Determination of mechanical properties of polymer matrix composites reinforced with electrospinning N66, PAN, PVA and PVC nanofibers: A comparative study
Published 2020 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Determination of mechanical properties of polymer matrix composites reinforced with electrospinning N66, PAN, PVA and PVC nanofibers: A comparative study
Authors
Keywords
Epoxy, Damage analysis, Delamination, Electrospinning, N66, PAN, PVA, PVC, Nanofiber, Composite, Vacuum infusion
Journal
Materials Today Communications
Volume 26, Issue -, Pages 101939
Publisher
Elsevier BV
Online
2020-12-03
DOI
10.1016/j.mtcomm.2020.101939
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Experimental and Theoretical Investigation on Flexure Performance of Pultruded GFRP Composite Beams with Damage Analyses
- (2020) Emrah Madenci et al. COMPOSITE STRUCTURES
- Mechanical properties of electrospun nanofiber reinforced/interleaved epoxy matrix composites—A review
- (2020) Usaid A. Shakil et al. POLYMER COMPOSITES
- The effects of stacking sequence on drilling machinability of filament wound hybrid composite pipes: Part-1 mechanical characterization and drilling tests
- (2020) Lokman Gemi et al. COMPOSITES PART B-ENGINEERING
- Buckling and Free Vibration Analyses of Pultruded GFRP Laminated Composites: Experimental, Numerical and Analytical Investigations
- (2020) Emrah Madenci et al. COMPOSITE STRUCTURES
- Experimental analysis of reinforced concrete shear deficient beams with circular web openings strengthened by CFRP composite
- (2020) Ceyhun Aksoylu et al. COMPOSITE STRUCTURES
- Low-velocity impact performance of nanofiber-interlayered aramid/epoxy nanocomposites
- (2019) M. Goodarz et al. COMPOSITES PART B-ENGINEERING
- Interlaminar Toughening of Epoxy Carbon Fiber Reinforced Laminates: Soluble Versus Non-Soluble Veils
- (2019) Giulia Ognibene et al. Polymers
- An experimental study on the effects of various drill types on drilling performance of GFRP composite pipes and damage formation
- (2019) Lokman Gemi et al. COMPOSITES PART B-ENGINEERING
- Effect of electrospun polysulfone/cellulose nanocrystals interleaves on the interlaminar fracture toughness of carbon fiber/epoxy composites
- (2019) Shenming Cai et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Experimental investigation of shear capacity and damage analysis of thinned end prefabricated concrete purlins strengthened by CFRP composite
- (2019) Lokman Gemi et al. COMPOSITE STRUCTURES
- Effect of electrospun nanofibres and MWCNTs on the low velocity impact response of carbon fibre laminates
- (2019) Fabrizio Sarasini et al. COMPOSITE STRUCTURES
- The effects of stacking sequence on drilling machinability of filament wound hybrid composite pipes: Part-2 damage analysis and surface quality
- (2019) Lokman Gemi et al. COMPOSITE STRUCTURES
- Experimental study on compressive behavior and failure analysis of composite concrete confined by glass/epoxy ±55° filament wound pipes
- (2018) Lokman Gemi et al. COMPOSITE STRUCTURES
- Experimental and numerical investigation of low velocity impact on electrospun nanofiber modified composite laminates
- (2018) Hesam Yademellat et al. COMPOSITE STRUCTURES
- Experimental and statistical analysis of low velocity impact response of filament wound composite pipes
- (2018) Lokman Gemi et al. COMPOSITES PART B-ENGINEERING
- Cryogenic machining of carbon fiber reinforced plastic (CFRP) composites and the effects of cryogenic treatment on tensile properties: A comparative study
- (2018) Sezer Morkavuk et al. COMPOSITES PART B-ENGINEERING
- CNT-PAN hybrid nanofibrous mat interleaved carbon/epoxy laminates with improved Mode I interlaminar fracture toughness
- (2018) Volkan Eskizeybek et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Mixed Mode delamination in carbon nanotube/nanofiber interlayered composites
- (2018) Ozge Kaynan et al. COMPOSITES PART B-ENGINEERING
- Investigation of the effect of stacking sequence on low velocity impact response and damage formation in hybrid composite pipes under internal pressure. A comparative study
- (2018) Lokman Gemi COMPOSITES PART B-ENGINEERING
- Electrospun nanofiber: Emerging reinforcing filler in polymer matrix composite materials
- (2017) Guolong Wang et al. PROGRESS IN POLYMER SCIENCE
- Nanofiber technology: current status and emerging developments
- (2017) Kenry et al. PROGRESS IN POLYMER SCIENCE
- PES/POSS Soluble Veils as Advanced Modifiers for Multifunctional Fiber Reinforced Composites
- (2017) Gianluca Cicala et al. Polymers
- Damage-Resistant Composites Using Electrospun Nanofibers: A Multiscale Analysis of the Toughening Mechanisms
- (2016) Lode Daelemans et al. ACS Applied Materials & Interfaces
- Influence of Soluble Electrospun Co-Polyethersulfone Veils on Dynamic Mechanical and Morphological Properties of Epoxy Composites: Effect of Polymer Molar Mass
- (2016) Gianluca Cicala et al. ADVANCES IN POLYMER TECHNOLOGY
- The effect of thickness of Nylon 6,6 nanofibrous mat on Modes I–II fracture mechanics of UD and woven composite laminates
- (2016) T. Brugo et al. COMPOSITE STRUCTURES
- Uniaxially aligned electrospun fibers for advanced nanocomposites based on a model PVOH-epoxy system
- (2016) Samaneh Karimi et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Mechanical properties of vegetal yarn: Statistical approach
- (2016) Ahmed Belaadi et al. COMPOSITES PART B-ENGINEERING
- Low velocity impact response of prestressed functionally graded hybrid pipes
- (2016) Lokman Gemi et al. COMPOSITES PART B-ENGINEERING
- The effect of nanofibrous membrane thickness on fracture behaviour of modified composite laminates – A numerical and experimental study
- (2016) H. Saghafi et al. COMPOSITES PART B-ENGINEERING
- Microstructure–bifilm interaction and its relation with mechanical properties in A356
- (2016) Tansel Tunçay et al. INTERNATIONAL JOURNAL OF CAST METALS RESEARCH
- Microstructure and porosity evaluation in laser-cladding deposited Ni-based coatings
- (2016) Chao Zeng et al. SURFACE & COATINGS TECHNOLOGY
- Mode I and Mode II interlaminar fracture toughness of composite laminates interleaved with electrospun nanofibre veils
- (2015) Gareth W. Beckermann et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Cohesive zone modelling of delamination response of a composite laminate with interleaved nylon 6,6 nanofibres
- (2015) G. Giuliese et al. COMPOSITES PART B-ENGINEERING
- The effect of PVDF nanofibers on mode-I fracture toughness of composite materials
- (2015) H. Saghafi et al. COMPOSITES PART B-ENGINEERING
- Flexural properties of experimental nanofiber reinforced composite are affected by resin composition and nanofiber/resin ratio
- (2015) Hugo A. Vidotti et al. DENTAL MATERIALS
- A review on electrospinning for membrane fabrication: Challenges and applications
- (2015) Farah Ejaz Ahmed et al. DESALINATION
- Recent progress in electrospun nanofibers: Reinforcement effect and mechanical performance
- (2015) Soheila Mohammadzadehmoghadam et al. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS
- Design and Characterization of Electrospun Polyamide Nanofiber Media for Air Filtration Applications
- (2014) Jonas Matulevicius et al. Journal of Nanomaterials
- The potential use of electrospun polylactic acid nanofibers as alternative reinforcements in an epoxy composite system
- (2014) Yu Dong et al. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS
- Effects of Nylon 6,6 nanofibrous mats on thermal properties and delamination behavior of high performance CFRP laminates
- (2014) Sabina Alessi et al. POLYMER COMPOSITES
- The self-reinforcing effect of Nylon 6,6 nano-fibres on CFRP laminates subjected to low velocity impact
- (2013) R. Palazzetti et al. COMPOSITE STRUCTURES
- Improvement in the mechanical performances of carbon fiber/epoxy composite with addition of nano-(Polyvinyl alcohol) fibers
- (2013) Nguyen Tien Phong et al. COMPOSITE STRUCTURES
- The effect of interleaved composite nanofibrous mats on delamination behavior of polymeric composite materials
- (2013) H. Saghafi et al. COMPOSITE STRUCTURES
- Nano-epoxy resins containing electrospun carbon nanofibers and the resulting hybrid multi-scale composites
- (2013) Qi Chen et al. COMPOSITES PART B-ENGINEERING
- Tough and Transparent Nylon-6 Electrospun Nanofiber Reinforced Melamine–Formaldehyde Composites
- (2012) Shaohua Jiang et al. ACS Applied Materials & Interfaces
- Manufacture of Void-Free Electrospun Polymer Nanofiber Composites with Optimized Mechanical Properties
- (2012) Urszula Stachewicz et al. ACS Applied Materials & Interfaces
- Fabrication and mechanical properties of hybrid multi-scale epoxy composites reinforced with conventional carbon fiber fabrics surface-attached with electrospun carbon nanofiber mats
- (2012) Qi Chen et al. COMPOSITES PART B-ENGINEERING
- Improving mechanical properties of alginate hydrogel by reinforcement with ethanol treated polycaprolactone nanofibers
- (2012) Jinah Jang et al. COMPOSITES PART B-ENGINEERING
- Strengthening of steel structures with fiber-reinforced polymer composites
- (2012) J.G. Teng et al. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
- Effect of oxide bifilms on the mechanical properties of cast Al–7Si–0.3Mg alloy and the roll of runner height after filter on their formation
- (2012) Ghasem Eisaabadi Bozchaloei et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Optimization of stabilization conditions for electrospun polyacrylonitrile nanofibers
- (2012) Meiyu Wu et al. POLYMER DEGRADATION AND STABILITY
- Early stage evolution of structure and nanoscale property of nanofibers in thermally induced phase separation process
- (2012) Jundong Shao et al. REACTIVE & FUNCTIONAL POLYMERS
- Influence of electrospun Nylon 6,6 nanofibrous mats on the interlaminar properties of Gr–epoxy composite laminates
- (2011) R. Palazzetti et al. COMPOSITE STRUCTURES
- Hybrid multi-scale composites developed from glass microfiber fabrics and nano-epoxy resins containing electrospun glass nanofibers
- (2011) Qi Chen et al. COMPOSITES PART B-ENGINEERING
- Fabrication and evaluation of polyamide 6 composites with electrospun polyimide nanofibers as skeletal framework
- (2011) Yu Chen et al. COMPOSITES PART B-ENGINEERING
- Mechanical properties of individual electrospun PA 6(3)T fibers and their variation with fiber diameter
- (2011) Chia-Ling Pai et al. POLYMER
- Effects of fiber surface chemistry and roughness on interfacial structures of electrospun fiber reinforced epoxy composite films
- (2011) Huaqiang Liao et al. POLYMER COMPOSITES
- Electrospinning: A fascinating fiber fabrication technique
- (2010) Nandana Bhardwaj et al. BIOTECHNOLOGY ADVANCES
- Electrospun nanofibre toughened carbon/epoxy composites: Effects of polyetherketone cardo (PEK-C) nanofibre diameter and interlayer thickness
- (2010) Jin Zhang et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Poly(ε-caprolactone) filled with electrospun nylon fibres: A model for a facile composite fabrication
- (2010) Ramesh Neppalli et al. EUROPEAN POLYMER JOURNAL
- Electrospun nanofibers for enhancing structural performance of composite materials
- (2010) Andrea Zucchelli et al. POLYMERS FOR ADVANCED TECHNOLOGIES
- Effect of Nylon-66 nano-fiber interleaving on impact damage resistance of epoxy/carbon fiber composite laminates
- (2009) Paul Akangah et al. COMPOSITE STRUCTURES
- Characterization of the thermo-mechanical behaviour of Hemp fibres intended for the manufacturing of high performance composites
- (2009) Vincent Placet COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- The behaviour of double oxide film defects in liquid Al alloys under atmospheric and reduced pressures
- (2009) R. Raiszadeh et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Progressive fatigue failure behavior of glass/epoxy (±75)2 filament-wound pipes under pure internal pressure
- (2009) Lokman Gemi et al. MATERIALS & DESIGN
- Cellulose nanofiber reinforced poly(vinyl alcohol) composite film with high visible light transmittance
- (2008) Chunyi Tang et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Nanofibers drawing and nanodevices assembly in poly(trimethylene terephthalate)
- (2008) Xiaobo Xing et al. OPTICS EXPRESS
- Development of a transparent PMMA composite reinforced with nanofibers
- (2008) Lu-Song Chen et al. POLYMER COMPOSITES
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExplorePublish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn More