Progress of porous Al-containing intermetallics fabricated by combustion synthesis reactions: a review

Visible Observation and Formation Mechanism of Porous TiAl3 Intermetallics During the Continuous Sintering Process

(2020) Xinyang Jiao et al.   JOM

Rapid Preparation of Porous Ni–Al Intermetallics by Thermal Explosion

(2019) Zhoujun Li et al.   COMBUSTION SCIENCE AND TECHNOLOGY

Porous NbAl3/TiAl3 intermetallic composites with controllable porosity and pore morphology prepared by two-step thermal explosion

(2019) Xiaoping Cai et al.   Journal of Materials Research and Technology-JMR&T

Microstructure and oxidation resistance of porous NbAl3 intermetallic prepared by thermal explosion reaction

(2019) Xiaoping Cai et al.   MATERIALS SCIENCE AND TECHNOLOGY

Rapid reactive synthesis of TiAl3 intermetallics by thermal explosion and its oxidation resistance at high temperature

(2019) Xinyang Jiao et al.   Progress in Natural Science-Materials International

Exothermic behavior and thermodynamic analysis for the formation of porous TiAl3 intermetallics sintering with different heating rates

(2019) Xinyang Jiao et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Porous TiAl 3 intermetallics with symmetrical graded pore-structure fabricated by leaching space holder and thermal explosion process

(2018) Xinyang Jiao et al.   INTERMETALLICS

Review of porous intermetallic compounds by reactive synthesis of elemental powders

(2018) Yao Jiang et al.   INTERMETALLICS

Fabrication of Highly Porous CuAl Intermetallic by Thermal Explosion Using NaCl Space Holder

(2018) Xiaoping Cai et al.   JOM

Suppression of the SHS reactions during synthesis of porous FeAl intermetallics by introducing silicon

(2018) Huibin Zhang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Fe-Al intermetallic foam with porosity above 60 % prepared by thermal explosion

(2018) Xiaoping Cai et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Modification of the reactive synthesis of porous FeAl with addition of Si

(2018) Haiyan Gao et al.   MATERIALS AT HIGH TEMPERATURES

Microstructure and properties of Al-Cr porous intermetallics fabricated by thermal explosion reaction

(2018) Xueqin Kang et al.   MATERIALS LETTERS

Oxidation Resistance of Highly Porous Fe-Al Foams Prepared by Thermal Explosion

(2018) Xiaoping Cai et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Fabrication of porous FeAl-based intermetallics via thermal explosion

(2018) Ya-nan LIU et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

A novel fabrication strategy for highly porous FeAl/Al 2 O 3 composite by thermal explosion in vacuum

(2018) Yanan Liu et al.   VACUUM

Fabrication of FeAl Intermetallic Foams by Tartaric Acid-Assisted Self-Propagating High-Temperature Synthesis

(2018) Krzysztof Karczewski et al.   Materials

Fabrication of highly porous TiAl3 intermetallics using titanium hydride as a reactant in the thermal explosion reaction

(2018) Xinyang Jiao et al.   JOURNAL OF MATERIALS RESEARCH

Combustion synthesis: An effective tool for preparing inorganic materials

(2018) Guanghua Liu et al.   SCRIPTA MATERIALIA

Fabrication of porous NiAl intermetallic compounds with a hierarchical open-cell structure by combustion synthesis reaction and space holder method

(2018) Yunmao Shu et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Influences of sintering parameters on shape-retention ability of porous Ni3Al intermetallic fabricated by powder metallurgy

(2018) Heng Jiang et al.   INTERMETALLICS

Effect of Cr and Nb on the phase transformation and pore formation of Ti-Al base alloys

(2017) Saif Haider Kayani et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Combustion synthesis and characterization of porous Ni-Al materials for metal-supported solid oxide fuel cells application

(2017) Anatoly Maznoy et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure and tribological behavior of NiAl/WC composites fabricated by thermal explosion reaction at 800 °C

(2017) Jianjun Yuan et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Compressive properties of porous Ti–Al alloys fabricated by reaction synthesis using a space holder powder

(2017) Naoki Takata et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure Evolution and Pore Formation Mechanism of Porous TiAl3 Intermetallics via Reactive Sintering

(2017) Xinyang Jiao et al.   Acta Metallurgica Sinica-English Letters

Highly porous open cellular TiAl-based intermetallics fabricated by thermal explosion with space holder process

(2016) Zhang Wang et al.   INTERMETALLICS

Effects of cold compacting pressure on the expansion behavior of Ti-48Al during sintering

(2016) Shulong Ye et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microwave ignition of the combustion synthesis of aluminides and field-related effects

(2016) Roberto Rosa et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Porous TiAl alloys fabricated by sintering of TiH 2 and Al powder mixtures

(2016) Qin Peng et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Use of TiH2 as a reactant in combustion synthesis of porous Ti5Si3 and Ti5Si3/TiAl intermetallics

(2016) C.L. Yeh et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of heating rate on porous TiAl-based intermetallics synthesized by thermal explosion

(2016) Xinyang Jiao et al.   MATERIALS AND MANUFACTURING PROCESSES

Highly-porous FeAl intermetallic foams formed via sintering with Eosin Y as a gas releasing agent

(2016) Krzysztof Karczewski et al.   MATERIALS LETTERS

Preparation of hierarchical porous metallic materials via deposition of microporous particles

(2016) Biao Chen et al.   MATERIALS LETTERS

Crystalline oxalic acid aided FeAl intermetallic alloy sintering. Fabrication of intermetallic foam with porosity above 45%

(2016) Krzysztof Karczewski et al.   MATERIALS LETTERS

Hierarchical porous TiAl3 intermetallics synthesized by thermal explosion with a leachable space-holder material

(2016) Xinyang Jiao et al.   MATERIALS LETTERS

Effect of pore structure on mechanical properties of porous TiAl

(2016) G. L. Hao et al.   MATERIALS SCIENCE AND TECHNOLOGY

Advanced Image Analysis of the Surface Pattern Emerging in Ni3Al Intermetallic Alloys on Anodization

(2016) Marco Salerno et al.   Frontiers in Materials

Effect of pressure on pore structure of porous FeAl intermetallics

(2015) H.Y. Gao et al.   ADVANCED POWDER TECHNOLOGY

Inorganic microporous membranes for H2 and CO2 separation—Review of experimental and modeling progress

(2015) H. Li et al.   CHEMICAL ENGINEERING SCIENCE

Biomedical Applications of Anodic Porous Alumina

(2015) Chiara Toccafondi et al.   Current Nanoscience

A study on the formation of iron aluminide (FeAl) from elemental powders

(2015) H. Sina et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Studies on the formation of aluminides in heated Nb–Al powder mixtures

(2015) H. Sina et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Porous Ti3SiC2 fabricated by mixed elemental powders reactive synthesis

(2015) Xinli Liu et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Reactive synthesis and characterization of titanium aluminides produced from elemental powder mixtures

(2015) H. Sina et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Rapid synthesis of Ti 2 AlN ceramic via thermal explosion

(2015) Yi Liu et al.   MATERIALS LETTERS

Novel double pore structures of TiAl produced by powder metallurgy processing

(2015) Gangling Hao et al.   MATERIALS LETTERS

Porous graded FeAl intermetallic foams fabricated by sintering process using NaCl space holders

(2015) Magda Łazińska et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

In situ foam-gelcasting fabrication and properties of highly porous γ-Y2Si2O7 ceramic with multiple pore structures

(2015) Zhen Wu et al.   SCRIPTA MATERIALIA

Synthesis, microstructure and properties of Ti–Al porous intermetallic compounds prepared by a thermal explosion reaction

(2015) Quanlin Shi et al.   RSC Advances

Phase transformation in Ti–48Al–6Nb porous alloys and its influence on pore properties

(2015) Fan Wang et al.   MATERIALS & DESIGN

Fabrication of TiAl intermetallic phases by heat treatment of warm sprayed metal precursors

(2014) Judyta Sienkiewicz et al.   INTERMETALLICS

Microstructure and properties of Ti5Si3-based porous intermetallic compounds fabricated via combustion synthesis

(2014) Huashen Ran et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Mechanical properties of porous Fe–Al intermetallics

(2014) H. Y. Gao et al.   POWDER METALLURGY

Effects of the Al content on pore structures of porous Ti3AlC2 ceramics by reactive synthesis

(2013) Junsheng Yang et al.   CERAMICS INTERNATIONAL

Hierarchical open cellular porous TiAl manufactured by space holder process

(2013) Makoto Kobashi et al.   INTERMETALLICS

Reaction behavior and pore formation mechanism of TiAl–Nb porous alloys prepared by elemental powder metallurgy

(2013) Yongfeng Liang et al.   INTERMETALLICS

Preparation and Pore Structure Stability at High Temperature of Porous Fe-Al Intermetallics

(2013) P. Z. Shen et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Pore structure control for porous FeAl intermetallics

(2012) Haiyan Gao et al.   INTERMETALLICS

Combustion synthesis of Cr–Al and Cr–Si intermetallics with Al2O3 additions from Cr2O3–Al and Cr2O3–Al–Si reaction systems

(2012) C.L. Yeh et al.   INTERMETALLICS

Pore evolution regulation in synthesis of open pore structured Ti–Al intermetallic compounds by solid diffusion

(2012) M.R. Chen et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Combustion synthesis of (Mo1−xCrx)Si2 (x=0.00–0.30) alloys in SHS mode

(2011) Peizhong Feng et al.   ADVANCED POWDER TECHNOLOGY

Effect of aluminium evaporation loss on pore characteristics of porous FeAl alloys produced by vacuum sintering

(2011) Gang Chen et al.   JOURNAL OF MATERIALS SCIENCE

The diversity of combustion synthesis processing: a review

(2011) K. Morsi   JOURNAL OF MATERIALS SCIENCE

Unique microstructure of porous NiAl intermetallic compound prepared by combustion synthesis

(2011) Hongzhi Cui et al.   JOURNAL OF POROUS MATERIALS

Effect of Al content on porous Ni–Al alloys

(2011) H.X. Dong et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

As-cast microstructure and Sr-containing phases of AZ31 magnesium alloys with high Sr contents

(2011) Lu WU et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Open-celled porous NiAl intermetallics prepared by replication of carbamide space-holders

(2011) Jie WU et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

A study on the combustion synthesis of titanium aluminide in the self-propagating mode

(2010) M. Adeli et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Oxidation behavior of porous NiAl prepared through reactive synthesis

(2010) H.X. Dong et al.   MATERIALS CHEMISTRY AND PHYSICS

Porous FeAl intermetallics fabricated by elemental powder reactive synthesis

(2009) Haiyan Gao et al.   INTERMETALLICS

Effects of sample stoichiometry of thermite-based SHS reactions on formation of Nb–Al intermetallics

(2009) C.L. Yeh et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Formation of porous Ni–Al intermetallics through pressureless reaction synthesis

(2009) H.X. Dong et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Pore structures and thermal insulating properties of high Nb containing TiAl porous alloys

(2009) Y.H. Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effects of Al content on porous Fe–Al alloys

(2009) H. Y. Gao et al.   POWDER METALLURGY

A study on NiAl produced by pressure-assisted combustion synthesis

(2009) O. Ozdemir et al.   VACUUM

Effects of the Al content on pore structures of porous Ti–Al alloys

(2008) Y. Jiang et al.   INTERMETALLICS

Microstructural evolution during the ignition/quenching of pre-heated Ti/3Al powders

(2008) H.Q. Che et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Space-holder engineered porous NiTi shape memory alloys with improved pore characteristics and mechanical properties

(2008) D.S. Li et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Reactive synthesis of microporous titanium-aluminide membranes

(2008) Yao Jiang et al.   MATERIALS LETTERS

Effect of heating rate on pore structure of porous FeAl material

(2008) H. Y. Gao et al.   POWDER METALLURGY