Javad Razavi et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue behaviour of additive manufactured materials: An overview of some recent experimental studies on Ti-6Al-4V considering various processing and loading direction effects
- (2019) Ali Fatemi et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Defects as a root cause of fatigue failure of metallic components. I: Basic aspects
- (2019) U. Zerbst et al. ENGINEERING FAILURE ANALYSIS
- Defects as a root cause of fatigue failure of metallic components. III: Cavities, dents, corrosion pits, scratches
- (2019) U. Zerbst et al. ENGINEERING FAILURE ANALYSIS
- Fatigue Behavior of As-Built Selective Laser Melted Titanium Scaffolds with Sheet-based Gyroid Microarchitecture for Bone Tissue Engineering
- (2019) Cambre N. Kelly et al. Acta Biomaterialia
- Corrosion fatigue behavior of additively manufactured biodegradable porous iron
- (2019) Y. Li et al. CORROSION SCIENCE
- Design of metallic bone by additive manufacturing
- (2019) Enrique Alabort et al. SCRIPTA MATERIALIA
- On the fatigue behavior of additive manufactured lattice structures
- (2019) Ali Zargarian et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Directed Energy Deposition versus Wrought Ti-6Al-4V: A Comparison of Microstructure, Fatigue Behavior, and Notch Sensitivity
- (2019) Seyed Mohammad Javad Razavi et al. ADVANCED ENGINEERING MATERIALS
- Model-free data-driven methods in mechanics: material data identification and solvers
- (2019) Laurent Stainier et al. COMPUTATIONAL MECHANICS
- Additive manufacturing for space: status and promises
- (2019) Enea Sacco et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A state-of-the-art review on types, design, optimization, and additive manufacturing of cellular structures
- (2019) Aamer Nazir et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- On the effect of geometrical imperfections and defects on the fatigue strength of cellular lattice structures additively manufactured via Selective Laser Melting
- (2019) M. Dallago et al. INTERNATIONAL JOURNAL OF FATIGUE
- The influence of additive manufacturing processing parameters on surface roughness and fatigue life
- (2019) Joy Gockel et al. INTERNATIONAL JOURNAL OF FATIGUE
- Computational modelling of strut defects in SLM manufactured lattice structures
- (2019) Bill Lozanovski et al. MATERIALS & DESIGN
- Compression-compression fatigue behaviour of Gyroid-type Triply Periodic Minimal Surface porous structures fabricated by Selective Laser Melting
- (2019) Lei Yang et al. ACTA MATERIALIA
- An Investigation of the Enhanced Fatigue Performance of Low-porosity Auxetic Metamaterials
- (2019) L. Francesconi et al. EXPERIMENTAL MECHANICS
- Inverse determination of the fatigue Strain Energy Density control radius for conventionally and additively manufactured rounded V-notches
- (2019) M. Benedetti et al. INTERNATIONAL JOURNAL OF FATIGUE
- The manufacturability and compression properties of the Schwarz Diamond type Ti6Al4V cellular lattice fabricated by selective laser melting
- (2019) Joanna Maszybrocka et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental and numerical investigation on compressive fatigue strength of lattice structures of AlSi7Mg manufactured by SLM
- (2019) L. Boniotti et al. INTERNATIONAL JOURNAL OF FATIGUE
- A novel Strain-Energy-Density based fatigue criterion accounting for mean stress and plasticity effects on the medium-to-high-cycle uniaxial fatigue strength of plain and notched components
- (2019) M. Benedetti et al. INTERNATIONAL JOURNAL OF FATIGUE
- Steels in additive manufacturing: A review of their microstructure and properties
- (2019) P. Bajaj et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Topology optimization and characterization of Ti6Al4V ELI cellular lattice structures by laser powder bed fusion for biomedical applications
- (2019) A.M. Vilardell et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Defect characteristics and analysis of their variability in metal L-PBF additive manufacturing
- (2019) Niloofar Sanaei et al. MATERIALS & DESIGN
- Effects of defects on mechanical properties in metal additive manufacturing: A review focusing on X-ray tomography insights
- (2019) Anton du Plessis et al. MATERIALS & DESIGN
- Mechanical performance and fatigue life prediction of lattice structures: Parametric computational approach
- (2019) Chenxi Peng et al. COMPOSITE STRUCTURES
- Fatigue of additive manufactured Ti-6Al-4V, Part I: The effects of powder feedstock, manufacturing, and post-process conditions on the resulting microstructure and defects
- (2019) J.W. Pegues et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue of additive manufactured Ti-6Al-4V, Part II: The relationship between microstructure, material cyclic properties, and component performance
- (2019) R. Molaei et al. INTERNATIONAL JOURNAL OF FATIGUE
- Review on design and structural optimisation in additive manufacturing: Towards next-generation lightweight structures
- (2019) János Plocher et al. MATERIALS & DESIGN
- SLM lattice structures: Properties, performance, applications and challenges
- (2019) Tobias Maconachie et al. MATERIALS & DESIGN
- Effect of geometry on the mechanical properties of Ti-6Al-4V Gyroid structures fabricated via SLM: A numerical study
- (2019) Eric Yang et al. MATERIALS & DESIGN
- A diagram for capturing and predicting failure locations in notch geometries produced by additive manufacturing
- (2019) Klas Solberg et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue performance of additively manufactured meta-biomaterials: The effects of topology and material type
- (2018) S.M. Ahmadi et al. Acta Biomaterialia
- Effects of nodal fillets and external boundaries on compressive response of an octet truss
- (2018) Ryan M. Latture et al. ACTA MATERIALIA
- Compressive and fatigue behavior of functionally graded Ti-6Al-4V meshes fabricated by electron beam melting
- (2018) S. Zhao et al. ACTA MATERIALIA
- Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
- (2018) Tuan D. Ngo et al. COMPOSITES PART B-ENGINEERING
- Fatigue properties of AlSi10Mg obtained by additive manufacturing: Defect-based modelling and prediction of fatigue strength
- (2018) S. Romano et al. ENGINEERING FRACTURE MECHANICS
- Influence of solidification defects on the fatigue behaviour of heavy-section silicon solution-strengthened ferritic ductile cast irons
- (2018) T. Borsato et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Novel method for the fatigue strength assessment of heavy sections made by ductile cast iron in presence of solidification defects
- (2018) T. Borsato et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Surface roughness effects on the fatigue strength of additively manufactured Ti-6Al-4V
- (2018) Jonathan Pegues et al. INTERNATIONAL JOURNAL OF FATIGUE
- Evaluation and comparison of critical plane criteria for multiaxial fatigue analysis of ductile and brittle materials
- (2018) Shun-Peng Zhu et al. INTERNATIONAL JOURNAL OF FATIGUE
- Online quality inspection using Bayesian classification in powder-bed additive manufacturing from high-resolution visual camera images
- (2018) Masoumeh Aminzadeh et al. JOURNAL OF INTELLIGENT MANUFACTURING
- Heat treatment enhancing the compressive fatigue properties of open-cellular Ti-6Al-4V alloy prototypes fabricated by electron beam melting
- (2018) Wei Yuan et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Fatigue and biological properties of Ti-6Al-4V ELI cellular structures with variously arranged cubic cells made by selective laser melting
- (2018) M. Dallago et al. Journal of the Mechanical Behavior of Biomedical Materials
- Microstructure, precipitates and hardness of selectively laser melted AlSi10Mg alloy before and after heat treatment
- (2018) Le Zhou et al. MATERIALS CHARACTERIZATION
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- Geometric modeling of lattice structures for additive manufacturing
- (2018) Gianpaolo Savio et al. RAPID PROTOTYPING JOURNAL
- Selective laser melting of lattice structures: A statistical approach to manufacturability and mechanical behavior
- (2018) Swee Leong Sing et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Auxetic metamaterials and structures: a review
- (2018) Xin Ren et al. Smart Materials and Structures
- Fatigue Behavior of Porous Ti-6Al-4V Made by Laser-Engineered Net Shaping
- (2018) Seyed Razavi et al. Materials
- Stress Concentration and Mechanical Strength of Cubic Lattice Architectures
- (2018) Paul Lohmuller et al. Materials
- Inconel 625 lattice structures manufactured by selective laser melting (SLM): Mechanical properties, deformation and failure modes
- (2018) Martin Leary et al. MATERIALS & DESIGN
- Mechanical properties and deformation behavior of additively manufactured lattice structures of stainless steel
- (2018) Patrick Köhnen et al. MATERIALS & DESIGN
- Fatigue behaviour and equivalent diameter of single Ti-6Al-4V struts fabricated by Electron Bean Melting orientated to porous lattice structures
- (2018) A. Pérez-Sánchez et al. MATERIALS & DESIGN
- Optimization of selective laser melting parameters and influence of post heat treatment on microstructure and mechanical properties of maraging steel
- (2018) James Mutua et al. MATERIALS & DESIGN
- Compression behavior of lattice structures produced by selective laser melting: X-ray tomography based experimental and finite element approaches
- (2018) Yasin Amani et al. ACTA MATERIALIA
- Defect analysis and fatigue design basis for Ni-based superalloy 718 manufactured by selective laser melting
- (2018) Yoichi Yamashita et al. INTERNATIONAL JOURNAL OF FATIGUE
- Mechanical Properties and In Situ Deformation Imaging of Microlattices Manufactured by Laser Based Powder Bed Fusion
- (2018) Anton Du Plessis et al. Materials
- Fatigue life of additively manufactured Ti6Al4V scaffolds under tension-tension, tension-compression and compression-compression fatigue load
- (2018) Karel Lietaert et al. Scientific Reports
- Bioinspired hierarchical composite design using machine learning: simulation, additive manufacturing, and experiment
- (2018) Grace X. Gu et al. Materials Horizons
- X-Ray Microcomputed Tomography in Additive Manufacturing: A Review of the Current Technology and Applications
- (2018) Anton du Plessis et al. 3D Printing and Additive Manufacturing
- From microstructural design to surface engineering: A tailored approach for improving fatigue life of additively manufactured meta-biomaterials
- (2018) S.M. Ahmadi et al. Acta Biomaterialia
- Notch fatigue and crack growth resistance of Ti-6Al-4V ELI additively manufactured via selective laser melting: A critical distance approach to defect sensitivity
- (2018) M. Benedetti et al. INTERNATIONAL JOURNAL OF FATIGUE
- A deep neural network for classification of melt-pool images in metal additive manufacturing
- (2018) Ohyung Kwon et al. JOURNAL OF INTELLIGENT MANUFACTURING
- Data-driven evaluation of fatigue performance of additive manufactured parts using miniature specimens
- (2018) H.Y. Wan et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Effect of Unit Cell Type and Pore Size on Porosity and Mechanical Behavior of Additively Manufactured Ti6Al4V Scaffolds
- (2018) Haizum Zaharin et al. Materials
- Improved Mechanical Properties and Energy Absorption of BCC Lattice Structures with Triply Periodic Minimal Surfaces Fabricated by SLM
- (2018) Miao Zhao et al. Materials
- Study of Size Effect on Microstructure and Mechanical Properties of AlSi10Mg Samples Made by Selective Laser Melting
- (2018) Zhichao Dong et al. Materials
- Mechanical performance of additively manufactured meta-biomaterials
- (2018) Amir A. Zadpoor Acta Biomaterialia
- State of the art of corner point singularities under in-plane and out-of-plane loading
- (2017) Les P. Pook et al. ENGINEERING FRACTURE MECHANICS
- Data-driven computing in dynamics
- (2017) T. Kirchdoerfer et al. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- Common defects and contributing parameters in powder bed fusion AM process and their classification for online monitoring and control: a review
- (2017) Ehsan Malekipour et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Generalized probabilistic model allowing for various fatigue damage variables
- (2017) José Correia et al. INTERNATIONAL JOURNAL OF FATIGUE
- Additive manufacturing of fatigue resistant materials: Challenges and opportunities
- (2017) Aref Yadollahi et al. INTERNATIONAL JOURNAL OF FATIGUE
- Mechanical properties of open-cell rhombic dodecahedron titanium alloy lattice structure manufactured using electron beam melting under dynamic loading
- (2017) Lijun Xiao et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Orthotropic elastic constants of 2D cellular structures with variously arranged square cells: The effect of filleted wall junctions
- (2017) M. Dallago et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Effect of Build Angle on Surface Properties of Nickel Superalloys Processed by Selective Laser Melting
- (2017) Ernesto E. Covarrubias et al. JOM
- Qualification of Ti6Al4V ELI Alloy Produced by Laser Powder Bed Fusion for Biomedical Applications
- (2017) I. Yadroitsev et al. JOM
- A Survey of Modeling of Lattice Structures Fabricated by Additive Manufacturing
- (2017) Guoying Dong et al. JOURNAL OF MECHANICAL DESIGN
- Fatigue behaviour of NiTi shape memory alloy scaffolds produced by SLM, a unit cell design comparison
- (2017) M. Speirs et al. Journal of the Mechanical Behavior of Biomedical Materials
- Effects of applied stress ratio on the fatigue behavior of additively manufactured porous biomaterials under compressive loading
- (2017) Joep de Krijger et al. Journal of the Mechanical Behavior of Biomedical Materials
- Compensation strategy to reduce geometry and mechanics mismatches in porous biomaterials built with Selective Laser Melting
- (2017) Zahra S. Bagheri et al. Journal of the Mechanical Behavior of Biomedical Materials
- The effect of post-sintering treatments on the fatigue and biological behavior of Ti-6Al-4V ELI parts made by selective laser melting
- (2017) M. Benedetti et al. Journal of the Mechanical Behavior of Biomedical Materials
- How does tissue regeneration influence the mechanical behavior of additively manufactured porous biomaterials?
- (2017) R. Hedayati et al. Journal of the Mechanical Behavior of Biomedical Materials
- Elastic and failure response of imperfect three-dimensional metallic lattices: the role of geometric defects induced by Selective Laser Melting
- (2017) Lu Liu et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Metallic powder-bed based 3D printing of cellular scaffolds for orthopaedic implants: A state-of-the-art review on manufacturing, topological design, mechanical properties and biocompatibility
- (2017) X.P. Tan et al. Materials Science & Engineering C-Materials for Biological Applications
- Fatigue strength of blunt V-notched specimens produced by selective laser melting of Ti-6Al-4V
- (2017) S.M.J. Razavi et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Auxetic mechanical metamaterials
- (2017) H. M. A. Kolken et al. RSC Advances
- Fatigue Assessment of Ti–6Al–4V Circular Notched Specimens Produced by Selective Laser Melting
- (2017) Seyed-Mohammad-Javad Razavi et al. Metals
- Improved fatigue endurance ratio of additive manufactured Ti-6Al-4V lattice by hot isostatic pressing
- (2017) Ming-Wei Wu et al. MATERIALS & DESIGN
- Qualification of AM parts: Extreme value statistics applied to tomographic measurements
- (2017) S. Romano et al. MATERIALS & DESIGN
- The influence of laser parameters and scanning strategies on the mechanical properties of a stochastic porous material
- (2017) Shaaz Ghouse et al. MATERIALS & DESIGN
- Influence of load orientation and of types of loads on the mechanical properties of porous Ti6Al4V biomaterials
- (2017) A. Cuadrado et al. MATERIALS & DESIGN
- High-strength porous biomaterials for bone replacement: A strategy to assess the interplay between cell morphology, mechanical properties, bone ingrowth and manufacturing constraints
- (2016) Sajad Arabnejad et al. Acta Biomaterialia
- Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
- (2016) Xiaojian Wang et al. BIOMATERIALS
- Data-driven computational mechanics
- (2016) T. Kirchdoerfer et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials
- (2016) R. Hedayati et al. INTERNATIONAL JOURNAL OF FATIGUE
- The tensile ductility of cellular Solids: The role of imperfections
- (2016) William Ronan et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Additive Manufacturing of High-Entropy Alloys by Laser Processing
- (2016) V. Ocelík et al. JOM
- Evaluation of genetic programming-based models for simulating bead dimensions in wire and arc additive manufacturing
- (2016) Biranchi Panda et al. JOURNAL OF INTELLIGENT MANUFACTURING
- Fully porous 3D printed titanium femoral stem to reduce stress-shielding following total hip arthroplasty
- (2016) Sajad Arabnejad et al. JOURNAL OF ORTHOPAEDIC RESEARCH
- The influence of cell morphology on the compressive fatigue behavior of Ti-6Al-4V meshes fabricated by electron beam melting
- (2016) S. Zhao et al. Journal of the Mechanical Behavior of Biomedical Materials
- Additive manufacturing and mechanical characterization of graded porosity scaffolds designed based on triply periodic minimal surface architectures
- (2016) M. Afshar et al. Journal of the Mechanical Behavior of Biomedical Materials
- Fatigue behavior of highly porous titanium produced by powder metallurgy with temporary space holders
- (2016) Sedat Özbilen et al. Materials Science & Engineering C-Materials for Biological Applications
- Numerical simulation of the fatigue behavior of additive manufactured titanium porous lattice structures
- (2016) A. Zargarian et al. Materials Science & Engineering C-Materials for Biological Applications
- Mechanical behavior of additive manufactured, powder-bed laser-fused materials
- (2016) Todd M. Mower et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
- (2016) Zhiming Li et al. NATURE
- Surface texture metrology for metal additive manufacturing: a review
- (2016) A. Townsend et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- A Review on Fatigue Life Prediction Methods for Metals
- (2016) E. Santecchia et al. Advances in Materials Science and Engineering
- Fatigue behavior of IN718 microtrusses produced via additive manufacturing
- (2016) Lena Huynh et al. MATERIALS & DESIGN
- Spatial and geometrical-based characterization of microstructure and microhardness for an electron beam melted Ti–6Al–4V component
- (2016) Pan Wang et al. MATERIALS & DESIGN
- Selective laser melting (SLM) of AlSi12Mg lattice structures
- (2016) Martin Leary et al. MATERIALS & DESIGN
- Mechanical Properties of a New Type of Architected Interpenetrating Phase Composite Materials
- (2016) Oraib Al-Ketan et al. Advanced Materials Technologies
- Revealing martensitic transformation and α/β interface evolution in electron beam melting three-dimensional-printed Ti-6Al-4V
- (2016) Xipeng Tan et al. Scientific Reports
- Additive Manufacturing of 17-4 PH Stainless Steel: Post-processing Heat Treatment to Achieve Uniform Reproducible Microstructure
- (2015) Sudha Cheruvathur et al. JOM
- An experimental and simulation study on build thickness dependent microstructure for electron beam melted Ti–6Al–4V
- (2015) Xipeng Tan et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Build orientation optimization for multi-part production in additive manufacturing
- (2015) Yicha Zhang et al. JOURNAL OF INTELLIGENT MANUFACTURING
- Design guidelines for laser additive manufacturing of lightweight structures in TiAl6V4
- (2015) J. Kranz et al. JOURNAL OF LASER APPLICATIONS
- Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting
- (2015) Galina Kasperovich et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Fatigue of Nitinol: The state-of-the-art and ongoing challenges
- (2015) M.J. Mahtabi et al. Journal of the Mechanical Behavior of Biomedical Materials
- Relationship between unit cell type and porosity and the fatigue behavior of selective laser melted meta-biomaterials
- (2015) S. Amin Yavari et al. Journal of the Mechanical Behavior of Biomedical Materials
- Ti–6Al–4V triply periodic minimal surface structures for bone implants fabricated via selective laser melting
- (2015) Chunze Yan et al. Journal of the Mechanical Behavior of Biomedical Materials
- Failure mechanisms of additively manufactured porous biomaterials: Effects of porosity and type of unit cell
- (2015) J. Kadkhodapour et al. Journal of the Mechanical Behavior of Biomedical Materials
- Local strain energy density to predict mode II brittle fracture in Brazilian disk specimens weakened by V-notches with end holes
- (2015) A.R. Torabi et al. MATERIALS & DESIGN
- Structural characterization of biomedical Co–Cr–Mo components produced by direct metal laser sintering
- (2015) G. Barucca et al. Materials Science & Engineering C-Materials for Biological Applications
- Revival of pure titanium for dynamically loaded porous implants using additive manufacturing
- (2015) Ruben Wauthle et al. Materials Science & Engineering C-Materials for Biological Applications
- Influence of processing conditions on strut structure and compressive properties of cellular lattice structures fabricated by selective laser melting
- (2015) Chunlei Qiu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Machine learning applications in genetics and genomics
- (2015) Maxwell W. Libbrecht et al. NATURE REVIEWS GENETICS
- A generalized strain energy density criterion for mixed mode fracture analysis in brittle and quasi-brittle materials
- (2015) M.R. Ayatollahi et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi
- (2015) ZiJiao Zhang et al. Nature Communications
- Additively Manufactured Open-Cell Porous Biomaterials Made from Six Different Space-Filling Unit Cells: The Mechanical and Morphological Properties
- (2015) Seyed Ahmadi et al. Materials
- Influence of cell shape on mechanical properties of Ti–6Al–4V meshes fabricated by electron beam melting method
- (2014) S.J. Li et al. Acta Biomaterialia
- Numerical investigation on mechanical properties of cellular lattice structures fabricated by fused deposition modeling
- (2014) M.R. Karamooz Ravari et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- On the fatigue properties of metals manufactured by selective laser melting – The role of ductility
- (2014) Stefan Leuders et al. JOURNAL OF MATERIALS RESEARCH
- Mechanical behavior of regular open-cell porous biomaterials made of diamond lattice unit cells
- (2014) S.M. Ahmadi et al. Journal of the Mechanical Behavior of Biomedical Materials
- Design optimization of supports for overhanging structures in aluminum and titanium alloys by selective laser melting
- (2014) F. Calignano MATERIALS & DESIGN
- High temperature fatigue tests of un-notched and notched specimens made of 40CrMoV13.9 steel
- (2014) Filippo Berto et al. MATERIALS & DESIGN
- Lattice Structures Manufactured by SLM: On the Effect of Geometrical Dimensions on Microstructure Evolution During Processing
- (2014) Thomas Niendorf et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Manufacturing and Characterization of Ti6Al4V Lattice Components Manufactured by Selective Laser Melting
- (2014) Sabina Campanelli et al. Materials
- Mechanical properties of lattice materials via asymptotic homogenization and comparison with alternative homogenization methods
- (2013) Sajad Arabnejad et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Fatigue behavior of thin-walled grade 2 titanium samples processed by selective laser melting. Application to life prediction of porous titanium implants
- (2013) P. Lipinski et al. Journal of the Mechanical Behavior of Biomedical Materials
- Fatigue design of a mechanically biocompatible lattice for a proof-of-concept femoral stem
- (2013) Sajad Arabnejad Khanoki et al. Journal of the Mechanical Behavior of Biomedical Materials
- Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing
- (2013) G. Campoli et al. MATERIALS & DESIGN
- Advanced lightweight 316L stainless steel cellular lattice structures fabricated via selective laser melting
- (2013) Chunze Yan et al. MATERIALS & DESIGN
- Fatigue behavior of porous biomaterials manufactured using selective laser melting
- (2013) S. Amin Yavari et al. Materials Science & Engineering C-Materials for Biological Applications
- Recent developments in brittle and quasi-brittle failure assessment of engineering materials by means of local approaches
- (2013) F. Berto et al. MATERIALS SCIENCE & ENGINEERING R-REPORTS
- Static mechanical behaviours of stainless steel micro-lattice structures under different loading conditions
- (2013) Recep Gümrük et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Surface Roughness and Morphology Customization of Additive Manufactured Open Porous Ti6Al4V Structures
- (2013) Grzegorz Pyka et al. Materials
- High-Resolution Microfocus X-Ray Computed Tomography for 3D Surface Roughness Measurements of Additive Manufactured Porous Materials
- (2012) Greet Kerckhofs et al. ADVANCED ENGINEERING MATERIALS
- Stiffness and strength of tridimensional periodic lattices
- (2012) Andrea Vigliotti et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Research on the fabricating quality optimization of the overhanging surface in SLM process
- (2012) Di Wang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Fatigue design of lattice materials via computational mechanics: Application to lattices with smooth transitions in cell geometry
- (2012) Ehsan Masoumi Khalil Abad et al. INTERNATIONAL JOURNAL OF FATIGUE
- On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance
- (2012) S. Leuders et al. INTERNATIONAL JOURNAL OF FATIGUE
- Finite element modelling of the compressive response of lattice structures manufactured using the selective laser melting technique
- (2012) M. Smith et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Compression deformation behavior of Ti–6Al–4V alloy with cellular structures fabricated by electron beam melting
- (2012) X.Y. Cheng et al. Journal of the Mechanical Behavior of Biomedical Materials
- Compression fatigue behavior of Ti–6Al–4V mesh arrays fabricated by electron beam melting
- (2011) S.J. Li et al. ACTA MATERIALIA
- Multiparametric full-field representations of the in-plane stress fields ahead of cracked components under mixed mode loading
- (2011) F. Berto et al. INTERNATIONAL JOURNAL OF FATIGUE
- Compression-compression fatigue of selective electron beam melted cellular titanium (Ti-6Al-4V)
- (2011) Nikolas W. Hrabe et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Finite element analysis of the mechanical properties of cellular aluminium based on micro-computed tomography
- (2011) C. Veyhl et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Micro-CT-based improvement of geometrical and mechanical controllability of selective laser melted Ti6Al4V porous structures
- (2011) S. Van Bael et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- On higher order terms and out-of-plane singular mode
- (2011) F. Berto et al. MECHANICS OF MATERIALS
- As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting
- (2011) T. Vilaro et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructural size effects on mechanical properties of high purity nickel
- (2010) C. Keller et al. INTERNATIONAL JOURNAL OF PLASTICITY
- The Influence of Processing Parameters on the Mechanical Properties of Selectively Laser Melted Stainless Steel Microlattice Structures
- (2010) S. Tsopanos et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Fracture assessment of U-notches under three point bending by means of local energy density
- (2010) F. Berto et al. MATERIALS & DESIGN
- Strong crystal size effect on deformation twinning
- (2010) Qian Yu et al. NATURE
- Next-generation biomedical implants using additive manufacturing of complex, cellular and functional mesh arrays
- (2010) L. E. Murr et al. PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES
- Ductility of a Ti‐6Al‐4V alloy produced by selective laser melting of prealloyed powders
- (2010) Luca Facchini et al. RAPID PROTOTYPING JOURNAL
- Selective laser melting: A unit cell approach for the manufacture of porous, titanium, bone in-growth constructs, suitable for orthopedic applications. II. Randomized structures
- (2009) Lewis Mullen et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Effect of the oxygen content in solution on the static and cyclic deformation of titanium foams
- (2009) L. P. Lefebvre et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM)
- (2009) Jayanthi Parthasarathy et al. Journal of the Mechanical Behavior of Biomedical Materials
- A review of the volume-based strain energy density approach applied to V-notches and welded structures
- (2009) F. Berto et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Mechanical response of cellular solids: Role of cellular topology and microstructural irregularity
- (2008) M. Alkhader et al. INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE
- Microstructure and mechanical behavior of Ti–6Al–4V produced by rapid-layer manufacturing, for biomedical applications
- (2008) L.E. Murr et al. Journal of the Mechanical Behavior of Biomedical Materials
- Investigation of the fatigue behavior of open cell foams by a micromechanical 3-D model
- (2008) Serkan Demiray et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreDiscover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversation