Selection of optimal processing condition during abrasive wear of in-situ ZA-37/TiCp composites using MCDM technique
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Selection of optimal processing condition during abrasive wear of in-situ ZA-37/TiCp composites using MCDM technique
Authors
Keywords
ZA37 alloys, Microstructure, Wear behavior, Surface roughness, GRA, ANOVA, RSM
Journal
CERAMICS INTERNATIONAL
Volume -, Issue -, Pages -
Publisher
Elsevier BV
Online
2021-04-06
DOI
10.1016/j.ceramint.2021.04.016
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Effect of ZrB2 on microstructural, mechanical and corrosion behaviour of aluminium (AA7178) alloy matrix composite prepared by the stir casting route
- (2021) S. Dinesh Kumar et al. CERAMICS INTERNATIONAL
- Review of Microstructures and Properties of Zinc Alloys
- (2020) Annalisa Pola et al. Metals
- Wear damage tolerance and high temperature oxidation behavior of HfB2:ZrB2–SiC composites
- (2020) Ambreen Nisar et al. CERAMICS INTERNATIONAL
- Characterization of mechanical and tribological properties of graphite and alumina reinforced zinc alloy (ZA-27) hybrid metal matrix composites
- (2020) Swati Gangwar et al. JOURNAL OF COMPOSITE MATERIALS
- Wear Behaviour of ZA27/SiC/Graphite Composites under Lubricated Sliding Conditions
- (2020) Nenad Miloradović et al. Materials
- Dry sliding wear characteristics evaluation and prediction of vacuum casted marble dust (MD) reinforced ZA-27 alloy composites using hybrid improved bat algorithm and ANN
- (2020) Swati Gangwar et al. Materials Today Communications
- Effect of titanium diboride ceramic particles on mechanical and wear behaviour of Cu-10 wt% W alloy composites processed by P/M route
- (2020) B. Stalin et al. VACUUM
- Evaluation of Microstructure, Mechanical, Thermal and Erosive Wear Behavior of Aluminum-Based Composites
- (2019) Mohammad Mohsin Khan et al. Silicon
- Corrosion Investigation of Zinc–Aluminum Alloy (ZA-27) Matrix Reinforced with In Situ Synthesized Titanium Carbide Particle Composites
- (2019) Roshita David et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Wear Behaviour of Al-Silicon (LM13) Alloy Composite Reinforcement with TiC and ZrSiO4 Particles
- (2019) Surendra Kumar Patel et al. Silicon
- Optimization of powder metallurgy parameters to obtain low corrosion rate and high compressive strength in Al-MoO3 composites using SN ratio and ANOVA analysis
- (2019) G T Sudha et al. Materials Research Express
- Optimization of wear parameters using Taguchi grey relational analysis and ANN-TLBO algorithm for silicon nitride filled AA6063 matrix composites
- (2019) B Stalin et al. Materials Research Express
- The slurry abrasive wear behaviour and microstructural analysis of A2024-SiC-ZrSiO 4 metal matrix composite
- (2018) Surendra Kumar Patel et al. CERAMICS INTERNATIONAL
- Processing and characterization of Cd/Ti co-substituted BiFeO3 nanoceramics
- (2018) Nitin Kumar et al. INTERNATIONAL JOURNAL OF MODERN PHYSICS B
- Selection of optimal processing condition during WEDM of compocasted AA6061/cenosphere AMCs based on grey-based hybrid approach
- (2018) A. Dey et al. MATERIALS AND MANUFACTURING PROCESSES
- Effect of Fine TiC Particle Reinforcement on the Dry Sliding Wear Behaviour of In-Situ Synthesized ZA27 Alloy
- (2018) Roshita David et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- Erosive wear properties of ZA-27 alloy-based nanocomposites: Influence of type, amount, and size of nanoparticle reinforcements
- (2018) Aleksandar Vencl et al. Friction
- Mechanical properties of a novel fiber metal laminate based on a carbon fiber reinforced Zn-Al alloy composite
- (2018) Xinwei Hao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Production and anisotropic compressibility of 304 stainless steel fiber/ZA8 zinc alloy interpenetrating phase composites
- (2017) Zhaoyao Zhou et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Wire electrical discharge machining characteristics of AA6061/cenosphere as-cast aluminum matrix composites
- (2017) Abhijit Dey et al. MATERIALS AND MANUFACTURING PROCESSES
- Mechanical and tribological behaviour of tungsten carbide reinforced aluminum LM4 matrix composites
- (2017) S. Arivukkarasan et al. PARTICULATE SCIENCE AND TECHNOLOGY
- Structural, electrical and magnetic properties of (Cd, Ti) modified BiFeO 3
- (2017) Nitin Kumar et al. PHYSICS LETTERS A
- Machinability of cenosphere particulate–reinforced AA6061 aluminium alloy prepared by compocasting
- (2017) Mujibur Rahman et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Optimization of electrical discharge machining process parameters for Al6061/cenosphere composite using grey-based hybrid approach
- (2017) A. DEY et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Mechanical Properties and Dry Sliding Wear Behaviour of Molybdenum Disulphide Reinforced Zinc–Aluminium Alloy Composites
- (2017) Shivakumar Nagavelly et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- Abrasive Wear Characteristics of Silicon Carbide Particle Reinforced Zinc Based Composite
- (2017) Mohammad Mohsin Khan et al. Silicon
- Overview of wear performance of aluminium matrix composites reinforced with ceramic materials under the influence of controllable variables
- (2016) Jaswinder Singh et al. CERAMICS INTERNATIONAL
- Ti3SiC2Reinforced ZA27 Alloy Composites with Enhanced Mechanical Properties
- (2016) Hai-Yan Li et al. International Journal of Applied Ceramic Technology
- Thermal and Microstructure Characterization of Zn-Al-Si Alloys and Chemical Reaction with Cu Substrate During Spreading
- (2016) Katarzyna Berent et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Corrosion investigation of zinc−aluminum alloy matrix (ZA-27) reinforced with alumina (Al2O3) and fly ash
- (2016) Mohammed Almomani et al. PARTICULATE SCIENCE AND TECHNOLOGY
- Corrosion influence on surface appearance and microstructure of compo cast ZA27/SiCp composites in sodium chloride solution
- (2016) Biljana BOBIĆ et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Synthesis and Characterization of Ti3SiC2 Particulate-Reinforced Novel Zn Matrix Composites
- (2015) S. Gupta et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Tribological investigation of Zamak alloys reinforced with alumina (Al2O3) and fly ash
- (2015) Mohammed Almomani et al. PARTICULATE SCIENCE AND TECHNOLOGY
- Microstructure, mechanical properties and wear behaviour of Zn–Al–Cu–TiB2 in situ composites
- (2015) Fei CHEN et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- The effect of silver on wear behaviour of zinc–aluminium-based ZA-12 alloy produced by gravity casting
- (2014) Hüseyin Şevik MATERIALS CHARACTERIZATION
- Fabrication of in situ TiB2 particulates reinforced zinc alloy matrix composite
- (2014) Z.G. Li MATERIALS LETTERS
- Experimental investigation and multi-objective optimization of wire electrical discharge machining (WEDM) of 5083 aluminum alloy
- (2014) G. SELVAKUMAR et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- A study on processing, characterization and erosion wear behavior of silicon carbide particle filled ZA-27 metal matrix composites
- (2013) Srimant Kumar Mishra et al. MATERIALS & DESIGN
- Investigation of tool wear and surface roughness during machining of ZA43–SiCp composite using full factorial approach
- (2013) Rajaneesh N Marigoudar et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Effect of reinforcement percentage on wear behavior of SiCp reinforced ZA43 alloy metal matrix composites
- (2013) Rajaneesh N. Marigoudar et al. SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS
- Damage assessment of titania filled zinc–aluminum alloy metal matrix composites in erosive environment: A comparative study
- (2011) Amar Patnaik et al. MATERIALS & DESIGN
- Effect of abrasive particle size and the influence of microstructure on the wear mechanisms in wear-resistant materials
- (2011) M.R. Thakare et al. WEAR
- Multi-objective optimisation of laser beam cutting process
- (2007) Avanish Kumar Dubey et al. OPTICS AND LASER TECHNOLOGY
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now