Modification of the reactive synthesis of porous FeAl with addition of Si

Direct separation of arsenic and antimony oxides by high-temperature filtration with porous FeAl intermetallic

(2017) Huibin Zhang et al.   JOURNAL OF HAZARDOUS MATERIALS

A Comparative Study on SiC-B4C-Si Cermet Prepared by Pressureless Sintering and Spark Plasma Sintering Methods

(2016) P. Sahani et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Effect of Si on the growth of Fe-Al intermetallic layer in Zn-11%Al-3%Mg coating

(2016) Kailiang Li et al.   SURFACE & COATINGS TECHNOLOGY

Effect of silicon on the reaction between solid iron and liquid Zn-22.3 wt.% Al bath

(2016) Dasheng Wei et al.   SURFACE & COATINGS TECHNOLOGY

A study on the formation of iron aluminide (FeAl) from elemental powders

(2015) H. Sina et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Kinetics study on the SHS reaction in massive samples with high heating rate in the Fe–Al system

(2015) Dariusz Siemiaszko et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Hot gas filtration – A review

(2012) Steffen Heidenreich   FUEL

On the formation of intermetallics in Fe–Al system – An in situ XRD study

(2012) Pavel Novák et al.   INTERMETALLICS

Modification of Fe and Al elemental powders’ sintering with addition of magnesium and magnesium hydride

(2011) Michał Chojnacki et al.   INTERMETALLICS

The influence of different additives on the kinetics of self-propagating high-temperature synthesis during the sintering process of Fe and Al elemental powders

(2010) Krzysztof Karczewski et al.   INTERMETALLICS

Intermediary phases formation in Fe–Al–Si alloys during reactive sintering

(2010) Pavel Novák et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Porous FeAl intermetallics fabricated by elemental powder reactive synthesis

(2009) Haiyan Gao et al.   INTERMETALLICS

Effect of reactive sintering conditions on microstructure of Fe–Al–Si alloys

(2009) Pavel Novák et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of preheating treatment at 575°C of green compacts on porous NiAl

(2009) H.X. Dong et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Synthesis of Fe–Al–Si intermediary phases by reactive sintering

(2009) P Novák et al.   POWDER METALLURGY

A thermodynamic description of the Al–Fe–Si system over the whole composition and temperature ranges via a hybrid approach of CALPHAD and key experiments

(2008) Yong Du et al.   INTERMETALLICS

Preparation of Ti–Al–Si alloys by reactive sintering

(2008) Pavel Novák et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of heating rate on pore structure of porous FeAl material

(2008) H. Y. Gao et al.   POWDER METALLURGY

Role of silicon in solidification microstructure in hot-dipped 55wt% Al–Zn–Si coatings

(2007) Baojiang Xu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING