New Aluminum Alloys Specifically Designed for Laser Powder Bed Fusion: A Review

Microstructure and mechanical properties of Al-Mg-Zr alloys processed by selective laser melting

(2018) Joseph R. Croteau et al.   ACTA MATERIALIA

Microstructure and mechanical properties of Al-Cu alloys fabricated by selective laser melting of powder mixtures

(2018) P. Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

A comparison of Selective Laser Melting with bulk rapid solidification of AlSi10Mg alloy

(2018) Silvia Marola et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of Zr content on formability, microstructure and mechanical properties of selective laser melted Zr modified Al-4.24Cu-1.97Mg-0.56Mn alloys

(2018) Xiaojia Nie et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Analysis of processing parameters and characteristics of selective laser melted high strength Al-Cu-Mg alloys: From single tracks to cubic samples

(2018) Xiaojia Nie et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Single scan track analyses on aluminium based powders

(2018) Alberta Aversa et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Effect of laser rescanning on the grain microstructure of a selective laser melted Al-Mg-Zr alloy

(2018) S. Griffiths et al.   MATERIALS CHARACTERIZATION

Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting

(2018) Pei Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Characterisation of AlScZr and AlErZr alloys processed by rapid laser melting

(2018) Qingbo Jia et al.   SCRIPTA MATERIALIA

Laser Powder Bed Fusion of a High Strength Al-Si-Zn-Mg-Cu Alloy

(2018) Alberta Aversa et al.   Metals

Influence of SLM scan-speed on microstructure, precipitation of Al 3 Sc particles and mechanical properties in Sc- and Zr-modified Al-Mg alloys

(2018) A.B. Spierings et al.   MATERIALS & DESIGN

Contribution of Mg2Si precipitates to the strength of direct metal laser sintered AlSi10Mg

(2018) Amir Hadadzadeh et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and tensile property of a novel AlZnMgScZr alloy additively manufactured by gas atomization and laser powder bed fusion

(2018) Le Zhou et al.   SCRIPTA MATERIALIA

The Effect of Selective Laser Melting Process Parameters on the Microstructure and Mechanical Properties of Al6061 and AlSi10Mg Alloys

(2018) Ahmed Maamoun et al.   Materials

Multiple precipitation pathways in an Al-7Si-0.6Mg alloy fabricated by selective laser melting

(2018) Jeremy H. Rao et al.   SCRIPTA MATERIALIA

Novel heat-resistant Al-Si-Ni-Fe alloy manufactured by selective laser melting

(2018) Dario Rafael Manca et al.   MATERIALS LETTERS

Oxides, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting

(2017) Ming Tang et al.   INTERNATIONAL JOURNAL OF FATIGUE

Laser powder bed fusion of Ti-6Al-4V parts: Thermal modeling and mechanical implications

(2017) Mohammad Masoomi et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

A study of the microstructure and the mechanical properties of an Al Si Ni alloy produced via selective laser melting

(2017) Alberta Aversa et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Characterisation of a novel Sc and Zr modified Al–Mg alloy fabricated by selective laser melting

(2017) Yunjia Shi et al.   MATERIALS LETTERS

Selective laser melting of aluminum alloys

(2017) Nesma T. Aboulkhair et al.   MRS BULLETIN

3D printing of high-strength aluminium alloys

(2017) John H. Martin et al.   NATURE

Selective laser melting of a novel Sc and Zr modified Al-6.2 Mg alloy: Processing, microstructure, and properties

(2017) Ruidi Li et al.   POWDER TECHNOLOGY

Effect of Zirconium addition on crack, microstructure and mechanical behavior of selective laser melted Al-Cu-Mg alloy

(2017) Hu Zhang et al.   SCRIPTA MATERIALIA

Effect of Process and Post-Process Conditions on the Mechanical Properties of an A357 Alloy Produced via Laser Powder Bed Fusion

(2017) Alberta Aversa et al.   Metals

Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting

(2017) A.B. Spierings et al.   MATERIALS & DESIGN

Selective laser melting of Al7050 powder: Melting mode transition and comparison of the characteristics between the keyhole and conduction mode

(2017) Ting Qi et al.   MATERIALS & DESIGN

In-situ characterization of laser-powder interaction and cooling rates through high-speed imaging of powder bed fusion additive manufacturing

(2017) Umberto Scipioni Bertoli et al.   MATERIALS & DESIGN

Microstructure and strength of selectively laser melted AlSi10Mg

(2016) J. Wu et al.   ACTA MATERIALIA

Microstructure and mechanical properties of as-processed scandium-modified aluminium using selective laser melting

(2016) Adriaan B. Spierings et al.   CIRP ANNALS-MANUFACTURING TECHNOLOGY

Effect of heat treatment on corrosion resistance of DMLS AlSi10Mg alloy

(2016) M. Cabrini et al.   ELECTROCHIMICA ACTA

Rapid Solidification: Selective Laser Melting of AlSi10Mg

(2016) Ming Tang et al.   JOM

Stress partitioning behavior of an AlSi10Mg alloy produced by selective laser melting during tensile deformation using in situ neutron diffraction

(2016) Dong-Kyu Kim et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure and phase formation in Al–20Si–5Fe–3Cu–1Mg synthesized by selective laser melting

(2016) Pan Ma et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Changing the alloy composition of Al7075 for better processability by selective laser melting

(2016) Maria L. Montero-Sistiaga et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

On the formation of AlSi10Mg single tracks and layers in selective laser melting: Microstructure and nano-mechanical properties

(2016) Nesma T. Aboulkhair et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: Microstructure evolution, mechanical properties and fracture mechanism

(2016) Wei Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Selective laser melting of high strength Al–Cu–Mg alloys: Processing, microstructure and mechanical properties

(2016) Hu Zhang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Selective laser melting of aluminium and aluminium metal matrix composites: review

(2016) T. B. Sercombe et al.   MATERIALS TECHNOLOGY

Selective laser melting of AlSi10Mg: Influence of post-processing on the microstructural and tensile properties development

(2016) U. Tradowsky et al.   MATERIALS & DESIGN

Calculation of laser absorption by metal powders in additive manufacturing

(2015) C. D. Boley et al.   APPLIED OPTICS

Selective laser melting of Al–8.5Fe–1.3V–1.7Si alloy: Investigation on the resultant microstructure and hardness

(2015) Lijing Zheng et al.   Chinese Journal of Aeronautics

Characterization of Al–Fe–V–Si heat-resistant aluminum alloy components fabricated by selective laser melting

(2015) Shaobo Sun et al.   JOURNAL OF MATERIALS RESEARCH

A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties

(2015) E.O. Olakanmi et al.   PROGRESS IN MATERIALS SCIENCE

Metal Additive Manufacturing: A Review

(2014) William E. Frazier   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing

(2014) Wayne E. King et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder

(2014) Yali Li et al.   MATERIALS & DESIGN

The role of a low-energy–density re-scan in fabricating crack-free Al85Ni5Y6Co2Fe2 bulk metallic glass composites via selective laser melting

(2014) X.P. Li et al.   MATERIALS & DESIGN

Selective laser melting of an Al86Ni6Y4.5Co2La1.5 metallic glass: Processing, microstructure evolution and mechanical properties

(2014) X.P. Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Laser additive manufacturing of metallic components: materials, processes and mechanisms

(2012) D D Gu et al.   INTERNATIONAL MATERIALS REVIEWS

Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior

(2011) Erhard Brandl et al.   MATERIALS & DESIGN

Selective laser melting of aluminium components

(2010) Eleftherios Louvis et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Microstructure and mechanical properties of Al–Si–X alloys fabricated by gas atomization and extrusion process

(2009) T.H. Lee et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of rapid solidification on the microstructure and mechanical properties of hot-pressed Al–20Si–5Fe alloys

(2009) M. Rajabi et al.   MATERIALS CHARACTERIZATION

The relation between liquation and solidification cracks in pulsed laser welding of 2024 aluminium alloy

(2009) F. Malek Ghaini et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING