Synthesis of Nanoparticles by Spark Discharge as a Facile and Versatile Technique of Preparing Highly Conductive Pt Nano-Ink for Printed Electronics

Flexible platinum electrodes as electrochemical sensor and immunosensor for Parkinson's disease biomarkers

(2020) Gabriela C. Mauruto de Oliveira et al.   BIOSENSORS & BIOELECTRONICS

Thin Dielectric Layer Enabled Low Voltage Operation of Fully Printed Flexible Carbon Nanotube Thin Film Transistors

(2020) Jialuo Chen et al.   NANOTECHNOLOGY

Printed Electronics as Prepared by Inkjet Printing

(2020) Vimanyu Beedasy et al.   Materials

Aerosol Jet Printing of Silver Lines with A High Aspect Ratio on A Heated Silicon Substrate

(2020) Alexey Efimov et al.   Materials

Ultraviolet Photodetecting and Plasmon-to-Electric Conversion of Controlled Inkjet-Printing Thin-Film Transistors

(2020) Cheng-Jyun Wang et al.   Nanomaterials

Gold, Silver and Iron Oxide Nanoparticles: Synthesis and Bionanoconjugation Strategies Aimed at Electrochemical Applications

(2020) Claudia Iriarte-Mesa et al.   Topics in Current Chemistry

High-Temperature Gas Sensor Based on Novel Pt Single Atoms@SnO2 Nanorods@SiC Nanosheets Multi-heterojunctions

(2020) Lian Sun et al.   ACS Applied Materials & Interfaces

Silver nanoparticle conductive inks: synthesis, characterization, and fabrication of inkjet-printed flexible electrodes

(2020) Iara J. Fernandes et al.   Scientific Reports

Various Coating Methodologies of WO3 According to the Purpose for Electrochromic Devices

(2020) Keon-Woo Kim et al.   Nanomaterials

A facile method for preparation of uniformly decorated-spherical SnO2 by CuO nanoparticles for highly responsive toluene detection at high temperature

(2020) Angga Hermawan et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Improved electroless platinum contacts on CdZnTe X- and γ-rays detectors

(2020) Manuele Bettelli et al.   Scientific Reports

Direct Patterned Zinc-Tin-Oxide for Solution-Processed Thin-Film Transistors and Complementary Inverter through Electrohydrodynamic Jet Printing

(2020) Heqing Ye et al.   Nanomaterials

Inkjet and Extrusion Printing for Electrochemical Energy Storage: A Minireview

(2020) Peihua Yang et al.   Advanced Materials Technologies

Aerosol-jet printing facilitates the rapid prototyping of microfluidic devices with versatile geometries and precise channel functionalization

(2020) Nordin Ćatić et al.   Applied Materials Today

A nonlocal spin Hall magnetoresistance in a platinum layer deposited on a magnon junction

(2020) C. Y. Guo et al.   Nature Electronics

Cost-effective silver nano-ink for inkjet printing in application of flexible electronic devices

(2020) Longchao Zhuo et al.   CHEMICAL PHYSICS LETTERS

A Review of Inkjet Printed Graphene and Carbon Nanotubes Based Gas Sensors

(2020) Twinkle Pandhi et al.   SENSORS

Controllable synthesis of grain boundary-enriched Pt nanoworms decorated on graphitic carbon nanosheets for ultrahigh methanol oxidation catalytic activity

(2020) Huajie Huang et al.   Journal of Energy Chemistry

Graphene Flakes for Electronic Applications: DC Plasma Jet-Assisted Synthesis

(2020) Irina V. Antonova et al.   Nanomaterials

Aerosol jet printing on paper substrate with conductive silver nano material

(2020) Yi-Dan Chen et al.   Journal of Manufacturing Processes

Inkjet-Printed Electronics on Paper for RF Identification (RFID) and Sensing

(2020) Sangkil Kim   Electronics

2D and 3D printing for graphene based supercapacitors and batteries: A review

(2020) Johannes P. Mensing et al.   Sustainable Materials and Technologies

Design and fabrication of a smart sensor using in silico epitope mapping and electro-responsive imprinted polymer nanoparticles for determination of insulin levels in human plasma

(2020) Alvaro Garcia Cruz et al.   BIOSENSORS & BIOELECTRONICS

A low temperature catalytic-type combustible gas sensor based on Pt supported zeolite catalyst films

(2020) Pan Wang et al.   Journal of Materials Science

One-step gold line fabrication from particle-free inorganic salt-based ink via atmospheric pressure nonequilibrium plasma-assisted inkjet printing

(2020) Kaishu Nitta et al.   MATERIALS CHEMISTRY AND PHYSICS

Conductive leaf vein networks produced via Ag nanoparticle self-assembly for potential applications of flexible sensor

(2020) Philip Keller et al.   MATERIALS LETTERS

Printing Conductive Nanomaterials for Flexible and Stretchable Electronics: A Review of Materials, Processes, and Applications

(2019) Qijin Huang et al.   Advanced Materials Technologies

Synthesis and Catalytic Properties of Modified Electrodes by Pulsed Electrodeposition of Pt/PANI Nanocomposite

(2019) Ali Ourari et al.   Materials

Controlled Synthesis of Surfactant‐Free Water‐Dispersible Colloidal Platinum Nanoparticles by the Co4Cat Process

(2019) Jonathan Quinson et al.   ChemSusChem

High Capacity Rate Capable Aerosol Jet Printed Li-Ion Battery Cathode

(2019) L. Jay Deiner et al.   ADVANCED ENGINEERING MATERIALS

A review of aerosol jet printing—a non-traditional hybrid process for micro-manufacturing

(2019) N. J. Wilkinson et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Measuring and optimization of energy transfer to the interelectrode gaps during the synthesis of nanoparticles in a spark discharge

(2019) Dmitry Mylnikov et al.   AEROSOL SCIENCE AND TECHNOLOGY

Enhancing adhesion properties between binder-free copper nanoink and flexible substrate using chemically generated interlocking structure

(2019) Chi Heon Cho et al.   APPLIED SURFACE SCIENCE

A spark discharge generator for scalable aerosol CVD synthesis of single-walled carbon nanotubes with tailored characteristics

(2019) Dmitry V. Krasnikov et al.   CHEMICAL ENGINEERING JOURNAL

Printed Strain Gauge on 3D and Low-Melting Point Plastic Surface by Aerosol Jet Printing and Photonic Curing

(2019) Michela Borghetti et al.   SENSORS

Stretchable and Washable Electroluminescent Display Screen-Printed on Textile

(2019) Daniel Janczak et al.   Nanomaterials

Technologies and Fabrication of Intelligent Packaging for Perishable Products

(2019) Lixing Wang et al.   Applied Sciences-Basel

Platinum and platinum oxide nanoparticles generated by unipolar spark discharge

(2019) Tomáš Němec et al.   JOURNAL OF AEROSOL SCIENCE

Inkjet‐Printed Micrometer‐Thick Perovskite Solar Cells with Large Columnar Grains

(2019) Helge Eggers et al.   Advanced Energy Materials

A Comprehensive Review on the Synthesis, Characterization, and Biomedical Application of Platinum Nanoparticles

(2019) Muniyandi Jeyaraj et al.   Nanomaterials

Cathodic Corrosion of a Bulk Wire to Nonaggregated Functional Nanocrystals and Nanoalloys

(2018) Jicheng Feng et al.   ACS Applied Materials & Interfaces

The role and fate of capping ligands in colloidally prepared metal nanoparticle catalysts

(2018) Liane M. Rossi et al.   DALTON TRANSACTIONS

The effect of circuit resistance on the particle output of a spark discharge nanoparticle generator

(2018) A. Kohut et al.   JOURNAL OF AEROSOL SCIENCE

Nanoink bridge-induced capillary pen printing for chemical sensors

(2018) Seong-Joong Kahng et al.   NANOTECHNOLOGY

Synthesis of Nanoparticles in a Pulsed-Periodic Gas Discharge and Their Potential Applications

(2018) V. V. Ivanov et al.   Russian Journal of Physical Chemistry A

Additive manufacturing of 96 MHz surface acoustic wave devices by means of superfine inkjet printing

(2018) B Kirbus et al.   Smart Materials and Structures

Formation and Characterization of Inkjet-Printed Nanosilver Lines on Plasma-Treated Glass Substrates

(2018) Jae-Sung Kwon et al.   Applied Sciences-Basel

A model for the particle mass yield in the aerosol synthesis of ultrafine monometallic nanoparticles by spark ablation

(2018) Maximilian Domaschke et al.   JOURNAL OF AEROSOL SCIENCE

Reducing Humidity Response of Gas Sensors for Medical Applications: Use of Spark Discharge Synthesis of Metal Oxide Nanoparticles

(2018) Alexey Vasiliev et al.   SENSORS

Noninvasive Material Thickness Detection by Aerosol Jet Printed Sensors Enhanced Through Metallic Carbon Nanotube Ink

(2017) Joseph B. Andrews et al.   IEEE SENSORS JOURNAL

Comparison of thermal decomposition and chemical reduction of particle-free silver ink for inkjet printing

(2017) Yuan Gu et al.   THIN SOLID FILMS

Aerosol-Jet-Assisted Thin-Film Growth of CH3 NH3 PbI3 Perovskites-A Means to Achieve High Quality, Defect-Free Films for Efficient Solar Cells

(2017) Santanu Bag et al.   Advanced Energy Materials

Controlled focusing of silver nanoparticles beam to form the microstructures on substrates

(2017) Alexey A. Efimov et al.   Results in Physics

High-temperature hydrogen sensor based on platinum nanoparticle-decorated SiC nanowire device

(2014) Jianjun Chen et al.   SENSORS AND ACTUATORS B-CHEMICAL

Effect of carrier gas composition on transferred arc metal nanoparticle synthesis

(2013) Matthias Stein et al.   JOURNAL OF NANOPARTICLE RESEARCH

Synthesis and characteristics of Ag/Pt bimetallic nanocomposites by arc-discharge solution plasma processing

(2012) Panuphong Pootawang et al.   NANOTECHNOLOGY

Hydrothermal Synthesis of Platinum-Group-Metal Nanoparticles by Using HEPES as a Reductant and Stabilizer

(2010) Man-Ho So et al.   Chemistry-An Asian Journal

Formation and Thermal Stability of Platinum Oxides on Size-Selected Platinum Nanoparticles: Support Effects

(2010) L. K. Ono et al.   Journal of Physical Chemistry C

Generation of nanoparticles by spark discharge

(2008) N. S. Tabrizi et al.   JOURNAL OF NANOPARTICLE RESEARCH