The effect of austenite grain size on deformation mechanism of Fe–17Mn steel

Comparison of dislocation density, twin fault probability, and stacking fault energy between CrCoNi and CrCoNiFe medium entropy alloys deformed at 293 and 140K

(2020) Wanchuck Woo et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of Ni, C and Ti Addition on Shape Recovery Behavior and the Mechanical Properties of Fe-17Mn-5Si-5Cr Shape Memory Alloys

(2020) Dohyoung Kim et al.   Korean Journal of Metals and Materials

Microstructure-mechanical property evaluation and deformation mechanism in Al added medium Mn steel processed through intercritical rolling and annealing

(2020) Biraj Kumar Sahoo et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effects of Strain Rate on the TRIP–TWIP Transition of an Austenitic Fe-18Mn-2Si-2Al Steel

(2019) M. Raposo et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Microstructure, mechanical properties, and damping capacity in stir zone after friction stir welding of Fe–17Mn damping alloy

(2019) Seung-Joon Lee et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of Cr and N on Stress Corrosion Cracking Behavior of Fe-18Mn Steel

(2019) Heesoo Choi et al.   Korean Journal of Metals and Materials

Role of grain size on deformation microstructures and stretch-flangeability of TWIP steel

(2019) Hojun Gwon et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Tensile properties and deformation mode of Si-added Fe-18Mn-0.6C steels

(2018) Sang-Min Lee et al.   ACTA MATERIALIA

Influence of original austenite grain size on tensile properties of a high-manganese transformation-induced plasticity (TRIP) steel

(2018) Xing Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Cu addition effects on TRIP to TWIP transition and tensile property improvement of ultra-high-strength austenitic high-Mn steels

(2018) Jin Hyeok Choi et al.   ACTA MATERIALIA

A novel ultrafine-grained Fe 22Mn 0.6C TWIP steel with superior strength and ductility

(2017) Y.Z. Tian et al.   MATERIALS CHARACTERIZATION

Effect of carbon on the damping capacity and mechanical properties of thermally trained Fe-Mn based high damping alloys

(2017) Won Seok Choi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Stacking Fault Energy Maps of Fe–Mn–Al–C–Si Steels: Effect of Temperature, Grain Size, and Variations in Compositions

(2016) O. A. Zambrano   JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME

The effects of grain size on yielding, strain hardening, and mechanical twinning in Fe–18Mn–0.6C–1.5Al twinning-induced plasticity steel

(2016) Singon Kang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Coupled strengthening in a medium manganese lightweight steel with an inhomogeneously grained structure of austenite

(2015) Chan-Young Lee et al.   ACTA MATERIALIA

Relationship between grain size and ductile-to-brittle transition at room temperature in Fe–18Mn–0.6C–1.5Si twinning-induced plasticity steel

(2015) Seo Yeon Jo et al.   JOURNAL OF ALLOYS AND COMPOUNDS

The size effect of initial martensite constituents on the microstructure and tensile properties of intercritically annealed Fe–9Mn–0.05C steel

(2015) Jeongho Han et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Novel ferrite–austenite duplex lightweight steel with 77% ductility by transformation induced plasticity and twinning induced plasticity mechanisms

(2014) Seok Su Sohn et al.   ACTA MATERIALIA

The influence of manganese content on the stacking fault and austenite/ε-martensite interfacial energies in Fe–Mn–(Al–Si) steels investigated by experiment and theory

(2014) D.T. Pierce et al.   ACTA MATERIALIA

Microstructure evolution and mechanical behavior of a new microalloyed high Mn austenitic steel during compressive deformation

(2014) M. Eskandari et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Enhanced Strength and Ductility in an Ultrafine-Grained Fe-22Mn-0.6C Austenitic Steel Having Fully Recrystallized Structure

(2014) Y. Z. Tian et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Annealing Temperature Dependence of the Tensile Behavior of 10 pct Mn Multi-phase TWIP-TRIP Steel

(2014) Sangwon Lee et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Deformation Mechanisms in Austenitic TRIP/TWIP Steel as a Function of Temperature

(2014) Stefan Martin et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Effect of the Strain Rate on the TRIP–TWIP Transition in Austenitic Fe-12 pct Mn-0.6 pct C TWIP Steel

(2013) Sangwon Lee et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Deformation behavior of duplex austenite and ε-martensite high-Mn steel

(2013) Ki Hyuk Kwon et al.   SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS

Revealing the strain-hardening behavior of twinning-induced plasticity steels: Theory, simulations, experiments

(2012) David R. Steinmetz et al.   ACTA MATERIALIA

Strain hardening behavior of a TRIP/TWIP steel with 18.8% Mn

(2010) Hao Ding et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Enhanced Mechanical Properties of a Novel High-Nitrogen Cr-Mn-Ni-Si Austenitic Stainless Steel via TWIP/TRIP Effects

(2009) M. Pozuelo et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE