Effect of silica fume on the mechanical property and hydration characteristic of alkali-activated municipal solid waste incinerator (MSWI) fly ash

Interpreting the early-age reaction process of alkali-activated slag by using combined embedded ultrasonic measurement, thermal analysis, XRD, FTIR and SEM

(2020) Ruilin Cao et al.   COMPOSITES PART B-ENGINEERING

Mechanism of calcination modification of phosphogypsum and its effect on the hydration properties of phosphogypsum-based supersulfated cement

(2020) Shuhua Liu et al.   CONSTRUCTION AND BUILDING MATERIALS

Effects of Aluminum Dosage on Gel Formation and Heavy Metal Immobilization in Alkali-Activated Municipal Solid Waste Incineration Fly Ash

(2020) Xiang Tian et al.   ENERGY & FUELS

Shrinkage behaviour, early hydration and hardened properties of sodium silicate activated slag incorporated with gypsum and cement

(2020) Jun Liu et al.   CONSTRUCTION AND BUILDING MATERIALS

Utilisation of municipal solid waste incinerator (MSWI) fly ash with metakaolin for preparation of alkali-activated cementitious material

(2020) Jun Liu et al.   JOURNAL OF HAZARDOUS MATERIALS

Understanding the roles of activators towards setting and hardening control of alkali-activated slag cement

(2019) Ning Li et al.   COMPOSITES PART B-ENGINEERING

Formation of Friedel’s salt using steel slag and potash mine brine water

(2019) Xue Wang et al.   CONSTRUCTION AND BUILDING MATERIALS

Degradation technologies and mechanisms of dioxins in municipal solid waste incineration fly ash: A review

(2019) Junjie Zhang et al.   JOURNAL OF CLEANER PRODUCTION

Effects of aluminum on the expansion and microstructure of alkali-activated MSWI fly ash-based pastes

(2019) Xiang Tian et al.   CHEMOSPHERE

Pretreatment of municipal solid waste incineration fly ash and preparation of solid waste source sulphoaluminate cementitious material

(2019) Yanpeng Mao et al.   JOURNAL OF HAZARDOUS MATERIALS

Effect of the Sodium Silicate Modulus and Slag Content on Fresh and Hardened Properties of Alkali-Activated Fly Ash/Slag

(2019) Xiaowei Ouyang et al.   Minerals

Immobilization mechanism of Se oxyanions in geopolymer: Effects of alkaline activators and calcined hydrotalcite additive

(2019) Quanzhi Tian et al.   JOURNAL OF HAZARDOUS MATERIALS

Magnetite enhances anaerobic digestion and methanogenesis of fresh leachate from a municipal solid waste incineration plant

(2018) Yuqing Lei et al.   CHEMICAL ENGINEERING JOURNAL

Effect of alkali activator concentration and curing condition on strength and microstructure of waste clay brick powder-based geopolymer

(2018) Murat Tuyan et al.   COMPOSITES PART B-ENGINEERING

Utilization of municipal solid waste incineration bottom ash in autoclaved aerated concrete

(2018) XiangGuo Li et al.   CONSTRUCTION AND BUILDING MATERIALS

Preparation of red mud-based geopolymer materials from MSWI fly ash and red mud by mechanical activation

(2018) Yuancheng Li et al.   WASTE MANAGEMENT

Co-disposal of MSWI fly ash and electrolytic manganese residue based on geopolymeric system

(2018) Xinyuan Zhan et al.   WASTE MANAGEMENT

Characterization and application of municipal solid waste incineration (MSWI) bottom ash and waste granite powder in alkali activated slag

(2017) X. Gao et al.   JOURNAL OF CLEANER PRODUCTION

Sustainable alkali activated materials: Precursor and activator derived from industrial wastes

(2017) Ana Fernández-Jiménez et al.   JOURNAL OF CLEANER PRODUCTION

Immobilization potential of Cr(VI) in sodium hydroxide activated slag pastes

(2017) Mingtao Zhang et al.   JOURNAL OF HAZARDOUS MATERIALS

Wide-scale utilization of MSWI fly ashes in cement production and its impact on average heavy metal contents in cements: The case of Austria

(2017) Jakob Lederer et al.   WASTE MANAGEMENT

Influence of the Ca/Si ratio on the compressive strength of cementitious calcium–silicate–hydrate binders

(2017) Wolfgang Kunther et al.   Journal of Materials Chemistry A

Effect of elevated temperature on alkali-activated geopolymeric binders compared to portland cement-based binders

(2016) O.G. Rivera et al.   CEMENT AND CONCRETE RESEARCH

Hydration and microstructures of concrete containing raw or densified silica fume at different curing temperatures

(2016) Zengqi Zhang et al.   CONSTRUCTION AND BUILDING MATERIALS

Technology, cost, a performance of waste-to-energy incineration industry in China

(2016) Zhao Xin-gang et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Recycling of MSWI Bottom Ash: A Review of Chemical Barriers, Engineering Applications and Treatment Technologies

(2016) Bram Verbinnen et al.   Waste and Biomass Valorization

Impact of chloride-rich environments on cement paste mineralogy

(2015) Isabel Galan et al.   CEMENT AND CONCRETE RESEARCH

Cooperative urban mining in Brazil: Collective practices in selective household waste collection and recycling

(2015) J. Gutberlet   WASTE MANAGEMENT

Immobilization of trace elements in municipal solid waste incinerator (MSWI) fly ash by producing calcium sulphoaluminate cement after carbonation and washing

(2015) Lei Wang et al.   WASTE MANAGEMENT & RESEARCH

Effect of activator type and content on properties of alkali-activated slag mortars

(2013) Serdar Aydın et al.   COMPOSITES PART B-ENGINEERING

Utilization of municipal solid waste incineration bottom ash in blended cement

(2012) Xiang-Guo Li et al.   JOURNAL OF CLEANER PRODUCTION

Effect of MSWI fly ash and incineration residues on cement performances

(2010) Xiangguo Li et al.   JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION

Immobilization of MSWI fly ash through geopolymerization: Effects of water-wash

(2010) Lei Zheng et al.   WASTE MANAGEMENT

Stabilization of chromium-bearing electroplating sludge with MSWI fly ash-based Friedel matrices

(2008) Guangren Qian et al.   JOURNAL OF HAZARDOUS MATERIALS

Leaching behavior of heavy metals from municipal solid wastes incineration (MSWI) fly ash used in concrete

(2008) Hui-Sheng Shi et al.   JOURNAL OF HAZARDOUS MATERIALS

Composite biomaterials from fibre wastes: Characterization of wool–cellulose acetate blends

(2007) A. Aluigi et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING