Biomimetic Copper Forest Wick Enables High Thermal Conductivity Ultrathin Heat Pipe

Enhanced pool boiling performance of a porous honeycomb copper surface with radial diameter gradient

(2020) Dong-Chuan Mo et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Electrodeposition Patterned Copper Foam with Micro/Nanostructures for Reducing Supercooling in Water-Based Cool Storage Phase-Change Materials

(2020) Mou Xu et al.   Applied Sciences-Basel

A Paper-Like Inorganic Thermal Interface Material Composed of Hierarchically Structured Graphene/Silicon Carbide Nanorods

(2019) Wen Dai et al.   ACS Nano

Experimental investigation of loop heat pipe with a large squared evaporator for multi-heat sources cooling

(2019) Biao Xiao et al.   RENEWABLE ENERGY

Review of applications and developments of ultra-thin micro heat pipes for electronic cooling

(2018) Heng Tang et al.   APPLIED ENERGY

Graphitization of graphene oxide films under pressure

(2018) Xianjue Chen et al.   CARBON

Synergistic effect of graphene and carbon nanotube for high-performance electromagnetic interference shielding films

(2018) Erzhen Zhou et al.   CARBON

Wettability modification to further enhance the pool boiling performance of the micro nano bi-porous copper surface structure

(2018) Ya-Qiao Wang et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Investigation on fabrication and capillary performance of multi-scale composite porous wick made by alloying-dealloying method

(2018) Hui Li et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Tailoring the Thermal and Mechanical Properties of Graphene Film by Structural Engineering

(2018) Nan Wang et al.   Small

Effect of fabrication parameters on capillary pumping performance of multi-scale composite porous wicks for loop heat pipe

(2018) Hui Li et al.   APPLIED THERMAL ENGINEERING

Heat transfer characteristic of an ultra-thin flat plate heat pipe with surface-functional wicks for cooling electronics

(2018) Gong Chen et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Evaluation of capillary performance of a stainless steel fiber–powder composite wick for stainless steel heat pipe

(2018) Shufeng Huang et al.   APPLIED THERMAL ENGINEERING

Polyacrylonitrile coupled graphite oxide film with improved heat dissipation ability

(2018) Ke Wang et al.   CARBON

Characterization of a high performance ultra-thin heat pipe cooling module for mobile hand held electronic devices

(2017) Mohammad Shahed Ahamed et al.   HEAT AND MASS TRANSFER

A novel oxidized composite braided wires wick structure applicable for ultra-thin flattened heat pipes

(2017) Kai-Shing Yang et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Influence of electrochemical deposition parameters on capillary performance of a rectangular grooved wick with a porous layer

(2017) Longsheng Lu et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Fabrication and capillary characterization of micro-grooved wicks with reentrant cavity array

(2017) Jian Zeng et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Recent advances in MEMS-based micro heat pipes

(2017) Jian Qu et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Switchable heat transfer mechanisms of nucleation and convection by wettability match of evaporator and condenser for heat pipes: Nano-structured surface effect

(2017) Xianbing Ji et al.   Nano Energy

An ultra-thin miniature loop heat pipe cooler for mobile electronics

(2016) Guohui Zhou et al.   APPLIED THERMAL ENGINEERING

Multiple orientations research on heat transfer performances of Ultra-Thin Loop Heat Pipes with different evaporator structures

(2016) Sihui Hong et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Experiment research on the effect of the evaporator’s configuration design of an innovative ultra-thin looped heat pipe

(2016) Sihui Hong et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Development of Ultra-Thin Thermal Ground Planes by Using Stainless-Steel Mesh as Wicking Structure

(2016) Shanshan Xu et al.   JOURNAL OF MICROELECTROMECHANICAL SYSTEMS

Large-area reduced graphene oxide thin film with excellent thermal conductivity and electromagnetic interference shielding effectiveness

(2015) Pradip Kumar et al.   CARBON

Thin Flexible Thermal Ground Planes: Fabrication and Scaling Characterization

(2015) Ryan Lewis et al.   JOURNAL OF MICROELECTROMECHANICAL SYSTEMS

Heat utilisation technologies: A critical review of heat pipes

(2015) C.W. Chan et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Microfabricated ultra-thin all-polymer thermal ground planes

(2015) Ryan Lewis et al.   Science Bulletin

Hierarchical Graphene-Carbon Fiber Composite Paper as a Flexible Lateral Heat Spreader

(2014) Qing-Qiang Kong et al.   ADVANCED FUNCTIONAL MATERIALS

Ultrathin Flexible Graphene Film: An Excellent Thermal Conducting Material with Efficient EMI Shielding

(2014) Bin Shen et al.   ADVANCED FUNCTIONAL MATERIALS

Large-Area Freestanding Graphene Paper for Superior Thermal Management

(2014) Guoqing Xin et al.   ADVANCED MATERIALS

Performance and two-phase flow pattern for micro flat heat pipes

(2014) Kai-Shing Yang et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Characterization of capillary rise dynamics in parallel micro V-grooves

(2014) Daxiang Deng et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Evaluation of capillary performance of sintered porous wicks for loop heat pipe

(2013) Daxiang Deng et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Flat Loop Heat Pipe with Bi-Transport Loops for Graphics Card Cooling

(2013) Dong-Chuan Mo et al.   HEAT TRANSFER ENGINEERING

Effect of fabrication parameters on the thermophysical properties of sintered wicks for heat pipe applications

(2012) F.A. Dominguez Espinosa et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Capillary performance of bi-porous sintered metal wicks

(2012) Chan Byon et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Characterization of capillary performance of composite wicks for two-phase heat transfer devices

(2012) Daxiang Deng et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

A Flat Heat Pipe Architecture Based on Nanostructured Titania

(2010) Changsong Ding et al.   JOURNAL OF MICROELECTROMECHANICAL SYSTEMS

Fabrication and Characterization of the Capillary Performance of Superhydrophilic Cu Micropost Arrays

(2010) Youngsuk Nam et al.   JOURNAL OF MICROELECTROMECHANICAL SYSTEMS

Experimental investigation on capillary force of composite wick structure by IR thermal imaging camera

(2009) Yong Tang et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Experimental study of biporous wicks for high heat flux applications

(2009) Tadej Semenic et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Effect of Wick Characteristics on the Thermal Performance of the Miniature Loop Heat Pipe

(2009) Randeep Singh et al.   JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME

Gravity Effects on the Performance of a Flat Loop Heat Pipe

(2009) Dong-Chuan Mo et al.   MICROGRAVITY SCIENCE AND TECHNOLOGY

The transition from inertial to viscous flow in capillary rise

(2008) N. Fries et al.   JOURNAL OF COLLOID AND INTERFACE SCIENCE

An analytic solution of capillary rise restrained by gravity

(2008) N. Fries et al.   JOURNAL OF COLLOID AND INTERFACE SCIENCE

Superior Thermal Conductivity of Single-Layer Graphene

(2008) Alexander A. Balandin et al.   NANO LETTERS