Determination of mechanical properties of polymer matrix composites reinforced with electrospinning N66, PAN, PVA and PVC nanofibers: A comparative study
出版年份 2020 全文链接
标题
Determination of mechanical properties of polymer matrix composites reinforced with electrospinning N66, PAN, PVA and PVC nanofibers: A comparative study
作者
关键词
Epoxy, Damage analysis, Delamination, Electrospinning, N66, PAN, PVA, PVC, Nanofiber, Composite, Vacuum infusion
出版物
Materials Today Communications
Volume 26, Issue -, Pages 101939
出版商
Elsevier BV
发表日期
2020-12-03
DOI
10.1016/j.mtcomm.2020.101939
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Experimental and Theoretical Investigation on Flexure Performance of Pultruded GFRP Composite Beams with Damage Analyses
- (2020) Emrah Madenci et al. COMPOSITE STRUCTURES
- Mechanical properties of electrospun nanofiber reinforced/interleaved epoxy matrix composites—A review
- (2020) Usaid A. Shakil et al. POLYMER COMPOSITES
- The effects of stacking sequence on drilling machinability of filament wound hybrid composite pipes: Part-1 mechanical characterization and drilling tests
- (2020) Lokman Gemi et al. COMPOSITES PART B-ENGINEERING
- Buckling and Free Vibration Analyses of Pultruded GFRP Laminated Composites: Experimental, Numerical and Analytical Investigations
- (2020) Emrah Madenci et al. COMPOSITE STRUCTURES
- Experimental analysis of reinforced concrete shear deficient beams with circular web openings strengthened by CFRP composite
- (2020) Ceyhun Aksoylu et al. COMPOSITE STRUCTURES
- Low-velocity impact performance of nanofiber-interlayered aramid/epoxy nanocomposites
- (2019) M. Goodarz et al. COMPOSITES PART B-ENGINEERING
- Interlaminar Toughening of Epoxy Carbon Fiber Reinforced Laminates: Soluble Versus Non-Soluble Veils
- (2019) Giulia Ognibene et al. Polymers
- An experimental study on the effects of various drill types on drilling performance of GFRP composite pipes and damage formation
- (2019) Lokman Gemi et al. COMPOSITES PART B-ENGINEERING
- Effect of electrospun polysulfone/cellulose nanocrystals interleaves on the interlaminar fracture toughness of carbon fiber/epoxy composites
- (2019) Shenming Cai et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Experimental investigation of shear capacity and damage analysis of thinned end prefabricated concrete purlins strengthened by CFRP composite
- (2019) Lokman Gemi et al. COMPOSITE STRUCTURES
- Effect of electrospun nanofibres and MWCNTs on the low velocity impact response of carbon fibre laminates
- (2019) Fabrizio Sarasini et al. COMPOSITE STRUCTURES
- The effects of stacking sequence on drilling machinability of filament wound hybrid composite pipes: Part-2 damage analysis and surface quality
- (2019) Lokman Gemi et al. COMPOSITE STRUCTURES
- Experimental study on compressive behavior and failure analysis of composite concrete confined by glass/epoxy ±55° filament wound pipes
- (2018) Lokman Gemi et al. COMPOSITE STRUCTURES
- Experimental and numerical investigation of low velocity impact on electrospun nanofiber modified composite laminates
- (2018) Hesam Yademellat et al. COMPOSITE STRUCTURES
- Experimental and statistical analysis of low velocity impact response of filament wound composite pipes
- (2018) Lokman Gemi et al. COMPOSITES PART B-ENGINEERING
- Cryogenic machining of carbon fiber reinforced plastic (CFRP) composites and the effects of cryogenic treatment on tensile properties: A comparative study
- (2018) Sezer Morkavuk et al. COMPOSITES PART B-ENGINEERING
- CNT-PAN hybrid nanofibrous mat interleaved carbon/epoxy laminates with improved Mode I interlaminar fracture toughness
- (2018) Volkan Eskizeybek et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Mixed Mode delamination in carbon nanotube/nanofiber interlayered composites
- (2018) Ozge Kaynan et al. COMPOSITES PART B-ENGINEERING
- Investigation of the effect of stacking sequence on low velocity impact response and damage formation in hybrid composite pipes under internal pressure. A comparative study
- (2018) Lokman Gemi COMPOSITES PART B-ENGINEERING
- Electrospun nanofiber: Emerging reinforcing filler in polymer matrix composite materials
- (2017) Guolong Wang et al. PROGRESS IN POLYMER SCIENCE
- Nanofiber technology: current status and emerging developments
- (2017) Kenry et al. PROGRESS IN POLYMER SCIENCE
- PES/POSS Soluble Veils as Advanced Modifiers for Multifunctional Fiber Reinforced Composites
- (2017) Gianluca Cicala et al. Polymers
- Damage-Resistant Composites Using Electrospun Nanofibers: A Multiscale Analysis of the Toughening Mechanisms
- (2016) Lode Daelemans et al. ACS Applied Materials & Interfaces
- Influence of Soluble Electrospun Co-Polyethersulfone Veils on Dynamic Mechanical and Morphological Properties of Epoxy Composites: Effect of Polymer Molar Mass
- (2016) Gianluca Cicala et al. ADVANCES IN POLYMER TECHNOLOGY
- The effect of thickness of Nylon 6,6 nanofibrous mat on Modes I–II fracture mechanics of UD and woven composite laminates
- (2016) T. Brugo et al. COMPOSITE STRUCTURES
- Uniaxially aligned electrospun fibers for advanced nanocomposites based on a model PVOH-epoxy system
- (2016) Samaneh Karimi et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Mechanical properties of vegetal yarn: Statistical approach
- (2016) Ahmed Belaadi et al. COMPOSITES PART B-ENGINEERING
- Low velocity impact response of prestressed functionally graded hybrid pipes
- (2016) Lokman Gemi et al. COMPOSITES PART B-ENGINEERING
- The effect of nanofibrous membrane thickness on fracture behaviour of modified composite laminates – A numerical and experimental study
- (2016) H. Saghafi et al. COMPOSITES PART B-ENGINEERING
- Microstructure–bifilm interaction and its relation with mechanical properties in A356
- (2016) Tansel Tunçay et al. INTERNATIONAL JOURNAL OF CAST METALS RESEARCH
- Microstructure and porosity evaluation in laser-cladding deposited Ni-based coatings
- (2016) Chao Zeng et al. SURFACE & COATINGS TECHNOLOGY
- Mode I and Mode II interlaminar fracture toughness of composite laminates interleaved with electrospun nanofibre veils
- (2015) Gareth W. Beckermann et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Cohesive zone modelling of delamination response of a composite laminate with interleaved nylon 6,6 nanofibres
- (2015) G. Giuliese et al. COMPOSITES PART B-ENGINEERING
- The effect of PVDF nanofibers on mode-I fracture toughness of composite materials
- (2015) H. Saghafi et al. COMPOSITES PART B-ENGINEERING
- Flexural properties of experimental nanofiber reinforced composite are affected by resin composition and nanofiber/resin ratio
- (2015) Hugo A. Vidotti et al. DENTAL MATERIALS
- A review on electrospinning for membrane fabrication: Challenges and applications
- (2015) Farah Ejaz Ahmed et al. DESALINATION
- Recent progress in electrospun nanofibers: Reinforcement effect and mechanical performance
- (2015) Soheila Mohammadzadehmoghadam et al. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS
- Design and Characterization of Electrospun Polyamide Nanofiber Media for Air Filtration Applications
- (2014) Jonas Matulevicius et al. Journal of Nanomaterials
- The potential use of electrospun polylactic acid nanofibers as alternative reinforcements in an epoxy composite system
- (2014) Yu Dong et al. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS
- Effects of Nylon 6,6 nanofibrous mats on thermal properties and delamination behavior of high performance CFRP laminates
- (2014) Sabina Alessi et al. POLYMER COMPOSITES
- The self-reinforcing effect of Nylon 6,6 nano-fibres on CFRP laminates subjected to low velocity impact
- (2013) R. Palazzetti et al. COMPOSITE STRUCTURES
- Improvement in the mechanical performances of carbon fiber/epoxy composite with addition of nano-(Polyvinyl alcohol) fibers
- (2013) Nguyen Tien Phong et al. COMPOSITE STRUCTURES
- The effect of interleaved composite nanofibrous mats on delamination behavior of polymeric composite materials
- (2013) H. Saghafi et al. COMPOSITE STRUCTURES
- Nano-epoxy resins containing electrospun carbon nanofibers and the resulting hybrid multi-scale composites
- (2013) Qi Chen et al. COMPOSITES PART B-ENGINEERING
- Tough and Transparent Nylon-6 Electrospun Nanofiber Reinforced Melamine–Formaldehyde Composites
- (2012) Shaohua Jiang et al. ACS Applied Materials & Interfaces
- Manufacture of Void-Free Electrospun Polymer Nanofiber Composites with Optimized Mechanical Properties
- (2012) Urszula Stachewicz et al. ACS Applied Materials & Interfaces
- Fabrication and mechanical properties of hybrid multi-scale epoxy composites reinforced with conventional carbon fiber fabrics surface-attached with electrospun carbon nanofiber mats
- (2012) Qi Chen et al. COMPOSITES PART B-ENGINEERING
- Improving mechanical properties of alginate hydrogel by reinforcement with ethanol treated polycaprolactone nanofibers
- (2012) Jinah Jang et al. COMPOSITES PART B-ENGINEERING
- Strengthening of steel structures with fiber-reinforced polymer composites
- (2012) J.G. Teng et al. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
- Effect of oxide bifilms on the mechanical properties of cast Al–7Si–0.3Mg alloy and the roll of runner height after filter on their formation
- (2012) Ghasem Eisaabadi Bozchaloei et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Optimization of stabilization conditions for electrospun polyacrylonitrile nanofibers
- (2012) Meiyu Wu et al. POLYMER DEGRADATION AND STABILITY
- Early stage evolution of structure and nanoscale property of nanofibers in thermally induced phase separation process
- (2012) Jundong Shao et al. REACTIVE & FUNCTIONAL POLYMERS
- Influence of electrospun Nylon 6,6 nanofibrous mats on the interlaminar properties of Gr–epoxy composite laminates
- (2011) R. Palazzetti et al. COMPOSITE STRUCTURES
- Hybrid multi-scale composites developed from glass microfiber fabrics and nano-epoxy resins containing electrospun glass nanofibers
- (2011) Qi Chen et al. COMPOSITES PART B-ENGINEERING
- Fabrication and evaluation of polyamide 6 composites with electrospun polyimide nanofibers as skeletal framework
- (2011) Yu Chen et al. COMPOSITES PART B-ENGINEERING
- Mechanical properties of individual electrospun PA 6(3)T fibers and their variation with fiber diameter
- (2011) Chia-Ling Pai et al. POLYMER
- Effects of fiber surface chemistry and roughness on interfacial structures of electrospun fiber reinforced epoxy composite films
- (2011) Huaqiang Liao et al. POLYMER COMPOSITES
- Electrospinning: A fascinating fiber fabrication technique
- (2010) Nandana Bhardwaj et al. BIOTECHNOLOGY ADVANCES
- Electrospun nanofibre toughened carbon/epoxy composites: Effects of polyetherketone cardo (PEK-C) nanofibre diameter and interlayer thickness
- (2010) Jin Zhang et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Poly(ε-caprolactone) filled with electrospun nylon fibres: A model for a facile composite fabrication
- (2010) Ramesh Neppalli et al. EUROPEAN POLYMER JOURNAL
- Electrospun nanofibers for enhancing structural performance of composite materials
- (2010) Andrea Zucchelli et al. POLYMERS FOR ADVANCED TECHNOLOGIES
- Effect of Nylon-66 nano-fiber interleaving on impact damage resistance of epoxy/carbon fiber composite laminates
- (2009) Paul Akangah et al. COMPOSITE STRUCTURES
- Characterization of the thermo-mechanical behaviour of Hemp fibres intended for the manufacturing of high performance composites
- (2009) Vincent Placet COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- The behaviour of double oxide film defects in liquid Al alloys under atmospheric and reduced pressures
- (2009) R. Raiszadeh et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Progressive fatigue failure behavior of glass/epoxy (±75)2 filament-wound pipes under pure internal pressure
- (2009) Lokman Gemi et al. MATERIALS & DESIGN
- Cellulose nanofiber reinforced poly(vinyl alcohol) composite film with high visible light transmittance
- (2008) Chunyi Tang et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Nanofibers drawing and nanodevices assembly in poly(trimethylene terephthalate)
- (2008) Xiaobo Xing et al. OPTICS EXPRESS
- Development of a transparent PMMA composite reinforced with nanofibers
- (2008) Lu-Song Chen et al. POLYMER COMPOSITES
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started