Efficient optimization methodology for laser powder bed fusion parameters to manufacture dense and mechanically sound parts validated on AlSi12 alloy
Published 2020 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Efficient optimization methodology for laser powder bed fusion parameters to manufacture dense and mechanically sound parts validated on AlSi12 alloy
Authors
Keywords
Laser powder bed fusion (L-PBF), Selective laser melting (SLM), Parameters optimization, Methodology, Design of experiments (DOE), Aluminum alloy
Journal
MATERIALS & DESIGN
Volume 199, Issue -, Pages 109433
Publisher
Elsevier BV
Online
2020-12-25
DOI
10.1016/j.matdes.2020.109433
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Multi-objective accelerated process optimization of mechanical properties in laser-based additive manufacturing: Case study on Selective Laser Melting (SLM) Ti-6Al-4V
- (2019) Amir M. Aboutaleb et al. Journal of Manufacturing Processes
- High-density tungsten fabricated by selective laser melting: Densification, microstructure, mechanical and thermal performance
- (2019) Shifeng Wen et al. OPTICS AND LASER TECHNOLOGY
- Ductilisation and fatigue life enhancement of selective laser melted AlSi10Mg by friction stir processing
- (2019) Juan Guillermo Santos Macías et al. SCRIPTA MATERIALIA
- Optimization and comparison of porosity rate measurement methods of Selective Laser Melted metallic parts
- (2019) Thibaut de Terris et al. Additive Manufacturing
- On the study of keyhole-mode melting in selective laser melting process
- (2019) K.Q. Le et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- A time-saving and cost-effective method to process alloys by Laser Powder Bed Fusion
- (2019) Federico Bosio et al. MATERIALS & DESIGN
- Analysis of processing parameters and characteristics of selective laser melted high strength Al-Cu-Mg alloys: From single tracks to cubic samples
- (2018) Xiaojia Nie et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Single scan track analyses on aluminium based powders
- (2018) Alberta Aversa et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Porosity formation mechanisms and fatigue response in Al-Si-Mg alloys made by selective laser melting
- (2018) Kun V. Yang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A Computational Study on Porosity Evolution in Parts Produced by Selective Laser Melting
- (2018) J. L. Tan et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Influence of scan strategy and molten pool configuration on microstructures and tensile properties of selective laser melting additive manufactured aluminum based parts
- (2018) Donghua Dai et al. OPTICS AND LASER TECHNOLOGY
- Optimization of SLM process parameters for Ti6Al4V medical implants
- (2018) Mahmoud Elsayed et al. RAPID PROTOTYPING JOURNAL
- Formation of scanning tracks during Selective Laser Melting (SLM) of pure tungsten powder: Morphology, geometric features and forming mechanisms
- (2018) Meng Guo et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Laser directed energy deposition of water-atomized iron powder: Process optimization and microstructure of single-tracks
- (2018) Mohammad Ansari et al. OPTICS AND LASER TECHNOLOGY
- Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel
- (2017) Aref Yadollahi et al. INTERNATIONAL JOURNAL OF FATIGUE
- Additive manufacturing of fatigue resistant materials: Challenges and opportunities
- (2017) Aref Yadollahi et al. INTERNATIONAL JOURNAL OF FATIGUE
- Microstructure and strength analysis of eutectic Al-Si alloy in-situ manufactured using selective laser melting from elemental powder mixture
- (2017) Nan Kang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting
- (2016) Jyoti Suryawanshi et al. ACTA MATERIALIA
- Influence of hatch spacing on heat and mass transfer, thermodynamics and laser processability during additive manufacturing of Inconel 718 alloy
- (2016) Mujian Xia et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using X-ray computed tomography
- (2016) I. Maskery et al. MATERIALS CHARACTERIZATION
- Microstructure and wear behavior of in-situ hypereutectic Al–high Si alloys produced by selective laser melting
- (2016) Nan Kang et al. MATERIALS & DESIGN
- On the role of melt flow into the surface structure and porosity development during selective laser melting
- (2015) Chunlei Qiu et al. ACTA MATERIALIA
- Influence of process-induced microstructure and imperfections on mechanical properties of AlSi12 processed by selective laser melting
- (2015) Shafaqat Siddique et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Selective laser melting of AlSi10Mg alloy: Process optimisation and mechanical properties development
- (2015) Noriko Read et al. MATERIALS & DESIGN
- Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel
- (2015) Aref Yadollahi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Optimisation of selective laser melting for a high temperature Ni-superalloy
- (2015) Luke N. Carter et al. RAPID PROTOTYPING JOURNAL
- Processing AlSi10Mg by selective laser melting: parameter optimisation and material characterisation
- (2014) K. Kempen et al. MATERIALS SCIENCE AND TECHNOLOGY
- Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
- (2012) Lore Thijs et al. ACTA MATERIALIA
- Property evaluation of 304L stainless steel fabricated by selective laser melting
- (2012) K. Abd‐Elghany et al. RAPID PROTOTYPING JOURNAL
- Balling behavior of stainless steel and nickel powder during selective laser melting process
- (2011) Ruidi Li et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Single track formation in selective laser melting of metal powders
- (2010) I. Yadroitsev et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Balling phenomena in direct laser sintering of stainless steel powder: Metallurgical mechanisms and control methods
- (2009) Dongdong Gu et al. MATERIALS & DESIGN
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreDiscover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversation